[-- Attachment #1: Type: text/plain, Size: 1738 bytes --] There is a new pull request by mobinmob against master on the void-packages repository https://github.com/mobinmob/void-packages monerod-fix https://github.com/void-linux/void-packages/pull/32460 monero: fix runit script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds after with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/32460.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-monerod-fix-32460.patch --] [-- Type: text/x-diff, Size: 1292 bytes --] From 1b20490e47ceb02831c109ba689def7a63dffaf9 Mon Sep 17 00:00:00 2001 From: mobinmob <mobinmob@disroot.org> Date: Thu, 12 Aug 2021 00:25:05 +0300 Subject: [PATCH] monero: fix runit script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds after with 'EOF on stdin, exiting'. --- srcpkgs/monero/files/monerod/run | 2 +- srcpkgs/monero/template | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/monero/files/monerod/run b/srcpkgs/monero/files/monerod/run index 0d120dc8afe8..bc06010c7c2e 100644 --- a/srcpkgs/monero/files/monerod/run +++ b/srcpkgs/monero/files/monerod/run @@ -1,2 +1,2 @@ #!/bin/sh -exec chpst -u monero:monero /usr/bin/monerod --config-file /etc/monerod.conf +exec chpst -u monero:monero /usr/bin/monerod --non-interactive --config-file /etc/monerod.conf diff --git a/srcpkgs/monero/template b/srcpkgs/monero/template index 3617a446f098..3fffef95ba57 100644 --- a/srcpkgs/monero/template +++ b/srcpkgs/monero/template @@ -1,7 +1,7 @@ # Template file for 'monero' pkgname=monero version=0.17.2.0 -revision=1 +revision=2 _randomx_version="1.1.8" # the revision monero uses as a submodule for the specific version _rapidjson_gitrev="129d19ba7f496df5e33658527a7158c79b99c21c"
[-- Attachment #1: Type: text/plain, Size: 1743 bytes --] There is an updated pull request by mobinmob against master on the void-packages repository https://github.com/mobinmob/void-packages monerod-fix https://github.com/void-linux/void-packages/pull/32460 monero: fix runit script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds after with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/32460.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-monerod-fix-32460.patch --] [-- Type: text/x-diff, Size: 1302 bytes --] From bb1bc8e81f7889bc4b333b079af2ba90cddf4271 Mon Sep 17 00:00:00 2001 From: mobinmob <mobinmob@disroot.org> Date: Thu, 12 Aug 2021 00:25:05 +0300 Subject: [PATCH] monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds after with 'EOF on stdin, exiting'. --- srcpkgs/monero/files/monerod/run | 2 +- srcpkgs/monero/template | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/monero/files/monerod/run b/srcpkgs/monero/files/monerod/run index 0d120dc8afe8..bc06010c7c2e 100644 --- a/srcpkgs/monero/files/monerod/run +++ b/srcpkgs/monero/files/monerod/run @@ -1,2 +1,2 @@ #!/bin/sh -exec chpst -u monero:monero /usr/bin/monerod --config-file /etc/monerod.conf +exec chpst -u monero:monero /usr/bin/monerod --non-interactive --config-file /etc/monerod.conf diff --git a/srcpkgs/monero/template b/srcpkgs/monero/template index 3617a446f098..3fffef95ba57 100644 --- a/srcpkgs/monero/template +++ b/srcpkgs/monero/template @@ -1,7 +1,7 @@ # Template file for 'monero' pkgname=monero version=0.17.2.0 -revision=1 +revision=2 _randomx_version="1.1.8" # the revision monero uses as a submodule for the specific version _rapidjson_gitrev="129d19ba7f496df5e33658527a7158c79b99c21c"
[-- Attachment #1: Type: text/plain, Size: 1753 bytes --] There is an updated pull request by mobinmob against master on the void-packages repository https://github.com/mobinmob/void-packages monerod-fix https://github.com/void-linux/void-packages/pull/32460 monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds after with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/32460.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-monerod-fix-32460.patch --] [-- Type: text/x-diff, Size: 1296 bytes --] From 5e62bc42af5ab2f7ac38f3d0f8f31c34f54c7bd3 Mon Sep 17 00:00:00 2001 From: mobinmob <mobinmob@disroot.org> Date: Thu, 12 Aug 2021 00:25:05 +0300 Subject: [PATCH] monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. --- srcpkgs/monero/files/monerod/run | 2 +- srcpkgs/monero/template | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/monero/files/monerod/run b/srcpkgs/monero/files/monerod/run index 0d120dc8afe8..bc06010c7c2e 100644 --- a/srcpkgs/monero/files/monerod/run +++ b/srcpkgs/monero/files/monerod/run @@ -1,2 +1,2 @@ #!/bin/sh -exec chpst -u monero:monero /usr/bin/monerod --config-file /etc/monerod.conf +exec chpst -u monero:monero /usr/bin/monerod --non-interactive --config-file /etc/monerod.conf diff --git a/srcpkgs/monero/template b/srcpkgs/monero/template index 3617a446f098..3fffef95ba57 100644 --- a/srcpkgs/monero/template +++ b/srcpkgs/monero/template @@ -1,7 +1,7 @@ # Template file for 'monero' pkgname=monero version=0.17.2.0 -revision=1 +revision=2 _randomx_version="1.1.8" # the revision monero uses as a submodule for the specific version _rapidjson_gitrev="129d19ba7f496df5e33658527a7158c79b99c21c"
