Github messages for voidlinux
 help / color / mirror / Atom feed
* [PR PATCH] hplip: Update to 3.21.8
@ 2021-10-30 18:07 heindsight
  2021-10-31  8:40 ` biopsin
                   ` (13 more replies)
  0 siblings, 14 replies; 15+ messages in thread
From: heindsight @ 2021-10-30 18:07 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1676 bytes --]

There is a new pull request by heindsight against master on the void-packages repository

https://github.com/heindsight/void-packages hplip
https://github.com/void-linux/void-packages/pull/33832

hplip: Update to 3.21.8
Update hplip to latest upstream version and patch to fix Python 3.10 compatibility.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33832.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hplip-33832.patch --]
[-- Type: text/x-diff, Size: 15812 bytes --]

From 8a65088e5a93ed83416610c184ed208fb52642f3 Mon Sep 17 00:00:00 2001
From: Heinrich Kruger <heindsight@kruger.dev>
Date: Wed, 20 Oct 2021 09:18:02 +0100
Subject: [PATCH] hplip: Update to 3.21.8

Update hplip to latest upstream version and patch to fix Python 3.10
compatibility.
---
 ...Processor-functionality-which-is-clo.patch | 113 ------------------
 ...emove-ImageProcessor-binary-installs.patch |  47 ++++++++
 srcpkgs/hplip/patches/gzip_text.patch         |  13 ++
 srcpkgs/hplip/patches/pysizet_clean.patch     | 100 ++++++++++++++++
 srcpkgs/hplip/patches/sane.patch              |  31 -----
 srcpkgs/hplip/template                        |   7 +-
 6 files changed, 164 insertions(+), 147 deletions(-)
 delete mode 100644 srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
 create mode 100644 srcpkgs/hplip/patches/0028-Remove-ImageProcessor-binary-installs.patch
 create mode 100644 srcpkgs/hplip/patches/gzip_text.patch
 create mode 100644 srcpkgs/hplip/patches/pysizet_clean.patch
 delete mode 100644 srcpkgs/hplip/patches/sane.patch

diff --git a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch b/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
deleted file mode 100644
index 8d3b4d7bfda2..000000000000
--- a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From fa9c0cf1a5db9bf8880b4796d5e3e0da46534e3d Mon Sep 17 00:00:00 2001
-From: Didier Raboud <odyx@debian.org>
-Date: Tue, 21 Aug 2018 18:18:10 +0200
-Subject: Remove all ImageProcessor functionality, which is closed-source
-
----
- Makefile.am                  | 14 ++------------
- prnt/hpcups/HPCupsFilter.cpp | 21 ---------------------
- 2 files changed, 2 insertions(+), 33 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index 1b097c4f9..8d5d78c9f 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -166,7 +166,7 @@ if !HPLIP_CLASS_DRIVER
- dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
- endif #HPLIP_CLASS_DRIVER
- 
--dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
-+dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
- dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
- 
- if !HPLIP_CLASS_DRIVER
-@@ -594,7 +594,7 @@ hpcups_SOURCES = prnt/hpcups/HPCupsFilter.cpp prnt/hpcups/HPCupsFilter.h prnt/hp
- 	prnt/hpcups/ImageProcessor.h
- 
- hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
--hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
-+hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
- #else
- #hpcupsdir = $(cupsfilterdir)
- #hpcups_PROGRAMS = hpcups
-@@ -686,16 +686,6 @@ endif #HPLIP_CLASS_DRIVER
- 
- install-data-hook:
- if HPLIP_BUILD
--	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
--	fi; \
--	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
--	fi
- if !HPLIP_CLASS_DRIVER
- #	   If scanner build, add hpaio entry to sane dll.conf.
- 	if [ "$(scan_build)" = "yes" ]; then \
-diff --git a/prnt/hpcups/HPCupsFilter.cpp b/prnt/hpcups/HPCupsFilter.cpp
-index 5b282d83f..0bacfafac 100644
---- a/prnt/hpcups/HPCupsFilter.cpp
-+++ b/prnt/hpcups/HPCupsFilter.cpp
-@@ -31,7 +31,6 @@
- \*****************************************************************************/
- 
- #include "HPCupsFilter.h"
--#include "ImageProcessor.h"
- 
- #include <signal.h>
- #include <sys/wait.h>
-@@ -637,16 +636,10 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
- 
- 
-     sprintf(hpPreProcessedRasterFile, "%s/hp_%s_cups_SwapedPagesXXXXXX",CUPS_TMP_DIR, m_JA.user_name);
--    image_processor_t* imageProcessor = imageProcessorCreate();
- 
-     while (cupsRasterReadHeader2(cups_raster, &cups_header))
-     {
- 
--        IMAGE_PROCESSOR_ERROR result = imageProcessorStartPage(imageProcessor, &cups_header);
--        if (result != IPE_SUCCESS){
--            dbglog("DEBUG: imageProcessorStartPage failed result = %d\n", result);
--        }
--
-         current_page_number++;
- 
-         if (current_page_number == 1) {
-@@ -745,12 +738,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             color_raster = rgbRaster;
-             black_raster = kRaster;
- 
--            result = imageProcessorProcessLine(imageProcessor, m_pPrinterBuffer, cups_header.cupsBytesPerLine);
--            if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorProcessLine failed result = %d\n", result);
--            }
--
--
-             if ((y == 0) && !is_ljmono) {
-                 //For ljmono, make sure that first line is not a blankRaster line.Otherwise printer
-                 //may not skip blank lines before actual data
-@@ -780,12 +767,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             }
-         }  // for() loop end
- 
--        result = imageProcessorEndPage(imageProcessor);
--        if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorEndPage failed result = %d\n", result);
--        }
--
--
-         m_Job.NewPage();
-         if (err != NO_ERROR) {
-             break;
-@@ -800,8 +781,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-         rgbRaster = NULL;
-     }
- 
--    imageProcessorDestroy(imageProcessor);
--
-     unlink(hpPreProcessedRasterFile);
-     return ret_status;
- }
diff --git a/srcpkgs/hplip/patches/0028-Remove-ImageProcessor-binary-installs.patch b/srcpkgs/hplip/patches/0028-Remove-ImageProcessor-binary-installs.patch
new file mode 100644
index 000000000000..cad59a7a6e2e
--- /dev/null
+++ b/srcpkgs/hplip/patches/0028-Remove-ImageProcessor-binary-installs.patch
@@ -0,0 +1,47 @@
+From: Didier Raboud <odyx@debian.org>
+Date: Tue, 21 Aug 2018 18:18:10 +0200
+Subject: Remove ImageProcessor binary installs
+
+---
+ Makefile.am | 14 ++------------
+ 1 file changed, 2 insertions(+), 12 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index c707e1e..0d8b692 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -167,7 +167,7 @@ if !HPLIP_CLASS_DRIVER
+ dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
+ endif #HPLIP_CLASS_DRIVER
+ 
+-dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
++dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
+ dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
+ 
+ if !HPLIP_CLASS_DRIVER
+@@ -595,7 +595,7 @@ hpcups_SOURCES = prnt/hpcups/HPCupsFilter.cpp prnt/hpcups/HPCupsFilter.h prnt/hp
+ 	prnt/hpcups/ImageProcessor.h
+ 
+ hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
+-hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
++hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
