From: ericonr <ericonr@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: Re: [PR PATCH] [Updated] ell 0.38 bluez 5.56
Date: Wed, 07 Apr 2021 17:46:44 +0200 [thread overview]
Message-ID: <20210407154644.E7CAscYz4RJQMK9JIWd0Mbpeu7a0BmIFf6HhQ1_cytw@z> (raw)
In-Reply-To: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-28488@inbox.vuxu.org>
[-- Attachment #1: Type: text/plain, Size: 1582 bytes --]
There is an updated pull request by ericonr against master on the void-packages repository
https://github.com/ericonr/void-packages ell
https://github.com/void-linux/void-packages/pull/28488
ell 0.38 bluez 5.56
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/28488.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-ell-28488.patch --]
[-- Type: text/x-diff, Size: 5855 bytes --]
From e7075b9bddbd1ed54bed457d708f9cf39dd1155a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=89rico=20Rolim?= <erico.erc@gmail.com>
Date: Thu, 4 Feb 2021 15:24:12 -0300
Subject: [PATCH 1/3] ell: update to 0.39.
Add warnings about ABI stability.
---
common/shlibs | 2 +-
srcpkgs/ell/template | 5 +++--
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/common/shlibs b/common/shlibs
index 42f37d8a08bc..8ae3931ab654 100644
--- a/common/shlibs
+++ b/common/shlibs
@@ -1005,7 +1005,7 @@ libgsm.so.1 libgsm-1.0.13_13
libcgroup.so.1 libcgroup-0.37.1_1
libxdg-basedir.so.1 libxdg-basedir-1.1.1_1
libev.so.4 libev-4.04_1
-libell.so.0 ell-0.20_1
+libell.so.0 ell-0.38_1
libgvnc-1.0.so.0 gtk-vnc-0.4.4_1
libgtk-vnc-2.0.so.0 gtk-vnc-0.4.4_1
libyaml-0.so.2 libyaml-0.1.4_1
diff --git a/srcpkgs/ell/template b/srcpkgs/ell/template
index 19634a337aa0..9c798a84e8ae 100644
--- a/srcpkgs/ell/template
+++ b/srcpkgs/ell/template
@@ -1,6 +1,7 @@
# Template file for 'ell'
+# ell ABI isn't stable! Always test dependants after updates and update common/shlibs
pkgname=ell
-version=0.36
+version=0.39
revision=1
build_style=gnu-configure
configure_args="--enable-glib"
@@ -12,7 +13,7 @@ maintainer="Érico Nogueira <ericonr@disroot.org>"
license="GPL-2.0-only"
homepage="https://01.org/ell"
distfiles="${KERNEL_SITE}/libs/${pkgname}/${pkgname}-${version}.tar.xz"
-checksum=2f99e743a235b1c834b19112e4e0283d02da93b863899381466cde47bf159cf6
+checksum=653e2e139e23ed31e03c56c05f15321a9e818e2dca00a315c18d2c7b72f15d08
# tests depend on kernel features
make_check=extended
From 003dcc9731a0cfc010f8044972e933cae2bc3b39 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=89rico=20Rolim?= <erico.erc@gmail.com>
Date: Fri, 26 Feb 2021 17:19:50 -0300
Subject: [PATCH 2/3] ofono: revbump for ell.
---
srcpkgs/ofono/template | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/srcpkgs/ofono/template b/srcpkgs/ofono/template
index 16695994583a..248e58d9502d 100644
--- a/srcpkgs/ofono/template
+++ b/srcpkgs/ofono/template
@@ -1,7 +1,7 @@
# Template file for 'ofono'
pkgname=ofono
version=1.31
-revision=1
+revision=2
build_style=gnu-configure
configure_args="--disable-bluez4 --enable-external-ell"
conf_files="/etc/ofono/phonesim.conf /etc/dbus-1/system.d/ofono.conf"
From ec33fdd8613dec2e7f5a70cb0e9835720a340379 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=89rico=20Rolim?= <erico.erc@gmail.com>
Date: Fri, 26 Feb 2021 17:19:43 -0300
Subject: [PATCH 3/3] bluez: update to 5.58.
