Github messages for voidlinux
 help / color / mirror / Atom feed
* [PR PATCH] New package: droidcam-1.7.2.
@ 2021-03-23 16:54 ericonr
  2021-03-23 17:21 ` [PR PATCH] [Updated] " ericonr
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: ericonr @ 2021-03-23 16:54 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1694 bytes --]

There is a new pull request by ericonr against master on the void-packages repository

https://github.com/ericonr/void-packages droidcam
https://github.com/void-linux/void-packages/pull/29702

New package: droidcam-1.7.2.
Closes: #28972 [via git-merge-pr]

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

May still receive improvements by shipping the modprobing stuff.

A patch file from https://github.com/void-linux/void-packages/pull/29702.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-droidcam-29702.patch --]
[-- Type: text/x-diff, Size: 1520 bytes --]

From 505fd297f42c506913ea9da704a6f4730185e0e2 Mon Sep 17 00:00:00 2001
From: ibrokemypie <ibrokemypie@bastardi.net>
Date: Mon, 22 Feb 2021 23:45:17 +1100
Subject: [PATCH] New package: droidcam-1.7.2.

Closes: #28972 [via git-merge-pr]
---
 srcpkgs/droidcam/template | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 srcpkgs/droidcam/template

diff --git a/srcpkgs/droidcam/template b/srcpkgs/droidcam/template
new file mode 100644
index 000000000000..d91d9fce6690
--- /dev/null
+++ b/srcpkgs/droidcam/template
@@ -0,0 +1,27 @@
+# Template file for 'droidcam'
+pkgname=droidcam
+version=1.7.2
+revision=1
+build_style=gnu-makefile
+make_build_args="USBMUXD=-lusbmuxd-2.0 JPEG=-lturbojpeg"
+makedepends="pkg-config libjpeg-turbo-devel ffmpeg-devel alsa-lib-devel
+ speex-devel libusbmuxd-devel libplist-devel gtk+3-devel"
+depends="v4l2loopback"
+short_desc="Tool for using your android device as a wireless/usb webcam"
+maintainer="ibrokemypie <ibrokemypie@bastardi.net>"
+license="GPL-2.0-or-later"
+homepage="https://github.com/dev47apps/droidcam"
+distfiles="https://github.com/dev47apps/droidcam/archive/v${version}.tar.gz"
+checksum=ea93a56f5e2291ea8546d047bb89c54f4b3ded3786d176a79148a62aaa0765e3
+
+post_patch() {
+	vsed -e "s/^Icon=.*/Icon=droidcam-icon.png/" -i droidcam.desktop
+}
+
+do_install() {
+	vbin droidcam
+	vbin droidcam-cli
+	vinstall icon2.png 644 /usr/share/pixmaps/ droidcam-icon.png
+	vinstall droidcam.desktop 644 /usr/share/applications
+	vdoc README.md
+}

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PR PATCH] [Updated] New package: droidcam-1.7.2.
  2021-03-23 16:54 [PR PATCH] New package: droidcam-1.7.2 ericonr
@ 2021-03-23 17:21 ` ericonr
  2021-03-23 17:36 ` ericonr
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: ericonr @ 2021-03-23 17:21 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1699 bytes --]

There is an updated pull request by ericonr against master on the void-packages repository

https://github.com/ericonr/void-packages droidcam
https://github.com/void-linux/void-packages/pull/29702

New package: droidcam-1.7.2.
Closes: #28972 [via git-merge-pr]

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

May still receive improvements by shipping the modprobing stuff.

A patch file from https://github.com/void-linux/void-packages/pull/29702.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-droidcam-29702.patch --]
[-- Type: text/x-diff, Size: 1551 bytes --]

From 173944fd609226f91d4fabfa304ad33029291959 Mon Sep 17 00:00:00 2001
From: ibrokemypie <ibrokemypie@bastardi.net>
Date: Mon, 22 Feb 2021 23:45:17 +1100
Subject: [PATCH] New package: droidcam-1.7.2.