+ #else
+ #hpcupsdir = $(cupsfilterdir)
+ #hpcups_PROGRAMS = hpcups
+@@ -687,16 +687,6 @@ endif #HPLIP_CLASS_DRIVER
+ 
+ install-data-hook:
+ if HPLIP_BUILD
+-	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
+-	fi; \
+-	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
+-	fi
+ if !HPLIP_CLASS_DRIVER
+ #	   If scanner build, add hpaio entry to sane dll.conf.
+ 	if [ "$(scan_build)" = "yes" ]; then \
diff --git a/srcpkgs/hplip/patches/gzip_text.patch b/srcpkgs/hplip/patches/gzip_text.patch
new file mode 100644
index 000000000000..8309415a2a7a
--- /dev/null
+++ b/srcpkgs/hplip/patches/gzip_text.patch
@@ -0,0 +1,13 @@
+Open gzipped PPD file in text mode, otherwise text regex search fails
+
+--- a/setup.py	2021-10-18 18:37:49.795887272 +0100
++++ b/setup.py	2021-10-18 18:37:20.214898473 +0100
+@@ -552,7 +552,7 @@
+                         if os.path.exists(file_path) and os.path.isfile(file_path):
+ 
+                             if file_path.endswith('.gz'):
+-                                nickname = gzip.GzipFile(file_path, 'r').read(4096)
++                                nickname = gzip.open(file_path, 'rt').read(4096)
+                             else:
+                                 nickname = open(file_path, 'r').read(4096)
+ 
diff --git a/srcpkgs/hplip/patches/pysizet_clean.patch b/srcpkgs/hplip/patches/pysizet_clean.patch
new file mode 100644
index 000000000000..38d21f520934
--- /dev/null
+++ b/srcpkgs/hplip/patches/pysizet_clean.patch
@@ -0,0 +1,100 @@
+Based on patch by Zdenek Dohnal obtained from
+https://bugs.launchpad.net/hplip/+bug/1933973
+
+diff -pru hplip-3.21.8/io/mudext/hpmudext.c hplip-3.21.8-patched/io/mudext/hpmudext.c
+--- hplip-3.21.8/io/mudext/hpmudext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/io/mudext/hpmudext.c	2021-10-22 08:30:38.600922861 +0100
+@@ -24,6 +24,8 @@ Authors: Don Welch, David Suffield, Naga
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <stdarg.h>
+ #include "hpmud.h"
+@@ -187,14 +189,22 @@ static PyObject *write_channel(PyObject
+     HPMUD_CHANNEL cd;
+     int timeout = 30;
+     char * buf;
+-    int buf_size = 0;
++    Py_ssize_t buf_size = 0;
++    int buf_size_asInt = 0;
+     int bytes_written = 0;
+ 
+     if (!PyArg_ParseTuple(args, "iis#|i", &dd, &cd, &buf, &buf_size, &timeout))
+         return NULL;
+ 
++    if (buf_size < INT_MIN)
++      buf_size_asInt = INT_MIN;
++    else if (buf_size > INT_MAX)
++      buf_size_asInt = INT_MAX;
++    else
++      buf_size_asInt = (int)buf_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_write_channel(dd, cd, buf, buf_size,  timeout, &bytes_written);
++    result = hpmud_write_channel(dd, cd, buf, buf_size_asInt,  timeout, &bytes_written);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, bytes_written);
+@@ -231,14 +241,22 @@ static PyObject *set_pml(PyObject *self,
+     char * oid;
+     int type;
+     char * data;
+-    int data_size;
++    Py_ssize_t data_size = 0;
++    int data_size_asInt = 0;
+     int pml_result;
+ 
+     if (!PyArg_ParseTuple(args, "iisis#", &dd, &cd, &oid, &type, &data, &data_size))
+         return NULL;
+ 
++    if (data_size < INT_MIN)
++      data_size_asInt = INT_MIN;
++    else if (data_size > INT_MAX)
++      data_size_asInt = INT_MAX;
++    else
++      data_size_asInt = (int)data_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size, &pml_result);
++    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size_asInt, &pml_result);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, pml_result);
+diff -pru hplip-3.21.8/pcard/pcardext/pcardext.c hplip-3.21.8-patched/pcard/pcardext/pcardext.c
+--- hplip-3.21.8/pcard/pcardext/pcardext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/pcard/pcardext/pcardext.c	2021-10-22 08:24:11.010798381 +0100
+@@ -24,6 +24,8 @@ Author: Don Welch
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <structmember.h>
+ #include "../fat.h"
+diff -pru hplip-3.21.8/prnt/cupsext/cupsext.c hplip-3.21.8-patched/prnt/cupsext/cupsext.c
+--- hplip-3.21.8/prnt/cupsext/cupsext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/prnt/cupsext/cupsext.c	2021-10-22 08:26:30.975843330 +0100
+@@ -73,6 +73,7 @@ Yashwant Kumar Sahu
+ Sanjay Kumar
+ */
+ 
++#define PY_SSIZE_T_CLEAN
+ 
+ #include <Python.h>
+ #include <structmember.h>
+diff -pru hplip-3.21.8/scan/scanext/scanext.c hplip-3.21.8-patched/scan/scanext/scanext.c
+--- hplip-3.21.8/scan/scanext/scanext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/scan/scanext/scanext.c	2021-10-21 21:31:23.074739743 +0100
+@@ -45,6 +45,8 @@ PERFORMANCE OF THIS SOFTWARE.
+ *******************************************************************/
+ 
+ 
++#define PY_SSIZE_T_CLEAN
++
+ /* _ScanDevice objects */
+ 
+ #include "Python.h"
diff --git a/srcpkgs/hplip/patches/sane.patch b/srcpkgs/hplip/patches/sane.patch
deleted file mode 100644
index d3579638ee97..000000000000
--- a/srcpkgs/hplip/patches/sane.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/scan/sane.py	2020-10-13 22:29:59.456276307 -0400
-+++ b/scan/sane.py	2020-10-13 22:32:44.663586789 -0400
-@@ -378,14 +378,14 @@
- 
-     def isScanActive(self):
-         if self.scan_thread is not None:
--            return self.scan_thread.isAlive() and self.scan_thread.scan_active
-+            return self.scan_thread.is_alive() and self.scan_thread.scan_active
-         else:
-             return False
- 
- 
-     def waitForScanDone(self):
-         if self.scan_thread is not None and \
--            self.scan_thread.isAlive() and \
-+            self.scan_thread.is_alive() and \
-             self.scan_thread.scan_active:
- 
-             try:
-@@ -398,9 +398,9 @@
-         #time.sleep(0.5)
-         if self.scan_thread is not None:
-             while True:
--                #print self.scan_thread.isAlive()
-+                #print self.scan_thread.is_alive()
-                 #print self.scan_thread.scan_active
--                if self.scan_thread.isAlive() and \
-+                if self.scan_thread.is_alive() and \
-                     self.scan_thread.scan_active:
-                     return
- 
diff --git a/srcpkgs/hplip/template b/srcpkgs/hplip/template
index c6bc1a9b0df2..cc7b45385422 100644
--- a/srcpkgs/hplip/template
+++ b/srcpkgs/hplip/template
@@ -1,7 +1,7 @@
 # Template file for 'hplip'
 pkgname=hplip
-version=3.20.9
-revision=6
+version=3.21.8
+revision=1
 build_style=gnu-configure
 pycompile_dirs="usr/share/hplip"
 # configure checks sys.version[:3] for Python versioning, so 3.10 becomes 3.1;
@@ -19,6 +19,7 @@ configure_args="
  --enable-hpijs-install
  --enable-foomatic-drv-install
  --enable-pp-build
+ --disable-imageProcessor-build
  --with-mimedir=/usr/share/cups/mime
  am_cv_python_version=${py3_ver}"
 conf_files="/etc/hp/hplip.conf"
@@ -34,7 +35,7 @@ maintainer="Orphaned <orphan@voidlinux.org>"
 license="GPL-2.0-only, BSD-3-Clause, MIT"
 homepage="https://developers.hp.com/hp-linux-imaging-and-printing"
 distfiles="${SOURCEFORGE_SITE}/hplip/hplip/${version}/hplip-${version}.tar.gz"
-checksum=36251189aa9cc349f6a3eacbb7ac3c4fd26fc9f087c9f75cee051010c85d2ddf
+checksum=f13e5295c1f0c2894f742bad44b2f40c80dbf8df010263d809081bc4df97ce1c
 conflicts="hplip-gui"
 
