From: mobinmob <mobinmob@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: Re: [PR PATCH] [Updated] [WIP] New package: boot-66serv-2.4.1.
Date: Sun, 05 Feb 2023 19:41:21 +0100 [thread overview]
Message-ID: <20230205184121.MOS3qWr8TNSEI0gG6lFUjqkFUyx2FlcPB23NRfFuhDk@z> (raw)
In-Reply-To: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-25743@inbox.vuxu.org>
[-- Attachment #1: Type: text/plain, Size: 945 bytes --]
There is an updated pull request by mobinmob against master on the void-packages repository
https://github.com/mobinmob/void-packages boot-66serv
https://github.com/void-linux/void-packages/pull/25743
[WIP] New package: boot-66serv-2.4.1.
This PR is the continuation of the packaging and integration work @teldra has done on https://github.com/void-linux/void-packages/pull/23122, which is based on the work @zenfailure has done on https://github.com/void-linux/void-packages/pull/21142. They have done pretty much all the basic work needed -and then some- to integrate @Obarun 's work with void's packaging.
In this PR I will continue their work, try to make the configuration and switch from one init to the other as smooth as possible and package the frontend service files from https://github.com/mobinmob/void-66-services once they are ready.
A patch file from https://github.com/void-linux/void-packages/pull/25743.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-boot-66serv-25743.patch --]
[-- Type: text/x-diff, Size: 116896 bytes --]
From 0910ecdba279363ab84fc22e41c2d5a65d24e682 Mon Sep 17 00:00:00 2001
From: mobinmob <mobinmob@disroot.org>
Date: Sun, 5 Feb 2023 20:39:31 +0200
Subject: [PATCH 1/5] New package: boot-66serv-2.4.1
based on:
https://github.com/void-linux/void-packages/pull/23122 (by @teldra )
https://github.com/void-linux/void-packages/pull/21142 (by @zenfailure )
---
srcpkgs/boot-66serv/INSTALL.msg | 2 +
srcpkgs/boot-66serv/files/66 | 2 +
.../boot-66serv/files/66boot-initial-setup | 64 ++++
srcpkgs/boot-66serv/files/66boot-rcdotconf | 109 +++++++
.../boot-66serv/files/66boot-storage-autoconf | 154 +++++++++
srcpkgs/boot-66serv/files/runit | 35 +++
srcpkgs/boot-66serv/files/runit-wrapsv@ | 9 +
srcpkgs/boot-66serv/files/switch-initutils | 13 +
srcpkgs/boot-66serv/files/switch-initutils-66 | 31 ++
srcpkgs/boot-66serv/files/sysctl.sh | 26 ++
...evices-devices-first-pass-at-improvi.patch | 157 ++++++++++
...ure-add-checks-to-make-the-process-m.patch | 295 ++++++++++++++++++
...evices-devices-add-c-dev-null-to-the.patch | 68 ++++
...igure-configure-add-back-tmpfile-con.patch | 34 ++
...onfigure-configure-fix-zfs-detection.patch | 39 +++
...dmraid-first-pass-at-making-the-serv.patch | 41 +++
...mdraid-first-pass-at-adding-mdraid-s.patch | 83 +++++
...ate-configuration-to-reflect-changes.patch | 71 +++++
...ure-add-support-for-mdraid-add-some-.patch | 95 ++++++
...-MDRAID-and-CHECK_CONFIGURATION-as-c.patch | 39 +++
.../patches/0011-configure-more-fixes.patch | 79 +++++
.../patches/0012-configure-more-changes.patch | 60 ++++
...-ZFS_IMPORT-check-only-with-CHECK_CO.patch | 25 ++
...-service-boot-try-to-have-consistent.patch | 58 ++++
...re-add-code-for-MDRAID-and-CHECK_CON.patch | 117 +++++++
...unt-swap-partially-revert-previous-c.patch | 28 ++
...ure-properly-disable-devices-mdraid-.patch | 62 ++++
...ure-add-a-message-and-a-small-sleep-.patch | 50 +++
...-information-abouts-keys-that-do-not.patch | 102 ++++++
...odules-system-use-the-void-runit-mod.patch | 31 ++
...sctl-use-code-from-runit-void-for-sy.patch | 29 ++
...nt-efivarfs-rw-to-follow-voidlinux-p.patch | 26 ++
.../0023-Remove-tmpfiles-support.patch | 210 +++++++++++++
srcpkgs/boot-66serv/template | 61 ++++
34 files changed, 2305 insertions(+)
create mode 100755 srcpkgs/boot-66serv/INSTALL.msg
create mode 100644 srcpkgs/boot-66serv/files/66
create mode 100755 srcpkgs/boot-66serv/files/66boot-initial-setup
create mode 100755 srcpkgs/boot-66serv/files/66boot-rcdotconf
create mode 100755 srcpkgs/boot-66serv/files/66boot-storage-autoconf
create mode 100644 srcpkgs/boot-66serv/files/runit
create mode 100644 srcpkgs/boot-66serv/files/runit-wrapsv@
create mode 100755 srcpkgs/boot-66serv/files/switch-initutils
create mode 100644 srcpkgs/boot-66serv/files/switch-initutils-66
create mode 100755 srcpkgs/boot-66serv/files/sysctl.sh
create mode 100644 srcpkgs/boot-66serv/patches/0001-service-system-devices-devices-first-pass-at-improvi.patch
create mode 100644 srcpkgs/boot-66serv/patches/0002-configure-configure-add-checks-to-make-the-process-m.patch
create mode 100644 srcpkgs/boot-66serv/patches/0003-service-system-devices-devices-add-c-dev-null-to-the.patch
create mode 100644 srcpkgs/boot-66serv/patches/0004-module-boot-configure-configure-add-back-tmpfile-con.patch
create mode 100644 srcpkgs/boot-66serv/patches/0005-configure-configure-fix-zfs-detection.patch
create mode 100644 srcpkgs/boot-66serv/patches/0006-devices-devices-dmraid-first-pass-at-making-the-serv.patch
create mode 100644 srcpkgs/boot-66serv/patches/0007-devices-devices-mdraid-first-pass-at-adding-mdraid-s.patch
create mode 100644 srcpkgs/boot-66serv/patches/0008-doc-boot-.md-update-configuration-to-reflect-changes.patch
create mode 100644 srcpkgs/boot-66serv/patches/0009-configure-configure-add-support-for-mdraid-add-some-.patch
create mode 100644 srcpkgs/boot-66serv/patches/0010-service-boot-add-MDRAID-and-CHECK_CONFIGURATION-as-c.patch
create mode 100644 srcpkgs/boot-66serv/patches/0011-configure-more-fixes.patch
create mode 100644 srcpkgs/boot-66serv/patches/0012-configure-more-changes.patch
create mode 100644 srcpkgs/boot-66serv/patches/0013-configure-do-the-ZFS_IMPORT-check-only-with-CHECK_CO.patch
create mode 100644 srcpkgs/boot-66serv/patches/0014-doc-boot-.md-and-service-boot-try-to-have-consistent.patch
create mode 100644 srcpkgs/boot-66serv/patches/0015-Makefile-configure-add-code-for-MDRAID-and-CHECK_CON.patch
create mode 100644 srcpkgs/boot-66serv/patches/0016-service-mount-mount-swap-partially-revert-previous-c.patch
create mode 100644 srcpkgs/boot-66serv/patches/0017-configure-configure-properly-disable-devices-mdraid-.patch
create mode 100644 srcpkgs/boot-66serv/patches/0018-configure-configure-add-a-message-and-a-small-sleep-.patch
create mode 100644 srcpkgs/boot-66serv/patches/0019-doc-boot-.md-Add-information-abouts-keys-that-do-not.patch
create mode 100644 srcpkgs/boot-66serv/patches/0020-system-modules-modules-system-use-the-void-runit-mod.patch
create mode 100644 srcpkgs/boot-66serv/patches/0021-system-system-sysctl-use-code-from-runit-void-for-sy.patch
create mode 100644 srcpkgs/boot-66serv/patches/0022-populate-sys-mount-efivarfs-rw-to-follow-voidlinux-p.patch
create mode 100644 srcpkgs/boot-66serv/patches/0023-Remove-tmpfiles-support.patch
create mode 100755 srcpkgs/boot-66serv/template
diff --git a/srcpkgs/boot-66serv/INSTALL.msg b/srcpkgs/boot-66serv/INSTALL.msg
new file mode 100755
index 000000000000..72e28e5a9974
--- /dev/null
+++ b/srcpkgs/boot-66serv/INSTALL.msg
@@ -0,0 +1,2 @@
+Please re-enable the boot@system service after an update,
+by running '66-enable -t boot -F boot@system".
diff --git a/srcpkgs/boot-66serv/files/66 b/srcpkgs/boot-66serv/files/66
new file mode 100644
index 000000000000..2e5bb6a10a5f
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/66
@@ -0,0 +1,2 @@
+#!/usr/bin/execlineb -P
+66-boot -b "Booting Void Linux" -m
diff --git a/srcpkgs/boot-66serv/files/66boot-initial-setup b/srcpkgs/boot-66serv/files/66boot-initial-setup
new file mode 100755
index 000000000000..bd7570c2b016
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/66boot-initial-setup
@@ -0,0 +1,64 @@
+#!/bin/sh
+# Copyright 2021 mobinmob <mobinmob@disroot.org>
+# Use of this source code is governed by the 2-Clause BSD License
+# that can be found in the LICENSE file at the root project directory.
+# SPDX short identifier: BSD-2-Clause
+
+# This scripts create basic trees and enables services.
+# Excluding the common posix userland commands, the script needs 66-yeller
+# (from 66-tools), 66-env, 66-tree and 66-enable (from 66).
+
+# Variables for 66-yeller
+export PROG="66boot-initial-setup"
+export COLOR_ENABLED="1"
+export CLOCK_ENABLED="0"
+
+# Script must run as root, otherwise it creates trees
+# as the user.
+user=$(id -u)
+[ "$user" != "0" ] && 66-yeller -F %r You need to run this script as root! %n && exit 1
+
+# Information for the user, in case of failure. 66 output is informative, this
+# is just a pointer to the docs.
+msg_trees() {
+ # ${1} is the name of the tree
+ 66-yeller -W %b "An action for the [${1}] tree failed.
+Check the output before this message for a possibe cause and consult
+the 66-tree documentation." %n
+}
+
+msg_services() {
+ # ${1} is the name of a service
+ 66-yeller -F %r "Enabling the [${1}] service failed.
+Check the output before this message for a possibe cause and consult
+the 66-enable documentation." %n
+ exit 1
+}
+
+# Create the mandatory boot tree.
+66-tree -nz boot || msg_trees boot
+# Enable the boot@system service in the boot tree.
+66-enable -z -F -t boot boot@system || msg_services boot@system
+
+# Copy the default boot@conf so that it will survive updates and be accesible
+# though /etc/66rc.conf. Also, remove the warning in the first lines of the file.
+new_conf="/etc/66/conf/boot@system/version/boot@system"
+[ ! -f "$new_conf" ] && cp /etc/66/conf/boot@system/version/.boot@system "$new_conf" && \
+warn=$( sed -n -e "/##\ \[STARTWARN\]/p" /etc/66rc.conf | tr -d '[:space:]') && \
+ [ "$warn" = "##[STARTWARN]" ] && sed -i '1,5d' "$new_conf"
+
+# Create default tree, enable it and make it current.
+66-tree -z -nEc default || msg_trees default
+# Enable switch-initutils oneshot service in the default tree.
+66-enable -z switch-initutils || msg_services switch-initutils
+
+# Create and enable runit tree.
+66-tree -z -nE runit || msg_trees runit
+# Enable the runit service in the runit tree.
+66-enable -z -t runit runit || msg_services runit
+# Start runit tree after the default tree.
+66-tree -z -S default runit || msg_trees runit
+
+# Print on succesfull completion
+# shellcheck disable=SC2181
+if [ "$?" = 0 ]; then 66-yeller %g "Basic trees created and services enabled succesfully!"; fi
diff --git a/srcpkgs/boot-66serv/files/66boot-rcdotconf b/srcpkgs/boot-66serv/files/66boot-rcdotconf
new file mode 100755
index 000000000000..8c1b1924595a
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/66boot-rcdotconf
@@ -0,0 +1,109 @@
+#!/bin/sh
+# Copyright 2021 mobinmob <mobinmob@disroot.org>
+# Use of this source code is governed by the 2-Clause BSD License
+# that can be found in the LICENSE file at the root project directory.
+# SPDX short identifier: BSD-2-Clause
+
+# This script reads a **valid** rc.conf and writes the values to the
+# corresponding configuration options in the boot@system environment file.
+# Excluding the common posix userland commands, the script needs 66-yeller
+# (from 66-tools) and 66-env (from 66).
+
+# Variables for 66-yeller
+export PROG="66boot-rcdotconf"
+export COLOR_ENABLED="1"
+export CLOCK_ENABLED="0"
+
+
+# Script must run as root.
+user=$(id -u)
+[ "$user" != "0" ] && 66-yeller -F %r You need to run this script as root! %n && exit 1
+
+HOSTNAME=
+HOSTNAME1=
+HARDWARECLOCK=
+TIMEZONE=
+KEYMAP=
+FONT=
+FONT_MAP=
+FONT_UNIMAP=
+TTYS=
+
+apply_conf_from_to(){
+ # Set configuration value ${3} from ${1} to ${2}
+ # ${1} is the conf option from /etc/rc.conf
+ # ${2} is the conf option from the boot@ conf file
+ # ${3} is the value from the /etc/rc.conf option/var
+ if [ -n "${3}" ]
+ then
+ 66-env -t boot -r "${2}"=!"${3}" boot@system
+ 66-yeller %g "${2} set to [${3}]." %n
+ fi
+}
+
+set_hostname() {
+ # ${1} HOSTNAME value
+ [ -r /etc/hostname ] && HOSTNAME1="$( cat /etc/hostname )" && export HOSTNAME1
+
+ if [ -n "${1}" ]
+ then
+ 66-env -t boot -r HOSTNAME=!"${1}" boot@system
+ 66-yeller %g "HOSTNAME set to [${1}]." %n
+ elif [ -n "$HOSTNAME1" ]
+ then
+ 66-env -t boot -r HOSTNAME=!"$HOSTNAME1" boot@system
+ 66-yeller %g "HOSTNAME set to [$HOSTNAME1]." %n
+ elif [ -z "${1}" ] && [ -z "$HOSTNAME1" ]
+ then
+ 66-env -t boot -r HOSTNAME=!void-live boot@system
+ 66-yeller -W %b "No HOSTNAME set, reverting
+ to the default [void-live]." %n
+ fi
+}
+
+set_ttys() {
+ # Same positional args as apply_conf_from_to
+ if [ -n "${3}" ]
+ then
+ if [ "${3}" -lt 11 ] && [ "${3}" -gt 0 ]
+ then
+ apply_conf_from_to "${1}" "${2}" "${3}"
+ else
+ 66-env -t boot -r TTY=!4 boot@system
+ 66-yeller -W %b "${3} TTYS is not valid as a tty number,
+reverting to the default [4]." %n
+ exit 1
+ fi
+ else
+ 66-env -t boot -r TTY=!4 boot@system
+ 66-yeller -W %b "TTY number not set, reverting
+ to the default [4]." %n
+ fi
+}
+
+check_tz() {
+ # On installation timezone can be set by symlink and not by the
+ # TIMEZONE key in rc.conf. In that case follow the symlink.
