From bbe4fca31e9985cbd37d1bf2bd8c3f143cb769a2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=BCrgen=20Buchm=C3=BCller?= <pullmoll@t-online.de>
Date: Fri, 3 Apr 2020 20:02:39 +0200
Subject: [PATCH] New package: fah-7.5.1

Folding@Home debian packages collection which installs FAHClient service,
FAHControl, FAHCoreWrapper, and FAHViewer binaries.

The license of FAHClient does not allow redistribution thus set this
package to restricted.
---
 srcpkgs/fah/files/FAHClient/run  |   5 +
 srcpkgs/fah/files/config.example | 413 +++++++++++++++++++++++++++++++
 srcpkgs/fah/template             |  43 ++++
 3 files changed, 461 insertions(+)
 create mode 100755 srcpkgs/fah/files/FAHClient/run
 create mode 100644 srcpkgs/fah/files/config.example
 create mode 100644 srcpkgs/fah/template

diff --git a/srcpkgs/fah/files/FAHClient/run b/srcpkgs/fah/files/FAHClient/run
new file mode 100755
index 00000000000..a839b2d277f
--- /dev/null
+++ b/srcpkgs/fah/files/FAHClient/run
@@ -0,0 +1,5 @@
+#!/bin/sh
+OPTS=--run-as=_fah
+set -e
+[ -f config ] && . config
+cd /usr/libexec/_fah && exec /usr/bin/FAHClient $OPTS 2>&1
diff --git a/srcpkgs/fah/files/config.example b/srcpkgs/fah/files/config.example
new file mode 100644
index 00000000000..e963ea31e4c
--- /dev/null
+++ b/srcpkgs/fah/files/config.example
@@ -0,0 +1,413 @@
+# This is an example of configuration options for FAHClient.
+# If you want to configure the services, put this file
+# or a list of OTPS+=" ..." in a file /etc/sv/FAHClient/config
+
+#    The number of client processing threads.
+#OPTS+=" --client-threads=6"
+
+#    The maximum cycle frequency in Hz of client threads.
+#OPTS+=" --cycle-rate=4"
+
+#    Run at most this many cycles. A value less than zero means run indefinitely.
+#OPTS+=" --cycles=1"
+
+#    The directory, relative to the current directory, where WU data and cores
+#    are stored.
+#OPTS+=" --data-directory=."
+
+#    Attempt to keep the system from sleeping when folding, unless on battery.
+#OPTS+=" --disable-sleep-when-active"
+
+#    The directory, relative to the current executable, where executables and
+#    dynamic libraries are located.
+#OPTS+=" --exec-directory=/usr/bin"
+
+#    Exit when all slots are paused.
+#OPTS+=" --exit-when-done"
+
+#    Start folding even if not configured.
+#OPTS+=" --fold-anon"
+
+#    Number of seconds of system idle time before enabling idle folding. Set to
+#    zero to ignore system idle time.
+#OPTS+=" --idle-seconds=300"
+
+#    Make an operating system specific call to open the Web Control in a browser
+#    once client is fully loaded
+#OPTS+=" --open-web-control=fals"
+
+#    Rotate the configuration file to a backup when saving would overwrite the
+#    previous configuration.
+#OPTS+=" --config-rotate=false"
+
+#    Put rotated configs in this directory.
+#OPTS+=" --config-rotate-dir=configs"
+
+#    The maximum number of rotated configuration files to keep. A value of zero
+#    will keep all configuration file backups.
+#OPTS+=" --config-rotate-max=16"
+
+#    The maximum number of errors before a slot is paused.
+#OPTS+=" --max-slot-errors=10"
+
+#    The maximum number of errors before a work unit is dumped.
+#OPTS+=" --max-unit-errors=5"
+
+#    Tell cores to checkpoint at least every # minutes.
+#OPTS+=" --checkpoint=15"
+
+#    The directory to store core files in.
+#OPTS+=" --core-dir=cores"
+
+#    Run this command on cores after they are downloaded. This option is useful
+#    for running Linux cores on BSD machines.
+#OPTS+=" --core-prep=coreprep"
+
+#    Set the core priority. Valid values are: idle or low
+#OPTS+=" --core-priority=idle"
+
+#    If true, try to lock core processes to a fixed CPU
+#OPTS+=" --cpu-affinity=false"
+
+#    The maximum percentage of the CPU a core should use. Not implemented by all
+#    cores.
+#OPTS+=" --cpu-usage=100"
+
+#    GPU usage as a percent from 10-100
+#OPTS+=" --gpu-usage=100"
+
+#    Tell cores to disable optimized assembly code.
+#OPTS+=" --no-assembly=false"
+
+#    The cause you prefer to support.
+#OPTS+=" --cause=ANY"
+
+#    The client subtype
+#OPTS+=" --client-subtype=LINUX"
+
+#    The client type. Can be 'normal', 'advanced' or 'beta'.
