From: will.senn@gmail.com (Will Senn)
Subject: [TUHS] pre-more pager?
Date: Wed, 8 Nov 2017 16:18:37 -0600 [thread overview]
Message-ID: <f62c4780-3f21-2de9-4809-d7b25059ba82@gmail.com> (raw)
In-Reply-To: <CAC20D2PMX58fkxaeJ8_hziaBsrzTXTX-p0a5VjQLDO5B6FGarA@mail.gmail.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2998 bytes --]
Woohoo! I actually got it working :). Thanks for the assist. The 2bsd
version includes a retrofit.h file for it to work on v6. I removed the
include and it compiled and linked just fine.
Will
On 11/8/17 4:00 PM, Clem Cole wrote:
> fout and flush -- Looks like the V6 version of cr3 - which is using
> the portable C library which was done before the standard C library.
> I bet if you grab the one from 2BSD that should have been updated to V7
>
> On Wed, Nov 8, 2017 at 9:18 PM, Will Senn <will.senn at gmail.com
> <mailto:will.senn at gmail.com>> wrote:
>
> On 11/8/17 1:22 PM, Random832 wrote:
>
> Some of these are for V7 or V6 contemporary PDP-11 Unixes, and
> most of
> them are far simpler than more so you should have little
> difficulty
> getting them working anyway.
>
> Links:
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=1BSD/s6/cr3.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=1BSD/s6/cr3.c>
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=2BSD/src/cr3.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=2BSD/src/cr3.c>
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=2.9BSD/usr/src/ucb/more.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=2.9BSD/usr/src/ucb/more.c>
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=32V/usr/src/cmd/pg.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=32V/usr/src/cmd/pg.c>
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=AUSAM/source/S/pg.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=AUSAM/source/S/pg.c>
> (apparently unrelated to the 32V version)
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=SRI-NOSC/s2/pg.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=SRI-NOSC/s2/pg.c>
> http://minnie.tuhs.org/cgi-bin/utree.pl?file=OpenSolaris_b135/cmd/pg/pg.c
> <http://minnie.tuhs.org/cgi-bin/utree.pl?file=OpenSolaris_b135/cmd/pg/pg.c>
>
> https://danhalbert.org/more.html
> <https://danhalbert.org/more.html> - mentions cr3
>
>
> It makes sense that it used to be paper based and slow on screen.
>
> Regarding the links and old bsd's. The binary cr3 on 1bsd works in
> v7. Also, the book I'm reading has a c program that does paging.
> But, I'm always off down the rabbit hole... I tried to compile the
> cr3.c source and I get this error:
>
> # cc cr3.c
> Undefined:
> _fout
> _flush
> _getc
> _end
>
> My understanding is that cc includes libc by default, so these
> must not be in libc. But getc is standard lib, so what am I missing?
>
> Thanks,
>
> Will
>
> --
> GPG Fingerprint: 68F4 B3BD 1730 555A 4462 7D45 3EAA 5B6D A982 BAAF
>
>
--
GPG Fingerprint: 68F4 B3BD 1730 555A 4462 7D45 3EAA 5B6D A982 BAAF
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://minnie.tuhs.org/pipermail/tuhs/attachments/20171108/a2d2c2dc/attachment.html>
next prev parent reply other threads:[~2017-11-08 22:18 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-08 18:54 Will Senn
2017-11-08 18:59 ` Clem Cole
2017-11-08 19:06 ` Arthur Krewat
2017-11-08 19:31 ` Jeremy C. Reed
2017-11-08 22:43 ` Dave Horsfall
2017-11-08 22:47 ` Arthur Krewat
2017-11-08 23:21 ` Dave Horsfall
2017-11-09 4:38 ` Will Senn
2017-11-09 13:18 ` Dan Cross
2017-11-09 14:29 ` Will Senn
2017-11-09 20:53 ` Dave Horsfall
2017-11-10 0:15 ` Arthur Krewat
2017-11-10 2:14 ` Ralph Corderoy
2017-11-08 19:12 ` Bakul Shah
2017-11-08 19:22 ` Random832
2017-11-08 21:18 ` Will Senn
2017-11-08 21:59 ` Ron Natalie
2017-11-08 22:00 ` Clem Cole
2017-11-08 22:18 ` Will Senn [this message]
2017-11-09 2:01 ` Steve Johnson
2017-11-09 2:16 ` Lyndon Nerenberg
2017-11-08 19:29 ` Forrest, Jon
2017-11-08 19:43 ` Ron Natalie
2017-11-08 21:03 ` Mark Green
2017-11-08 19:23 Noel Chiappa
2017-11-08 20:02 Noel Chiappa
2017-11-08 20:11 ` Forrest, Jon
2017-11-10 5:26 ` Random832
2017-11-10 7:31 ` Otto Moerbeek
2017-11-08 20:18 ` Clem Cole
2017-11-08 20:28 ` Ron Natalie
2017-11-08 22:47 ` Dave Horsfall
2017-11-08 20:28 Noel Chiappa
2017-11-08 22:02 Paul Ruizendaal
2017-11-08 22:20 ` Will Senn
2017-11-08 22:58 Doug McIlroy
2017-11-09 13:33 Doug McIlroy
2017-11-09 16:19 Norman Wilson
2017-11-09 16:48 ` Arthur Krewat
2017-11-09 17:19 ` Steve Nickolas
2017-11-09 18:15 ` Don Hopkins
2017-11-09 18:26 ` Arthur Krewat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f62c4780-3f21-2de9-4809-d7b25059ba82@gmail.com \
--to=will.senn@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).