+ if [ "$(realpath /etc/localtime | cut -d / -f 1,2,3,4)" = "/usr/share/zoneinfo" ]; then
+ TIMEZONE="$(realpath /etc/localtime | cut -d / -f 5,6)"
+ export TIMEZONE
+ fi
+}
+
+
+# shellcheck disable=SC1091
+. /etc/rc.conf
+
+check_tz
+set_hostname "$HOSTNAME"
+apply_conf_from_to TIMEZONE TZ "$TIMEZONE"
+apply_conf_from_to HARDWARECLOCK HARDWARECLOCK "$HARDWARECLOCK"
+apply_conf_from_to KEYMAP KEYMAP "$KEYMAP"
+apply_conf_from_to FONT_MAP FONT_MAP "$FONT_MAP"
+apply_conf_from_to FONT FONT "$FONT"
+apply_conf_from_to FONT_UNIMAP FONT_UNIMAP "$FONT_UNIMAP"
+set_ttys TTYS TTY "$TTYS"
+
+66-yeller %g "Please re-enable the boot@system service
+for the changes to take effect by running (as root):
+'66-enable -F -t boot boot@system' " %n
\ No newline at end of file
diff --git a/srcpkgs/boot-66serv/files/66boot-storage-autoconf b/srcpkgs/boot-66serv/files/66boot-storage-autoconf
new file mode 100755
index 000000000000..f098bbd6dc15
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/66boot-storage-autoconf
@@ -0,0 +1,154 @@
+#!/bin/sh
+
+# Copyright 2021 mobinmob <mobinmob@disroot.org>
+# Use of this source code is governed by the 2-Clause BSD License
+# that can be found in the LICENSE file at the root project directory.
+# SPDX short identifier: BSD-2-Clause
+
+# This script determines if the system has dmraid, luks, zfs, btrfs,
+# volumes, a swap partition or swapfile and configures the environment
+# file of the boot@system service accordingly.
+# Excluding the common posix userland commands, the script needs 66-which and 66-yeller
+# (from 66-tools), 66-env (from 66) and blkid (from util-linux).
+
+# Variables for 66-yeller
+export PROG="66boot-storage-autoconf"
+export COLOR_ENABLED="1"
+export CLOCK_ENABLED="0"
+
+# Script must run as root.
+user=$(id -u)
+[ "$user" != "0" ] && 66-yeller -F %r You need to run this script as root! %n && exit 1
+
+# blkid(8) from util-linux should be available for the script to function.
+[ "$(blkid -v | grep util-linux -c)" != "1" ] && \
+66-yeller -F %r You need blkid from util-linux to run this program! %n && exit 1
+
+detect_fs() {
+ # Uses blkid to detect partition TYPEs. The result is the number
+ # of detected partitions. TYPEs are available with `blkid -k`.
+ export "${1}"_detected="$(blkid -c /dev/null --match-token=TYPE="${1}" | wc -l )"
+}
+
+detect_swapfile() {
+ # Finds swap references in /etc/fstab.
+ swapfile_detected="$(awk '!/^(#)/' /etc/fstab | awk '$3=="swap" ' | wc -l )"
+ export swapfile_detected
+}
+
+detect_util() {
+ # Uses 66-which to determine if a utility exists.
+ # Output is $fs_util_exitst=0 (or 1)
+ # ${1} is the variable for the utility, in the form of "$fs_util"
+ # ${2} is the name of the executable
+ export "${1}"_exists="$(66-which "${2}" | wc -l)"
+}
+
+check_and_apply_conf() {
+ # Checks for partition types and the existance of the relevant utilities.
+ # Outputs user information
+ # ${1} is in the form of $fs_detected
+ # ${2} is in the form of $fs_name_exists
+ # ${3} is the name of the configuration variable
+ # ${4} is the user-friendly name for the configuration option
+ # ${5} name of the utility needed for the block device type
+ # ${6} is the name of the package that contains the program
+ # ${6} is **distribution-dependent**
+ if [ "${1}" != "0" ] && [ "${2}" = "1" ]
+ then
+ 66-env -t boot -r "${3}"=!yes boot@system
+ 66-yeller %g "${4} detected and enabled!" %n
+ elif [ "${1}" != "0" ] && [ "${2}" = "0" ]
+ then
+ 66-env -t boot -r "${3}"=!no boot@system
+ 66-yeller -W %y "${4} detected but cannot be enabled,\n because the ${5} program is not installed. Please install the ${6} \n package and run this script again!" %n
+ elif [ "${1}" = "0" ]
+ then
+ 66-env -t boot -r "${3}"=!no boot@system
+ 66-yeller %b "${4} not detected!" %n
+ fi
+
+}
+
+check_and_apply_conf_zpool() {
+ # Checks for the zfs pool import method if ZFS is enabled.
+ # Outputs user information
+ # ${1} is in the form of $fs_detected
+ # ${2} is in the form of $fs_name_exists
+ if [ "${1}" != "0" ] && [ "${2}" = "1" ]
+ then
+ 66-env -t boot -r "ZFS"=!yes boot@system
+ if [ -e /etc/zfs/zpool.cache ]
+ then
+ 66-env -t boot -r ZFS_IMPORT=!zpoolcache boot@system
+ 66-yeller %g "ZFS import method configured as zpoolcache." %n
+ else
+ 66-env -t boot -r ZFS_IMPORT=!scan boot@system
+ 66-yeller %g "ZFS import method configured as scan." %n
+ fi
+ fi
+
+}
+
+# devices_to_detect is a list of some device TYPEs we want to detect
+devices_to_detect="btrfs zfs_member crypto_LUKS linux_raid_member LVM2_member swap"
+
+# Use detect fs for all members of devices_to_detect we want
+for key in $devices_to_detect; do detect_fs "$key" ; done
+
+# dmraid supports multiple TYPEs of *-raid-member devices.
+# find them first and add the sum of the *_detected values to
+# dmraid_detected.
+
+# dmraid_TYPEs holds the device TYPEs dmraid handles
+dmraid_TYPEs="ddf_raid_member isw_raid_member lsi_mega_raid_member \
+via_raid_member silicon_medley_raid_member nvidia_raid_member \
+promise_fasttrack_raid_member hpt45x_raid_member hpt37x_raid_member \
+adaptec_raid_member jmicron_raid_member"
+
+for TYPE in $dmraid_TYPEs; do detect_fs "$TYPE" ; done
+
+# shellcheck disable=SC2154
+dmraid_detected=$((ddf_raid_member_detected+isw_raid_member_detected\
++lsi_mega_raid_member_detected+via_raid_member_detected\
++silicon_medley_raid_member_detected+nvidia_raid_member_detected\
++promise_fasttrack_raid_member_detected+hpt37x_raid_member_detecter\
++hpt45x_raid_member_detected+adaptec_raid_member_detected\
++jmicron_raid_member_detected))
+
+# swap can be detected by blkid if it is a partition or it can be a swapfile
+# declared in fstab
+detect_swapfile
+swap_detected=$((swap_detected+swapfile_detected))
+
+# Use detect_util for all utilities
+detect_util btrfs_util btrfs
+detect_util zfs_util zfs
+detect_util luks_util cryptsetup
+detect_util lvm_util lvchange
+detect_util dmraid_util dmraid
+detect_util swap_util swapon
+detect_util mdraid_util mdadm
+
+# Finally detect and apply the configuration
+# shellcheck disable=SC2154
+check_and_apply_conf "$btrfs_detected" "$btrfs_util_exists" BTRFS BTRFS btrfs "[btrfs_progs]"
+# shellcheck disable=SC2154
+check_and_apply_conf "$zfs_member_detected" "$zfs_util_exists" ZFS ZFS zfs "[zfs]"
+# shellcheck disable=SC2154
+check_and_apply_conf_zpool "$zfs_member_detected" "$zfs_util_exists" ZFS
+# shellcheck disable=SC2154
+check_and_apply_conf "$crypto_LUKS_detected" "$luks_util_exists" CRYPTTAB LUKS cryptsetup "[cryptsetup]"
+# shellcheck disable=SC2154
+check_and_apply_conf "$LVM2_member_detected" "$lvm_util_exists" LVM LVM lvchange "[lvm2]"
+# shellcheck disable=SC2154
+check_and_apply_conf "$dmraid_detected" "$dmraid_util_exists" DMRAID DMRAID dmraid "[dmraid]"
+# shellcheck disable=SC2154
+check_and_apply_conf "$swap_detected" "$swap_util_exists" SWAP SWAP swapon "[util-linux]"
+# shellcheck disable=SC2154
+check_and_apply_conf "$linux_raid_member_detected" "$mdraid_util_exists" MDRAID MDRAID mdadm "[mdadm]"
+
+
+66-yeller %g "Please re-enable the boot@system service
+for the changes to take effect by running (as root):
+'66-enable -F -t boot boot@system'" %n
diff --git a/srcpkgs/boot-66serv/files/runit b/srcpkgs/boot-66serv/files/runit
new file mode 100644
index 000000000000..1e6bc6872f78
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/runit
@@ -0,0 +1,35 @@
+[main]
+@type = classic
+@version = @VERSION@
+@description = "runit"
+@user = (root)
+
+[start]
+@build = custom
+@shebang = "/bin/sh"
+@execute = (
+exec 2>&1
+
+PATH=/usr/bin:/usr/sbin
+runlevel=66
+
+runsvchdir "${runlevel}"
+s6-mkdir -v -p /run/runit/runsvdir
+ln -s /etc/runit/runsvdir/current /run/runit/runsvdir/current
+s6-rmrf /var/service/current
+s6-rmrf /var/service/supervise
+
+exec s6-env -i PATH=$PATH \
+ runsvdir -P /run/runit/runsvdir/current
+ )
+
+[stop]
+@build = custom
+@shebang = "/bin/sh -c"
+@execute = (
+ sv force-stop /var/service/* &&
+ sv exit /var/service/* )
+
+[logger]
+@backup = 3
+@maxsize = 1000000
\ No newline at end of file
diff --git a/srcpkgs/boot-66serv/files/runit-wrapsv@ b/srcpkgs/boot-66serv/files/runit-wrapsv@
new file mode 100644
index 000000000000..90349947127b
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/runit-wrapsv@
@@ -0,0 +1,9 @@
+# The service takes the runit service name as @I - e.g. runit-wrapsv@cupsd
+[main]
+@type = classic
+@version = @VERSION@
+@description = "wrapper for @I runit service"
+@user = ( root )
+
+[start]
+@execute = ( /etc/sv/@I/run )
diff --git a/srcpkgs/boot-66serv/files/switch-initutils b/srcpkgs/boot-66serv/files/switch-initutils
new file mode 100755
index 000000000000..9876234ddaa3
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/switch-initutils
@@ -0,0 +1,13 @@
+# This core service checks for /usr/bin/{reboot,poweroff,halt,shutdown}
+# and if they are part of 66 it deletes them and moves the runit
+# utilities in their place. It runs by default. There is a similar
+# oneshot service for 66 that does the opposite and should be enabled.
+# The script make sure that the user has the proper utilities for the
+# init system they are currently running.
+
+for i in reboot poweroff halt shutdown; do
+ if test -e /usr/bin/${i}.runit; then
+ rm /usr/bin/${i}
+ mv /usr/bin/${i}.runit /usr/bin/${i}
+ fi
+ done
diff --git a/srcpkgs/boot-66serv/files/switch-initutils-66 b/srcpkgs/boot-66serv/files/switch-initutils-66
new file mode 100644
index 000000000000..f622a736f7a8
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/switch-initutils-66
@@ -0,0 +1,31 @@
+
+# This oneshot service checks for /usr/bin/{reboot,poweroff,halt,shutdown}
+# and if they are part of runit-void it renames them and copies the 66
+# utilities in their place. It must be enabled, especially if one
+# changes between the two init systems. There is a similar script for
+# runit core-services that does the opposite and runs by default with runit.
+# The service makes sure that the user has the proper utilities for the
+# init system they are currently running.
+
+[main]
+@type = oneshot
+@version = @VERSION@
+@description = "Switch initutils"
+@user = ( root )
+
+[start]
+@build = custom
+@shebang = "/bin/sh -c"
+@execute = (
+
+poweroff_util=$(readlink -f /usr/bin/poweroff)
+
+if grep -q "s6-svscan" /proc/1/cmdline && [ $(pgrep -u root 66-shutdownd) ]; then
+ if [ "$poweroff_util" != /usr/bin/poweroff ]; then
+ for i in reboot poweroff halt shutdown; do
+ mv /usr/bin/${i} /usr/bin/${i}.runit
+ cp /etc/66/${i} /usr/bin/${i}
+ done
+ fi
+fi
+)
diff --git a/srcpkgs/boot-66serv/files/sysctl.sh b/srcpkgs/boot-66serv/files/sysctl.sh
new file mode 100755
index 000000000000..3a7c6f85b898
--- /dev/null
+++ b/srcpkgs/boot-66serv/files/sysctl.sh
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Copy of the 08-syctl.sh script of the void-runit project,
+# that is in the public domain.
+# Latest version of the upstream script is in:
+# https://github.com/void-linux/void-runit/blob/master/core-services/08-sysctl.sh
+# Licence information is available in the README.md:
+# https://github.com/void-linux/void-runit#readme
+
+if [ -x /sbin/sysctl -o -x /bin/sysctl ]; then
+ mkdir -p /run/vsysctl.d
+ for i in /run/sysctl.d/*.conf \
+ /etc/sysctl.d/*.conf \
+ /usr/local/lib/sysctl.d/*.conf \
+ /usr/lib/sysctl.d/*.conf; do
+
+ if [ -e "$i" ] && [ ! -e "/run/vsysctl.d/${i##*/}" ]; then
+ ln -s "$i" "/run/vsysctl.d/${i##*/}"
+ fi
+ done
+ for i in /run/vsysctl.d/*.conf; do
+ sysctl -p "$i"
+ done
+ rm -rf -- /run/vsysctl.d
+ sysctl -p /etc/sysctl.conf
+fi
diff --git a/srcpkgs/boot-66serv/patches/0001-service-system-devices-devices-first-pass-at-improvi.patch b/srcpkgs/boot-66serv/patches/0001-service-system-devices-devices-first-pass-at-improvi.patch
new file mode 100644
index 000000000000..cfc3239d9f2e
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0001-service-system-devices-devices-first-pass-at-improvi.patch
@@ -0,0 +1,157 @@
+From fd57e39ac0214f0009998329f81abf843f3efb82 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Tue, 17 May 2022 17:18:33 +0300
+Subject: [PATCH 01/23] service/system/devices/devices-*: first pass at
+ improving user warnings and general behavior. More information on the
+ [PR](https://framagit.org/pkg/obmods/boot-66serv/-/merge_requests/16)
+
+---
+ .../service/system/devices/devices-btrfs | 18 +++++++-------
+ .../service/system/devices/devices-crypttab | 17 ++++++++-----
+ .../boot@/service/system/devices/devices-lvm | 24 ++++++++-----------
+ .../boot@/service/system/devices/devices-zfs | 15 +++++++-----
+ 4 files changed, 40 insertions(+), 34 deletions(-)
+
+diff --git a/module/boot@/service/system/devices/devices-btrfs b/module/boot@/service/system/devices/devices-btrfs
+index dc46638..987d29c 100644
+--- a/module/boot@/service/system/devices/devices-btrfs
++++ b/module/boot@/service/system/devices/devices-btrfs
+@@ -1,7 +1,7 @@
+ [main]
+ @type = oneshot
+ @version = @vers@
+-@description = "Active btrfs devices"
++@description = "Activate btrfs devices"
+ @user = ( root )
+ @depends = ( udevadm )
+ @options = ( !log )
+@@ -10,11 +10,13 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-btrfs -1 /dev/console starts... }
+- if -nt {
+-
+- if { 66-which -q btrfs }
+- btrfs device scan
+-
+- }
+- 66-yeller -fcdp devices-btrfs -1 /dev/console crashed!
++ ifelse { blkid --match-token=TYPE="btrfs" }
++ { ifelse -n { 66-which -q btrfs }
++ { if { 66-yeller -cdp device-btrfs -1 /dev/console No btrfs program available, check your configuration! } exit 0 }
++ if -nt {
++ btrfs device scan
++ }
++ 66-yeller -fcdp devices-btrfs -1 /dev/console crashed! }
++
++ 66-yeller -cdp device-btrfs -1 /dev/console no btrfs volumes available!