+#OPTS+=" --client-type=normal"
+
+#    CPU species.
+#OPTS+=" --cpu-species=X86_AMD"
+
+#    CPU type.
+#OPTS+=" --cpu-type=AMD64"
+
+#    How many CPUs a slot should use. <= 0 will use all the CPUs detected in the
+#    system.
+#OPTS+=" --cpus=-1"
+
+#    The CUDA device index of the GPU, counting starts from 0.
+#OPTS+=" --cuda-index=0"
+
+#    Disable reading visualization data.
+#OPTS+=" --disable-viz"
+
+#    Pass extra arguments to the core.
+#OPTS+=" --extra-core-args=<string>"
+
+#    Enable or disable auto-confiugration of GPU slots, requires appropriate
+#    hardware.
+#OPTS+=" --gpu=true"
+
+#    The index of the GPU as detected by the client. This index corresponds
+#    directly to the GPUs listed in the client's '--info' output.
+#OPTS+=" --gpu-index=0"
+
+#    Max size in bytes of a work unit packet. Can be small=5MiB, normal=25MiB,
+#    big=500MiB or a number.
+#OPTS+=" --max-packet-size=normal"
+
+#    Override memory, in bytes, reported to Folding@home.
+#OPTS+=" --memory=2147483648"
+
+#    The OpenCL device index of the GPU, counting starts from 0.
+#OPTS+=" --opencl-index=0"
+
+#    Operating system species.
+#OPTS+=" --os-species=UNKNOWN"
+
+#    Operating system type.
+#OPTS+=" --os-type=LINUX"
+
+#    Key for access to restricted testing projects.
+#OPTS+=" --project-key=0"
+
+#    Enable or disable auto-configuration of SMP slots, requires appropriate
+#    hardware.
+#OPTS+=" --smp=true"
+
+#    Set to false to disable the GUI. A GUI is not currently supported on all
+#    operating systems.
+#OPTS+=" --gui-enabled=true"
+
+#    Client addresses which are allowed to connect to this server. This option
+#    overrides IPs which are denied in the deny option. The pattern 0/0 matches
+#    all addresses.
+#OPTS+=" --allow=127.0.0.1"
+
+#    The maximum amount of time, in seconds, a connection can be idle before
+#    being dropped.
+#OPTS+=" --connection-timeout=60"
+
+#    Client address which are not allowed to connect to this server.
+#OPTS+=" --deny=0/0"
+
+#    A space separated list of server address and port pairs to listen on in the
+#    form <ip | hostname>[:<port>]
+#OPTS+=" --http-addresses=0:7396"
+
+#    A space separated list of secure server address and port pairs to listen on
+#    in the form <ip | hostname>[:<port>]
+#OPTS+=" --https-addresses=localhost:4443"
+
+#    The maximum amount of time, in seconds, a client can be connected to the
+#    server.
+#OPTS+=" --max-connect-time=900"
+
+#    Sets the maximum number of simultaneous connections.
+#OPTS+=" --max-connections=800"
+
+#    Sets the maximum length of a client request packet.
+#OPTS+=" --max-request-length=52428800"
+
+#    The minimum amount of time, in seconds, a client must be connected to the
+#    server before it can be dropped in favor or a new connection.
+#OPTS+=" --min-connect-time=300"
+
+#    The servers certificate file in PEM format.
+#OPTS+=" --certificate-file=fah-cert.pem"
+
+#    Supply a Certificate Revocation List. Overrides any internal CRL
+#OPTS+=" --certificate-file=fah-cert.crl"
+
+#    The servers private key file in PEM format.
+#OPTS+=" --private-key-file=fah-private.pem"
+
+#    Set log file.
+#OPTS+=" --log=log.txt"
+
+#    Print log messages with ANSI color coding.
+#OPTS+=" --log-color=false"
+
+#    Print carriage return and line feed at end of log lines.
+#OPTS+=" --log-crlf=false"
+
+#    Print date information with log entries.
+#OPTS+=" --log-date=false"
+
+#    Print date to log before new log entries if so many seconds have passed
+#    since the last date was printed.
+#OPTS+=" --log-date-periodically=21600"
+
+#    Print domain information with log entries.
+#OPTS+=" --log-domain=false"
+
+#    Set log levels by domain. Format is:
+#      <domain>[:i|d|t]:<level> ...
+#    Entries are separated by white-space and or commas.
+#      i - info
+#    For example: server:i:3 module:6
+#    Set 'server' domain info messages to level 3 and 'module' info messages to
+#    level 6. All other domains will follow the system wide log verbosity level.
+#    If <level> is negative it is relative to the system wide verbosity.
+#OPTS+=" --log-domain-levels=server:i:3 module:6"
+
+#    Enable log message headers.