[-- Attachment #1: Type: text/plain, Size: 1747 bytes --] There is an updated pull request by mobinmob against master on the void-packages repository https://github.com/mobinmob/void-packages monerod-fix https://github.com/void-linux/void-packages/pull/32460 monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/32460.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-monerod-fix-32460.patch --] [-- Type: text/x-diff, Size: 1296 bytes --] From b70567f478e9d9858bcf38e36931e4f31994825f Mon Sep 17 00:00:00 2001 From: mobinmob <mobinmob@disroot.org> Date: Thu, 12 Aug 2021 00:25:05 +0300 Subject: [PATCH] monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. --- srcpkgs/monero/files/monerod/run | 2 +- srcpkgs/monero/template | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/monero/files/monerod/run b/srcpkgs/monero/files/monerod/run index 0d120dc8afe8..bc06010c7c2e 100644 --- a/srcpkgs/monero/files/monerod/run +++ b/srcpkgs/monero/files/monerod/run @@ -1,2 +1,2 @@ #!/bin/sh -exec chpst -u monero:monero /usr/bin/monerod --config-file /etc/monerod.conf +exec chpst -u monero:monero /usr/bin/monerod --non-interactive --config-file /etc/monerod.conf diff --git a/srcpkgs/monero/template b/srcpkgs/monero/template index 3617a446f098..3fffef95ba57 100644 --- a/srcpkgs/monero/template +++ b/srcpkgs/monero/template @@ -1,7 +1,7 @@ # Template file for 'monero' pkgname=monero version=0.17.2.0 -revision=1 +revision=2 _randomx_version="1.1.8" # the revision monero uses as a submodule for the specific version _rapidjson_gitrev="129d19ba7f496df5e33658527a7158c79b99c21c"
[-- Attachment #1: Type: text/plain, Size: 243 bytes --] New comment by mobinmob on void-packages repository https://github.com/void-linux/void-packages/pull/32460#issuecomment-901259800 Comment: - Reword the commit message to make it more clear, - Rebase on master to force rebuild and clear ci.
[-- Attachment #1: Type: text/plain, Size: 1742 bytes --] There is an updated pull request by sgn against master on the void-packages repository https://github.com/mobinmob/void-packages monerod-fix https://github.com/void-linux/void-packages/pull/32460 monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/32460.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-monerod-fix-32460.patch --] [-- Type: text/x-diff, Size: 1296 bytes --] From b70567f478e9d9858bcf38e36931e4f31994825f Mon Sep 17 00:00:00 2001 From: mobinmob <mobinmob@disroot.org> Date: Thu, 12 Aug 2021 00:25:05 +0300 Subject: [PATCH] monero: fix monerod service script. Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. --- srcpkgs/monero/files/monerod/run | 2 +- srcpkgs/monero/template | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/monero/files/monerod/run b/srcpkgs/monero/files/monerod/run index 0d120dc8afe8..bc06010c7c2e 100644 --- a/srcpkgs/monero/files/monerod/run +++ b/srcpkgs/monero/files/monerod/run @@ -1,2 +1,2 @@ #!/bin/sh -exec chpst -u monero:monero /usr/bin/monerod --config-file /etc/monerod.conf +exec chpst -u monero:monero /usr/bin/monerod --non-interactive --config-file /etc/monerod.conf diff --git a/srcpkgs/monero/template b/srcpkgs/monero/template index 3617a446f098..3fffef95ba57 100644 --- a/srcpkgs/monero/template +++ b/srcpkgs/monero/template @@ -1,7 +1,7 @@ # Template file for 'monero' pkgname=monero version=0.17.2.0 -revision=1 +revision=2 _randomx_version="1.1.8" # the revision monero uses as a submodule for the specific version _rapidjson_gitrev="129d19ba7f496df5e33658527a7158c79b99c21c"
[-- Attachment #1: Type: text/plain, Size: 180 bytes --] New comment by Piraty on void-packages repository https://github.com/void-linux/void-packages/pull/32460#issuecomment-955607384 Comment: remove that merge commit from the branch
[-- Attachment #1: Type: text/plain, Size: 145 bytes --] New comment by Piraty on void-packages repository https://github.com/void-linux/void-packages/pull/32460#issuecomment-1008422836 Comment: ping
[-- Attachment #1: Type: text/plain, Size: 186 bytes --] New comment by mobinmob on void-packages repository https://github.com/void-linux/void-packages/pull/32460#issuecomment-1009238491 Comment: @Piraty I did not push that merge commit...
[-- Attachment #1: Type: text/plain, Size: 1585 bytes --] There's a closed pull request on the void-packages repository monero: fix monerod service script. https://github.com/void-linux/void-packages/pull/32460 Description: Without the --non-interactive switch the daemon starts in the foreground but crashes after a few seconds with 'EOF on stdin, exiting'. <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [X] I generally don't use the affected packages but briefly tested this PR <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl -->