[-- Attachment #1: Type: text/plain, Size: 2172 bytes --] There is a new pull request by Gigahawk against master on the void-packages repository https://github.com/Gigahawk/void-packages prusaslicer_update https://github.com/void-linux/void-packages/pull/35105 PrusaSlicer: update to 2.4.0. <!-- Uncomment relevant sections and delete options which are not applicable --> #### Testing the changes - I tested the changes in this PR: **NO** Having trouble getting this to build ``` => PrusaSlicer-2.4.0_1: removing autodeps, please wait... => ERROR: PrusaSlicer-2.4.0_1: failed to install target dependencies! (error 8) enchant2-2.2.15_4: broken, unresolvable shlib `libicudata.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicudata.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicui18n.so.69' webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicui18n.so.69' enchant2-2.2.15_4: broken, unresolvable shlib `libicuuc.so.69' libharfbuzz-2.9.1_2: broken, unresolvable shlib `libicuuc.so.69' libnuspell-5.0.1_1: broken, unresolvable shlib `libicuuc.so.69' libpsl-0.21.1_2: broken, unresolvable shlib `libicuuc.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicuuc.so.69' webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicuuc.so.69' Transaction aborted due to unresolved shlibs. => ERROR: Please see above for the real error, exiting... ``` <!-- #### New package - This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO** --> <!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration) and test at least one native build and, if supported, at least one cross build. Ignore this section if this PR is not skipping CI. --> <!-- #### Local build testing - I built this PR locally for my native architecture, (ARCH-LIBC) - I built this PR locally for these architectures (if supported. mark crossbuilds): - aarch64-musl - armv7l - armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-prusaslicer_update-35105.patch --] [-- Type: text/x-diff, Size: 1158 bytes --] From 808a435bb72ab1bcb0a6e02439b96f5e862b5745 Mon Sep 17 00:00:00 2001 From: Jasper Chan <jasperchan515@gmail.com> Date: Tue, 18 Jan 2022 02:19:51 -0800 Subject: [PATCH] PrusaSlicer: update to 2.4.0. --- srcpkgs/PrusaSlicer/template | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template index dd0e76cb8017..e5a13d2a8edc 100644 --- a/srcpkgs/PrusaSlicer/template +++ b/srcpkgs/PrusaSlicer/template @@ -1,6 +1,6 @@ # Template file for 'PrusaSlicer' pkgname=PrusaSlicer -version=2.3.0 +version=2.4.0 revision=1 wrksrc="PrusaSlicer-version_${version}" build_style=cmake @@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>" license="GPL-3.0-or-later" homepage="https://www.prusa3d.com/prusaslicer/" distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz" -checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5 +checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2 nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio" Slic3rPE_package() {
[-- Attachment #1: Type: text/plain, Size: 2372 bytes --] There is an updated pull request by Gigahawk against master on the void-packages repository https://github.com/Gigahawk/void-packages prusaslicer_update https://github.com/void-linux/void-packages/pull/35105 PrusaSlicer: update to 2.4.0. <!-- Uncomment relevant sections and delete options which are not applicable --> #### Testing the changes - I tested the changes in this PR: **NO** Having trouble getting this to build ``` => PrusaSlicer-2.4.0_1: removing autodeps, please wait... => ERROR: PrusaSlicer-2.4.0_1: failed to install target dependencies! (error 8) enchant2-2.2.15_4: broken, unresolvable shlib `libicudata.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicudata.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicui18n.so.69' webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicui18n.so.69' enchant2-2.2.15_4: broken, unresolvable shlib `libicuuc.so.69' libharfbuzz-2.9.1_2: broken, unresolvable shlib `libicuuc.so.69' libnuspell-5.0.1_1: broken, unresolvable shlib `libicuuc.so.69' libpsl-0.21.1_2: broken, unresolvable shlib `libicuuc.so.69' libxml2-2.9.10_5: broken, unresolvable shlib `libicuuc.so.69' webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicuuc.so.69' Transaction aborted due to unresolved shlibs. => ERROR: Please see above for the real error, exiting... ``` EDIT: Been a long time since I had to do a version bump, forgot about this whole unresolvable shlib thing. Perhaps it would be good to mention this under CONTRIBUTING.md or Manual.md? - #35107 <!