+ )
+diff --git a/module/boot@/service/system/devices/devices-crypttab b/module/boot@/service/system/devices/devices-crypttab
+index fd491ef..b1c327b 100644
+--- a/module/boot@/service/system/devices/devices-crypttab
++++ b/module/boot@/service/system/devices/devices-crypttab
+@@ -10,13 +10,15 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-crypttab -1 /dev/console starts... }
+- if -nt {
++ ifelse { blkid --match-token=TYPE="crypto_LUKS" }
+
+- execl-toc -e ${script_conf}
+- if { execl-cmdline -s { 66-olexec awk -f ${script_file} ${script_conf} } }
+-
+- foreground {
++ {
++ ifelse { execl-toc -X -e ${script_conf} }
++ { if -nt {
++ if { execl-cmdline -s { 66-olexec awk -f ${script_file} ${script_conf} } }
++ foreground {
+
++ if { blkid --match-token=TYPE="LVM2_member" }
+ if { 66-which -q vgchange }
+ if { 66-yeller -cdp devices-crypttab -1 /dev/console Activating LVM devices for dm-crypt... }
+ if -nt {
+@@ -26,7 +28,10 @@
+ 66-yeller -cdp devices-crypttab -1 /dev/console unable to activate LVM devices
+ }
+ }
+- 66-yeller -fcdp devices-crypttab -1 /dev/console crashed!
++ 66-yeller -fcdp devices-crypttab -1 /dev/console crashed! }
++ if { 66-yeller -cdp device-crypttab -1 /dev/console no ${script_conf} available, check your installation and configuration! } exit 0 }
++
++ 66-yeller -cdp device-crypttab -1 /dev/console no encrypted volumes available!
+ )
+
+ [environment]
+diff --git a/module/boot@/service/system/devices/devices-lvm b/module/boot@/service/system/devices/devices-lvm
+index df1429e..3a5068d 100644
+--- a/module/boot@/service/system/devices/devices-lvm
++++ b/module/boot@/service/system/devices/devices-lvm
+@@ -1,7 +1,7 @@
+ [main]
+ @type = oneshot
+ @version = @vers@
+-@description = "Active lvm devices"
++@description = "Activate lvm devices"
+ @user = ( root )
+ @depends = ( udevadm )
+ @options = ( !log )
+@@ -9,18 +9,14 @@
+ [start]
+ @execute =
+ (
+- if { 66-yeller -cdp devices-lvm -1 /dev/console starts... }
+- if -nt {
+-
+- if { 66-which -q lvmetad }
+- execl-toc -d /run/lvm
+- if { lvmetad -p /run/lvm/lvmetad.pid }
+- if { 66-which -q vgchange }
+- foreground {
+- vgchange --sysinit -a ay
++if { 66-yeller -cdp devices-lvm -1 /dev/console starts... }
++ ifelse { blkid --match-token=TYPE="LVM2_member" }
++ { ifelse -n { 66-which -q vgchange }
++ { if { 66-yeller -cdp device-lvm -1 /dev/console No vgchange program available, check your configuration! } exit 0 }
++ if -nt {
++ vgchange --sysinit -a ay
+ }
+- pkill lvmetad
+-
+- }
+- 66-yeller -fcdp devices-lvm -1 /dev/console crashed!
++ 66-yeller -fcdp devices-lvm -1 /dev/console crashed! }
++
++ 66-yeller -cdp device-lvm -1 /dev/console no lvm volumes available!
+ )
+diff --git a/module/boot@/service/system/devices/devices-zfs b/module/boot@/service/system/devices/devices-zfs
+index c832647..fdfbe5f 100644
+--- a/module/boot@/service/system/devices/devices-zfs
++++ b/module/boot@/service/system/devices/devices-zfs
+@@ -10,14 +10,17 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-zfs -1 /dev/console starts... }
+- if -nt {
+-
+- if { 66-which -q zfs }
+- if { execl-cmdline -s { zfs mount ${mount_args} } }
++ ifelse { blkid --match-token=TYPE="zfs" }
++ { ifelse -n { 66-which -q zfs }
++ { if { 66-yeller -cdp device-zfs -1 /dev/console No zfs program available, check your configuration! } exit 0 }
++ if -nt {
++ if { execl-cmdline -s { zfs mount ${mount_args} } }
+ execl-cmdline -s { zfs share ${share_args} }
++ }
++ 66-yeller -fcdp devices-zfs -1 /dev/console crashed! }
++
++ 66-yeller -cdp device-zfs -1 /dev/console no zfs volumes available!!
+
+- }
+- 66-yeller -fcdp devices-zfs -1 /dev/console crashed!
+ )
+
+ [environment]
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0002-configure-configure-add-checks-to-make-the-process-m.patch b/srcpkgs/boot-66serv/patches/0002-configure-configure-add-checks-to-make-the-process-m.patch
new file mode 100644
index 000000000000..1becf7808ae8
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0002-configure-configure-add-checks-to-make-the-process-m.patch
@@ -0,0 +1,295 @@
+From cc9ac05ef06a8dcf871f950dd076ab536aa26a18 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 10 Jul 2022 17:12:03 +0300
+Subject: [PATCH 02/23] configure/configure: add checks to make the process
+ more robust
+
+- check for the existence of necessary keys
+- check if keys have correct values
+- check if btrfs, zfs, luks, dmraid etc volumes exist, the relevant
+configuration options are valid and the utilities needed are present
+- enable tests if CHECK_CONFIGURATION=yes.
+---
+ module/boot@/configure/configure | 230 ++++++++++++++++++++++++++++++-
+ 1 file changed, 224 insertions(+), 6 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index e6fed96..bcf2fad 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -10,19 +10,96 @@ export COLOR_ENABLED="${MOD_COLOR}"
+ service_dir="${MOD_MODULE_DIR}/service"
+ SV_REAL=
+
++## sv_boolean_list contain keys that take yes or no as values
+ sv_boolean_list="CRYPTTAB SETUPCONSOLE FSTAB SWAP LVM \
+-DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
++DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER MODULE_KERNEL \
+ MODULE_SYSTEM RANDOMSEED MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP CGROUPS \
+ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP"
+-
++## sv_container_list contained keys for options that are disabled in a container
+ sv_container_list="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID BTRFS \
+ ZFS UDEV UDEV_ADM SYSCTL FORCECHCK CGROUPS MODULE_SYSTEM RANDOMSEED MNT_NETFS"
++## sv_container_list is used by the check funtions and has the same contents as the
++## sv_container_list, minus UDEV_ADM
++sv_container_list_check="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID BTRFS \
++ZFS UDEV SYSCTL FORCECHCK CGROUPS MODULE_SYSTEM RANDOMSEED MNT_NETFS"
++## sv_extra_list_check is used by the check functions and contains keys that need
++## to be present but are not in the previous lists
++sv_extra_list_check="HOSTNAME TZ TTY KEYMAP FONT"
+
+ die(){
+- 66-yeller -f "${@}"
+- exit 111
++ fatal_error_message="$( printf '%s' "${@}" )"
++ 66-yeller -f "%r $fatal_error_message %n"
++ exit 111
++}
++
++warn() {
++ warn_message="$( printf '%s' "${@}" )"
++ 66-yeller -W "%y $warn_message %n"
++}
++
++emit_trace() {
++ trace_message="$( printf '%s' "${@}" )"
++ 66-yeller -t "%b $trace_message %n"
++}
++
++## Detect functions. They use blkid(8) from util-linux to detect volume types
++## and 66-which to detect the needed utilities for the volume types
++
++detect_fs() {
++ # Uses blkid to detect partition TYPEs. The result is the number
++ # of detected partitions.
++ export "${1}"_detected="$(blkid -c /dev/null --match-token=TYPE="${1}" | wc -l )"
++}
++detect_swapfile() {
++ # Finds swap references in /etc/fstab.
++ swapfile_detected="$(awk '!/^(#)/' /etc/fstab | awk '$3=="swap" ' | wc -l )"
++ export swapfile_detected
+ }
++detect_util() {
++ # Uses 66-which to determine if a utility exists.
++ # Output is $fs_util_exitst=0 (or 1)
++ # ${1} is the variable for the utility, in the form of "$fs_util"
++ # ${2} is the name of the executable
++ export "${1}"_exists="$(66-which "${2}" | wc -l)"
++}
++
++detect_fs btrfs
++detect_fs zfs
++detect_fs crypto_LUKS
++detect_fs LVM2_member
++# dmraid supports multiple TYPEs of *-raid-member devices.
++# find them first and add the sum of the *_detected values to
++# dmraid_detected.
++detect_fs ddf_raid_member
++detect_fs isw_raid_member
++detect_fs lsi_mega_raid_member
++detect_fs via_raid_member
++detect_fs silicon_medley_raid_member
++detect_fs nvidia_raid_member
++detect_fs promise_fasttrack_raid_member
++detect_fs hpt45x_raid_member
++detect_fs hpt37x_raid_member
++detect_fs adaptec_raid_member
++detect_fs jmicron_raid_member
++dmraid_detected=$((ddf_raid_member_detected+isw_raid_member_detected\
+++lsi_mega_raid_member_detected+via_raid_member_detected\
+++silicon_medley_raid_member_detected+nvidia_raid_member_detected\
+++promise_fasttrack_raid_member_detected+hpt37x_raid_member_detecter\
+++hpt45x_raid_member_detected+adaptec_raid_member_detected\
+++jmicron_raid_member_detected))
++# swap can be detected by blkid if it is a partition or it can be a swapfile
++# declared in fstab
++detect_fs swap
++detect_swapfile
++swap_detected=$((swap_detected+swapfile_detected))
++detect_util btrfs_util btrfs
++detect_util zfs_util zfs
++detect_util luks_util cryptsetup
++detect_util lvm_util lvchange
++detect_util dmraid_util dmraid
++detect_util swap_util swapon
+
++## Check functions.
+ check_empty_var(){
+ name="${1}" var_value="${2}"
+ if [ -z "${var_value}" ]; then
+@@ -30,7 +107,129 @@ check_empty_var(){
+ fi
+ }
+
++check_var_existance() {
++ # ${1} is a list with key names
++ for key in ${1}
++ do
++ eval key_value="\$${key}"
++ key_value="$key_value"
++ if [ -z "$key_value" ]; then
++ die "$key is not present or misconfigured. The process cannot continue,
++ please fix yout configuration and try again!"
++ fi
++ done
++}
++
++check_boolean_var_values() {
++ # ${1} is a list of key names
++ # ${2} and ${2} are valid values for these keys
++ for key in ${1}
++ do
++ eval key_value="\$${key}"
++ key_value="$key_value"
++ if [ "$key_value" = "${2}" ]; then
++ emit_trace "$key has a correct value of [$key_value]"
++ elif [ "$key_value" = "${3}" ]; then
++ emit_trace "$key has a correct value of [$key_value]"
++ else
++ die " [${key_value}] is not a valid value for ${key}. The process cannot continue,
++please fix your configuration and try again!"
++ fi
++ done
++}
++
++check_volume_sanity() {
++ # ${1} is the configuration key for the volume type
++ # ${2} is the value of the relevant detect_fs function
++ # ${3} is the value of the relevant detect_util_exists function
++ # ${4} is the name of the relevant utility
++ # Check if volumes of a certain type (${2}) exist, if the utility
++ # needed for the type exists and if that volume type is enabled
++ # in the environment file.
++ eval key_value="\$${1}"
++ key_value="$key_value"
++ [ "$key_value" = "yes" ] && [ "${2}" -gt 0 ] && [ "${3}" -eq 1 ] && \
++ emit_trace "${1} is enabled and configured correctly"
++ [ "${1}" = "yes" ] && [ "${2}" -eq 0 ] && warn "${1} is set to
++ [ $key_value ] but there are no relevant volumes present. This is\
++ a non-fatal warning, you may want to check your configuration"
++ [ "$key_value" = "yes" ] && [ "${2}" -gt 0 ] && [ "${3}" -eq 0 ] && \
++ die "${1} is set to [$key_value], relevant volumes exist but [${4}] does not exist. \
++The process cannot continue, please check your configuration and try again"
++ [ "$key_value" = "no" ] && [ "${2}" -gt 0 ] && \
++ warn "${1} is set to [$key_value], but relevant volumes exist. \
++This is a non-fatal warning but you should check your configuration!"
++}
++
++check_tty_number() {
++ # TTY should between 1 and 11. Warn if it is 0, abort with an error
++ # if it is outside of this range.
++ key_value="$TTY"
++ if [ "${key_value}" -gt 11 ]; then
++ die "TTY should have a value between 1 and 11. The current value\
++ of [$key_value] is not valid. The process cannot continue, please fix\
++ your configuration and try again"
++ elif [ "$key_value" -lt 0 ]; then
++ die "TTY should have a value between 1 and 11. The process cannot\
++ continue, please fix your configuration and try again"
++ elif [ "$key_value" -eq 0 ]; then
++ warn "TTY has a value of [0]. That is valid, but means that the\
++ system will not have a configured tty."
++ else
++ emit_trace "TTY has a valid value. [$key_value] ttys will be\
++ configured. "
++ fi
++}
++
++check_tz() {
++ # TZ should have a timezone that exists as a value
++ execl-toc -n -X -e /usr/share/zoneinfo/"$TZ" && die "[ ${TZ} ] is not \
++a valid value for TZ. The process cannot continue, please check your configuration and try again."
++ execl-toc -X -e /usr/share/zoneinfo/"$TZ" && emit_trace "TZ is correctly configured, with a\
++ value of [${TZ}]."
++}
++
++check_keymap() {
++ # KEYMAP value is checked against a generated list of keymaps in the system
++ keymap_list=""
++ keymap_list="$(find /usr/share/kbd/keymaps/ -type f -iname "*.map.gz" -printf "%f " | sed 's|.map.gz||g')"
++ keymap_exists=
++ for keymap in $keymap_list;
++ do
++ [ "$keymap" = "${KEYMAP}" ] && export keymap_exists=1 ;
++ done
++ if [ "$keymap_exists" = "1" ] ;
++ then
++ emit_trace "KEYMAP is correctly configured with a value of [${KEYMAP}]."
++ else
++ die "[${KEYMAP}] is not a valid value for KEYMAP. The process cannot continue,\
++ please check your configuration and try again."
++ fi
++}
++check_consolefont() {
++ # FONT value is checked against a generated list of console fonts that
++ # exist in the system. Currently psf and psfu types are listed, compressed
++ # with gz. We will see if that is enough.
++ console_fontlist=""
++ console_fontlist="$(find /usr/share/kbd/consolefonts/ -type f -iname "*.psf.gz" -printf "%f " | sed 's|.psf.gz||g')"
++ console_fontlist="$console_fontlist $(find /usr/share/kbd/consolefonts/ -type f -iname "*.psfu.gz" -printf "%f " | sed 's|.psfu.gz||g')"
++ font_exists=
++ for font in $console_fontlist;
++ do
++ [ "$font" = "${FONT}" ] && export font_exists=1 ;
++ done
++ if [ "$font_exists" = "1" ] ;
++ then
++ emit_trace "FONT is correctly configured with a value of [${FONT}]."
++ else
++ die " [${FONT}] is not a valid value for FONT. The process cannot continue,\
++ please check your configuration and try again."
++ fi
++}
++
+ retrieve_sv_name(){
++ # Matches the configuration key of the environment section/file to the name
++ # of the corresponding service frontend.
+ sv=${1}
+ case ${sv} in
+ HARDWARECLOCK) SV_REAL="system-hwclock" ;;
+@@ -46,7 +245,6 @@ retrieve_sv_name(){
+ SYSCTL) SV_REAL="system-sysctl" ;;
+ FORCECHCK) SV_REAL="system-fsck" ;;
+ LOCAL) SV_REAL="local-rc" ;;
+- TMPFILE) SV_REAL="local-tmpfiles" ;;
+ MODULE_KERNEL) SV_REAL="modules-kernel" ;;
+ MODULE_SYSTEM) SV_REAL="modules-system" ;;
+ RANDOMSEED) SV_REAL="system-random" ;;
+@@ -127,6 +325,26 @@ sv_comment_real() {
+ fi
+ }
+
++
++# Check the configuration if CHECK_CONFIGURATION is set to "yes" in the
++# environment section/file
++if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
++ check_var_existance "$sv_boolean_list"
++ check_var_existance "$sv_container_list_check"
++ check_var_existance "$sv_extra_list_check"
++ check_boolean_var_values "$sv_boolean_list" "yes" "no"
++ check_tty_number
++ check_tz
++ check_keymap
++ check_consolefont
++ check_volume_sanity BTRFS "$btrfs_detected" "$btrfs_util_exists" btrfs
++ check_volume_sanity ZFS "$zfs_detected" "$zfs_util_exists" zfs
++ check_volume_sanity CRYPTTAB "$crypto_LUKS_detected" "$luks_util_exists" cryptsetup
++ check_volume_sanity LVM "$LVM2_member_detected" "$lvm_util_exists" lvchange
++ check_volume_sanity DMRAID "$dmraid_detected" "$dmraid_util_exists" dmraid
++ check_volume_sanity SWAP "$swap_detected" "$swap_util_exists" swapon
++fi
++
+ 66-yeller %benable%n service: "tty-earlier@tty12"
+ touch "${service_dir}/tty-earlier@tty12" || die "unable to create ${service_dir}/tty-earlier@tty12"
+
+@@ -210,4 +428,4 @@ else
+ done
+ fi
+
+-66-yeller "%bsuccessfully%n configured"
++66-yeller "%bsuccessfully%n configured"
+\ No newline at end of file
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0003-service-system-devices-devices-add-c-dev-null-to-the.patch b/srcpkgs/boot-66serv/patches/0003-service-system-devices-devices-add-c-dev-null-to-the.patch
new file mode 100644
index 000000000000..fdbbbc59fa73
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0003-service-system-devices-devices-add-c-dev-null-to-the.patch
@@ -0,0 +1,68 @@
+From b600e122710af5dc92e74988b68aa7583d922487 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 10 Jul 2022 17:13:45 +0300
+Subject: [PATCH 03/23] service/system/devices/devices-* : add -c /dev/null to
+ the blkid command in order to avoid using a cachefile for the detection.
+
+---
+ module/boot@/service/system/devices/devices-btrfs | 2 +-
+ module/boot@/service/system/devices/devices-crypttab | 2 +-
+ module/boot@/service/system/devices/devices-lvm | 2 +-
+ module/boot@/service/system/devices/devices-zfs | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/module/boot@/service/system/devices/devices-btrfs b/module/boot@/service/system/devices/devices-btrfs
+index 987d29c..3e5fcec 100644
+--- a/module/boot@/service/system/devices/devices-btrfs
++++ b/module/boot@/service/system/devices/devices-btrfs
+@@ -10,7 +10,7 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-btrfs -1 /dev/console starts... }
+- ifelse { blkid --match-token=TYPE="btrfs" }
++ ifelse { blkid -c /dev/null --match-token=TYPE="btrfs" }
+ { ifelse -n { 66-which -q btrfs }
+ { if { 66-yeller -cdp device-btrfs -1 /dev/console No btrfs program available, check your configuration! } exit 0 }
+ if -nt {
+diff --git a/module/boot@/service/system/devices/devices-crypttab b/module/boot@/service/system/devices/devices-crypttab
+index b1c327b..07a0e36 100644
+--- a/module/boot@/service/system/devices/devices-crypttab
++++ b/module/boot@/service/system/devices/devices-crypttab
+@@ -10,7 +10,7 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-crypttab -1 /dev/console starts... }
+- ifelse { blkid --match-token=TYPE="crypto_LUKS" }
++ ifelse { blkid -c /dev/null --match-token=TYPE="crypto_LUKS" }
+
+ {
+ ifelse { execl-toc -X -e ${script_conf} }
+diff --git a/module/boot@/service/system/devices/devices-lvm b/module/boot@/service/system/devices/devices-lvm
+index 3a5068d..0da7390 100644
+--- a/module/boot@/service/system/devices/devices-lvm
++++ b/module/boot@/service/system/devices/devices-lvm
+@@ -10,7 +10,7 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-lvm -1 /dev/console starts... }
+- ifelse { blkid --match-token=TYPE="LVM2_member" }
++ ifelse { blkid -c /dev/null --match-token=TYPE="LVM2_member" }
+ { ifelse -n { 66-which -q vgchange }
+ { if { 66-yeller -cdp device-lvm -1 /dev/console No vgchange program available, check your configuration! } exit 0 }
+ if -nt {
+diff --git a/module/boot@/service/system/devices/devices-zfs b/module/boot@/service/system/devices/devices-zfs
+index fdfbe5f..69c6b34 100644
+--- a/module/boot@/service/system/devices/devices-zfs
++++ b/module/boot@/service/system/devices/devices-zfs
+@@ -10,7 +10,7 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-zfs -1 /dev/console starts... }
+- ifelse { blkid --match-token=TYPE="zfs" }
++ ifelse { blkid -c /dev/null --match-token=TYPE="zfs" }
+ { ifelse -n { 66-which -q zfs }
+ { if { 66-yeller -cdp device-zfs -1 /dev/console No zfs program available, check your configuration! } exit 0 }
+ if -nt {
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0004-module-boot-configure-configure-add-back-tmpfile-con.patch b/srcpkgs/boot-66serv/patches/0004-module-boot-configure-configure-add-back-tmpfile-con.patch
new file mode 100644
index 000000000000..89e053009642
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0004-module-boot-configure-configure-add-back-tmpfile-con.patch
@@ -0,0 +1,34 @@
+From 2c14f843c9de0405b5e6e959afc754c5c1b28842 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Wed, 28 Sep 2022 20:26:04 +0300
+Subject: [PATCH 04/23] module/boot@/configure/configure: add back tmpfile
+ configuration.
+
+---
+ module/boot@/configure/configure | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index bcf2fad..2cdef3f 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -12,7 +12,7 @@ SV_REAL=
+
+ ## sv_boolean_list contain keys that take yes or no as values
+ sv_boolean_list="CRYPTTAB SETUPCONSOLE FSTAB SWAP LVM \
+-DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER MODULE_KERNEL \
++DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
+ MODULE_SYSTEM RANDOMSEED MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP CGROUPS \
+ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP"
+ ## sv_container_list contained keys for options that are disabled in a container
+@@ -245,6 +245,7 @@ retrieve_sv_name(){
+ SYSCTL) SV_REAL="system-sysctl" ;;
+ FORCECHCK) SV_REAL="system-fsck" ;;
+ LOCAL) SV_REAL="local-rc" ;;
++ TMPFILE) SV_REAL="local-tmpfiles" ;;
+ MODULE_KERNEL) SV_REAL="modules-kernel" ;;
+ MODULE_SYSTEM) SV_REAL="modules-system" ;;
+ RANDOMSEED) SV_REAL="system-random" ;;
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0005-configure-configure-fix-zfs-detection.patch b/srcpkgs/boot-66serv/patches/0005-configure-configure-fix-zfs-detection.patch
new file mode 100644
index 000000000000..0d5bdd28bf33
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0005-configure-configure-fix-zfs-detection.patch
@@ -0,0 +1,39 @@
+From be5ea919956fe5e5a1913d8fd98c58577ae9ade6 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Wed, 28 Sep 2022 20:32:21 +0300
+Subject: [PATCH 05/23] configure/configure: fix zfs detection.
+
+---
+ module/boot@/configure/configure | 2 +-
+ module/boot@/service/system/devices/devices-zfs | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index 2cdef3f..eca4903 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -64,7 +64,7 @@ detect_util() {
+ }
+
+ detect_fs btrfs
+-detect_fs zfs
++detect_fs zfs_member
+ detect_fs crypto_LUKS
+ detect_fs LVM2_member
+ # dmraid supports multiple TYPEs of *-raid-member devices.
+diff --git a/module/boot@/service/system/devices/devices-zfs b/module/boot@/service/system/devices/devices-zfs
+index 69c6b34..8968b04 100644
+--- a/module/boot@/service/system/devices/devices-zfs
++++ b/module/boot@/service/system/devices/devices-zfs
+@@ -10,7 +10,7 @@
+ @execute =
+ (
+ if { 66-yeller -cdp devices-zfs -1 /dev/console starts... }
+- ifelse { blkid -c /dev/null --match-token=TYPE="zfs" }
++ ifelse { blkid -c /dev/null --match-token=TYPE="zfs_member" }
+ { ifelse -n { 66-which -q zfs }
+ { if { 66-yeller -cdp device-zfs -1 /dev/console No zfs program available, check your configuration! } exit 0 }
+ if -nt {
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0006-devices-devices-dmraid-first-pass-at-making-the-serv.patch b/srcpkgs/boot-66serv/patches/0006-devices-devices-dmraid-first-pass-at-making-the-serv.patch
new file mode 100644
index 000000000000..252ccb92e7d8
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0006-devices-devices-dmraid-first-pass-at-making-the-serv.patch
@@ -0,0 +1,41 @@
+From e8c012d02d2ac37648420ad43eb8b44fdd071b03 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Wed, 28 Sep 2022 21:54:56 +0300
+Subject: [PATCH 06/23] devices/devices-dmraid: first pass at making the
+ service more robust.
+
+- make the check for the utility not fatal - exist with a warning
+- make the dmraid invocation more verbose (it not easy to add the same
+check as in other services)
+- make the crash message a warning.
+---
+ .../boot@/service/system/devices/devices-dmraid | 15 +++++++--------
+ 1 file changed, 7 insertions(+), 8 deletions(-)
+
+diff --git a/module/boot@/service/system/devices/devices-dmraid b/module/boot@/service/system/devices/devices-dmraid
+index f1408ad..699fc5f 100644
+--- a/module/boot@/service/system/devices/devices-dmraid
++++ b/module/boot@/service/system/devices/devices-dmraid
+@@ -9,12 +9,11 @@
+ [start]
+ @execute =
+ (
+- if { 66-yeller -cdp devices-dmraid -1 /dev/console starts... }
+- if -nt {
+-
+- if { 66-which -q dmraid }
+- dmraid -i -ay
+-
+- }
+- 66-yeller -fcdp devices-dmraid -1 /dev/console crashed!
++ if { 66-yeller -cdp devices-dmraid -1 /dev/console starts... }
++ ifelse -n { 66-which -q dmraid }
++ { if { 66-yeller -cdp device-dmraid -1 /dev/console No dmraid program available, check your configuration! } exit 0 }
++ if -nt {
++ dmraid -vv -i -ay
++ }
++ 66-yeller -Wcdp devices-dmraid -1 /dev/console crached - no raid volumes found!
+ )
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0007-devices-devices-mdraid-first-pass-at-adding-mdraid-s.patch b/srcpkgs/boot-66serv/patches/0007-devices-devices-mdraid-first-pass-at-adding-mdraid-s.patch
new file mode 100644
index 000000000000..e0a73a91765d
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0007-devices-devices-mdraid-first-pass-at-adding-mdraid-s.patch
@@ -0,0 +1,83 @@
+From d95f82e086a8b85c003b67c2d1c91740fc48c0ab Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Wed, 28 Sep 2022 22:15:50 +0300
+Subject: [PATCH 07/23] devices/devices-mdraid: first pass at adding mdraid
+ support. - add devices-mdraid frontend service file - add devices-mdraid in
+ the @depends array of devices-crypttab, devices-lvm and in the @contents
+ array of system-devices.
+
+---
+ .../service/system/devices/devices-crypttab | 2 +-
+ .../boot@/service/system/devices/devices-lvm | 2 +-
+ .../service/system/devices/devices-mdraid | 22 +++++++++++++++++++
+ module/boot@/service/system/system-Devices | 1 +
+ 4 files changed, 25 insertions(+), 2 deletions(-)
+ create mode 100644 module/boot@/service/system/devices/devices-mdraid
+
+diff --git a/module/boot@/service/system/devices/devices-crypttab b/module/boot@/service/system/devices/devices-crypttab
+index 07a0e36..68e882c 100644
+--- a/module/boot@/service/system/devices/devices-crypttab
++++ b/module/boot@/service/system/devices/devices-crypttab
+@@ -4,7 +4,7 @@
+ @description = "Activate encrypted devices"
+ @user = ( root )
+ @options = ( !log )
+-@depends = ( udevadm devices-dmraid devices-lvm )
++@depends = ( udevadm devices-dmraid devices-lvm devices-mdraid )
+
+ [start]
+ @execute =
+diff --git a/module/boot@/service/system/devices/devices-lvm b/module/boot@/service/system/devices/devices-lvm
+index 0da7390..ac75959 100644
+--- a/module/boot@/service/system/devices/devices-lvm
++++ b/module/boot@/service/system/devices/devices-lvm
+@@ -3,7 +3,7 @@
+ @version = @vers@
+ @description = "Activate lvm devices"
+ @user = ( root )
+-@depends = ( udevadm )
++@depends = ( udevadm devices-dmraid devices-mdraid )
+ @options = ( !log )
+
+ [start]
+diff --git a/module/boot@/service/system/devices/devices-mdraid b/module/boot@/service/system/devices/devices-mdraid
+new file mode 100644
+index 0000000..d331c52
+--- /dev/null
++++ b/module/boot@/service/system/devices/devices-mdraid
+@@ -0,0 +1,22 @@
++[main]
++@type = oneshot
++@version = @vers@
++@description = "Activate software raid devices"
++@user = ( root )
++@depends = ( udevadm )
++@options = ( !log )
++
++[start]
++@execute =
++(
++ if { 66-yeller -cdp devices-mdraid -1 /dev/console starts... }
++ ifelse { blkid -c /dev/null --match-token=TYPE="linux_raid_member" }
++ { ifelse -n { 66-which -q mdadm }
++ { if { 66-yeller -cdp device-mdraid -1 /dev/console No mdadm program available, check your configuration! } exit 0 }
++ if -nt {
++ mdadm -As
++ }
++ 66-yeller -fcdp devices-mdraid -1 /dev/console crashed! }
++
++ 66-yeller -cdp device-mdraid -1 /dev/console no mdraid volumes available!
++)
+diff --git a/module/boot@/service/system/system-Devices b/module/boot@/service/system/system-Devices
+index de8e5e8..de10e56 100644
+--- a/module/boot@/service/system/system-Devices
++++ b/module/boot@/service/system/system-Devices
+@@ -10,4 +10,5 @@ devices-btrfs
+ devices-crypttab
+ devices-lvm
+ devices-zfs
++devices-mdraid
+ )
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0008-doc-boot-.md-update-configuration-to-reflect-changes.patch b/srcpkgs/boot-66serv/patches/0008-doc-boot-.md-update-configuration-to-reflect-changes.patch
new file mode 100644
index 000000000000..4df67d21093e
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0008-doc-boot-.md-update-configuration-to-reflect-changes.patch
@@ -0,0 +1,71 @@
+From 6d13228b4128900cb4c1ad00c67e2719616deae3 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Thu, 29 Sep 2022 19:48:32 +0300
+Subject: [PATCH 08/23] doc/boot@.md: update configuration to reflect changes
+
+---
+ doc/boot@.md | 22 ++++++++++++++++++----
+ 1 file changed, 18 insertions(+), 4 deletions(-)
+
+diff --git a/doc/boot@.md b/doc/boot@.md
+index 43f6480..02117bb 100644
+--- a/doc/boot@.md
++++ b/doc/boot@.md
+@@ -88,25 +88,32 @@ Two different kinds of variables are used:
+
+ - **LVM**:
+ - type: boolean.
+- - description: uses the `lvmetad` and `vgchange` program to activate LVM partitions. If these programs is not installed on your system, the boot process **fail** even if the enable process finish successfully.
++ - description: uses the `vgchange` program to activate LVM partitions and `cryptsetup` to open luks volumes in them. If the programs are not installed in the system, or if lvm devices are not discovered, an warning is emmited.
+
+ - **DMRAID**:
+ - type: boolean.
+- - description: uses the `dmraid` program to activate RAID partitions. If the program is not installed on your system, the boot process **fail** even if the enable process finish successfully.
++ - description: uses the `dmraid` program to activate RAID devices. If the program is not installed in the system, or if dmraid devices are not discovered, a warning is emmited.
++
++- **MDRAID**:
++ - type: boolean.
++ - description: uses the `mdadm` program to activate software raid (mdraid) devices. If the program is not installed in the system, or if mdraid devices are not discovered, a warning is emmited.