 CFLAGS="-I${XBPS_CROSS_BASE}/usr/include/libusb-1.0 -I${XBPS_CROSS_BASE}/${py3_inc}"

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.8
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
@ 2021-10-31  8:40 ` biopsin
  2021-11-04 13:38 ` biopsin
                   ` (12 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-10-31  8:40 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 165 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-955659658

Comment:
closes #33700
Thank you

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.8
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
  2021-10-31  8:40 ` biopsin
@ 2021-11-04 13:38 ` biopsin
  2021-11-05 10:26 ` biopsin
                   ` (11 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-11-04 13:38 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 574 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-960949018

Comment:
Managed to test PR and unfortunate it breaks xsane (scanner) with
```
Failed to open device hpaio:/net/HP_Neverstop_Laser_MPF_120x?ip=192.168.1.201
Error during device I/O
```
but
```
  ~ $ hp-probe -bcups
HP Linux Imaging and Printing System (ver. 3.21.8)
Printer Discovery Utility ver. 4.1

hp:/net/HP_Neverstop_Laser_MFP_120x?ip=192.168.1.201  
HP_Neverstop_Laser_MFP_120x

Found 1 printer(s) on the 'cups' bus.
```

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.8
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
  2021-10-31  8:40 ` biopsin
  2021-11-04 13:38 ` biopsin
@ 2021-11-05 10:26 ` biopsin
  2021-11-05 17:55 ` heindsight
                   ` (10 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-11-05 10:26 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 318 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-961781050

Comment:
Please add
changelog="https://developers.hp.com/hp-linux-imaging-and-printing/release_notes"
and bump to version 3.21.10

I will test further issue with xsane this weekend..

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.8
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (2 preceding siblings ...)
  2021-11-05 10:26 ` biopsin
@ 2021-11-05 17:55 ` heindsight
  2021-11-05 18:43 ` [PR PATCH] [Updated] " heindsight
                   ` (9 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: heindsight @ 2021-11-05 17:55 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 509 bytes --]

New comment by heindsight on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-962099473

Comment:
@biopsin thanks for testing. Not sure why xsane isn't working for you, it does work for me on my Deskjet 3630. One notable difference is that mine uses the LEDM backend and as far as I can tell the Neverstop MFP 120x models use ESCL, so I suppose it's possible there's been a regression for ESCL scanners.