-- #### New package - This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO** --> <!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration) and test at least one native build and, if supported, at least one cross build. Ignore this section if this PR is not skipping CI. --> <!-- #### Local build testing - I built this PR locally for my native architecture, (ARCH-LIBC) - I built this PR locally for these architectures (if supported. mark crossbuilds): - aarch64-musl - armv7l - armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-prusaslicer_update-35105.patch --] [-- Type: text/x-diff, Size: 3102 bytes --] From db79b254755b12d6df7d75183c2fe4c0f8e90cc2 Mon Sep 17 00:00:00 2001 From: Jasper Chan <jasperchan515@gmail.com> Date: Tue, 18 Jan 2022 02:19:51 -0800 Subject: [PATCH] PrusaSlicer: update to 2.4.0. --- srcpkgs/GanttProject/template | 15 +++++++++++++++ srcpkgs/PrusaSlicer/patches/cross.patch | 11 ----------- srcpkgs/PrusaSlicer/template | 4 ++-- 3 files changed, 17 insertions(+), 13 deletions(-) create mode 100644 srcpkgs/GanttProject/template delete mode 100644 srcpkgs/PrusaSlicer/patches/cross.patch diff --git a/srcpkgs/GanttProject/template b/srcpkgs/GanttProject/template new file mode 100644 index 000000000000..7718fb6b133d --- /dev/null +++ b/srcpkgs/GanttProject/template @@ -0,0 +1,15 @@ +# Template file for 'GanttProject' +pkgname=GanttProject +version=2.8.10 +revision=1 +srcdir="bardsoftware-ganttproject-b6f4359" +build_style=gnu-configure +hostmakedepends="" +makedepends="" +depends="" +short_desc="free project scheduling and management app" +maintainer="Jasper Chan <jasperchan515@gmail.com>" +license="GPL-3.0-or-later" +homepage="https://www.ganttproject.biz/" +distfiles="${SOURCEFORGE_SITE}/ganttproject/ganttproject-${version}/GanttProject%20${version}.tar.gz>GanttProject-${version}.tar.gz" +checksum=f46ac4649ba1c6a9741aa9518c83b84db5b06a2700285a9a74ce707aff877c45 diff --git a/srcpkgs/PrusaSlicer/patches/cross.patch b/srcpkgs/PrusaSlicer/patches/cross.patch deleted file mode 100644 index d64a450d9e9f..000000000000 --- a/srcpkgs/PrusaSlicer/patches/cross.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/avrdude/CMakeLists.txt 2020-06-04 09:19:26.017251215 +0200 -+++ b/src/avrdude/CMakeLists.txt 2020-06-04 09:19:36.468250771 +0200 -@@ -83,7 +83,7 @@ add_executable(avrdude-conf-gen conf-gen - add_custom_command( - DEPENDS avrdude-conf-gen ${CMAKE_CURRENT_SOURCE_DIR}/avrdude-slic3r.conf - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h -- COMMAND $<TARGET_FILE:avrdude-conf-gen> avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h -+ COMMAND avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h - WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} - ) - diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template index dd0e76cb8017..e5a13d2a8edc 100644 --- a/srcpkgs/PrusaSlicer/template +++ b/srcpkgs/PrusaSlicer/template @@ -1,6 +1,6 @@ # Template file for 'PrusaSlicer' pkgname=PrusaSlicer -version=2.3.0 +version=2.4.0 revision=1 wrksrc="PrusaSlicer-version_${version}" build_style=cmake @@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>" license="GPL-3.0-or-later" homepage="https://www.prusa3d.com/prusaslicer/" distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz" -checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5 +checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2 nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio" Slic3rPE_package() {
[-- Attachment #1: Type: text/plain, Size: 1282 bytes --] There is an updated pull request by Gigahawk against master on the void-packages repository https://github.com/Gigahawk/void-packages prusaslicer_update https://github.com/void-linux/void-packages/pull/35105 PrusaSlicer: update to 2.4.0. <!-- Uncomment relevant sections and delete options which are not applicable --> #### Testing the changes - I tested the changes in this PR: **YES** Sliced and exported a part, seems to work fine. <!-- #### New package - This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO** --> <!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration) and test at least one native build and, if supported, at least one cross build. Ignore this section if this PR is not skipping CI. --> #### Local build testing - I built this PR locally for my native architecture, (x86_64) <!