+
+ - **BTRFS**:
+ - type: boolean.
+- - description: uses the `btrfs` program to activate BTRFS partitions. If the program is not installed on your system, the boot process **fail** even if the enable process finish successfully.
++ - description: uses the `btrfs` program to activate BTRFS partitions. If the program is not installed in the system, or if btrfs devices are not discovered, a warning is emmited.
+
+ - **ZFS**:
+ - type: boolean.
+- - description: uses the `zfs` program to mount ZFS partitions. If the program is not installed on your system, the boot process **fail** even if the enable process finish successfully.
++ - description: uses the `zfs` program to mount ZFS partitions. If the program is not installed in the system, or if zfs devices are not discovered, a warning is emmited.
+
+ - **ZFS_IMPORT**:
+ - type: string.
+ - valid value: scan or zpoolcache.
+ - description: select the import method to use to detect the ZFS devices. This variable works in conjunction with the `ZFS` variable. In case the `ZFS` variable is set to no or commented, the `ZFS_IMPORT` variable has no effect.
+
++*LVM, DMRAID, MDRAID, BTRFS and ZFS rely on the `blkid` program from `util-linux` for device descovery.*
++
++
+ - **SETUPCONSOLE**:
+ - type: boolean.
+ - description: set it to no if you don't want to configure the console. In this case the `KEYMAP,FONT`, `FONT_MAP`, `FONT_UNIMAP` variable has no effect.
+@@ -156,6 +163,8 @@ Two different kinds of variables are used:
+ - type: boolean.
+ - description: use the file `/etc/crypttab` to decrypt an encrypted device. The file `/etc/crypttab` ***must*** exist on your system.
+
++*CRYPTTAB relies on the `blkid` program from `util-linux` for device descovery.*
++
+ - **FIREWALL**:
+ - type: string.
+ - valid value: iptables,ip6tables,nftables,ebtables,arptables.
+@@ -212,3 +221,8 @@ Two different kinds of variables are used:
+ - **POPULATE_TMP**:
+ - type: boolean
+ - description: create the `/tmp/.X11-unix` and `/tmp/.ICE-unix` directories.
++
++- **CHECK_CONFIGURATION**:
++ - type: boolean
++ - description: run configuration checks when enabling the boot@ service
++
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0009-configure-configure-add-support-for-mdraid-add-some-.patch b/srcpkgs/boot-66serv/patches/0009-configure-configure-add-support-for-mdraid-add-some-.patch
new file mode 100644
index 000000000000..d8909b459d74
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0009-configure-configure-add-support-for-mdraid-add-some-.patch
@@ -0,0 +1,95 @@
+From 5ab2369393778db76a5d5e8aab439dc86af9f095 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Thu, 29 Sep 2022 19:49:14 +0300
+Subject: [PATCH 09/23] configure/configure: add support for mdraid, add some
+ comments.
+
+---
+ module/boot@/configure/configure | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index eca4903..bdbccf9 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -16,28 +16,35 @@ DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
+ MODULE_SYSTEM RANDOMSEED MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP CGROUPS \
+ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP"
+ ## sv_container_list contained keys for options that are disabled in a container
+-sv_container_list="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID BTRFS \
++sv_container_list="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID MDRAID BTRFS \
+ ZFS UDEV UDEV_ADM SYSCTL FORCECHCK CGROUPS MODULE_SYSTEM RANDOMSEED MNT_NETFS"
+ ## sv_container_list is used by the check funtions and has the same contents as the
+ ## sv_container_list, minus UDEV_ADM
+-sv_container_list_check="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID BTRFS \
++sv_container_list_check="HARDWARECLOCK SETUPCONSOLE CRYPTTAB SWAP LVM DMRAID MDRAID BTRFS \
+ ZFS UDEV SYSCTL FORCECHCK CGROUPS MODULE_SYSTEM RANDOMSEED MNT_NETFS"
+ ## sv_extra_list_check is used by the check functions and contains keys that need
+ ## to be present but are not in the previous lists
+ sv_extra_list_check="HOSTNAME TZ TTY KEYMAP FONT"
+
++## Message functions. They use 66-yeller to provide three different levels of
++## messages for the script.
++
+ die(){
++ # Prints a fatal error message, in red color and exits the script.
+ fatal_error_message="$( printf '%s' "${@}" )"
+ 66-yeller -f "%r $fatal_error_message %n"
+ exit 111
+ }
+
+ warn() {
++ # Print a warning message, non-fatal, always visible in yellow color.
+ warn_message="$( printf '%s' "${@}" )"
+ 66-yeller -W "%y $warn_message %n"
+ }
+
+ emit_trace() {
++ # Prints a tracing message in red, visible only when the 66-enable is
++ # invoced with a verbosity (-v) level of 3 or above.
+ trace_message="$( printf '%s' "${@}" )"
+ 66-yeller -t "%b $trace_message %n"
+ }
+@@ -67,6 +74,7 @@ detect_fs btrfs
+ detect_fs zfs_member
+ detect_fs crypto_LUKS
+ detect_fs LVM2_member
++detect_fs linux_raid_member
+ # dmraid supports multiple TYPEs of *-raid-member devices.
+ # find them first and add the sum of the *_detected values to
+ # dmraid_detected.
+@@ -98,6 +106,7 @@ detect_util luks_util cryptsetup
+ detect_util lvm_util lvchange
+ detect_util dmraid_util dmraid
+ detect_util swap_util swapon
++detect_util mdraid_util mdadm
+
+ ## Check functions.
+ check_empty_var(){
+@@ -239,6 +248,7 @@ retrieve_sv_name(){
+ SWAP) SV_REAL="mount-swap" ;;
+ LVM) SV_REAL="devices-lvm" ;;
+ DMRAID) SV_REAL="devices-dmraid" ;;
++ MDRAID) SV_REAL="devices-mdraid" ;;
+ BTRFS) SV_REAL="devices-btrfs" ;;
+ ZFS) SV_REAL="devices-zfs" ;;
+ UDEV) SV_REAL="udevd" ;;
+@@ -344,6 +354,7 @@ if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
+ check_volume_sanity LVM "$LVM2_member_detected" "$lvm_util_exists" lvchange
+ check_volume_sanity DMRAID "$dmraid_detected" "$dmraid_util_exists" dmraid
+ check_volume_sanity SWAP "$swap_detected" "$swap_util_exists" swapon
++ check_volume_sanity MDRAID "$mdraid_detected" "$mdraid_util_exists" mdadm
+ fi
+
+ 66-yeller %benable%n service: "tty-earlier@tty12"
+@@ -400,6 +411,7 @@ if [ "${LVM}" = "no" ] && \
+ [ "${DMRAID}" = "no" ] && \
+ [ "${BTRFS}" = "no" ] && \
+ [ "${ZFS}" = "no" ] && \
++[ "${MDRAID}" = "no" ] && \
+ [ "${CRYPTTAB}" = "no" ]; then
+ sv_comment_real "system-Devices"
+ fi
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0010-service-boot-add-MDRAID-and-CHECK_CONFIGURATION-as-c.patch b/srcpkgs/boot-66serv/patches/0010-service-boot-add-MDRAID-and-CHECK_CONFIGURATION-as-c.patch
new file mode 100644
index 000000000000..f562f7d15f9b
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0010-service-boot-add-MDRAID-and-CHECK_CONFIGURATION-as-c.patch
@@ -0,0 +1,39 @@
+From 4e50b48615b49cdd26fc3e6d35635e0a65f6ae49 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Thu, 29 Sep 2022 19:50:01 +0300
+Subject: [PATCH 10/23] service/boot@ : add MDRAID and CHECK_CONFIGURATION as
+ configuration keys in the [environment]
+
+---
+ service/boot@ | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/service/boot@ b/service/boot@
+index f08eac1..e4e2c7d 100644
+--- a/service/boot@
++++ b/service/boot@
+@@ -102,6 +102,10 @@
+
+ @ZFS_IMPORT@
+
++## Activate mdraid arrays
++
++@MDRAID@
++
+ #=======================================================================
+ #=================== Advanced user configuration =======================
+ #
+@@ -235,3 +239,10 @@
+ ## Create /tmp/{.X11-unix,.ICE-unix} files
+
+ @POPULATE_TMP@
++
++#========================== Configuration checks ==========================
++
++## Check the configuration for errors
++
++@CHECK_CONFIGURATION@
++
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0011-configure-more-fixes.patch b/srcpkgs/boot-66serv/patches/0011-configure-more-fixes.patch
new file mode 100644
index 000000000000..e3bc6e64a958
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0011-configure-more-fixes.patch
@@ -0,0 +1,79 @@
+From 814c7a07c564af50ccb52f0410d5d13d63b25206 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sat, 1 Oct 2022 12:27:55 +0300
+Subject: [PATCH 11/23] configure : more fixes...
+
+---
+ module/boot@/configure/configure | 22 ++++++++++++----------
+ 1 file changed, 12 insertions(+), 10 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index bdbccf9..2116070 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -27,7 +27,8 @@ ZFS UDEV SYSCTL FORCECHCK CGROUPS MODULE_SYSTEM RANDOMSEED MNT_NETFS"
+ sv_extra_list_check="HOSTNAME TZ TTY KEYMAP FONT"
+
+ ## Message functions. They use 66-yeller to provide three different levels of
+-## messages for the script.
++## messages for the script. Colors are available if 66-enabled is invoked with
++## the -z option.
+
+ die(){
+ # Prints a fatal error message, in red color and exits the script.
+@@ -43,7 +44,7 @@ warn() {
+ }
+
+ emit_trace() {
+- # Prints a tracing message in red, visible only when the 66-enable is
++ # Prints a tracing message in blue color, visible only when the 66-enable is
+ # invoced with a verbosity (-v) level of 3 or above.
+ trace_message="$( printf '%s' "${@}" )"
+ 66-yeller -t "%b $trace_message %n"
+@@ -131,7 +132,7 @@ check_var_existance() {
+
+ check_boolean_var_values() {
+ # ${1} is a list of key names
+- # ${2} and ${2} are valid values for these keys
++ # ${2} and ${3} are valid values for these keys
+ for key in ${1}
+ do
+ eval key_value="\$${key}"
+@@ -158,13 +159,14 @@ check_volume_sanity() {
+ eval key_value="\$${1}"
+ key_value="$key_value"
+ [ "$key_value" = "yes" ] && [ "${2}" -gt 0 ] && [ "${3}" -eq 1 ] && \
+- emit_trace "${1} is enabled and configured correctly"
+- [ "${1}" = "yes" ] && [ "${2}" -eq 0 ] && warn "${1} is set to
++ emit_trace "${1} is enabled and configured correctly."
++ [ "$key_value" = "yes" ] && [ "${2}" -eq 0 ] && warn "${1} is set to
+ [ $key_value ] but there are no relevant volumes present. This is\
+- a non-fatal warning, you may want to check your configuration"
++ a non-fatal warning, you may want to check your configuration!"
+ [ "$key_value" = "yes" ] && [ "${2}" -gt 0 ] && [ "${3}" -eq 0 ] && \
+- die "${1} is set to [$key_value], relevant volumes exist but [${4}] does not exist. \
+-The process cannot continue, please check your configuration and try again"
++ die "${1} is set to [$key_value], relevant volumes exist but the [${4}] program is not
++ present in the system. \
++The process cannot continue, please check your configuration and try again."
+ [ "$key_value" = "no" ] && [ "${2}" -gt 0 ] && \
+ warn "${1} is set to [$key_value], but relevant volumes exist. \
+ This is a non-fatal warning but you should check your configuration!"
+@@ -349,12 +351,12 @@ if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
+ check_keymap
+ check_consolefont
+ check_volume_sanity BTRFS "$btrfs_detected" "$btrfs_util_exists" btrfs
+- check_volume_sanity ZFS "$zfs_detected" "$zfs_util_exists" zfs
++ check_volume_sanity ZFS "$zfs_member_detected" "$zfs_util_exists" zfs
+ check_volume_sanity CRYPTTAB "$crypto_LUKS_detected" "$luks_util_exists" cryptsetup
+ check_volume_sanity LVM "$LVM2_member_detected" "$lvm_util_exists" lvchange
+ check_volume_sanity DMRAID "$dmraid_detected" "$dmraid_util_exists" dmraid
+ check_volume_sanity SWAP "$swap_detected" "$swap_util_exists" swapon
+- check_volume_sanity MDRAID "$mdraid_detected" "$mdraid_util_exists" mdadm
++ check_volume_sanity MDRAID "$linux_raid_member_detected" "$mdraid_util_exists" mdadm
+ fi
+
+ 66-yeller %benable%n service: "tty-earlier@tty12"
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0012-configure-more-changes.patch b/srcpkgs/boot-66serv/patches/0012-configure-more-changes.patch
new file mode 100644
index 000000000000..2a953f122c5a
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0012-configure-more-changes.patch
@@ -0,0 +1,60 @@
+From 6490c41a82ce3ddab0ec88a71a2556bbc17691e7 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sat, 1 Oct 2022 14:36:31 +0300
+Subject: [PATCH 12/23] configure: more changes...
+
+- remove check_empty_var() and replace with check_var_existance() for
+FIREWALL
+- add a check for the ZFS_IMPORT values
+---
+ module/boot@/configure/configure | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index 2116070..ca55e78 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -110,12 +110,6 @@ detect_util swap_util swapon
+ detect_util mdraid_util mdadm
+
+ ## Check functions.
+-check_empty_var(){
+- name="${1}" var_value="${2}"
+- if [ -z "${var_value}" ]; then
+- die invalid value for variable: "${name}"
+- fi
+-}
+
+ check_var_existance() {
+ # ${1} is a list with key names
+@@ -357,6 +351,9 @@ if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
+ check_volume_sanity DMRAID "$dmraid_detected" "$dmraid_util_exists" dmraid
+ check_volume_sanity SWAP "$swap_detected" "$swap_util_exists" swapon
+ check_volume_sanity MDRAID "$linux_raid_member_detected" "$mdraid_util_exists" mdadm
++ if [ "${ZFS}" = "yes" ]; then
++ check_boolean_var_values "ZFS_IMPORT" zpoolcache devices-zfs-import-scan
++ fi
+ fi
+
+ 66-yeller %benable%n service: "tty-earlier@tty12"
+@@ -399,6 +396,8 @@ if [ "${CONTAINER}" = "yes" ]; then
+ fi
+
+ if [ "${ZFS}" = "yes" ]; then
++
++ check_boolean_var_values "ZFS_IMPORT" zpoolcache devices-zfs-import-scan
+ if [ "${ZFS_IMPORT}" = "zpoolcache" ]; then
+ sv_comment_real "devices-zfs-import-scan"
+ else
+@@ -428,7 +427,7 @@ fi
+
+ if execl-toc -X -V FIREWALL; then
+
+- check_empty_var "FIREWALL" "${FIREWALL}"
++ check_var_existance "FIREWALL"
+
+ for sv in "iptables" "ip6tables" "nftables" "ebtables" "arptables"; do
+ if [ "${FIREWALL}" = "${sv}" ]; then
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0013-configure-do-the-ZFS_IMPORT-check-only-with-CHECK_CO.patch b/srcpkgs/boot-66serv/patches/0013-configure-do-the-ZFS_IMPORT-check-only-with-CHECK_CO.patch
new file mode 100644
index 000000000000..ef28cbf32086
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0013-configure-do-the-ZFS_IMPORT-check-only-with-CHECK_CO.patch
@@ -0,0 +1,25 @@
+From 70b509e490ac28560cab383408cd9696c853ccc3 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sat, 1 Oct 2022 17:31:43 +0300
+Subject: [PATCH 13/23] configure: do the ZFS_IMPORT check only with
+ CHECK_CONFIGURATION=yes.
+
+---
+ module/boot@/configure/configure | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index ca55e78..942751a 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -397,7 +397,6 @@ fi
+
+ if [ "${ZFS}" = "yes" ]; then
+
+- check_boolean_var_values "ZFS_IMPORT" zpoolcache devices-zfs-import-scan
+ if [ "${ZFS_IMPORT}" = "zpoolcache" ]; then
+ sv_comment_real "devices-zfs-import-scan"
+ else
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0014-doc-boot-.md-and-service-boot-try-to-have-consistent.patch b/srcpkgs/boot-66serv/patches/0014-doc-boot-.md-and-service-boot-try-to-have-consistent.patch
new file mode 100644
index 000000000000..5ce87b234585
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0014-doc-boot-.md-and-service-boot-try-to-have-consistent.patch
@@ -0,0 +1,58 @@
+From c81a6ff10bd598399c0d0fb1ef8aa31116f0c7dc Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sat, 1 Oct 2022 17:48:14 +0300
+Subject: [PATCH 14/23] doc/boot@.md and service/boot@ : try to have consistent
+ naming
+
+- use disks/devices/filesystems/volume groups consistently
+- naming is based on the output of the relevant commands and/or the
+manpages
+---
+ service/boot@ | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/service/boot@ b/service/boot@
+index e4e2c7d..856ef38 100644
+--- a/service/boot@
++++ b/service/boot@
+@@ -77,23 +77,23 @@
+
+ @FSTAB@
+
+-## Active swap [yes|no].
++## Activate swap [yes|no].
+
+ @SWAP@
+
+-## Active lvm devices [yes|no].
++## Activate lvm volume groups [yes|no].
+
+ @LVM@
+
+-## Active dmraid devices [yes|no].
++## Activate dmraid disks [yes|no].
+
+ @DMRAID@
+
+-## Active btrfs devices [yes|no].
++## Activate btrfs devices [yes|no].
+
+ @BTRFS@
+
+-## Mount zfs devices [yes|no].
++## Mount zfs filesystems [yes|no].
+
+ @ZFS@
+
+@@ -171,7 +171,7 @@
+
+ #========================== Security ===================================
+
+-## Active encrypted devices [yes|no].
++## Activate encrypted devices [yes|no].
+
+ @CRYPTTAB@
+
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0015-Makefile-configure-add-code-for-MDRAID-and-CHECK_CON.patch b/srcpkgs/boot-66serv/patches/0015-Makefile-configure-add-code-for-MDRAID-and-CHECK_CON.patch
new file mode 100644
index 000000000000..ccf5763eafd9
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0015-Makefile-configure-add-code-for-MDRAID-and-CHECK_CON.patch
@@ -0,0 +1,117 @@
+From a622bbb11a5c2e8893cba71d037444997970ab69 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 10:56:29 +0300
+Subject: [PATCH 15/23] Makefile, configure: add code for MDRAID and
+ CHECK_CONFIGURATION.
+
+---
+ Makefile | 4 +++-
+ configure | 12 ++++++++++--
+ 2 files changed, 13 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index f137878..8303652 100644
+--- a/Makefile
++++ b/Makefile
+@@ -81,6 +81,7 @@ $(DESTDIR)$(service_directory)/%: service/%
+ -e "s,@SWAP@,$(SWAP)," \
+ -e "s,@LVM@,$(LVM)," \
+ -e "s,@DMRAID@,$(DMRAID)," \
++ -e "s,@MDRAID@,$(MDRAID)," \
+ -e "s,@BTRFS@,$(BTRFS)," \
+ -e "s,@ZFS@,$(ZFS)," \
+ -e "s,@ZFS_IMPORT@,$(ZFS_IMPORT)," \
+@@ -98,7 +99,8 @@ $(DESTDIR)$(service_directory)/%: service/%
+ -e "s,@POPULATE_SYS@,$(POPULATE_SYS)," \
+ -e "s,@POPULATE_DEV@,$(POPULATE_DEV)," \
+ -e "s,@POPULATE_RUN@,$(POPULATE_RUN)," \
+- -e "s,@POPULATE_TMP@,$(POPULATE_TMP)," $@
++ -e "s,@POPULATE_TMP@,$(POPULATE_TMP)," \
++ -e "s,@CHECK_CONFIGURATION@,$(CHECK_CONFIGURATION)," $@
+
+ $(DESTDIR)$(datarootdir)/doc/$(package)/%.html: doc/html/%.html
+ $(INSTALL) -D -m 644 $< $@ && \
+diff --git a/configure b/configure
+index 9622be3..75494db 100755
+--- a/configure
++++ b/configure
+@@ -50,6 +50,7 @@ Fine tunning of boot configuration:
+ --SWAP=BOOLEAN mount swap [!no]
+ --LVM=BOOLEAN mount lvm devices [!no]
+ --DMRAID=BOOLEAN mount dmraid devices [!no]
++ --MDRAID=BOOLEAN mount mdraid devices [!no]
+ --BTRFS=BOOLEAN mount btrfs devices [!no]
+ --ZFS=BOOLEAN mount zfs devices [!no]
+ --ZFS_IMPORT=VALUE use scan or zpoolcache method for zfs pools importation [!zpoolcache]
+@@ -68,6 +69,7 @@ Fine tunning of boot configuration:
+ --POPULATE_DEV=BOOLEAN populate dev directory [!yes]
+ --POPULATE_RUN=BOOLEAN populate run directory [!yes]
+ --POPULATE_TMP=BOOLEAN populate tmp directory [!yes]
++ --CHECK_CONFIGURATION=BOOLEAN enable checks on 66-enable [!yes]
+
+
+ Use yes or no with lowercase character to set BOOLEAN values.
+@@ -167,6 +169,7 @@ FSTAB='!yes'
+ SWAP='!no'
+ LVM='!no'
+ DMRAID='!no'
++MDRAID='!no'
+ BTRFS='!no'
+ ZFS='!no'
+ ZFS_IMPORT='!zpoolcache'
+@@ -185,6 +188,7 @@ POPULATE_SYS='!yes'
+ POPULATE_DEV='!yes'
+ POPULATE_RUN='!yes'
+ POPULATE_TMP='!yes'
++CHECK_CONFIGURATION='!yes'
+
+
+ for arg ; do
+@@ -226,6 +230,7 @@ for arg ; do
+ --SWAP=*) SWAP=${arg#*=} ;;
+ --LVM=*) LVM=${arg#*=} ;;
+ --DMRAID=*) DMRAID=${arg#*=} ;;
++ --MDRAID=*) MDRAID=${arg#*=} ;;
+ --BTRFS=*) BTRFS=${arg#*=} ;;
+ --ZFS=*) ZFS=${arg#*=} ;;
+ --ZFS_IMPORT=*) ZFS_IMPORT=${arg#*=} ;;
+@@ -244,6 +249,7 @@ for arg ; do
+ --POPULATE_DEV=*) POPULATE_DEV=${arg#*=} ;;
+ --POPULATE_RUN=*) POPULATE_RUN=${arg#*=} ;;
+ --POPULATE_TMP=*) POPULATE_TMP=${arg#*=} ;;
++ --CHECK_CONFIGURATION=*) CHECK_CONFIGURATION=${arg#*=} ;;
+ -* ) echo "$0: unknown option $arg" ;;
+ *=*) ;;
+ *) target=$arg ;;
+@@ -298,10 +304,10 @@ done
+ for i in HOSTNAME HARDWARECLOCK TZ SETUPCONSOLE TTY \
+ KEYMAP FONT FONT_MAP FONT_UNIMAP UDEV SYSCTL FORCECHCK LOCAL CONTAINER \
+ TMPFILE MODULE_KERNEL MODULE_SYSTEM RANDOMSEED \
+- FSTAB SWAP LVM DMRAID BTRFS ZFS ZFS_IMPORT \
++ FSTAB SWAP LVM DMRAID MDRAID BTRFS ZFS ZFS_IMPORT \
+ CRYPTTAB FIREWALL \
+ CGROUPS MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP \
+- MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP ; do
++ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP CHECK_CONFIGURATION ; do
+ eval tmp=\${$i}
+ if testval $tmp; then
+ eval $i='${i}=\"\\#${i}=\"'
+@@ -372,6 +378,7 @@ $FSTAB
+ $SWAP
+ $LVM
+ $DMRAID
++$MDRAID
+ $BTRFS
+ $ZFS
+ $ZFS_IMPORT
+@@ -390,6 +397,7 @@ $POPULATE_SYS
+ $POPULATE_DEV
+ $POPULATE_RUN
+ $POPULATE_TMP
++$CHECK_CONFIGURATION
+ EOF
+
+ exec 1>&3 3>&-
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0016-service-mount-mount-swap-partially-revert-previous-c.patch b/srcpkgs/boot-66serv/patches/0016-service-mount-mount-swap-partially-revert-previous-c.patch
new file mode 100644
index 000000000000..da48771ae0eb
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0016-service-mount-mount-swap-partially-revert-previous-c.patch
@@ -0,0 +1,28 @@
+From 6f45c4d8008227a269db000be9751affb2980268 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 18:05:56 +0300
+Subject: [PATCH 16/23] service/mount/mount-swap: partially revert previous
+ change
+
+swapon does not fail when there is no swap partition/file, so it makes
+sense to have a stricter test.
+---
+ module/boot@/service/mount/mount-swap | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/module/boot@/service/mount/mount-swap b/module/boot@/service/mount/mount-swap
+index 3e8339a..e1d0663 100644
+--- a/module/boot@/service/mount/mount-swap
++++ b/module/boot@/service/mount/mount-swap
+@@ -16,7 +16,7 @@
+ swapon -a
+
+ }
+- 66-yeller -Wcdp mount-swap -1 /dev/console unable to activate the swap!
++ 66-yeller -fcdp mount-swap -1 /dev/console unable to activate the swap!
+
+ )
+
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0017-configure-configure-properly-disable-devices-mdraid-.patch b/srcpkgs/boot-66serv/patches/0017-configure-configure-properly-disable-devices-mdraid-.patch
new file mode 100644
index 000000000000..400cb5cad8ab
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0017-configure-configure-properly-disable-devices-mdraid-.patch
@@ -0,0 +1,62 @@
+From ab8029ba09e645fcf5f7e5434cbb7fa92752c937 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 20:03:36 +0300
+Subject: [PATCH 17/23] configure/configure: properly disable devices-mdraid
+ when MDRAID=!no.
+
+Also fix language on system-Devices and devices-mdraid.
+---
+ module/boot@/configure/configure | 4 ++--
+ module/boot@/service/system/devices/devices-mdraid | 2 +-
+ module/boot@/service/system/system-Devices | 2 +-
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index 942751a..7ec11bf 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -12,7 +12,7 @@ SV_REAL=
+
+ ## sv_boolean_list contain keys that take yes or no as values
+ sv_boolean_list="CRYPTTAB SETUPCONSOLE FSTAB SWAP LVM \
+-DMRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
++DMRAID MDRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
+ MODULE_SYSTEM RANDOMSEED MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP CGROUPS \
+ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP"
+ ## sv_container_list contained keys for options that are disabled in a container
+@@ -374,7 +374,7 @@ done
+
+ comment_udev() {
+ for sv in "udevd" "udevadm" "system-fontnkey" "devices-crypttab" \
+- "devices-dmraid" "devices-btrfs" "devices-lvm" ; do
++ "devices-dmraid" "devices-mdraid" "devices-btrfs" "devices-lvm" ; do
+ sv_comment_real ${sv}
+ done
+ }
+diff --git a/module/boot@/service/system/devices/devices-mdraid b/module/boot@/service/system/devices/devices-mdraid
+index d331c52..09eeaba 100644
+--- a/module/boot@/service/system/devices/devices-mdraid
++++ b/module/boot@/service/system/devices/devices-mdraid
+@@ -18,5 +18,5 @@
+ }
+ 66-yeller -fcdp devices-mdraid -1 /dev/console crashed! }
+
+- 66-yeller -cdp device-mdraid -1 /dev/console no mdraid volumes available!
++ 66-yeller -cdp device-mdraid -1 /dev/console no mdraid arrays available!
+ )
+diff --git a/module/boot@/service/system/system-Devices b/module/boot@/service/system/system-Devices
+index de10e56..5fd25ee 100644
+--- a/module/boot@/service/system/system-Devices
++++ b/module/boot@/service/system/system-Devices
+@@ -1,7 +1,7 @@
+ [main]
+ @type = bundle
+ @version = @vers@
+-@description = "Active specific devices"
++@description = "Activate specific devices"
+ @user = ( root )
+ @contents =
+ (
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0018-configure-configure-add-a-message-and-a-small-sleep-.patch b/srcpkgs/boot-66serv/patches/0018-configure-configure-add-a-message-and-a-small-sleep-.patch
new file mode 100644
index 000000000000..1803ee8ed0b8
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0018-configure-configure-add-a-message-and-a-small-sleep-.patch
@@ -0,0 +1,50 @@
+From 089b28b9aa2af51a8bebdb642ceb43d23c416491 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Mon, 3 Oct 2022 20:59:16 +0300
+Subject: [PATCH 18/23] configure/configure: add a message and a small sleep to
+ give the user the opportunity to actually see the warnings.
+
+---
+ module/boot@/configure/configure | 12 +++++++++++-
+ 1 file changed, 11 insertions(+), 1 deletion(-)
+
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index 7ec11bf..ffa965b 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -40,7 +40,7 @@ die(){
+ warn() {
+ # Print a warning message, non-fatal, always visible in yellow color.
+ warn_message="$( printf '%s' "${@}" )"
+- 66-yeller -W "%y $warn_message %n"
++ 66-yeller -W "%y $warn_message %n" && warning_counter=$((warning_counter+1))
+ }
+
+ emit_trace() {
+@@ -336,6 +336,7 @@ sv_comment_real() {
+ # Check the configuration if CHECK_CONFIGURATION is set to "yes" in the
+ # environment section/file
+ if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
++ warning_counter=0
+ check_var_existance "$sv_boolean_list"
+ check_var_existance "$sv_container_list_check"
+ check_var_existance "$sv_extra_list_check"
+@@ -354,6 +355,15 @@ if [ "${CHECK_CONFIGURATION}" = "yes" ]; then
+ if [ "${ZFS}" = "yes" ]; then
+ check_boolean_var_values "ZFS_IMPORT" zpoolcache devices-zfs-import-scan
+ fi
++ # If there are warnings, display a message and wait for a time relative
++ # to the number of warnings.
++ if [ $warning_counter -gt 0 ]; then
++ 66-yeller %g ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ %n
++ 66-yeller %g Please see above for warnings. The proccess will continue shortly... %n
++ 66-yeller %g ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ %n
++ wait_timer=$((warning_counter*3))
++ sleep "$wait_timer"
++ fi
+ fi
+
+ 66-yeller %benable%n service: "tty-earlier@tty12"
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0019-doc-boot-.md-Add-information-abouts-keys-that-do-not.patch b/srcpkgs/boot-66serv/patches/0019-doc-boot-.md-Add-information-abouts-keys-that-do-not.patch
new file mode 100644
index 000000000000..b77da1e59385
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0019-doc-boot-.md-Add-information-abouts-keys-that-do-not.patch
@@ -0,0 +1,102 @@
+From 4a0710da34186c74e149938be32caf821766030e Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Mon, 3 Oct 2022 21:01:40 +0300
+Subject: [PATCH 19/23] doc/boot@.md: Add information abouts keys that do not
+ need to be present in the environment/configuration file. Also change the
+ devices naming.
+
+---
+ doc/boot@.md | 20 +++++++++++++-------
+ 1 file changed, 13 insertions(+), 7 deletions(-)
+
+diff --git a/doc/boot@.md b/doc/boot@.md
+index 02117bb..c26015d 100644
+--- a/doc/boot@.md
++++ b/doc/boot@.md
+@@ -46,6 +46,8 @@ Two different kinds of variables are used:
+
+ - string: depends on the variable and is defined in the following documentation.
+
++Variables need to be present in the environment section/file, unless otherwise noted below.
++
+ ---
+
+ - **HOSTNAME**:
+@@ -62,6 +64,7 @@ Two different kinds of variables are used:
+ - type: string.
+ - valid value: any valid name found at `/usr/share/kbd/keymaps` directory.
+ - description: uses the `loadkeys` program to set the keymap for the console to use. Usually a simple string like fr, us,...
++ - KEYMAP does not need to be present in the environment.