+#OPTS+=" --log-header=false"
+
+#    Print level information with log entries.
+#OPTS+=" --log-level=false"
+
+#    Don't print 'INFO(#):' in header.
+#OPTS+=" --log-no-info-header=false"
+
+#    Redirect all output to log file. Implies !log-to-screen.
+#OPTS+=" --log-redirect=false"
+
+#    Rotate log files on each run.
+#OPTS+=" --log-rotate=false"
+
+#    Put rotated logs in this directory.
+#OPTS+=" --log-rotate-dir=logs"
+
+#    Maximum number of rotated logs to keep.
+#OPTS+=" --log-rotate-max=16"
+
+#    Print shortened level information with log entries.
+#OPTS+=" --log-short-level=false"
+
+#    Remove any leading directories and trailing file extensions from domains so
+#    that source code file names can be easily used as log domains.
+#OPTS+=" --log-simple-domains=false"
+
+#    Print id with log entries.
+#OPTS+=" --log-thread-id=false"
+
+#    Print thread prefixes, if set, with log entries.
+#OPTS+=" --log-thread-prefix=false"
+
+#    Print time information with log entries.
+#OPTS+=" --log-time=false"
+
+#    Log to screen.
+#OPTS+=" --log-to-screen=false"
+
+#    Truncate log file.
+#OPTS+=" --log-truncate=false"
+
+#    Set logging level for INFO messages.
+#OPTS+=" --verbosity=3"
+
+#    Set proxy for outgoing HTTP connections
+#OPTS+=" --proxy=127.0.0.1:3128"
+
+#    Enable proxy configuration
+#OPTS+=" --proxy-enable=false"
+
+#    Set password for proxy connections
+#OPTS+=" --proxy-pass=proxypass"
+
+#    Set user name for proxy connections
+#OPTS+=" --proxy-user=proxyuser"
+
+#    Disable 'daemon', 'fork', 'pid' and 'respawn' options. Also defaults
+#    'log-to-screen' to false. Used internally.
+#OPTS+=" --child=false"
+
+#    Short for --pid --service --respawn --log='' --fork
+#OPTS+=" --daemon=false"
+
+#    Run in background.
+#OPTS+=" --fork=false"
+
+#    Create PID file.
+#OPTS+=" --pid=true"
+
+#    Name of PID file.
+#OPTS+=" --pid-file='Folding@home Client.pid'"
+
+#    Set the process priority. Valid values are: idle, low, normal, high or
+#    realtime.
+#OPTS+=" --priority=normal"
+
+#    Run the application as a child process and respawn if it is killed or exits.
+#OPTS+=" --respawn=false"
+
+#    Run as specified user
+#OPTS+=" --run-as=_fah"
+
+#    Ignore user logout or hangup and interrupt signals
+#OPTS+=" --service=false"
+
+#    The address to which the command server should be bound.
+#OPTS+=" --command-address=0.0.0.0"
+
+#    IP address ranges that are allowed access to the command server with out a
+#    password if the 'password' option is set. These addresses will also have to
+#    be allowed IP based access.
+#OPTS+=" --command-allow-no-pass=127.0.0.1"
+
+#    IP address ranges that are not allowed access to the command server with out
+#    a password if the 'password' option is set. Overridden by
+#    command-allow-no-pass
+#OPTS+=" --command-deny-no-pass=0/0"
+
+#    Set to false to disable the command server.
+#OPTS+=" --command-enable"
+
+#    The port to which the command server should be bound.
+#OPTS+=" --command-port=36330"
+
+#    Evaluate the argument as a script.
+#OPTS+=" --eval=false"
+
+#    Set a command server password. Warning, setting a password disables the
+#    default IP address blocking.
+#OPTS+=" --password=fahPassWord"
+
+#    Run commands from a script file.
+#OPTS+=" --script=script.cmd"
+
+#    Only run slot when idle.
+#OPTS+=" --idle=false"
+
+#    The maximum amount of time to wait in seconds for a unit to exit on
+#    shutdown.
+#OPTS+=" --max-shutdown-wait=60"
+
+#    Pause the client or slot when the OS indicates the machine is running on
+#    battery power.
+#OPTS+=" --pause-on-battery=true"
+
+#    If true the slot will be started in a paused state.
+#OPTS+=" --pause-on-start"
+
+#    True if slot is paused.
+#OPTS+=" --paused=false"
+
+#    Set the client's power level. Valid values are 'light', 'medium' or 'full'.
+#    This setting affects the defaults of several other options such as 'cpus',
+#    'pause-on-battery', etc.
+#OPTS+=" --power=medium"
+
+#    The machine ID.
+#OPTS+=" --machine-id=0"
+
+#    Your passkey.
+#OPTS+=" --passkey=yourpass.key"
+
+#    Your team number.
