From: RunningDroid <RunningDroid@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: Re: [PR PATCH] [Updated] urlwatch: update to 2.23 and claim maintainership
Date: Mon, 19 Apr 2021 03:06:08 +0200 [thread overview]
Message-ID: <20210419010608.oye_PtgN7QMnGTqdGvmsm7cwj0ShSrFcaAmkptnh1ps@z> (raw)
In-Reply-To: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-30255@inbox.vuxu.org>
[-- Attachment #1: Type: text/plain, Size: 1608 bytes --]
There is an updated pull request by RunningDroid against master on the void-packages repository
https://github.com/RunningDroid/void-packages update_urlwatch
https://github.com/void-linux/void-packages/pull/30255
urlwatch: update to 2.23 and claim maintainership
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86-64 GLIBC)
- [x] I built this PR locally for these architectures (all crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
A patch file from https://github.com/void-linux/void-packages/pull/30255.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update_urlwatch-30255.patch --]
[-- Type: text/x-diff, Size: 8678 bytes --]
From 03d20d384a193683741ecebb760efed087734a7a Mon Sep 17 00:00:00 2001
From: RunningDroid <runningdroid@zoho.com>
Date: Sun, 18 Apr 2021 20:33:13 -0400
Subject: [PATCH 1/2] New Package: python3-jq
---
.../python3-jq/patches/build-system-fix.patch | 143 ++++++++++++++++++
srcpkgs/python3-jq/template | 28 ++++
2 files changed, 171 insertions(+)
create mode 100644 srcpkgs/python3-jq/patches/build-system-fix.patch
create mode 100644 srcpkgs/python3-jq/template
diff --git a/srcpkgs/python3-jq/patches/build-system-fix.patch b/srcpkgs/python3-jq/patches/build-system-fix.patch
new file mode 100644
index 000000000000..101555e15b21
--- /dev/null
+++ b/srcpkgs/python3-jq/patches/build-system-fix.patch
@@ -0,0 +1,143 @@
+Common subdirectories: jq.py-1.1.2/.github and jq.py-1.1.2.new/.github
+diff --color -u jq.py-1.1.2/pyproject.toml jq.py-1.1.2.new/pyproject.toml
+--- jq.py-1.1.2/pyproject.toml 2021-01-27 09:56:50.000000000 -0500
++++ jq.py-1.1.2.new/pyproject.toml 2021-04-18 13:30:37.287929598 -0400
+@@ -2,7 +2,6 @@
+ requires = [
+ "setuptools>=43",
+ "wheel",
+- "requests",
+- "certifi"
++ "Cython"
+ ]
+ build-backend = "setuptools.build_meta"
+diff --color -u jq.py-1.1.2/setup.py jq.py-1.1.2.new/setup.py
+--- jq.py-1.1.2/setup.py 2021-01-27 09:56:50.000000000 -0500
++++ jq.py-1.1.2.new/setup.py 2021-04-18 13:29:53.042760038 -0400
+@@ -1,113 +1,20 @@
+ #!/usr/bin/env python
+
+ import os
+-import subprocess
+-import tarfile
+-import shutil
+-import sysconfig
+
+-import requests
+ from setuptools import setup
+-from setuptools.command.build_ext import build_ext
+ from setuptools.extension import Extension
++from Cython.Build import cythonize
+
+
+-def urlretrieve(source_url, destination_path):
+- response = requests.get(source_url, stream=True)
+- if response.status_code != 200:
+- raise Exception("status code was: {}".format(response.status_code))
+-
+- with open(destination_path, "wb") as fileobj:
+- for chunk in response.iter_content(chunk_size=128):
+- fileobj.write(chunk)
+-
+-def path_in_dir(relative_path):
+- return os.path.abspath(os.path.join(os.path.dirname(__file__), relative_path))
+-
+-def dependency_path(relative_path):
+- return os.path.join(path_in_dir("_deps"), relative_path)
+-
+ def read(fname):
+ return open(os.path.join(os.path.dirname(__file__), fname)).read()
+
+
+-jq_lib_tarball_path = dependency_path("jq-lib-1.6.tar.gz")
+-jq_lib_dir = dependency_path("jq-1.6")
+-
+-oniguruma_version = "6.9.4"
+-oniguruma_lib_tarball_path = dependency_path("onig-{}.tar.gz".format(oniguruma_version))
+-oniguruma_lib_build_dir = dependency_path("onig-{}".format(oniguruma_version))
+-oniguruma_lib_install_dir = dependency_path("onig-install-{}".format(oniguruma_version))
+-
+-class jq_build_ext(build_ext):
+- def run(self):
+- if not os.path.exists(dependency_path(".")):
+- os.makedirs(dependency_path("."))