-- - I built this PR locally for these architectures (if supported. mark crossbuilds): - aarch64-musl - armv7l - armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-prusaslicer_update-35105.patch --] [-- Type: text/x-diff, Size: 2200 bytes --] From cc077b58d646b6ccd00fc0855a233716b4310b6e Mon Sep 17 00:00:00 2001 From: Jasper Chan <jasperchan515@gmail.com> Date: Wed, 19 Jan 2022 00:06:29 -0800 Subject: [PATCH] PrusaSlicer: update to 2.4.0. --- srcpkgs/PrusaSlicer/patches/cross.patch | 11 ----------- srcpkgs/PrusaSlicer/template | 4 ++-- 2 files changed, 2 insertions(+), 13 deletions(-) delete mode 100644 srcpkgs/PrusaSlicer/patches/cross.patch diff --git a/srcpkgs/PrusaSlicer/patches/cross.patch b/srcpkgs/PrusaSlicer/patches/cross.patch deleted file mode 100644 index d64a450d9e9f..000000000000 --- a/srcpkgs/PrusaSlicer/patches/cross.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/src/avrdude/CMakeLists.txt 2020-06-04 09:19:26.017251215 +0200 -+++ b/src/avrdude/CMakeLists.txt 2020-06-04 09:19:36.468250771 +0200 -@@ -83,7 +83,7 @@ add_executable(avrdude-conf-gen conf-gen - add_custom_command( - DEPENDS avrdude-conf-gen ${CMAKE_CURRENT_SOURCE_DIR}/avrdude-slic3r.conf - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h -- COMMAND $<TARGET_FILE:avrdude-conf-gen> avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h -+ COMMAND avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h - WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} - ) - diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template index dd0e76cb8017..e5a13d2a8edc 100644 --- a/srcpkgs/PrusaSlicer/template +++ b/srcpkgs/PrusaSlicer/template @@ -1,6 +1,6 @@ # Template file for 'PrusaSlicer' pkgname=PrusaSlicer -version=2.3.0 +version=2.4.0 revision=1 wrksrc="PrusaSlicer-version_${version}" build_style=cmake @@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>" license="GPL-3.0-or-later" homepage="https://www.prusa3d.com/prusaslicer/" distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz" -checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5 +checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2 nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio" Slic3rPE_package() {
[-- Attachment #1: Type: text/plain, Size: 268 bytes --] New review comment by Gigahawk on void-packages repository https://github.com/void-linux/void-packages/pull/35105#discussion_r787443997 Comment: The code this file is patching no longer seems to exist. I assume removing this is OK since `nocross` is set anyways.
[-- Attachment #1: Type: text/plain, Size: 2477 bytes --] New comment by Gigahawk on void-packages repository https://github.com/void-linux/void-packages/pull/35105#issuecomment-1016257406 Comment: The build errors for i686 I assume have to do with the `icu` stuff still being in the backlog: ``` [/tsutil/creststn/TestBinaryCollationData] *Note* some errors are data-loading related. If the data used is not the stock ICU data (i.e some have been added or removed), consider using the '-w' option to turn these errors into warnings. Elapsed Time: 00:00:16.417 make[2]: *** [Makefile:98: check-local] Error 1 make[2]: Leaving directory '/builddir/icu/source/test/cintltst' ------------- | *** FAILING TEST SUMMARY FOR: intltest TestGetSize ResourceBundleTest utility | *** END FAILING TEST SUMMARY FOR: intltest ------------- | *** FAILING TEST SUMMARY FOR: cintltst /tsutil/crestst/TestGetSize /tsutil/creststn/TestNewTypes /tsutil/creststn/TestBinaryCollationData | *** END FAILING TEST SUMMARY FOR: cintltst --------------- ALL TESTS SUMMARY: ok: testdata iotest ===== ERRS: intltest cintltst make[1]: *** [Makefile:91: check-recursive] Error 1 make[1]: Leaving directory '/builddir/icu/source/test' make: *** [Makefile:153: check-recursive] Error 2 => ERROR: icu-70.1_1: do_check: '${make_cmd} ${make_check_args} ${make_check_target}' exited with 2 => ERROR: in do_check() at common/build-style/gnu-configure.sh:33 Error: Process completed with exit code 1. ``` I'm not sure what to make of the x86_64-musl errors, it looks like a test is failing (presumably due to differences between musl and glibc) ``` Testing Mutable priority queue - first pop ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libslic3r_tests is a Catch v2.13.6 host application. Run with -? for options ------------------------------------------------------------------------------- Mutable priority queue - first pop ------------------------------------------------------------------------------- /builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:343 ............................................................................... /builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:367: FAILED: CHECK( valid ) with expansion: false Testing Mutable priority queue complex Passed in 0.005678 [seconds] ```
[-- Attachment #1: Type: text/plain, Size: 2687 bytes --] New comment by Gigahawk on void-packages repository https://github.com/void-linux/void-packages/pull/35105#issuecomment-1016257406 Comment: The build errors for i686 I assume have to do with the `icu` stuff still being in the backlog: ``` [/tsutil/creststn/TestBinaryCollationData] *Note* some errors are data-loading related. If the data used is not the stock ICU data (i.e some have been added or removed), consider using the '-w' option to turn these errors into warnings. Elapsed Time: 00:00:16.417 make[2]: *** [Makefile:98: check-local] Error 1 make[2]: Leaving directory '/builddir/icu/source/test/cintltst' ------------- | *** FAILING TEST SUMMARY FOR: intltest TestGetSize ResourceBundleTest utility | *** END FAILING TEST SUMMARY FOR: intltest ------------- | *** FAILING TEST SUMMARY FOR: cintltst /tsutil/crestst/TestGetSize /tsutil/creststn/TestNewTypes /tsutil/creststn/TestBinaryCollationData | *** END FAILING TEST SUMMARY FOR: cintltst --------------- ALL TESTS SUMMARY: ok: testdata iotest ===== ERRS: intltest cintltst make[1]: *** [Makefile:91: check-recursive] Error 1 make[1]: Leaving directory '/builddir/icu/source/test' make: *** [Makefile:153: check-recursive] Error 2 => ERROR: icu-70.1_1: do_check: '${make_cmd} ${make_check_args} ${make_check_target}' exited with 2 => ERROR: in do_check() at common/build-style/gnu-configure.sh:33 Error: Process completed with exit code 1. ``` I'm not sure what to make of the x86_64-musl errors, it looks like a test is failing (presumably due to differences between musl and glibc) ``` Testing Mutable priority queue - first pop ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ libslic3r_tests is a Catch v2.13.6 host application. Run with -? for options ------------------------------------------------------------------------------- Mutable priority queue - first pop ------------------------------------------------------------------------------- /builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:343 ............................................................................... /builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:367: FAILED: CHECK( valid ) with expansion: false Testing Mutable priority queue complex Passed in 0.005678 [seconds] ``` It looks like this test is either new or failing as of this new version, running CI against 2.3.0 doesn't produce any problems https://github.com/Gigahawk/void-packages/runs/4865799953?check_suite_focus=true
[-- Attachment #1: Type: text/plain, Size: 207 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/35105#issuecomment-1023968428 Comment: d5123dd31980758c2a5700d480555e35798edfcd Thank you for the PR!
[-- Attachment #1: Type: text/plain, Size: 1113 bytes --] There's a closed pull request on the void-packages repository PrusaSlicer: update to 2.4.0. https://github.com/void-linux/void-packages/pull/35105 Description: <!-- Uncomment relevant sections and delete options which are not applicable --> #### Testing the changes - I tested the changes in this PR: **YES** Sliced and exported a part, seems to work fine. <!-- #### New package - This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO** --> <!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration) and test at least one native build and, if supported, at least one cross build. Ignore this section if this PR is not skipping CI. --> #### Local build testing - I built this PR locally for my native architecture, (x86_64) <!-- - I built this PR locally for these architectures (if supported. mark crossbuilds): - aarch64-musl - armv7l - armv6l-musl -->
[-- Attachment #1: Type: text/plain, Size: 182 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/34924#issuecomment-1023968741 Comment: d5123dd31980758c2a5700d480555e35798edfcd