+#OPTS+=" --team=0"
+
+#    Your user name.
+#OPTS+=" --user=Anonymous"
+
+#    Client addresses which are allowed to connect to this Web server. This
+#    option overrides IPs which are denied in the web-deny option. This option
+#    differs from the 'allow'/'deny' options in that clients that are not allowed
+#    are served an access denied page rather than simply dropping the connection.
+#    The value '0/0' matches all IPs.
+#OPTS+=" --web-allow=127.0.0.1"
+
+#    Client address which are not allowed to connect to this Web server.
+#OPTS+=" --web-deny=0/0"
+
+#    Set to false to disable the web server.
+#OPTS+=" --web-enable"
+
+#    The name of the session cookie.
+#OPTS+=" --session-cookie=fah_sid"
+
+#    The maximum session lifetime in seconds. Zero for unlimited session
+#    lifetime.
+#OPTS+=" --session-lifetime=86400"
+
+#    The max maximum amount of time in seconds since the last time a session was
+#    used before it timesout. Zero for no session timeout.
+#OPTS+=" --session-timeout=3600"
+
+#    Dump units if their deadline has passed.
+#OPTS+=" --dump-after-deadline=false"
+
+#    Maximum units per slot in the work queue.
+#OPTS+=" --max-queue=16"
+
+#    Process at most this number of units, then pause.
+#OPTS+=" --max-units=0"
+
+#    Pre-download the next work unit when the current one is this far along.
+#    Values less than 90 are not allowed.
+#OPTS+=" --next-unit-percentage=99"
+
+#    Attempt to detect stalled work units and restart them.
+#OPTS+=" --stall-detection-enabled=false"
+
+#    Minimum estimated percent work unit completion since last frame before a WU
+#    can be considered stalled, if zero the percentage is ignored.
+#OPTS+=" --stall-percent=5"
+
+#    Minimum time, in seconds, since last frame before a WU can be considered
+#    stalled.
+#OPTS+=" --stall-timeout=1800"
diff --git a/srcpkgs/fah/template b/srcpkgs/fah/template
new file mode 100644
index 00000000000..18ac5ba4b08
--- /dev/null
+++ b/srcpkgs/fah/template
@@ -0,0 +1,43 @@
+# Template file for 'fah'
+pkgname=fah
+version=7.5.1
+revision=1
+archs="x86_64"
+hostmakedepends="python"
+depends="python desktop-file-utils hicolor-icon-theme"
+short_desc="Folding@home distributed computation power for research"
+maintainer="Jürgen Buchmüller <pullmoll@t-online.de>"
+license="custom:Proprietary"
+homepage="https://foldingathome.org"
+distfiles="https://download.foldingathome.org/releases/public/release/fahclient/debian-stable-64bit/v${version%.*}/fahclient_${version}_amd64.deb
+ https://download.foldingathome.org/releases/public/release/fahcontrol/debian-stable-64bit/v${version%.*}/fahcontrol_${version}-1_all.deb
+ https://download.foldingathome.org/releases/public/release/fahviewer/debian-stable-64bit/v${version%.*}/fahviewer_${version}_amd64.deb"
+checksum="efe47061d328667259c1815b98bc6c37da339363fb8e9386673f6a96f4d37d26
+ c9d37823abe666923d903fbf4d7c6059cf8042a208954bc0044c9c5a6635b4d8
+ c87d331a35fc68d04427996aef05b275ca69dab3bef4087efaaf5e27e95d7b29"
+nostrip=yes
+repository="nonfree"
+restricted=yes
+system_accounts="_fah"
+_fah_homedir="/usr/libexec/_fah"
+_fah_descr="Folding@Home user"
+
+do_extract() {
+	ar x ${XBPS_SRCDISTDIR}/${pkgname}-${version}/fahclient_${version}_amd64.deb
+	bsdtar xf data.tar.xz
+	ar x ${XBPS_SRCDISTDIR}/${pkgname}-${version}/fahcontrol_${version}-1_all.deb
+	bsdtar xf data.tar.xz
+	ar x ${XBPS_SRCDISTDIR}/${pkgname}-${version}/fahviewer_${version}_amd64.deb
+	bsdtar xf data.tar.xz
+}
+
+do_install() {
+	vmkdir usr
+	vcopy ${wrksrc}/usr/* usr
+	vsv FAHClient
+	mv -v ${DESTDIR}/usr/lib/python2.7/{dist,site}-packages
+	vlicense ${DESTDIR}/usr/share/doc/fahclient/copyright LICENSE.FAHClient
+	vlicense ${DESTDIR}/usr/share/doc/fahviewer/LICENSE LICENSE.FAHViewer
+	# Example file to modfiy or cut+paste from for /etc/sv/FAHClient/config
+	vsconf ${FILESDIR}/config.example
+}