+
+ - **FONT**:
+ - type: string.
+@@ -72,11 +75,13 @@ Two different kinds of variables are used:
+ - type: string.
+ - valid value: any valid name found at `/usr/share/kbd/consoletrans`.
+ - description: uses the `setfont` program to indicate the mapping to use. Usually a simple string like 8859-1, 8859-2,...
++ - FONT_MAP does not need to be present in the environment.
+
+ - **FONT_UNIMAP**:
+ - type: string.
+ - valid value: any valid name found at `/usr/share/kbd/unimaps`.
+ - description: uses the `setfont` program to indicate the unicode mapping table to use. Usually no mapping table is needed, and a Unicode mapping table is already contained in the font.
++ - FONT_UNIMAP does not need to be present in the environment.
+
+ - **FSTAB**:
+ - type: boolean.
+@@ -88,23 +93,23 @@ Two different kinds of variables are used:
+
+ - **LVM**:
+ - type: boolean.
+- - description: uses the `vgchange` program to activate LVM partitions and `cryptsetup` to open luks volumes in them. If the programs are not installed in the system, or if lvm devices are not discovered, an warning is emmited.
++ - description: uses the `vgchange` program to activate LVM volume groups and `cryptsetup` to open luks volumes in them. If the programs are not installed in the system, or if lvm devices are not discovered, a warning is emmited.
+
+ - **DMRAID**:
+ - type: boolean.
+- - description: uses the `dmraid` program to activate RAID devices. If the program is not installed in the system, or if dmraid devices are not discovered, a warning is emmited.
++ - description: uses the `dmraid` program to activate dmraid disks. If the program is not installed in the system, or if dmraid devices are not discovered, a warning is emmited.
+
+ - **MDRAID**:
+ - type: boolean.
+- - description: uses the `mdadm` program to activate software raid (mdraid) devices. If the program is not installed in the system, or if mdraid devices are not discovered, a warning is emmited.
++ - description: uses the `mdadm` program to activate software raid (mdraid) arrays. If the program is not installed in the system, or if mdraid devices are not discovered, a warning is emmited.
+
+ - **BTRFS**:
+ - type: boolean.
+- - description: uses the `btrfs` program to activate BTRFS partitions. If the program is not installed in the system, or if btrfs devices are not discovered, a warning is emmited.
++ - description: uses the `btrfs` program to activate BTRFS devices. If the program is not installed in the system, or if btrfs devices are not discovered, a warning is emmited.
+
+ - **ZFS**:
+ - type: boolean.
+- - description: uses the `zfs` program to mount ZFS partitions. If the program is not installed in the system, or if zfs devices are not discovered, a warning is emmited.
++ - description: uses the `zfs` program to mount ZFS filesystems. If the program is not installed in the system, or if zfs devices are not discovered, a warning is emmited.
+
+ - **ZFS_IMPORT**:
+ - type: string.
+@@ -161,7 +166,7 @@ Two different kinds of variables are used:
+
+ - **CRYPTTAB**:
+ - type: boolean.
+- - description: use the file `/etc/crypttab` to decrypt an encrypted device. The file `/etc/crypttab` ***must*** exist on your system.
++ - description: use the file `/etc/crypttab` to decrypt encrypted devices. The file `/etc/crypttab` ***must*** exist on your system.
+
+ *CRYPTTAB relies on the `blkid` program from `util-linux` for device descovery.*
+
+@@ -169,6 +174,7 @@ Two different kinds of variables are used:
+ - type: string.
+ - valid value: iptables,ip6tables,nftables,ebtables,arptables.
+ - description: use the given program to set a firewall applying the corresponding configuration files. In case of iptables and ip6tables the `/etc/<program>/<program>.rules` file ***must*** exist on your system. In other cases the `/etc/<program>.conf` ***must*** exist on your system.
++ - FIREWALL does not need to be present in the environment.
+
+ - **CGROUPS**:
+ - type: boolean.
+@@ -225,4 +231,4 @@ Two different kinds of variables are used:
+ - **CHECK_CONFIGURATION**:
+ - type: boolean
+ - description: run configuration checks when enabling the boot@ service
+-
++ - CHECK_CONFIGURATION does not need to present in the environment. If it is not, checks are disabled.
+\ No newline at end of file
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0020-system-modules-modules-system-use-the-void-runit-mod.patch b/srcpkgs/boot-66serv/patches/0020-system-modules-modules-system-use-the-void-runit-mod.patch
new file mode 100644
index 000000000000..21adb560c415
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0020-system-modules-modules-system-use-the-void-runit-mod.patch
@@ -0,0 +1,31 @@
+From a208ed0ce8d4a879adffcb7b1c8704e1586e2499 Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 12:17:54 +0300
+Subject: [PATCH 20/23] system/modules/modules-system: use the void-runit
+ modules-load script.
+
+---
+ module/boot@/service/system/modules/modules-system | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+diff --git a/module/boot@/service/system/modules/modules-system b/module/boot@/service/system/modules/modules-system
+index f90abea..e69f788 100644
+--- a/module/boot@/service/system/modules/modules-system
++++ b/module/boot@/service/system/modules/modules-system
+@@ -12,11 +12,8 @@
+ if { 66-yeller -cdp modules-system -1 /dev/console starts... }
+ if -nt {
+
+- ${SCRIPT_FILE}
++ modules-load -v
+
+ }
+- 66-yeller -fcdp modules-system -1 /dev/console crashed!
++ 66-yeller -Wcdp modules-system -1 /dev/console crashed!
+ )
+-
+-[environment]
+-SCRIPT_FILE=!@modules@/modules.sh
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0021-system-system-sysctl-use-code-from-runit-void-for-sy.patch b/srcpkgs/boot-66serv/patches/0021-system-system-sysctl-use-code-from-runit-void-for-sy.patch
new file mode 100644
index 000000000000..9460e81a018b
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0021-system-system-sysctl-use-code-from-runit-void-for-sy.patch
@@ -0,0 +1,29 @@
+From 7e56c1e889665ea164cd5f6c31843ff75d1b9abb Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 12:22:12 +0300
+Subject: [PATCH 21/23] system/system-sysctl: use code from runit-void for
+ sysctl.
+
+---
+ module/boot@/service/system/system-sysctl | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/module/boot@/service/system/system-sysctl b/module/boot@/service/system/system-sysctl
+index cd4b48e..96de1f0 100644
+--- a/module/boot@/service/system/system-sysctl
++++ b/module/boot@/service/system/system-sysctl
+@@ -12,9 +12,8 @@
+ if { 66-yeller -cdp system-sysctl -1 /dev/console starts... }
+ if -nt {
+
+- if { 66-which -q sysctl }
+- sysctl --system
++ /usr/share/66/script/sysctl.sh
+
+ }
+- 66-yeller -fcdp system-sysctl -1 /dev/console crashed!
++ 66-yeller -Wcdp system-sysctl -1 /dev/console crashed!
+ )
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0022-populate-sys-mount-efivarfs-rw-to-follow-voidlinux-p.patch b/srcpkgs/boot-66serv/patches/0022-populate-sys-mount-efivarfs-rw-to-follow-voidlinux-p.patch
new file mode 100644
index 000000000000..a1b126ef3ef6
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0022-populate-sys-mount-efivarfs-rw-to-follow-voidlinux-p.patch
@@ -0,0 +1,26 @@
+From e1614cc94815e8ae24c43f0811218766b6bcbdda Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sun, 2 Oct 2022 20:07:21 +0300
+Subject: [PATCH 22/23] populate-sys: mount efivarfs rw to follow voidlinux
+ policy.
+
+---
+ module/boot@/service/mount/populate/populate-sys | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/module/boot@/service/mount/populate/populate-sys b/module/boot@/service/mount/populate/populate-sys
+index c1a5ee8..2583644 100644
+--- a/module/boot@/service/mount/populate/populate-sys
++++ b/module/boot@/service/mount/populate/populate-sys
+@@ -14,7 +14,7 @@
+
+ foreground {
+ if -t { grep -Fq efivarfs /proc/filesystems }
+- execl-toc -tX -m /sys/firmware/efi/efivars -o noatime,nodev,noexec,nosuid,ro -t efivarfs -d efivars
++ execl-toc -tX -m /sys/firmware/efi/efivars -o noatime,nodev,noexec,nosuid,rw -t efivarfs -d efivars
+ }
+
+ foreground {
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/patches/0023-Remove-tmpfiles-support.patch b/srcpkgs/boot-66serv/patches/0023-Remove-tmpfiles-support.patch
new file mode 100644
index 000000000000..75ebd8e747f7
--- /dev/null
+++ b/srcpkgs/boot-66serv/patches/0023-Remove-tmpfiles-support.patch
@@ -0,0 +1,210 @@
+From 1bd9c340ff45b447b0fe2b150859fc9e322b430c Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Wed, 5 Oct 2022 17:57:12 +0300
+Subject: [PATCH 23/23] Remove tmpfiles support.
+
+---
+ Makefile | 2 --
+ configure | 7 +------
+ doc/boot@.md | 3 ---
+ module/boot@/configure/configure | 3 +--
+ module/boot@/service/all-Local | 1 -
+ module/boot@/service/local/local-dmesg | 1 -
+ module/boot@/service/local/local-rc | 3 +--
+ module/boot@/service/local/local-tmpfiles | 23 -----------------------
+ service/boot@ | 3 ---
+ 9 files changed, 3 insertions(+), 43 deletions(-)
+ delete mode 100644 module/boot@/service/local/local-tmpfiles
+
+diff --git a/Makefile b/Makefile
+index 8303652..df010f8 100644
+--- a/Makefile
++++ b/Makefile
+@@ -56,7 +56,6 @@ $(DESTDIR)$(service_directory)/%: service/%
+ -e "s,@script_directory@,$(script_directory)," \
+ -e "s,@skel_directory@,$(skel_directory)," \
+ -e "s,@livedir@,$(livedir)," \
+- -e "s,@tmpfiles_path@,$(tmpfiles)," \
+ -e "s,@modules_path@,$(modules)," \
+ -e "s,@VERSION@,$(version)," \
+ -e "s,@HOSTNAME@,$(HOSTNAME)," \
+@@ -73,7 +72,6 @@ $(DESTDIR)$(service_directory)/%: service/%
+ -e "s,@FORCECHCK@,$(FORCECHCK)," \
+ -e "s,@LOCAL@,$(LOCAL)," \
+ -e "s,@CONTAINER@,$(CONTAINER)," \
+- -e "s,@TMPFILE@,$(TMPFILE)," \
+ -e "s,@MODULE_KERNEL@,$(MODULE_KERNEL)," \
+ -e "s,@MODULE_SYSTEM@,$(MODULE_SYSTEM)," \
+ -e "s,@RANDOMSEED@,$(RANDOMSEED)," \
+diff --git a/configure b/configure
+index 75494db..bc0145e 100755
+--- a/configure
++++ b/configure
+@@ -24,7 +24,6 @@ Fine tuning of the installation directories:
+ --with-system-script=DIR 66 script installation directory of scripts [DATAROOTDIR/$package_macro_dir/script]
+ --with-sysadmin-service-conf=DIR 66 sysadmin service configuration file directory [SYSDIR/$package_macro_dir/conf]
+ --with-skeleton=DIR 66 skeleton files directory installation [SYSDIR/$package_macro_dir]
+- --opentmpfiles-script=DIR absolute path of the opentmpfiles script [BINDIR]
+ --modules-script=DIR absolute path of the modules script [BINDIR]
+
+ Fine tunning of boot configuration:
+@@ -42,7 +41,6 @@ Fine tunning of boot configuration:
+ --FORCECHCK=BOOLEAN force a check of the filesystem [!no]
+ --LOCAL=BOOLEAN use rc.local scripts [!no]
+ --CONTAINER=BOOLEAN boot inside a container [!no]
+- --TMPFILE=BOOLEAN use tmpfiles.d files [!yes]
+ --MODULE_KERNEL=BOOLEAN load modules kernel [!yes]
+ --MODULE_SYSTEM=BOOLEAN load modules from modules.d files [!yes]
+ --RANDOMSEED=BOOLEAN set random seed [!yes]
+@@ -161,7 +159,6 @@ SYSCTL='!yes'
+ FORCECHCK='!no'
+ LOCAL='!no'
+ CONTAINER='!no'
+-TMPFILE='!yes'
+ MODULE_KERNEL='!yes'
+ MODULE_SYSTEM='!yes'
+ RANDOMSEED='!yes'
+@@ -222,7 +219,6 @@ for arg ; do
+ --FORCECHCK=*) FORCECHCK=${arg#*=} ;;
+ --LOCAL=*) LOCAL=${arg#*=} ;;
+ --CONTAINER=*) CONTAINER=${arg#*=} ;;
+- --TMPFILE=*) TMPFILE=${arg#*=} ;;
+ --MODULE_KERNEL=*) MODULE_KERNEL=${arg#*=} ;;
+ --MODULE_SYSTEM=*) MODULE_SYSTEM=${arg#*=} ;;
+ --RANDOMSEED=*) RANDOMSEED=${arg#*=} ;;
+@@ -303,7 +299,7 @@ done
+
+ for i in HOSTNAME HARDWARECLOCK TZ SETUPCONSOLE TTY \
+ KEYMAP FONT FONT_MAP FONT_UNIMAP UDEV SYSCTL FORCECHCK LOCAL CONTAINER \
+- TMPFILE MODULE_KERNEL MODULE_SYSTEM RANDOMSEED \
++ MODULE_KERNEL MODULE_SYSTEM RANDOMSEED \
+ FSTAB SWAP LVM DMRAID MDRAID BTRFS ZFS ZFS_IMPORT \
+ CRYPTTAB FIREWALL \
+ CGROUPS MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP \
+@@ -370,7 +366,6 @@ $SYSCTL
+ $FORCECHCK
+ $LOCAL
+ $CONTAINER
+-$TMPFILE
+ $MODULE_KERNEL
+ $MODULE_SYSTEM
+ $RANDOMSEED
+diff --git a/doc/boot@.md b/doc/boot@.md
+index c26015d..917096f 100644
+--- a/doc/boot@.md
++++ b/doc/boot@.md
+@@ -148,9 +148,6 @@ Variables need to be present in the environment section/file, unless otherwise n
+ - type: boolean.
+ - description: convenient variable used to boot inside a container. Some services will not work or be unnecessary when you boot inside a container. This variable provides you a safe default for this purpose. If set to yes the `HARDWARECLOCK`, `SETUPCONSOLE`, `KEYMAP`, `FONT`, `FONT_MAP`, `FONT_UNIMAP`, `CRYPTTAB`, `SWAP`, `LVM`, `DMRAID`, `BTRFS`, `ZFS`, `UDEV`, `SYSCTL`, `FORCECHCK`, `CGROUPS`, `MODULE_SYSTEM`, `RANDOMSEED`, `MNT_NETFS` variables have no effect.
+
+-- **TMPFILES**:
+- - type: boolean.
+- - description: read, parse and apply a systemd-style tmpfiles.d files usually found at `/usr/lib/tmpfiles.d` directory to handle volatile and temporary files.
+
+ - **MODULE_KERNEL**:
+ - type: boolean.