I'll add the changelog and bump to 3.21.10 as requested.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PR PATCH] [Updated] hplip: Update to 3.21.8
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (3 preceding siblings ...)
  2021-11-05 17:55 ` heindsight
@ 2021-11-05 18:43 ` heindsight
  2021-11-05 20:16 ` [PR PATCH] [Updated] hplip: Update to 3.21.10 heindsight
                   ` (8 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: heindsight @ 2021-11-05 18:43 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1681 bytes --]

There is an updated pull request by heindsight against master on the void-packages repository

https://github.com/heindsight/void-packages hplip
https://github.com/void-linux/void-packages/pull/33832

hplip: Update to 3.21.8
Update hplip to latest upstream version and patch to fix Python 3.10 compatibility.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33832.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hplip-33832.patch --]
[-- Type: text/x-diff, Size: 15516 bytes --]

From 7496a3024194289cca0b5c9df9c1c6be86708c02 Mon Sep 17 00:00:00 2001
From: Heinrich Kruger <heindsight@kruger.dev>
Date: Wed, 20 Oct 2021 09:18:02 +0100
Subject: [PATCH] hplip: Update to 3.21.10

Update hplip to latest upstream version and patch to fix Python 3.10
compatibility.
---
 ...Processor-functionality-which-is-clo.patch | 113 ------------------
 srcpkgs/hplip/patches/gzip_text.patch         |  13 ++
 srcpkgs/hplip/patches/pysizet_clean.patch     | 100 ++++++++++++++++
 .../remove-imageprocessing-install.patch      |  37 ++++++
 srcpkgs/hplip/patches/sane.patch              |  31 -----
 srcpkgs/hplip/template                        |   8 +-
 6 files changed, 155 insertions(+), 147 deletions(-)
 delete mode 100644 srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
 create mode 100644 srcpkgs/hplip/patches/gzip_text.patch
 create mode 100644 srcpkgs/hplip/patches/pysizet_clean.patch
 create mode 100644 srcpkgs/hplip/patches/remove-imageprocessing-install.patch
 delete mode 100644 srcpkgs/hplip/patches/sane.patch

diff --git a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch b/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
deleted file mode 100644
index 8d3b4d7bfda2..000000000000
--- a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From fa9c0cf1a5db9bf8880b4796d5e3e0da46534e3d Mon Sep 17 00:00:00 2001
-From: Didier Raboud <odyx@debian.org>
-Date: Tue, 21 Aug 2018 18:18:10 +0200
-Subject: Remove all ImageProcessor functionality, which is closed-source
-
----
- Makefile.am                  | 14 ++------------
- prnt/hpcups/HPCupsFilter.cpp | 21 ---------------------
- 2 files changed, 2 insertions(+), 33 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index 1b097c4f9..8d5d78c9f 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -166,7 +166,7 @@ if !HPLIP_CLASS_DRIVER
- dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
- endif #HPLIP_CLASS_DRIVER
- 
--dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
-+dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
- dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
- 
- if !HPLIP_CLASS_DRIVER
-@@ -594,7 +594,7 @@ hpcups_SOURCES = prnt/hpcups/HPCupsFilter.cpp prnt/hpcups/HPCupsFilter.h prnt/hp
- 	prnt/hpcups/ImageProcessor.h
- 
- hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
--hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
-+hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
- #else
- #hpcupsdir = $(cupsfilterdir)
- #hpcups_PROGRAMS = hpcups
-@@ -686,16 +686,6 @@ endif #HPLIP_CLASS_DRIVER
- 
- install-data-hook:
- if HPLIP_BUILD
--	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
--	fi; \
--	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
--	fi
- if !HPLIP_CLASS_DRIVER
- #	   If scanner build, add hpaio entry to sane dll.conf.
- 	if [ "$(scan_build)" = "yes" ]; then \
-diff --git a/prnt/hpcups/HPCupsFilter.cpp b/prnt/hpcups/HPCupsFilter.cpp
-index 5b282d83f..0bacfafac 100644
---- a/prnt/hpcups/HPCupsFilter.cpp
-+++ b/prnt/hpcups/HPCupsFilter.cpp
-@@ -31,7 +31,6 @@
- \*****************************************************************************/
- 
- #include "HPCupsFilter.h"
--#include "ImageProcessor.h"
- 
- #include <signal.h>
- #include <sys/wait.h>
-@@ -637,16 +636,10 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
- 
- 
-     sprintf(hpPreProcessedRasterFile, "%s/hp_%s_cups_SwapedPagesXXXXXX",CUPS_TMP_DIR, m_JA.user_name);
--    image_processor_t* imageProcessor = imageProcessorCreate();
- 
-     while (cupsRasterReadHeader2(cups_raster, &cups_header))
-     {
- 
--        IMAGE_PROCESSOR_ERROR result = imageProcessorStartPage(imageProcessor, &cups_header);
--        if (result != IPE_SUCCESS){
--            dbglog("DEBUG: imageProcessorStartPage failed result = %d\n", result);
--        }
--
-         current_page_number++;
- 
-         if (current_page_number == 1) {
-@@ -745,12 +738,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             color_raster = rgbRaster;
-             black_raster = kRaster;
- 
--            result = imageProcessorProcessLine(imageProcessor, m_pPrinterBuffer, cups_header.cupsBytesPerLine);
--            if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorProcessLine failed result = %d\n", result);
--            }
--
--
-             if ((y == 0) && !is_ljmono) {
-                 //For ljmono, make sure that first line is not a blankRaster line.Otherwise printer
-                 //may not skip blank lines before actual data
-@@ -780,12 +767,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             }
-         }  // for() loop end
- 
--        result = imageProcessorEndPage(imageProcessor);
--        if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorEndPage failed result = %d\n", result);
--        }
--
--
-         m_Job.NewPage();
-         if (err != NO_ERROR) {
-             break;
-@@ -800,8 +781,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-         rgbRaster = NULL;
-     }
- 
--    imageProcessorDestroy(imageProcessor);
--
-     unlink(hpPreProcessedRasterFile);
-     return ret_status;
- }
diff --git a/srcpkgs/hplip/patches/gzip_text.patch b/srcpkgs/hplip/patches/gzip_text.patch
new file mode 100644
index 000000000000..8309415a2a7a
--- /dev/null
+++ b/srcpkgs/hplip/patches/gzip_text.patch
@@ -0,0 +1,13 @@
+Open gzipped PPD file in text mode, otherwise text regex search fails
+
+--- a/setup.py	2021-10-18 18:37:49.795887272 +0100
++++ b/setup.py	2021-10-18 18:37:20.214898473 +0100
+@@ -552,7 +552,7 @@
+                         if os.path.exists(file_path) and os.path.isfile(file_path):
+ 
+                             if file_path.endswith('.gz'):
+-                                nickname = gzip.GzipFile(file_path, 'r').read(4096)
++                                nickname = gzip.open(file_path, 'rt').read(4096)
+                             else:
+                                 nickname = open(file_path, 'r').read(4096)
+ 
diff --git a/srcpkgs/hplip/patches/pysizet_clean.patch b/srcpkgs/hplip/patches/pysizet_clean.patch
new file mode 100644
index 000000000000..38d21f520934
--- /dev/null
+++ b/srcpkgs/hplip/patches/pysizet_clean.patch
@@ -0,0 +1,100 @@
+Based on patch by Zdenek Dohnal obtained from
+https://bugs.launchpad.net/hplip/+bug/1933973
+
+diff -pru hplip-3.21.8/io/mudext/hpmudext.c hplip-3.21.8-patched/io/mudext/hpmudext.c
+--- hplip-3.21.8/io/mudext/hpmudext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/io/mudext/hpmudext.c	2021-10-22 08:30:38.600922861 +0100
+@@ -24,6 +24,8 @@ Authors: Don Welch, David Suffield, Naga
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <stdarg.h>
+ #include "hpmud.h"
+@@ -187,14 +189,22 @@ static PyObject *write_channel(PyObject
+     HPMUD_CHANNEL cd;
+     int timeout = 30;
+     char * buf;
+-    int buf_size = 0;
++    Py_ssize_t buf_size = 0;
++    int buf_size_asInt = 0;
+     int bytes_written = 0;
+ 
+     if (!PyArg_ParseTuple(args, "iis#|i", &dd, &cd, &buf, &buf_size, &timeout))
+         return NULL;
+ 
++    if (buf_size < INT_MIN)
++      buf_size_asInt = INT_MIN;
++    else if (buf_size > INT_MAX)
++      buf_size_asInt = INT_MAX;
++    else
++      buf_size_asInt = (int)buf_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_write_channel(dd, cd, buf, buf_size,  timeout, &bytes_written);
++    result = hpmud_write_channel(dd, cd, buf, buf_size_asInt,  timeout, &bytes_written);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, bytes_written);
+@@ -231,14 +241,22 @@ static PyObject *set_pml(PyObject *self,
+     char * oid;
+     int type;
+     char * data;
+-    int data_size;
++    Py_ssize_t data_size = 0;
++    int data_size_asInt = 0;
+     int pml_result;
+ 
+     if (!PyArg_ParseTuple(args, "iisis#", &dd, &cd, &oid, &type, &data, &data_size))
+         return NULL;
+ 
++    if (data_size < INT_MIN)
++      data_size_asInt = INT_MIN;
++    else if (data_size > INT_MAX)
++      data_size_asInt = INT_MAX;
++    else
++      data_size_asInt = (int)data_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size, &pml_result);
++    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size_asInt, &pml_result);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, pml_result);
+diff -pru hplip-3.21.8/pcard/pcardext/pcardext.c hplip-3.21.8-patched/pcard/pcardext/pcardext.c
+--- hplip-3.21.8/pcard/pcardext/pcardext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/pcard/pcardext/pcardext.c	2021-10-22 08:24:11.010798381 +0100
+@@ -24,6 +24,8 @@ Author: Don Welch
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <structmember.h>
+ #include "../fat.h"
+diff -pru hplip-3.21.8/prnt/cupsext/cupsext.c hplip-3.21.8-patched/prnt/cupsext/cupsext.c
+--- hplip-3.21.8/prnt/cupsext/cupsext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/prnt/cupsext/cupsext.c	2021-10-22 08:26:30.975843330 +0100
+@@ -73,6 +73,7 @@ Yashwant Kumar Sahu
+ Sanjay Kumar
+ */
+ 
++#define PY_SSIZE_T_CLEAN
+ 
+ #include <Python.h>
+ #include <structmember.h>
+diff -pru hplip-3.21.8/scan/scanext/scanext.c hplip-3.21.8-patched/scan/scanext/scanext.c
+--- hplip-3.21.8/scan/scanext/scanext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/scan/scanext/scanext.c	2021-10-21 21:31:23.074739743 +0100
+@@ -45,6 +45,8 @@ PERFORMANCE OF THIS SOFTWARE.
+ *******************************************************************/
+ 
+ 
++#define PY_SSIZE_T_CLEAN
++
+ /* _ScanDevice objects */
+ 
+ #include "Python.h"
diff --git a/srcpkgs/hplip/patches/remove-imageprocessing-install.patch b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
new file mode 100644
index 000000000000..de0efe17fbda
--- /dev/null
+++ b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
@@ -0,0 +1,37 @@
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -167,7 +167,7 @@
+ dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
+ endif #HPLIP_CLASS_DRIVER
+ 
+-dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
++dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
+ 
+ dist_noinst_DATA += prnt/ipp-usb/HPLIP.conf
+ dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
+@@ -597,7 +597,7 @@
+ 	prnt/hpcups/ImageProcessor.h
+ 
+ hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
+-hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
++hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
+ #else
+ #hpcupsdir = $(cupsfilterdir)
+ #hpcups_PROGRAMS = hpcups
+@@ -687,16 +687,6 @@
+ 
+ install-data-hook:
+ if HPLIP_BUILD
+-	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
+-	fi; \
+-	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
+-	fi
+ 	if [ -d "/usr/share/ipp-usb/quirks/" ]; then \
+ 		echo "ipp-usb directory exists"; \
+ 		cp prnt/ipp-usb/HPLIP.conf /usr/share/ipp-usb/quirks/ ; \
diff --git a/srcpkgs/hplip/patches/sane.patch b/srcpkgs/hplip/patches/sane.patch
deleted file mode 100644
index d3579638ee97..000000000000
--- a/srcpkgs/hplip/patches/sane.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/scan/sane.py	2020-10-13 22:29:59.456276307 -0400
-+++ b/scan/sane.py	2020-10-13 22:32:44.663586789 -0400
-@@ -378,14 +378,14 @@
- 
-     def isScanActive(self):
-         if self.scan_thread is not None:
--            return self.scan_thread.isAlive() and self.scan_thread.scan_active
-+            return self.scan_thread.is_alive() and self.scan_thread.scan_active
-         else:
-             return False
- 
- 
-     def waitForScanDone(self):
-         if self.scan_thread is not None and \
--            self.scan_thread.isAlive() and \
-+            self.scan_thread.is_alive() and \
-             self.scan_thread.scan_active:
- 
-             try:
-@@ -398,9 +398,9 @@
-         #time.sleep(0.5)
-         if self.scan_thread is not None:
-             while True:
--                #print self.scan_thread.isAlive()
-+                #print self.scan_thread.is_alive()
-                 #print self.scan_thread.scan_active
--                if self.scan_thread.isAlive() and \
-+                if self.scan_thread.is_alive() and \
-                     self.scan_thread.scan_active:
-                     return
- 
diff --git a/srcpkgs/hplip/template b/srcpkgs/hplip/template
index c6bc1a9b0df2..339d08b463d8 100644
--- a/srcpkgs/hplip/template
+++ b/srcpkgs/hplip/template
@@ -1,7 +1,7 @@
 # Template file for 'hplip'
 pkgname=hplip
-version=3.20.9
-revision=6
+version=3.21.10
+revision=1
 build_style=gnu-configure
 pycompile_dirs="usr/share/hplip"
 # configure checks sys.version[:3] for Python versioning, so 3.10 becomes 3.1;
@@ -19,6 +19,7 @@ configure_args="
  --enable-hpijs-install
  --enable-foomatic-drv-install
  --enable-pp-build
+ --disable-imageProcessor-build
  --with-mimedir=/usr/share/cups/mime
  am_cv_python_version=${py3_ver}"
 conf_files="/etc/hp/hplip.conf"
@@ -33,8 +34,9 @@ short_desc="HP Linux Imaging and Printing"
 maintainer="Orphaned <orphan@voidlinux.org>"
 license="GPL-2.0-only, BSD-3-Clause, MIT"
 homepage="https://developers.hp.com/hp-linux-imaging-and-printing"
+changelog="https://developers.hp.com/hp-linux-imaging-and-printing/release_notes"
 distfiles="${SOURCEFORGE_SITE}/hplip/hplip/${version}/hplip-${version}.tar.gz"
-checksum=36251189aa9cc349f6a3eacbb7ac3c4fd26fc9f087c9f75cee051010c85d2ddf
+checksum=de230e1fdd1e718fc718417265612e0c882949e08fe045ee56f9f9882e6b6a60
 conflicts="hplip-gui"
 