Requested by paper42:
- add logging to services
- add experimental build option
---
srcpkgs/bluez/files/bluetooth-meshd/log/run | 1 +
srcpkgs/bluez/files/bluetooth-meshd/run | 3 ++-
srcpkgs/bluez/files/bluetoothd/log/run | 1 +
srcpkgs/bluez/files/bluetoothd/run | 3 ++-
srcpkgs/bluez/template | 12 +++++++-----
5 files changed, 13 insertions(+), 7 deletions(-)
create mode 120000 srcpkgs/bluez/files/bluetooth-meshd/log/run
create mode 120000 srcpkgs/bluez/files/bluetoothd/log/run
diff --git a/srcpkgs/bluez/files/bluetooth-meshd/log/run b/srcpkgs/bluez/files/bluetooth-meshd/log/run
new file mode 120000
index 000000000000..3a5b4a586051
--- /dev/null
+++ b/srcpkgs/bluez/files/bluetooth-meshd/log/run
@@ -0,0 +1 @@
+/usr/bin/vlogger
\ No newline at end of file
diff --git a/srcpkgs/bluez/files/bluetooth-meshd/run b/srcpkgs/bluez/files/bluetooth-meshd/run
index 752dbcc37bf7..2594d5fe56e4 100755
--- a/srcpkgs/bluez/files/bluetooth-meshd/run
+++ b/srcpkgs/bluez/files/bluetooth-meshd/run
@@ -1,3 +1,4 @@
#!/bin/sh
sv check dbus >/dev/null || exit 1
-exec /usr/libexec/bluetooth/bluetooth-meshd --nodetach >/dev/null
+exec 2>&1
+exec /usr/libexec/bluetooth/bluetooth-meshd --nodetach
diff --git a/srcpkgs/bluez/files/bluetoothd/log/run b/srcpkgs/bluez/files/bluetoothd/log/run
new file mode 120000
index 000000000000..3a5b4a586051
--- /dev/null
+++ b/srcpkgs/bluez/files/bluetoothd/log/run
@@ -0,0 +1 @@
+/usr/bin/vlogger
\ No newline at end of file
diff --git a/srcpkgs/bluez/files/bluetoothd/run b/srcpkgs/bluez/files/bluetoothd/run
index 2b96adcdcdc6..860fa4bf80b3 100755
--- a/srcpkgs/bluez/files/bluetoothd/run
+++ b/srcpkgs/bluez/files/bluetoothd/run
@@ -1,3 +1,4 @@
#!/bin/sh
sv check dbus >/dev/null || exit 1
-exec /usr/libexec/bluetooth/bluetoothd -n >/dev/null
+exec 2>&1
+exec /usr/libexec/bluetooth/bluetoothd -n
diff --git a/srcpkgs/bluez/template b/srcpkgs/bluez/template
index 80fcf51c85a0..2130b7340580 100644
--- a/srcpkgs/bluez/template
+++ b/srcpkgs/bluez/template
@@ -1,11 +1,12 @@
# Template file for 'bluez'
pkgname=bluez
-version=5.55
+version=5.58
revision=1
build_style=gnu-configure
configure_args="--with-udevdir=/usr/lib/udev --disable-systemd
--enable-sixaxis --enable-threads --enable-library --enable-deprecated
- --enable-external-ell $(vopt_enable mesh) $(vopt_enable nfc)"
+ --enable-external-ell $(vopt_enable mesh) $(vopt_enable nfc)
+ $(vopt_enable experimental)"
hostmakedepends="automake flex libtool pkg-config"
makedepends="cups-devel eudev-libudev-devel libglib-devel libical-devel
readline-devel ell-devel $(vopt_if mesh json-c-devel)"
@@ -14,19 +15,20 @@ maintainer="Doan Tran Cong Danh <congdanhqx@gmail.com>"
license="GPL-2.0-or-later, LGPL-2.1-or-later"
homepage="http://www.bluez.org/"
distfiles="${KERNEL_SITE}/bluetooth/$pkgname-$version.tar.xz"
-checksum=8863717113c4897e2ad3271fc808ea245319e6fd95eed2e934fae8e0894e9b88
+checksum=c8065e75a5eb67236849ef68a354b1700540305a8c88ef0a0fd6288f19daf1f1
conf_files="/etc/bluetooth/main.conf"
system_groups="bluetooth"
-build_options="mesh nfc"
patch_args="-Np1"
+build_options="mesh nfc experimental"
+
if [ "$XBPS_TARGET_LIBC" = musl ]; then
makedepends+=" musl-legacy-compat"
fi
post_patch() {
# Use system ell
- rm -rf ell/*
+ rm -r ell/*
}
pre_configure() {
next prev parent reply other threads:[~2021-04-07 15:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-04 18:24 [PR PATCH] ell: update to 0.37 ericonr
2021-02-04 18:29 ` [PR PATCH] [Updated] " ericonr
2021-02-04 18:49 ` [NOMERGE] nell: " ericonr
2021-02-04 18:58 ` ericonr
2021-02-05 2:00 ` [NOMERGE] ell: " sgn
2021-02-05 2:06 ` ericonr
2021-02-05 2:06 ` ericonr
2021-02-05 2:06 ` ericonr
2021-02-05 2:07 ` ericonr
2021-02-05 2:07 ` ericonr
2021-02-05 2:11 ` sgn
2021-02-05 2:13 ` sgn
2021-02-26 20:23 ` [PR PATCH] [Updated] " ericonr
2021-02-27 0:15 ` iwd 1.12 ell 0.38 bluez 5.56 sgn
2021-03-01 15:07 ` sgn
2021-03-01 15:09 ` sgn
2021-03-01 18:25 ` ericonr
2021-03-11 20:48 ` [PR PATCH] [Updated] " ericonr
2021-03-11 20:49 ` ericonr
2021-04-07 14:00 ` paper42
2021-04-07 14:15 ` paper42
2021-04-07 15:46 ` ericonr [this message]
2021-04-07 15:47 ` ericonr
2021-04-07 15:47 ` [PR PATCH] [Updated] " ericonr
2021-04-07 17:48 ` paper42
2021-04-10 11:01 ` paper42
2021-04-11 4:13 ` [PR PATCH] [Closed]: " ericonr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407154644.E7CAscYz4RJQMK9JIWd0Mbpeu7a0BmIFf6HhQ1_cytw@z \
--to=ericonr@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).