From: jirutka <jirutka@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: Re: [PR PATCH] [Updated] New package: rtw89-dkms
Date: Mon, 12 Jul 2021 12:42:24 +0200 [thread overview]
Message-ID: <20210712104224.N4yWpbNaYJFlUKQEO7x6jPSb0OQThxd4jlfcfM9fH-k@z> (raw)
In-Reply-To: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-31900@inbox.vuxu.org>
[-- Attachment #1: Type: text/plain, Size: 1588 bytes --]
There is an updated pull request by jirutka against master on the void-packages repository
https://github.com/jirutka/void-packages rtw89
https://github.com/void-linux/void-packages/pull/31900
New package: rtw89-dkms
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/31900.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-rtw89-31900.patch --]
[-- Type: text/x-diff, Size: 2210 bytes --]
From 366d1f0463258e6a6b6f65b5571f2375c4e54641 Mon Sep 17 00:00:00 2001
From: Jakub Jirutka <jakub@jirutka.cz>
Date: Sun, 11 Jul 2021 00:27:11 +0200
Subject: [PATCH] New package: rtw89-dkms
---
srcpkgs/rtw89-dkms/files/dkms.conf | 9 +++++++++
srcpkgs/rtw89-dkms/template | 31 ++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 srcpkgs/rtw89-dkms/files/dkms.conf
create mode 100644 srcpkgs/rtw89-dkms/template
diff --git a/srcpkgs/rtw89-dkms/files/dkms.conf b/srcpkgs/rtw89-dkms/files/dkms.conf
new file mode 100644
index 000000000000..48001354ff39
--- /dev/null
+++ b/srcpkgs/rtw89-dkms/files/dkms.conf
@@ -0,0 +1,9 @@
+PACKAGE_NAME="rtw89"
+PACKAGE_VERSION="@@VERSION@@"
+MAKE[0]="make -C $kernel_source_dir M=$dkms_tree/$PACKAGE_NAME/$PACKAGE_VERSION/build modules"
+CLEAN="make -C $kernel_source_dir M=$dkms_tree/$PACKAGE_NAME/$PACKAGE_VERSION/build clean"
+BUILT_MODULE_NAME[0]="${PACKAGE_NAME}core"
+BUILT_MODULE_NAME[1]="${PACKAGE_NAME}pci"
+DEST_MODULE_LOCATION[0]=/kernel/drivers/net/wireless/realtek/rtw89
+DEST_MODULE_LOCATION[1]=/kernel/drivers/net/wireless/realtek/rtw89
+AUTOINSTALL=yes
diff --git a/srcpkgs/rtw89-dkms/template b/srcpkgs/rtw89-dkms/template
new file mode 100644
index 000000000000..e920f0df1b2a
--- /dev/null
+++ b/srcpkgs/rtw89-dkms/template
@@ -0,0 +1,31 @@
+# Template file for 'rtw89-dkms'
+pkgname=rtw89-dkms
+_pkgname=rtw89
+_gitrev=f4d5218d4db96c8f58ffc2ace0a31d8e2e2537c1
+version=5+git20210707
+revision=1
+archs="i686 x86_64*"
+wrksrc="rtw89-$_gitrev"
+short_desc="Driver for Realtek 8852AE, an 802.11ax device"
+maintainer="Jakub Jirutka <jakub@jirutka.cz>"
+license="GPL-2.0-or-later"
+homepage="https://github.com/lwfinger/rtw89"
+distfiles="$homepage/archive/$_gitrev/$pkgname-$_gitrev.tar.gz"
+checksum=6d3f5ebf46e03aa4ac0af1a1194b34c9b91b21e853ca7761ab89265479ddde4a
+
+dkms_modules="$_pkgname $version"
+depends="dkms"
+
+do_install() {
+ local targetdir="usr/src/$_pkgname-$version"
+
+ vmkdir $targetdir
+ vcopy Makefile $targetdir
+ vcopy '*.c' $targetdir
+ vcopy '*.h' $targetdir
+
+ vcopy $FILESDIR/dkms.conf $targetdir
+ sed -i "s/@@VERSION@@/${version}/" "$DESTDIR"/$targetdir/dkms.conf
+
+ vdoc README.md
+}
next prev parent reply other threads:[~2021-07-12 10:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-10 22:42 [PR PATCH] " jirutka
2021-07-10 23:06 ` [PR PATCH] [Updated] " jirutka
2021-07-12 10:42 ` jirutka [this message]
2022-05-25 2:15 ` github-actions
2022-06-09 2:11 ` [PR PATCH] [Closed]: " github-actions
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712104224.N4yWpbNaYJFlUKQEO7x6jPSb0OQThxd4jlfcfM9fH-k@z \
--to=jirutka@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).