 CFLAGS="-I${XBPS_CROSS_BASE}/usr/include/libusb-1.0 -I${XBPS_CROSS_BASE}/${py3_inc}"

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PR PATCH] [Updated] hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (4 preceding siblings ...)
  2021-11-05 18:43 ` [PR PATCH] [Updated] " heindsight
@ 2021-11-05 20:16 ` heindsight
  2021-11-09 13:20 ` biopsin
                   ` (7 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: heindsight @ 2021-11-05 20:16 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1682 bytes --]

There is an updated pull request by heindsight against master on the void-packages repository

https://github.com/heindsight/void-packages hplip
https://github.com/void-linux/void-packages/pull/33832

hplip: Update to 3.21.10
Update hplip to latest upstream version and patch to fix Python 3.10 compatibility.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33832.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hplip-33832.patch --]
[-- Type: text/x-diff, Size: 15516 bytes --]

From 2f8ecb5bd3b56b18b127a55db0f13990392240a5 Mon Sep 17 00:00:00 2001
From: Heinrich Kruger <heindsight@kruger.dev>
Date: Wed, 20 Oct 2021 09:18:02 +0100
Subject: [PATCH] hplip: Update to 3.21.10

Update hplip to latest upstream version and patch to fix Python 3.10
compatibility.
---
 ...Processor-functionality-which-is-clo.patch | 113 ------------------
 srcpkgs/hplip/patches/gzip_text.patch         |  13 ++
 srcpkgs/hplip/patches/pysizet_clean.patch     | 100 ++++++++++++++++
 .../remove-imageprocessing-install.patch      |  37 ++++++
 srcpkgs/hplip/patches/sane.patch              |  31 -----
 srcpkgs/hplip/template                        |   8 +-
 6 files changed, 155 insertions(+), 147 deletions(-)
 delete mode 100644 srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
 create mode 100644 srcpkgs/hplip/patches/gzip_text.patch
 create mode 100644 srcpkgs/hplip/patches/pysizet_clean.patch
 create mode 100644 srcpkgs/hplip/patches/remove-imageprocessing-install.patch
 delete mode 100644 srcpkgs/hplip/patches/sane.patch

diff --git a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch b/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
deleted file mode 100644
index 8d3b4d7bfda2..000000000000
--- a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From fa9c0cf1a5db9bf8880b4796d5e3e0da46534e3d Mon Sep 17 00:00:00 2001
-From: Didier Raboud <odyx@debian.org>
-Date: Tue, 21 Aug 2018 18:18:10 +0200
-Subject: Remove all ImageProcessor functionality, which is closed-source
-
----
- Makefile.am                  | 14 ++------------
- prnt/hpcups/HPCupsFilter.cpp | 21 ---------------------
- 2 files changed, 2 insertions(+), 33 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index 1b097c4f9..8d5d78c9f 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -166,7 +166,7 @@ if !HPLIP_CLASS_DRIVER
- dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
- endif #HPLIP_CLASS_DRIVER
- 
--dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
-+dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
- dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
- 
- if !HPLIP_CLASS_DRIVER
-@@ -594,7 +594,7 @@ hpcups_SOURCES = prnt/hpcups/HPCupsFilter.cpp prnt/hpcups/HPCupsFilter.h prnt/hp
- 	prnt/hpcups/ImageProcessor.h
- 
- hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
--hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
-+hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
- #else
- #hpcupsdir = $(cupsfilterdir)
- #hpcups_PROGRAMS = hpcups
-@@ -686,16 +686,6 @@ endif #HPLIP_CLASS_DRIVER
- 
- install-data-hook:
- if HPLIP_BUILD
--	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
--	fi; \
--	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
--	fi
- if !HPLIP_CLASS_DRIVER
- #	   If scanner build, add hpaio entry to sane dll.conf.
- 	if [ "$(scan_build)" = "yes" ]; then \
-diff --git a/prnt/hpcups/HPCupsFilter.cpp b/prnt/hpcups/HPCupsFilter.cpp
-index 5b282d83f..0bacfafac 100644
---- a/prnt/hpcups/HPCupsFilter.cpp
-+++ b/prnt/hpcups/HPCupsFilter.cpp
-@@ -31,7 +31,6 @@
- \*****************************************************************************/
- 
- #include "HPCupsFilter.h"
--#include "ImageProcessor.h"
- 
- #include <signal.h>
- #include <sys/wait.h>
-@@ -637,16 +636,10 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
- 
- 
-     sprintf(hpPreProcessedRasterFile, "%s/hp_%s_cups_SwapedPagesXXXXXX",CUPS_TMP_DIR, m_JA.user_name);
--    image_processor_t* imageProcessor = imageProcessorCreate();
- 
-     while (cupsRasterReadHeader2(cups_raster, &cups_header))
-     {
- 
--        IMAGE_PROCESSOR_ERROR result = imageProcessorStartPage(imageProcessor, &cups_header);
--        if (result != IPE_SUCCESS){
--            dbglog("DEBUG: imageProcessorStartPage failed result = %d\n", result);
--        }
--
-         current_page_number++;
- 
-         if (current_page_number == 1) {
-@@ -745,12 +738,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             color_raster = rgbRaster;
-             black_raster = kRaster;
- 
--            result = imageProcessorProcessLine(imageProcessor, m_pPrinterBuffer, cups_header.cupsBytesPerLine);
--            if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorProcessLine failed result = %d\n", result);
--            }
--
--
-             if ((y == 0) && !is_ljmono) {
-                 //For ljmono, make sure that first line is not a blankRaster line.Otherwise printer
-                 //may not skip blank lines before actual data
-@@ -780,12 +767,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             }
-         }  // for() loop end
- 
--        result = imageProcessorEndPage(imageProcessor);
--        if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorEndPage failed result = %d\n", result);
--        }
--
--
-         m_Job.NewPage();
-         if (err != NO_ERROR) {
-             break;
-@@ -800,8 +781,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-         rgbRaster = NULL;
-     }
- 
--    imageProcessorDestroy(imageProcessor);
--
-     unlink(hpPreProcessedRasterFile);
-     return ret_status;
- }
diff --git a/srcpkgs/hplip/patches/gzip_text.patch b/srcpkgs/hplip/patches/gzip_text.patch
new file mode 100644
index 000000000000..8309415a2a7a
--- /dev/null
+++ b/srcpkgs/hplip/patches/gzip_text.patch
@@ -0,0 +1,13 @@
+Open gzipped PPD file in text mode, otherwise text regex search fails
+
+--- a/setup.py	2021-10-18 18:37:49.795887272 +0100
++++ b/setup.py	2021-10-18 18:37:20.214898473 +0100
+@@ -552,7 +552,7 @@
+                         if os.path.exists(file_path) and os.path.isfile(file_path):
+ 
+                             if file_path.endswith('.gz'):
+-                                nickname = gzip.GzipFile(file_path, 'r').read(4096)
++                                nickname = gzip.open(file_path, 'rt').read(4096)
+                             else:
+                                 nickname = open(file_path, 'r').read(4096)
+ 
diff --git a/srcpkgs/hplip/patches/pysizet_clean.patch b/srcpkgs/hplip/patches/pysizet_clean.patch
new file mode 100644
index 000000000000..38d21f520934
--- /dev/null
+++ b/srcpkgs/hplip/patches/pysizet_clean.patch
@@ -0,0 +1,100 @@
+Based on patch by Zdenek Dohnal obtained from
+https://bugs.launchpad.net/hplip/+bug/1933973
+
+diff -pru hplip-3.21.8/io/mudext/hpmudext.c hplip-3.21.8-patched/io/mudext/hpmudext.c
+--- hplip-3.21.8/io/mudext/hpmudext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/io/mudext/hpmudext.c	2021-10-22 08:30:38.600922861 +0100
+@@ -24,6 +24,8 @@ Authors: Don Welch, David Suffield, Naga
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <stdarg.h>
+ #include "hpmud.h"
+@@ -187,14 +189,22 @@ static PyObject *write_channel(PyObject
+     HPMUD_CHANNEL cd;
+     int timeout = 30;
+     char * buf;
+-    int buf_size = 0;
++    Py_ssize_t buf_size = 0;
++    int buf_size_asInt = 0;
+     int bytes_written = 0;
+ 
+     if (!PyArg_ParseTuple(args, "iis#|i", &dd, &cd, &buf, &buf_size, &timeout))
+         return NULL;
+ 
++    if (buf_size < INT_MIN)
++      buf_size_asInt = INT_MIN;
++    else if (buf_size > INT_MAX)
++      buf_size_asInt = INT_MAX;
++    else
++      buf_size_asInt = (int)buf_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_write_channel(dd, cd, buf, buf_size,  timeout, &bytes_written);
++    result = hpmud_write_channel(dd, cd, buf, buf_size_asInt,  timeout, &bytes_written);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, bytes_written);
+@@ -231,14 +241,22 @@ static PyObject *set_pml(PyObject *self,
+     char * oid;
+     int type;
+     char * data;
+-    int data_size;
++    Py_ssize_t data_size = 0;
++    int data_size_asInt = 0;
+     int pml_result;
+ 
+     if (!PyArg_ParseTuple(args, "iisis#", &dd, &cd, &oid, &type, &data, &data_size))
+         return NULL;
+ 
++    if (data_size < INT_MIN)
++      data_size_asInt = INT_MIN;
++    else if (data_size > INT_MAX)
++      data_size_asInt = INT_MAX;
++    else
++      data_size_asInt = (int)data_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size, &pml_result);
++    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size_asInt, &pml_result);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, pml_result);
+diff -pru hplip-3.21.8/pcard/pcardext/pcardext.c hplip-3.21.8-patched/pcard/pcardext/pcardext.c
+--- hplip-3.21.8/pcard/pcardext/pcardext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/pcard/pcardext/pcardext.c	2021-10-22 08:24:11.010798381 +0100
+@@ -24,6 +24,8 @@ Author: Don Welch
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <structmember.h>
+ #include "../fat.h"
+diff -pru hplip-3.21.8/prnt/cupsext/cupsext.c hplip-3.21.8-patched/prnt/cupsext/cupsext.c
+--- hplip-3.21.8/prnt/cupsext/cupsext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/prnt/cupsext/cupsext.c	2021-10-22 08:26:30.975843330 +0100
+@@ -73,6 +73,7 @@ Yashwant Kumar Sahu
+ Sanjay Kumar
+ */
+ 
++#define PY_SSIZE_T_CLEAN
+ 
+ #include <Python.h>
+ #include <structmember.h>
+diff -pru hplip-3.21.8/scan/scanext/scanext.c hplip-3.21.8-patched/scan/scanext/scanext.c
+--- hplip-3.21.8/scan/scanext/scanext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/scan/scanext/scanext.c	2021-10-21 21:31:23.074739743 +0100
+@@ -45,6 +45,8 @@ PERFORMANCE OF THIS SOFTWARE.
+ *******************************************************************/
+ 
+ 
++#define PY_SSIZE_T_CLEAN
++
+ /* _ScanDevice objects */
+ 
+ #include "Python.h"
diff --git a/srcpkgs/hplip/patches/remove-imageprocessing-install.patch b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
new file mode 100644
index 000000000000..de0efe17fbda
--- /dev/null
+++ b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
@@ -0,0 +1,37 @@
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -167,7 +167,7 @@
+ dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
+ endif #HPLIP_CLASS_DRIVER
+ 
+-dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
++dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
+ 
+ dist_noinst_DATA += prnt/ipp-usb/HPLIP.conf
+ dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
+@@ -597,7 +597,7 @@
+ 	prnt/hpcups/ImageProcessor.h
+ 
+ hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
+-hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
++hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
+ #else
+ #hpcupsdir = $(cupsfilterdir)
+ #hpcups_PROGRAMS = hpcups
+@@ -687,16 +687,6 @@
+ 
+ install-data-hook:
+ if HPLIP_BUILD
+-	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
+-	fi; \
+-	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
+-	fi
+ 	if [ -d "/usr/share/ipp-usb/quirks/" ]; then \
+ 		echo "ipp-usb directory exists"; \
+ 		cp prnt/ipp-usb/HPLIP.conf /usr/share/ipp-usb/quirks/ ; \
diff --git a/srcpkgs/hplip/patches/sane.patch b/srcpkgs/hplip/patches/sane.patch
deleted file mode 100644
index d3579638ee97..000000000000
--- a/srcpkgs/hplip/patches/sane.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/scan/sane.py	2020-10-13 22:29:59.456276307 -0400
-+++ b/scan/sane.py	2020-10-13 22:32:44.663586789 -0400
-@@ -378,14 +378,14 @@
- 
-     def isScanActive(self):
-         if self.scan_thread is not None:
--            return self.scan_thread.isAlive() and self.scan_thread.scan_active
-+            return self.scan_thread.is_alive() and self.scan_thread.scan_active
-         else:
-             return False
- 
- 
-     def waitForScanDone(self):
-         if self.scan_thread is not None and \
--            self.scan_thread.isAlive() and \
-+            self.scan_thread.is_alive() and \
-             self.scan_thread.scan_active:
- 
-             try:
-@@ -398,9 +398,9 @@
-         #time.sleep(0.5)
-         if self.scan_thread is not None:
-             while True:
--                #print self.scan_thread.isAlive()
-+                #print self.scan_thread.is_alive()
-                 #print self.scan_thread.scan_active
--                if self.scan_thread.isAlive() and \
-+                if self.scan_thread.is_alive() and \
-                     self.scan_thread.scan_active:
-                     return
- 
diff --git a/srcpkgs/hplip/template b/srcpkgs/hplip/template
index c6bc1a9b0df2..339d08b463d8 100644
--- a/srcpkgs/hplip/template
+++ b/srcpkgs/hplip/template
@@ -1,7 +1,7 @@
 # Template file for 'hplip'
 pkgname=hplip
-version=3.20.9
-revision=6
+version=3.21.10
+revision=1
 build_style=gnu-configure
 pycompile_dirs="usr/share/hplip"
 # configure checks sys.version[:3] for Python versioning, so 3.10 becomes 3.1;
@@ -19,6 +19,7 @@ configure_args="
  --enable-hpijs-install
  --enable-foomatic-drv-install
  --enable-pp-build
+ --disable-imageProcessor-build
  --with-mimedir=/usr/share/cups/mime
  am_cv_python_version=${py3_ver}"
 conf_files="/etc/hp/hplip.conf"
@@ -33,8 +34,9 @@ short_desc="HP Linux Imaging and Printing"
 maintainer="Orphaned <orphan@voidlinux.org>"
 license="GPL-2.0-only, BSD-3-Clause, MIT"
 homepage="https://developers.hp.com/hp-linux-imaging-and-printing"
+changelog="https://developers.hp.com/hp-linux-imaging-and-printing/release_notes"
 distfiles="${SOURCEFORGE_SITE}/hplip/hplip/${version}/hplip-${version}.tar.gz"
-checksum=36251189aa9cc349f6a3eacbb7ac3c4fd26fc9f087c9f75cee051010c85d2ddf
+checksum=de230e1fdd1e718fc718417265612e0c882949e08fe045ee56f9f9882e6b6a60
 conflicts="hplip-gui"
 