+- self._build_oniguruma()
+- self._build_libjq()
+- build_ext.run(self)
+-
+- def _build_oniguruma(self):
+- self._build_lib(
+- source_url="https://github.com/kkos/oniguruma/releases/download/v{0}/onig-{0}.tar.gz".format(oniguruma_version),
+- tarball_path=oniguruma_lib_tarball_path,
+- lib_dir=oniguruma_lib_build_dir,
+- commands=[
+- ["./configure", "CFLAGS=-fPIC", "--prefix=" + oniguruma_lib_install_dir],
+- ["make"],
+- ["make", "install"],
+- ])
+-
+-
+- def _build_libjq(self):
+- self._build_lib(
+- source_url="https://github.com/stedolan/jq/releases/download/jq-1.6/jq-1.6.tar.gz",
+- tarball_path=jq_lib_tarball_path,
+- lib_dir=jq_lib_dir,
+- commands=[
+- ["./configure", "CFLAGS=-fPIC -pthread", "--disable-maintainer-mode", "--with-oniguruma=" + oniguruma_lib_install_dir],
+- ["make"],
+- ])
+-
+- def _build_lib(self, source_url, tarball_path, lib_dir, commands):
+- self._download_tarball(
+- source_url=source_url,
+- tarball_path=tarball_path,
+- lib_dir=lib_dir,
+- )
+-
+- macosx_deployment_target = sysconfig.get_config_var("MACOSX_DEPLOYMENT_TARGET")
+- if macosx_deployment_target:
+- os.environ['MACOSX_DEPLOYMENT_TARGET'] = str(macosx_deployment_target)
+-
+- def run_command(args):
+- print("Executing: %s" % ' '.join(args))
+- subprocess.check_call(args, cwd=lib_dir)
+-
+- for command in commands:
+- run_command(command)
+-
+- def _download_tarball(self, source_url, tarball_path, lib_dir):
+- if os.path.exists(tarball_path):
+- os.unlink(tarball_path)
+- print("Downloading {}".format(source_url))
+- urlretrieve(source_url, tarball_path)
+- print("Downloaded {}".format(source_url))
+-
+- if os.path.exists(lib_dir):
+- shutil.rmtree(lib_dir)
+- tarfile.open(tarball_path, "r:gz").extractall(dependency_path("."))
+-
+-
+ jq_extension = Extension(
+ "jq",
+ sources=["jq.c"],
+- include_dirs=[os.path.join(jq_lib_dir, "src")],
+- extra_link_args=["-lm"],
+- extra_objects=[
+- os.path.join(jq_lib_dir, ".libs/libjq.a"),
+- os.path.join(oniguruma_lib_install_dir, "lib/libonig.a"),
+- ],
++ libraries=["jq"]
+ )
+
+ setup(
+@@ -119,8 +26,7 @@
+ url='http://github.com/mwilliamson/jq.py',
+ python_requires='>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*',
+ license='BSD 2-Clause',
+- ext_modules = [jq_extension],
+- cmdclass={"build_ext": jq_build_ext},
++ ext_modules=cythonize("jq.pyx", compiler_directives={'language_level': 3}),
+ classifiers=[
+ 'Development Status :: 5 - Production/Stable',
+ 'Intended Audience :: Developers',
+Common subdirectories: jq.py-1.1.2/tests and jq.py-1.1.2.new/tests
diff --git a/srcpkgs/python3-jq/template b/srcpkgs/python3-jq/template
new file mode 100644
index 000000000000..82e1928f603a
--- /dev/null
+++ b/srcpkgs/python3-jq/template
@@ -0,0 +1,28 @@
+# Template file for 'python3-jq'
+pkgname=python3-jq
+version=1.1.2
+revision=1
+wrksrc="jq.py-${version}"
+build_style=python3-module
+makedepends="jq-devel python3-Cython python3-devel"
+depends="jq-devel"
+checkdepends="python3-nose"
+short_desc="Python bindings for jq"