Closes: #28972 [via git-merge-pr]
---
 srcpkgs/droidcam/template | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 srcpkgs/droidcam/template

diff --git a/srcpkgs/droidcam/template b/srcpkgs/droidcam/template
new file mode 100644
index 000000000000..60a9d57ce081
--- /dev/null
+++ b/srcpkgs/droidcam/template
@@ -0,0 +1,28 @@
+# Template file for 'droidcam'
+pkgname=droidcam
+version=1.7.2
+revision=1
+build_style=gnu-makefile
+make_build_args="USBMUXD=-lusbmuxd-2.0 JPEG=-lturbojpeg"
+hostmakedepends="pkg-config"
+makedepends="pkg-config libjpeg-turbo-devel ffmpeg-devel alsa-lib-devel
+ speex-devel libusbmuxd-devel libplist-devel gtk+3-devel"
+depends="v4l2loopback"
+short_desc="Tool for using your android device as a wireless/usb webcam"
+maintainer="ibrokemypie <ibrokemypie@bastardi.net>"
+license="GPL-2.0-or-later"
+homepage="https://github.com/dev47apps/droidcam"
+distfiles="https://github.com/dev47apps/droidcam/archive/v${version}.tar.gz"
+checksum=ea93a56f5e2291ea8546d047bb89c54f4b3ded3786d176a79148a62aaa0765e3
+
+post_patch() {
+	vsed -e "s/^Icon=.*/Icon=droidcam-icon.png/" -i droidcam.desktop
+}
+
+do_install() {
+	vbin droidcam
+	vbin droidcam-cli
+	vinstall icon2.png 644 /usr/share/pixmaps/ droidcam-icon.png
+	vinstall droidcam.desktop 644 /usr/share/applications
+	vdoc README.md
+}

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PR PATCH] [Updated] New package: droidcam-1.7.2.
  2021-03-23 16:54 [PR PATCH] New package: droidcam-1.7.2 ericonr
  2021-03-23 17:21 ` [PR PATCH] [Updated] " ericonr
@ 2021-03-23 17:36 ` ericonr
  2021-03-23 17:41 ` ericonr
  2021-03-23 17:43 ` [PR PATCH] [Merged]: " ericonr
  3 siblings, 0 replies; 5+ messages in thread
From: ericonr @ 2021-03-23 17:36 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1699 bytes --]

There is an updated pull request by ericonr against master on the void-packages repository

https://github.com/ericonr/void-packages droidcam
https://github.com/void-linux/void-packages/pull/29702

New package: droidcam-1.7.2.
Closes: #28972 [via git-merge-pr]

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

May still receive improvements by shipping the modprobing stuff.

A patch file from https://github.com/void-linux/void-packages/pull/29702.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-droidcam-29702.patch --]
[-- Type: text/x-diff, Size: 1540 bytes --]

From 99f291867a75cbb9993216cb7bad82865a86e14b Mon Sep 17 00:00:00 2001
From: ibrokemypie <ibrokemypie@bastardi.net>
Date: Mon, 22 Feb 2021 23:45:17 +1100
Subject: [PATCH] New package: droidcam-1.7.2.

Closes: #28972 [via git-merge-pr]
---
 srcpkgs/droidcam/template | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 srcpkgs/droidcam/template

diff --git a/srcpkgs/droidcam/template b/srcpkgs/droidcam/template
new file mode 100644
index 000000000000..6a0ebf5890a6
--- /dev/null
+++ b/srcpkgs/droidcam/template
@@ -0,0 +1,28 @@
+# Template file for 'droidcam'
+pkgname=droidcam
+version=1.7.2
+revision=1
+build_style=gnu-makefile
+make_build_args="USBMUXD=-lusbmuxd-2.0 JPEG=-lturbojpeg"
+hostmakedepends="pkg-config"
+makedepends="pkg-config libjpeg-turbo-devel ffmpeg-devel alsa-lib-devel
+ speex-devel libusbmuxd-devel libplist-devel gtk+3-devel"
+depends="v4l2loopback"
+short_desc="Tool for using your android device as a wireless/usb webcam"
+maintainer="ibrokemypie <ibrokemypie@bastardi.net>"
+license="GPL-2.0-or-later"
+homepage="https://www.dev47apps.com/"
+distfiles="https://github.com/dev47apps/droidcam/archive/v${version}.tar.gz"
+checksum=ea93a56f5e2291ea8546d047bb89c54f4b3ded3786d176a79148a62aaa0765e3
+
+post_patch() {
+	vsed -e "s/^Icon=.*/Icon=droidcam-icon.png/" -i droidcam.desktop
+}
+
+do_install() {
+	vbin droidcam
+	vbin droidcam-cli
+	vinstall icon2.png 644 /usr/share/pixmaps/ droidcam-icon.png
+	vinstall droidcam.desktop 644 /usr/share/applications
+	vdoc README.md
+}