 CFLAGS="-I${XBPS_CROSS_BASE}/usr/include/libusb-1.0 -I${XBPS_CROSS_BASE}/${py3_inc}"

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (5 preceding siblings ...)
  2021-11-05 20:16 ` [PR PATCH] [Updated] hplip: Update to 3.21.10 heindsight
@ 2021-11-09 13:20 ` biopsin
  2021-11-09 19:30 ` heindsight
                   ` (6 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-11-09 13:20 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 409 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-964145208

Comment:
@heindsight nope Im at loss; cant manage to resolve this, I've compaird hp-scan debug logs between 3.20.9 and 3.21.10, further tested hp-doctor -i outputs, there is just no significant diff between versions.
I will update this comment as I forgot to attach the logs..

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (6 preceding siblings ...)
  2021-11-09 13:20 ` biopsin
@ 2021-11-09 19:30 ` heindsight
  2021-11-23 10:01 ` biopsin
                   ` (5 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: heindsight @ 2021-11-09 19:30 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 478 bytes --]

New comment by heindsight on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-964467812

Comment:
@biopsin That's rather strange. Could you rebuild with ` -UNDEBUG -DHPMUD_DEBUG -DESCL_DEBUG` added to the `CFLAGS` set in the template?

Then run:
```
scanimage -T -d hpaio:/net/HP_Neverstop_Laser_MFP_120x?ip=192.168.1.201 --verbose
```
while tailing syslog? That might give some more insight into where things are going wrong.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (7 preceding siblings ...)
  2021-11-09 19:30 ` heindsight
@ 2021-11-23 10:01 ` biopsin
  2021-11-28 11:46 ` [PR PATCH] [Updated] " heindsight
                   ` (4 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-11-23 10:01 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 204 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-976356491

Comment:
@heindsight sorry for the delay, I'll see how far I get today..

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PR PATCH] [Updated] hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (8 preceding siblings ...)
  2021-11-23 10:01 ` biopsin
@ 2021-11-28 11:46 ` heindsight
  2021-12-06 21:42 ` ahesford
                   ` (3 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: heindsight @ 2021-11-28 11:46 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1682 bytes --]

There is an updated pull request by heindsight against master on the void-packages repository

https://github.com/heindsight/void-packages hplip
https://github.com/void-linux/void-packages/pull/33832

hplip: Update to 3.21.10
Update hplip to latest upstream version and patch to fix Python 3.10 compatibility.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33832.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hplip-33832.patch --]
[-- Type: text/x-diff, Size: 15516 bytes --]

From 7e7abf6ea24e034dfc7a27e4c5d3bd2991f2d859 Mon Sep 17 00:00:00 2001
From: Heinrich Kruger <heindsight@kruger.dev>
Date: Wed, 20 Oct 2021 09:18:02 +0100
Subject: [PATCH] hplip: Update to 3.21.10

Update hplip to latest upstream version and patch to fix Python 3.10
compatibility.
---
 ...Processor-functionality-which-is-clo.patch | 113 ------------------
 srcpkgs/hplip/patches/gzip_text.patch         |  13 ++
 srcpkgs/hplip/patches/pysizet_clean.patch     | 100 ++++++++++++++++
 .../remove-imageprocessing-install.patch      |  37 ++++++
 srcpkgs/hplip/patches/sane.patch              |  31 -----
 srcpkgs/hplip/template                        |   8 +-
 6 files changed, 155 insertions(+), 147 deletions(-)
 delete mode 100644 srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
 create mode 100644 srcpkgs/hplip/patches/gzip_text.patch
 create mode 100644 srcpkgs/hplip/patches/pysizet_clean.patch
 create mode 100644 srcpkgs/hplip/patches/remove-imageprocessing-install.patch
 delete mode 100644 srcpkgs/hplip/patches/sane.patch