+maintainer="RunningDroid <runningdroid@zoho.com>"
+license="BSD-2-Clause"
+homepage="https://github.com/mwilliamson/jq.py"
+distfiles="https://github.com/mwilliamson/jq.py/archive/refs/tags/${version}.tar.gz"
+checksum=55668335bc6b121a2c4e929b6332b2e6f6c3cea7a57f20cc364e1c5dc07d6fb5
+patch_args="-Np1"
+
+# fail at linktime so it doesn't fail at runtime
+LDFLAGS="${LDFLAGS}-Xlinker --require-defined=jv_object_iter_key"
+
+post_build() {
+ vlicense LICENSE
+}
+
+do_check() {
+ # the tests assume jq is available to import at this point
+ PYTHONPATH='build/lib.linux-x86_64-3.9/' nosetests3 tests
+}
From 89d273e98e68cc69482a75ac8e53ba2826a435ca Mon Sep 17 00:00:00 2001
From: Seth <runningdroid@zoho.com>
Date: Thu, 15 Apr 2021 02:40:44 -0400
Subject: [PATCH 2/2] urlwatch: update to 2.23 and claim maintainership
---
srcpkgs/urlwatch/template | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/urlwatch/template b/srcpkgs/urlwatch/template
index b03f00c3418b..016959b1c06f 100644
--- a/srcpkgs/urlwatch/template
+++ b/srcpkgs/urlwatch/template
@@ -1,7 +1,7 @@
# Template file for 'urlwatch'
pkgname=urlwatch
-version=2.21
-revision=2
+version=2.23
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
depends="python3-appdirs python3-keyring python3-minidb python3-requests
@@ -9,13 +9,13 @@ depends="python3-appdirs python3-keyring python3-minidb python3-requests
# Check the Docs for optional packages:
# https://urlwatch.readthedocs.io/en/latest/dependencies.html#optional-packages
checkdepends="python3-pytest python3-pycodestyle python3-docutils
- python3-Pygments ${depends}"
+ python3-Pygments python3-jq ${depends}"
short_desc="Tool for monitoring webpages for updates"
-maintainer="Orphaned <orphan@voidlinux.org>"
+maintainer="RunningDroid <runningdroid@zoho.com>"
license="BSD-3-Clause"
homepage="https://thp.io/2008/urlwatch/"
distfiles="${PYPI_SITE}/u/urlwatch/urlwatch-${version}.tar.gz"
-checksum=c259e0169cc99114b54470d08a8312473159dfdbed1d712d1a222fd8a9d7291a
+checksum=73a29efbef80c02bc8c285fca427793979c0e4bef40bc084df5de5436378b842
do_check() {
# skip the tests that require python modules that aren't packaged
next prev parent reply other threads:[~2021-04-19 1:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 19:26 [PR PATCH] " RunningDroid
2021-04-15 19:37 ` RunningDroid
2021-04-15 20:45 ` RunningDroid
2021-04-16 13:59 ` RunningDroid
2021-04-16 14:18 ` [PR REVIEW] " ericonr
2021-04-17 0:31 ` FollieHiyuki
2021-04-19 0:58 ` [PR PATCH] [Updated] " RunningDroid
2021-04-19 1:03 ` RunningDroid
2021-04-19 1:06 ` RunningDroid [this message]
2021-04-19 1:48 ` RunningDroid
2021-04-21 15:32 ` ericonr
2021-04-21 15:37 ` ericonr
2021-04-22 2:08 ` RunningDroid
2021-04-22 2:10 ` [PR PATCH] [Updated] " RunningDroid
2021-04-22 2:16 ` RunningDroid
2021-04-23 19:02 ` [PR PATCH] [Merged]: " ericonr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210419010608.oye_PtgN7QMnGTqdGvmsm7cwj0ShSrFcaAmkptnh1ps@z \
--to=runningdroid@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).