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PR PATCH] [Updated] New package: droidcam-1.7.2.
  2021-03-23 16:54 [PR PATCH] New package: droidcam-1.7.2 ericonr
  2021-03-23 17:21 ` [PR PATCH] [Updated] " ericonr
  2021-03-23 17:36 ` ericonr
@ 2021-03-23 17:41 ` ericonr
  2021-03-23 17:43 ` [PR PATCH] [Merged]: " ericonr
  3 siblings, 0 replies; 5+ messages in thread
From: ericonr @ 2021-03-23 17:41 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1699 bytes --]

There is an updated pull request by ericonr against master on the void-packages repository

https://github.com/ericonr/void-packages droidcam
https://github.com/void-linux/void-packages/pull/29702

New package: droidcam-1.7.2.
Closes: #28972 [via git-merge-pr]

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

May still receive improvements by shipping the modprobing stuff.

A patch file from https://github.com/void-linux/void-packages/pull/29702.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-droidcam-29702.patch --]
[-- Type: text/x-diff, Size: 1537 bytes --]

From 07b68120c6343e55dea97635c745f76773b79c83 Mon Sep 17 00:00:00 2001
From: ibrokemypie <ibrokemypie@bastardi.net>
Date: Mon, 22 Feb 2021 23:45:17 +1100
Subject: [PATCH] New package: droidcam-1.7.2.

Closes: #28972 [via git-merge-pr]
---
 srcpkgs/droidcam/template | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 srcpkgs/droidcam/template

diff --git a/srcpkgs/droidcam/template b/srcpkgs/droidcam/template
new file mode 100644
index 000000000000..665811688867
--- /dev/null
+++ b/srcpkgs/droidcam/template
@@ -0,0 +1,28 @@
+# Template file for 'droidcam'
+pkgname=droidcam
+version=1.7.2
+revision=1
+build_style=gnu-makefile
+make_build_args="USBMUXD=-lusbmuxd-2.0 JPEG=-lturbojpeg"
+hostmakedepends="pkg-config"
+makedepends="pkg-config libjpeg-turbo-devel ffmpeg-devel alsa-lib-devel
+ speex-devel libusbmuxd-devel libplist-devel gtk+3-devel"
+depends="v4l2loopback"
+short_desc="Tool for using your android device as a wireless/usb webcam"
+maintainer="ibrokemypie <ibrokemypie@bastardi.net>"
+license="GPL-2.0-or-later"
+homepage="https://www.dev47apps.com/"
+distfiles="https://github.com/dev47apps/droidcam/archive/v${version}.tar.gz"
+checksum=ea93a56f5e2291ea8546d047bb89c54f4b3ded3786d176a79148a62aaa0765e3
+
+post_patch() {
+	vsed -e "s/^Icon=.*/Icon=droidcam-icon.png/" -i droidcam.desktop
+}
+
+do_install() {
+	vbin droidcam
+	vbin droidcam-cli
+	vinstall icon2.png 644 usr/share/pixmaps droidcam-icon.png
+	vinstall droidcam.desktop 644 usr/share/applications
+	vdoc README.md
+}

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PR PATCH] [Merged]: New package: droidcam-1.7.2.
  2021-03-23 16:54 [PR PATCH] New package: droidcam-1.7.2 ericonr
                   ` (2 preceding siblings ...)
  2021-03-23 17:41 ` ericonr
@ 2021-03-23 17:43 ` ericonr
  3 siblings, 0 replies; 5+ messages in thread
From: ericonr @ 2021-03-23 17:43 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]

There's a merged pull request on the void-packages repository

New package: droidcam-1.7.2.
https://github.com/void-linux/void-packages/pull/29702

Description:
Closes: #28972 [via git-merge-pr]

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

May still receive improvements by shipping the modprobing stuff.

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-03-23 17:43 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-23 16:54 [PR PATCH] New package: droidcam-1.7.2 ericonr
2021-03-23 17:21 ` [PR PATCH] [Updated] " ericonr
2021-03-23 17:36 ` ericonr
2021-03-23 17:41 ` ericonr
2021-03-23 17:43 ` [PR PATCH] [Merged]: " ericonr

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).