diff --git a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch b/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
deleted file mode 100644
index 8d3b4d7bfda2..000000000000
--- a/srcpkgs/hplip/patches/0025-Remove-all-ImageProcessor-functionality-which-is-clo.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From fa9c0cf1a5db9bf8880b4796d5e3e0da46534e3d Mon Sep 17 00:00:00 2001
-From: Didier Raboud <odyx@debian.org>
-Date: Tue, 21 Aug 2018 18:18:10 +0200
-Subject: Remove all ImageProcessor functionality, which is closed-source
-
----
- Makefile.am                  | 14 ++------------
- prnt/hpcups/HPCupsFilter.cpp | 21 ---------------------
- 2 files changed, 2 insertions(+), 33 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index 1b097c4f9..8d5d78c9f 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -166,7 +166,7 @@ if !HPLIP_CLASS_DRIVER
- dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
- endif #HPLIP_CLASS_DRIVER
- 
--dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
-+dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
- dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
- 
- if !HPLIP_CLASS_DRIVER
-@@ -594,7 +594,7 @@ hpcups_SOURCES = prnt/hpcups/HPCupsFilter.cpp prnt/hpcups/HPCupsFilter.h prnt/hp
- 	prnt/hpcups/ImageProcessor.h
- 
- hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
--hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
-+hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
- #else
- #hpcupsdir = $(cupsfilterdir)
- #hpcups_PROGRAMS = hpcups
-@@ -686,16 +686,6 @@ endif #HPLIP_CLASS_DRIVER
- 
- install-data-hook:
- if HPLIP_BUILD
--	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
--	fi; \
--	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
--		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
--		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
--		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
--	fi
- if !HPLIP_CLASS_DRIVER
- #	   If scanner build, add hpaio entry to sane dll.conf.
- 	if [ "$(scan_build)" = "yes" ]; then \
-diff --git a/prnt/hpcups/HPCupsFilter.cpp b/prnt/hpcups/HPCupsFilter.cpp
-index 5b282d83f..0bacfafac 100644
---- a/prnt/hpcups/HPCupsFilter.cpp
-+++ b/prnt/hpcups/HPCupsFilter.cpp
-@@ -31,7 +31,6 @@
- \*****************************************************************************/
- 
- #include "HPCupsFilter.h"
--#include "ImageProcessor.h"
- 
- #include <signal.h>
- #include <sys/wait.h>
-@@ -637,16 +636,10 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
- 
- 
-     sprintf(hpPreProcessedRasterFile, "%s/hp_%s_cups_SwapedPagesXXXXXX",CUPS_TMP_DIR, m_JA.user_name);
--    image_processor_t* imageProcessor = imageProcessorCreate();
- 
-     while (cupsRasterReadHeader2(cups_raster, &cups_header))
-     {
- 
--        IMAGE_PROCESSOR_ERROR result = imageProcessorStartPage(imageProcessor, &cups_header);
--        if (result != IPE_SUCCESS){
--            dbglog("DEBUG: imageProcessorStartPage failed result = %d\n", result);
--        }
--
-         current_page_number++;
- 
-         if (current_page_number == 1) {
-@@ -745,12 +738,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             color_raster = rgbRaster;
-             black_raster = kRaster;
- 
--            result = imageProcessorProcessLine(imageProcessor, m_pPrinterBuffer, cups_header.cupsBytesPerLine);
--            if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorProcessLine failed result = %d\n", result);
--            }
--
--
-             if ((y == 0) && !is_ljmono) {
-                 //For ljmono, make sure that first line is not a blankRaster line.Otherwise printer
-                 //may not skip blank lines before actual data
-@@ -780,12 +767,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-             }
-         }  // for() loop end
- 
--        result = imageProcessorEndPage(imageProcessor);
--        if (result != IPE_SUCCESS){
--                dbglog("DEBUG: imageProcessorEndPage failed result = %d\n", result);
--        }
--
--
-         m_Job.NewPage();
-         if (err != NO_ERROR) {
-             break;
-@@ -800,8 +781,6 @@ int HPCupsFilter::processRasterData(cups_raster_t *cups_raster)
-         rgbRaster = NULL;
-     }
- 
--    imageProcessorDestroy(imageProcessor);
--
-     unlink(hpPreProcessedRasterFile);
-     return ret_status;
- }
diff --git a/srcpkgs/hplip/patches/gzip_text.patch b/srcpkgs/hplip/patches/gzip_text.patch
new file mode 100644
index 000000000000..8309415a2a7a
--- /dev/null
+++ b/srcpkgs/hplip/patches/gzip_text.patch
@@ -0,0 +1,13 @@
+Open gzipped PPD file in text mode, otherwise text regex search fails
+
+--- a/setup.py	2021-10-18 18:37:49.795887272 +0100
++++ b/setup.py	2021-10-18 18:37:20.214898473 +0100
+@@ -552,7 +552,7 @@
+                         if os.path.exists(file_path) and os.path.isfile(file_path):
+ 
+                             if file_path.endswith('.gz'):
+-                                nickname = gzip.GzipFile(file_path, 'r').read(4096)
++                                nickname = gzip.open(file_path, 'rt').read(4096)
+                             else:
+                                 nickname = open(file_path, 'r').read(4096)
+ 
diff --git a/srcpkgs/hplip/patches/pysizet_clean.patch b/srcpkgs/hplip/patches/pysizet_clean.patch
new file mode 100644
index 000000000000..38d21f520934
--- /dev/null
+++ b/srcpkgs/hplip/patches/pysizet_clean.patch
@@ -0,0 +1,100 @@
+Based on patch by Zdenek Dohnal obtained from
+https://bugs.launchpad.net/hplip/+bug/1933973
+
+diff -pru hplip-3.21.8/io/mudext/hpmudext.c hplip-3.21.8-patched/io/mudext/hpmudext.c
+--- hplip-3.21.8/io/mudext/hpmudext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/io/mudext/hpmudext.c	2021-10-22 08:30:38.600922861 +0100
+@@ -24,6 +24,8 @@ Authors: Don Welch, David Suffield, Naga
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <stdarg.h>
+ #include "hpmud.h"
+@@ -187,14 +189,22 @@ static PyObject *write_channel(PyObject
+     HPMUD_CHANNEL cd;
+     int timeout = 30;
+     char * buf;
+-    int buf_size = 0;
++    Py_ssize_t buf_size = 0;
++    int buf_size_asInt = 0;
+     int bytes_written = 0;
+ 
+     if (!PyArg_ParseTuple(args, "iis#|i", &dd, &cd, &buf, &buf_size, &timeout))
+         return NULL;
+ 
++    if (buf_size < INT_MIN)
++      buf_size_asInt = INT_MIN;
++    else if (buf_size > INT_MAX)
++      buf_size_asInt = INT_MAX;
++    else
++      buf_size_asInt = (int)buf_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_write_channel(dd, cd, buf, buf_size,  timeout, &bytes_written);
++    result = hpmud_write_channel(dd, cd, buf, buf_size_asInt,  timeout, &bytes_written);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, bytes_written);
+@@ -231,14 +241,22 @@ static PyObject *set_pml(PyObject *self,
+     char * oid;
+     int type;
+     char * data;
+-    int data_size;
++    Py_ssize_t data_size = 0;
++    int data_size_asInt = 0;
+     int pml_result;
+ 
+     if (!PyArg_ParseTuple(args, "iisis#", &dd, &cd, &oid, &type, &data, &data_size))
+         return NULL;
+ 
++    if (data_size < INT_MIN)
++      data_size_asInt = INT_MIN;
++    else if (data_size > INT_MAX)
++      data_size_asInt = INT_MAX;
++    else
++      data_size_asInt = (int)data_size;
++
+     Py_BEGIN_ALLOW_THREADS
+-    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size, &pml_result);
++    result = hpmud_set_pml(dd, cd, oid, type, (void *)data, data_size_asInt, &pml_result);
+     Py_END_ALLOW_THREADS
+ 
+     return Py_BuildValue("(ii)", result, pml_result);
+diff -pru hplip-3.21.8/pcard/pcardext/pcardext.c hplip-3.21.8-patched/pcard/pcardext/pcardext.c
+--- hplip-3.21.8/pcard/pcardext/pcardext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/pcard/pcardext/pcardext.c	2021-10-22 08:24:11.010798381 +0100
+@@ -24,6 +24,8 @@ Author: Don Welch
+ 
+ \*****************************************************************************/
+ 
++#define PY_SSIZE_T_CLEAN
++
+ #include <Python.h>
+ #include <structmember.h>
+ #include "../fat.h"
+diff -pru hplip-3.21.8/prnt/cupsext/cupsext.c hplip-3.21.8-patched/prnt/cupsext/cupsext.c
+--- hplip-3.21.8/prnt/cupsext/cupsext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/prnt/cupsext/cupsext.c	2021-10-22 08:26:30.975843330 +0100
+@@ -73,6 +73,7 @@ Yashwant Kumar Sahu
+ Sanjay Kumar
+ */
+ 
++#define PY_SSIZE_T_CLEAN
+ 
+ #include <Python.h>
+ #include <structmember.h>
+diff -pru hplip-3.21.8/scan/scanext/scanext.c hplip-3.21.8-patched/scan/scanext/scanext.c
+--- hplip-3.21.8/scan/scanext/scanext.c	2021-09-01 16:10:17.000000000 +0100
++++ hplip-3.21.8-patched/scan/scanext/scanext.c	2021-10-21 21:31:23.074739743 +0100
+@@ -45,6 +45,8 @@ PERFORMANCE OF THIS SOFTWARE.
+ *******************************************************************/
+ 
+ 
++#define PY_SSIZE_T_CLEAN
++
+ /* _ScanDevice objects */
+ 
+ #include "Python.h"
diff --git a/srcpkgs/hplip/patches/remove-imageprocessing-install.patch b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
new file mode 100644
index 000000000000..de0efe17fbda
--- /dev/null
+++ b/srcpkgs/hplip/patches/remove-imageprocessing-install.patch
@@ -0,0 +1,37 @@
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -167,7 +167,7 @@
+ dist_hplip_SCRIPTS = hpssd.py __init__.py hpdio.py
+ endif #HPLIP_CLASS_DRIVER
+ 
+-dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template prnt/hpcups/libImageProcessor-x86_64.so prnt/hpcups/libImageProcessor-x86_32.so
++dist_noinst_DATA += prnt/drv/hpijs.drv.in.template prnt/drv/hpcups.drv.in.template
+ 
+ dist_noinst_DATA += prnt/ipp-usb/HPLIP.conf
+ dist_noinst_SCRIPTS += dat2drv.py install.py  hplip-install init-suse-firewall init-iptables-firewall class_rpm_build.sh hplipclassdriver.spec createPPD.sh Makefile_dat2drv hpijs-drv
+@@ -597,7 +597,7 @@
+ 	prnt/hpcups/ImageProcessor.h
+ 
+ hpcups_CXXFLAGS = $(APDK_ENDIAN_FLAG) $(DBUS_CFLAGS)
+-hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lImageProcessor -lcups -lcupsimage -lz $(DBUS_LIBS)
++hpcups_LDADD = -L./prnt/hpcups/ -ljpeg -ldl -lcups -lcupsimage -lz $(DBUS_LIBS)
+ #else
+ #hpcupsdir = $(cupsfilterdir)
+ #hpcups_PROGRAMS = hpcups
+@@ -687,16 +687,6 @@
+ 
+ install-data-hook:
+ if HPLIP_BUILD
+-	if [ \( "$(UNAME)" = "x86_64" -a  -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_64.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_64.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_64.so $(libdir)/libImageProcessor.so ; \
+-	fi; \
+-	if [ \( \( "$(UNAME)" = "i686" -o "$(UNAME)" = "i386" \) -a -d "$(libdir)/" \) ]; then \
+-		cp prnt/hpcups/libImageProcessor-x86_32.so $(libdir)/ ; \
+-		chmod 775 $(libdir)/libImageProcessor-x86_32.so ; \
+-		ln -sf $(libdir)/libImageProcessor-x86_32.so $(libdir)/libImageProcessor.so ; \
+-	fi
+ 	if [ -d "/usr/share/ipp-usb/quirks/" ]; then \
+ 		echo "ipp-usb directory exists"; \
+ 		cp prnt/ipp-usb/HPLIP.conf /usr/share/ipp-usb/quirks/ ; \
diff --git a/srcpkgs/hplip/patches/sane.patch b/srcpkgs/hplip/patches/sane.patch
deleted file mode 100644
index d3579638ee97..000000000000
--- a/srcpkgs/hplip/patches/sane.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/scan/sane.py	2020-10-13 22:29:59.456276307 -0400
-+++ b/scan/sane.py	2020-10-13 22:32:44.663586789 -0400
-@@ -378,14 +378,14 @@
- 
-     def isScanActive(self):
-         if self.scan_thread is not None:
--            return self.scan_thread.isAlive() and self.scan_thread.scan_active
-+            return self.scan_thread.is_alive() and self.scan_thread.scan_active
-         else:
-             return False
- 
- 
-     def waitForScanDone(self):
-         if self.scan_thread is not None and \
--            self.scan_thread.isAlive() and \
-+            self.scan_thread.is_alive() and \
-             self.scan_thread.scan_active:
- 
-             try:
-@@ -398,9 +398,9 @@
-         #time.sleep(0.5)
-         if self.scan_thread is not None:
-             while True:
--                #print self.scan_thread.isAlive()
-+                #print self.scan_thread.is_alive()
-                 #print self.scan_thread.scan_active
--                if self.scan_thread.isAlive() and \
-+                if self.scan_thread.is_alive() and \
-                     self.scan_thread.scan_active:
-                     return
- 
diff --git a/srcpkgs/hplip/template b/srcpkgs/hplip/template
index c6bc1a9b0df2..339d08b463d8 100644
--- a/srcpkgs/hplip/template
+++ b/srcpkgs/hplip/template
@@ -1,7 +1,7 @@
 # Template file for 'hplip'
 pkgname=hplip
-version=3.20.9
-revision=6
+version=3.21.10
+revision=1
 build_style=gnu-configure
 pycompile_dirs="usr/share/hplip"
 # configure checks sys.version[:3] for Python versioning, so 3.10 becomes 3.1;
@@ -19,6 +19,7 @@ configure_args="
  --enable-hpijs-install
  --enable-foomatic-drv-install
  --enable-pp-build
+ --disable-imageProcessor-build
  --with-mimedir=/usr/share/cups/mime
  am_cv_python_version=${py3_ver}"
 conf_files="/etc/hp/hplip.conf"
@@ -33,8 +34,9 @@ short_desc="HP Linux Imaging and Printing"
 maintainer="Orphaned <orphan@voidlinux.org>"
 license="GPL-2.0-only, BSD-3-Clause, MIT"
 homepage="https://developers.hp.com/hp-linux-imaging-and-printing"
+changelog="https://developers.hp.com/hp-linux-imaging-and-printing/release_notes"
 distfiles="${SOURCEFORGE_SITE}/hplip/hplip/${version}/hplip-${version}.tar.gz"
-checksum=36251189aa9cc349f6a3eacbb7ac3c4fd26fc9f087c9f75cee051010c85d2ddf
+checksum=de230e1fdd1e718fc718417265612e0c882949e08fe045ee56f9f9882e6b6a60
 conflicts="hplip-gui"
 
 CFLAGS="-I${XBPS_CROSS_BASE}/usr/include/libusb-1.0 -I${XBPS_CROSS_BASE}/${py3_inc}"

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (9 preceding siblings ...)
  2021-11-28 11:46 ` [PR PATCH] [Updated] " heindsight
@ 2021-12-06 21:42 ` ahesford
  2021-12-07 20:27 ` biopsin
                   ` (2 subsequent siblings)
  13 siblings, 0 replies; 15+ messages in thread
From: ahesford @ 2021-12-06 21:42 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 204 bytes --]

New comment by ahesford on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-987259580

Comment:
@biopsin, have you had a chance to dig into the scanner issue?

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (10 preceding siblings ...)
  2021-12-06 21:42 ` ahesford
@ 2021-12-07 20:27 ` biopsin
  2021-12-08  1:05 ` [PR PATCH] [Merged]: " ahesford
  2021-12-30 11:25 ` biopsin
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-12-07 20:27 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 293 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-988241456

Comment:
@ahesford go ahead and merge this, I will fiddle with it in the upcomming hollydays. 
I'll rather open a issue if something is amiss with the template.

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: [PR PATCH] [Merged]: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (11 preceding siblings ...)
  2021-12-07 20:27 ` biopsin
@ 2021-12-08  1:05 ` ahesford
  2021-12-30 11:25 ` biopsin
  13 siblings, 0 replies; 15+ messages in thread
From: ahesford @ 2021-12-08  1:05 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1522 bytes --]

There's a merged pull request on the void-packages repository

hplip: Update to 3.21.10
https://github.com/void-linux/void-packages/pull/33832

Description:
Update hplip to latest upstream version and patch to fix Python 3.10 compatibility.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: hplip: Update to 3.21.10
  2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
                   ` (12 preceding siblings ...)
  2021-12-08  1:05 ` [PR PATCH] [Merged]: " ahesford
@ 2021-12-30 11:25 ` biopsin
  13 siblings, 0 replies; 15+ messages in thread
From: biopsin @ 2021-12-30 11:25 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 529 bytes --]

New comment by biopsin on void-packages repository

https://github.com/void-linux/void-packages/pull/33832#issuecomment-1002987653

Comment:
[Solved and Note]
After a hplip update, to make the scanner pickup the changes,run `"$ hp-plugin"` again and reinstall the scanner plugin. While the prosess it will complain and  

> warning: void distro is not found in AUTH_TYPES

> error: Unable to recieve key from keyserver

but the plugin will eventually install successfull and xsane works again.

Anyway happy new year !!

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2021-12-30 11:25 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-30 18:07 [PR PATCH] hplip: Update to 3.21.8 heindsight
2021-10-31  8:40 ` biopsin
2021-11-04 13:38 ` biopsin
2021-11-05 10:26 ` biopsin
2021-11-05 17:55 ` heindsight
2021-11-05 18:43 ` [PR PATCH] [Updated] " heindsight
2021-11-05 20:16 ` [PR PATCH] [Updated] hplip: Update to 3.21.10 heindsight
2021-11-09 13:20 ` biopsin
2021-11-09 19:30 ` heindsight
2021-11-23 10:01 ` biopsin
2021-11-28 11:46 ` [PR PATCH] [Updated] " heindsight
2021-12-06 21:42 ` ahesford
2021-12-07 20:27 ` biopsin
2021-12-08  1:05 ` [PR PATCH] [Merged]: " ahesford
2021-12-30 11:25 ` biopsin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).