+diff --git a/module/boot@/configure/configure b/module/boot@/configure/configure
+index ffa965b..3293794 100755
+--- a/module/boot@/configure/configure
++++ b/module/boot@/configure/configure
+@@ -12,7 +12,7 @@ SV_REAL=
+
+ ## sv_boolean_list contain keys that take yes or no as values
+ sv_boolean_list="CRYPTTAB SETUPCONSOLE FSTAB SWAP LVM \
+-DMRAID MDRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER TMPFILE MODULE_KERNEL \
++DMRAID MDRAID BTRFS ZFS UDEV SYSCTL LOCAL CONTAINER MODULE_KERNEL \
+ MODULE_SYSTEM RANDOMSEED MNT_PROC MNT_SYS MNT_DEV MNT_RUN MNT_TMP CGROUPS \
+ MNT_PTS MNT_SHM MNT_NETFS POPULATE_SYS POPULATE_DEV POPULATE_RUN POPULATE_TMP"
+ ## sv_container_list contained keys for options that are disabled in a container
+@@ -251,7 +251,6 @@ retrieve_sv_name(){
+ SYSCTL) SV_REAL="system-sysctl" ;;
+ FORCECHCK) SV_REAL="system-fsck" ;;
+ LOCAL) SV_REAL="local-rc" ;;
+- TMPFILE) SV_REAL="local-tmpfiles" ;;
+ MODULE_KERNEL) SV_REAL="modules-kernel" ;;
+ MODULE_SYSTEM) SV_REAL="modules-system" ;;
+ RANDOMSEED) SV_REAL="system-random" ;;
+diff --git a/module/boot@/service/all-Local b/module/boot@/service/all-Local
+index 95a2a1b..2e08187 100644
+--- a/module/boot@/service/all-Local
++++ b/module/boot@/service/all-Local
+@@ -17,7 +17,6 @@ local-loop
+ local-sethostname
+ local-time
+ local-authfiles
+-local-tmpfiles
+ local-rc
+ local-dmesg
+ )
+diff --git a/module/boot@/service/local/local-dmesg b/module/boot@/service/local/local-dmesg
+index fe38ef4..ed87f7e 100644
+--- a/module/boot@/service/local/local-dmesg
++++ b/module/boot@/service/local/local-dmesg
+@@ -13,7 +13,6 @@ local-arptables
+ local-loop
+ local-sethostname
+ local-time
+-local-tmpfiles
+ local-authfiles
+ local-rc )
+ @user = ( root )
+diff --git a/module/boot@/service/local/local-rc b/module/boot@/service/local/local-rc
+index 7890b73..254b0c1 100644
+--- a/module/boot@/service/local/local-rc
++++ b/module/boot@/service/local/local-rc
+@@ -13,8 +13,7 @@
+ local-arptables
+ local-loop
+ local-time
+- local-authfiles
+- local-tmpfiles )
++ local-authfiles )
+
+ [start]
+ @execute =
+diff --git a/module/boot@/service/local/local-tmpfiles b/module/boot@/service/local/local-tmpfiles
+deleted file mode 100644
+index 344e02d..0000000
+--- a/module/boot@/service/local/local-tmpfiles
++++ /dev/null
+@@ -1,23 +0,0 @@
+-[main]
+-@type = oneshot
+-@version = @vers@
+-@description = "Create temporary files"
+-@depends = ( mount-rw )
+-@user = ( root )
+-@options = ( !log )
+-
+-[start]
+-@execute =
+-(
+- if { 66-yeller -cdp local-tmpfiles -1 /dev/console starts... }
+- if -nt {
+-
+- execl-cmdline -s { ${SCRIPT_FILE} ${SCRIPT_ARGS} }
+-
+- }
+- 66-yeller -Fcdp local-tmpfiles -1 /dev/console something went wrong!
+-)
+-
+-[environment]
+-SCRIPT_FILE=!@tmpfiles@/opentmpfiles.sh
+-SCRIPT_ARGS=!--create --verbose --boot
+diff --git a/service/boot@ b/service/boot@
+index 856ef38..8222abb 100644
+--- a/service/boot@
++++ b/service/boot@
+@@ -153,9 +153,6 @@
+
+ @CONTAINER@
+
+-## Apply tmpfiles.d configuration file [yes|no].
+-
+-@TMPFILE@
+
+ ## Load kernel modules [yes|no].
+
+--
+2.38.0
+
diff --git a/srcpkgs/boot-66serv/template b/srcpkgs/boot-66serv/template
new file mode 100755
index 000000000000..be9b2833f11a
--- /dev/null
+++ b/srcpkgs/boot-66serv/template
@@ -0,0 +1,61 @@
+# Template file for 'boot-66serv'
+pkgname=boot-66serv
+version=2.4.1
+revision=1
+#_upstr_version=2.4.1
+#wrksrc=${pkgname}-v${_upstr_version}
+wrksrc=${pkgname}-v${version}
+build_style=gnu-configure
+configure_args="--HOSTNAME=!voidlinux --TTY=!4
+ --KEYMAP=!us --TZ=!Europe/Madrid"
+make_install_target="install install-man install-html"
+hostmakedepends="lowdown"
+makedepends="file"
+depends="s6-linux-utils s6-portable-utils 66 66-tools virtual?awk"
+short_desc="Stage 1 boot for 66"
+maintainer="mobinmob <mobinmob@disroot.org>"
+# Upstream project is licensed under 0BSD from v2.4.1 onwards.
+# The 66boot-* utilities are under BSD-2-Clause.
+license="0BSD, BSD-2-Clause"
+homepage="https://git.obarun.org/obmods/boot-66serv"
+conf_files="/etc/66/rc.local"
+#distfiles="https://git.obarun.org/obmods/boot-66serv/-/archive/v${_upstr_version}/boot-66serv-v${_upstr_version}.tar.bz2"
+distfiles="https://git.obarun.org/obmods/boot-66serv/-/archive/v${version}/boot-66serv-v${version}.tar.bz2"
+checksum=3f6b7437451a1ca20820fa75d42e0165d88e2ec722fcfad1276f276a97c46a7c
+patch_args=" -Np1"
+make_dirs="/etc/runit/runsvdir/66 0750 root root"
+
+post_install() {
+
+ # Install the switch-initutils core service for runit.
+ vinstall "${FILESDIR}"/switch-initutils 644 etc/runit/core-services 99-switch-initutils.sh
+ # Install the 66 wrapper for 66-boot
+ vbin "${FILESDIR}"/66
+ # Install the 66boot-initial-setup utility
+ vbin "${FILESDIR}"/66boot-initial-setup
+ # Install the 66boot-rcdotconf utility
+ vbin "${FILESDIR}"/66boot-rcdotconf
+ # Install the 66boot-storage-autoconf utility
+ vbin "${FILESDIR}"/66boot-storage-autoconf
+ # Create symlink for the boot@system service configuration file
+ ln -s ../etc/66/conf/boot@system/version/boot@system "${DESTDIR}/etc/66rc.conf"
+
+ # Install runit, runit-wrapsv@ and switch-initutils services for 66
+ # @version should be incremented only when there is a change in the specific
+ # frontend service file.
+ vinstall "${FILESDIR}"/runit 644 usr/share/66/service/
+ vsed -i "s/@VERSION@/0.0.1/" "${DESTDIR}/usr/share/66/service/runit"
+ vinstall "${FILESDIR}"/switch-initutils-66 644 usr/share/66/service/ switch-initutils
+ vsed -i "s/@VERSION@/0.0.3/" "${DESTDIR}/usr/share/66/service/switch-initutils"
+ vinstall "${FILESDIR}"/runit-wrapsv@ 644 usr/share/66/service/
+ vsed -i "s/@VERSION@/0.0.1/" "${DESTDIR}/usr/share/66/service/runit-wrapsv@"
+
+ # Install sysctl.sh in /usr/share/66/script/
+ vinstall "${FILESDIR}"/sysctl.sh 755 usr/share/66/script/
+
+ # Install backwards compatibility symlink for modules.sh
+ ln -s /usr/bin/modules-load ${DESTDIR}/usr/share/66/script/modules.sh
+
+ # Install license file
+ vlicense LICENSE
+}
From 11281bff4361b57df194024ec5067c5f3e0a9efb Mon Sep 17 00:00:00 2001
From: mobinmob <mobinmob@disroot.org>
Date: Sun, 5 Feb 2023 20:40:28 +0200
Subject: [PATCH 2/5] New package: scandir-66serv-0.3.1
---
srcpkgs/scandir-66serv/template | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
create mode 100644 srcpkgs/scandir-66serv/template
diff --git a/srcpkgs/scandir-66serv/template b/srcpkgs/scandir-66serv/template
new file mode 100644
index 000000000000..a064a1c9b962
--- /dev/null
+++ b/srcpkgs/scandir-66serv/template
@@ -0,0 +1,17 @@
+# Template file for 'scandir-66serv'
+pkgname=scandir-66serv
+version=0.3.1
+revision=1
+wrksrc="${pkgname}-v${version}"
+build_style=configure
+depends="66 66-tools"
+short_desc="66 module that enables user services"
+maintainer="mobinmob <mobinmob@disroot.org>"
+license="ISC"
+homepage="https://framagit.org/pkg/obmods/scandir-66serv"
+distfiles="https://framagit.org/pkg/obmods/scandir-66serv/-/archive/v${version}/scandir-66serv-v${version}.tar.bz2"
+checksum=2a5bb9ff80f7bf8e6caaccd243eb1f077a4e7ef12314aeca539673fbc92b9756
+
+post_install() {
+ vlicense LICENSE
+}
From cdd3eb23261f64bff52d504b20e1493d2f220cc2 Mon Sep 17 00:00:00 2001
From: mobinmob <mobinmob@disroot.org>
Date: Sun, 5 Feb 2023 20:40:35 +0200
Subject: [PATCH 3/5] New package: void-66-services-0.0.3
---
srcpkgs/void-66-services/template | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 srcpkgs/void-66-services/template
diff --git a/srcpkgs/void-66-services/template b/srcpkgs/void-66-services/template
new file mode 100644
index 000000000000..4e50084086db
--- /dev/null
+++ b/srcpkgs/void-66-services/template
@@ -0,0 +1,24 @@
+# Template file for 'void-66-services'
+pkgname=void-66-services
+version=0.0.3
+revision=1
+depends="66"
+short_desc="66 service frontend files for voidlinux"
+maintainer="mobinmob <mobinmob@disroot.org>"
+license="BSD-2-Clause"
+homepage="https://github.com/mobinmob/void-66-services/"
+distfiles="https://github.com/mobinmob/void-66-services/archive/${version}.tar.gz"
+checksum=15105a70ff7876001225e0ac666393243bd0a29cdb459910aa7c788997615ea1
+
+do_install() {
+ vmkdir usr
+ vcopy usr /
+ chmod +x "${DESTDIR}/usr/share/66/service/dbus/data/check"
+ vlicense LICENSE
+ vlicense LICENSE-3RD-PARTY
+ vlicense AUTHORS
+ vdoc conf/void-66-base-system.md
+ vdoc conf/void-66-conf.md
+ vdoc conf/void-66-logging.md
+ vdoc conf/void-66-runitsv.md
+}
From e03dbd6c210eca1bef9d3112e6bf2550a1ceb83c Mon Sep 17 00:00:00 2001
From: mobinmob <mobinmob@disroot.org>
Date: Sun, 5 Feb 2023 20:40:42 +0200
Subject: [PATCH 4/5] New package: 66-void-20220424
---
srcpkgs/66-void/files/hostname | 1 +
srcpkgs/66-void/files/locale.conf | 2 +
srcpkgs/66-void/files/os-release | 4 +
.../0001-Makefile-adapt-for-66-void.patch | 73 +++++++++++++++++++
srcpkgs/66-void/template | 44 +++++++++++
5 files changed, 124 insertions(+)
create mode 100644 srcpkgs/66-void/files/hostname
create mode 100644 srcpkgs/66-void/files/locale.conf
create mode 100644 srcpkgs/66-void/files/os-release
create mode 100644 srcpkgs/66-void/patches/0001-Makefile-adapt-for-66-void.patch
create mode 100644 srcpkgs/66-void/template
diff --git a/srcpkgs/66-void/files/hostname b/srcpkgs/66-void/files/hostname
new file mode 100644
index 000000000000..916d471cd4c9
--- /dev/null
+++ b/srcpkgs/66-void/files/hostname
@@ -0,0 +1 @@
+void-live
diff --git a/srcpkgs/66-void/files/locale.conf b/srcpkgs/66-void/files/locale.conf
new file mode 100644
index 000000000000..abfaa52b3b93
--- /dev/null
+++ b/srcpkgs/66-void/files/locale.conf
@@ -0,0 +1,2 @@
+LANG=en_US.UTF-8
+LC_COLLATE=C
diff --git a/srcpkgs/66-void/files/os-release b/srcpkgs/66-void/files/os-release
new file mode 100644
index 000000000000..12dcabd1f3e6
--- /dev/null
+++ b/srcpkgs/66-void/files/os-release
@@ -0,0 +1,4 @@
+NAME="void"
+ID="void"
+DISTRIB_ID="void"
+PRETTY_NAME="void"
diff --git a/srcpkgs/66-void/patches/0001-Makefile-adapt-for-66-void.patch b/srcpkgs/66-void/patches/0001-Makefile-adapt-for-66-void.patch
new file mode 100644
index 000000000000..58de3adb8d2f
--- /dev/null
+++ b/srcpkgs/66-void/patches/0001-Makefile-adapt-for-66-void.patch
@@ -0,0 +1,73 @@
+From b2d94d4a2505ab2b6f07b96e9373331f64489a0c Mon Sep 17 00:00:00 2001
+From: mobinmob <mobinmob@disroot.org>
+Date: Sat, 8 Oct 2022 08:21:14 +0300
+Subject: [PATCH] Makefile: adapt for 66-void.
+
+---
+ Makefile | 34 +++++++++-------------------------
+ 1 file changed, 9 insertions(+), 25 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 08117ab..3ec70e2 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,5 +1,5 @@
+-PREFIX ?= /usr/local
+-SCRIPTS= 1 2 3 ctrlaltdel
++DESTDIR ?=
++PREFIX ?= /usr/local
+
+ all:
+ $(CC) $(CFLAGS) halt.c -o halt $(LDFLAGS)
+@@ -8,41 +8,25 @@ all:
+ $(CC) $(CFLAGS) seedrng.c -o seedrng $(LDFLAGS)
+
+ install:
+- install -d ${DESTDIR}/${PREFIX}/sbin
+- install -m755 halt ${DESTDIR}/${PREFIX}/sbin
+- install -m755 pause ${DESTDIR}/${PREFIX}/sbin
+- install -m755 vlogger ${DESTDIR}/${PREFIX}/sbin
+- install -m755 shutdown ${DESTDIR}/${PREFIX}/sbin/shutdown
+- install -m755 modules-load ${DESTDIR}/${PREFIX}/sbin/modules-load
+- install -m755 seedrng ${DESTDIR}/${PREFIX}/sbin/seedrng
+- install -m755 zzz ${DESTDIR}/${PREFIX}/sbin
+- ln -sf zzz ${DESTDIR}/${PREFIX}/sbin/ZZZ
+- ln -sf halt ${DESTDIR}/${PREFIX}/sbin/poweroff
+- ln -sf halt ${DESTDIR}/${PREFIX}/sbin/reboot
++ install -d ${DESTDIR}/${PREFIX}/bin
++ install -m755 pause ${DESTDIR}/${PREFIX}/bin
++ install -m755 vlogger ${DESTDIR}/${PREFIX}/bin
++ install -m755 modules-load ${DESTDIR}/${PREFIX}/bin/modules-load
++ install -m755 seedrng ${DESTDIR}/${PREFIX}/bin/seedrng
++ install -m755 zzz ${DESTDIR}/${PREFIX}/bin
++ ln -sf zzz ${DESTDIR}/${PREFIX}/bin/ZZZ
+ install -d ${DESTDIR}/${PREFIX}/share/man/man1
+ install -m644 pause.1 ${DESTDIR}/${PREFIX}/share/man/man1
+ install -d ${DESTDIR}/${PREFIX}/share/man/man8
+ install -m644 zzz.8 ${DESTDIR}/${PREFIX}/share/man/man8
+- install -m644 shutdown.8 ${DESTDIR}/${PREFIX}/share/man/man8
+- install -m644 halt.8 ${DESTDIR}/${PREFIX}/share/man/man8
+ install -m644 modules-load.8 ${DESTDIR}/${PREFIX}/share/man/man8
+ install -m644 vlogger.8 ${DESTDIR}/${PREFIX}/share/man/man8
+- ln -sf halt.8 ${DESTDIR}/${PREFIX}/share/man/man8/poweroff.8
+- ln -sf halt.8 ${DESTDIR}/${PREFIX}/share/man/man8/reboot.8
+ install -d ${DESTDIR}/etc/sv
+ install -d ${DESTDIR}/etc/runit/runsvdir
+- install -d ${DESTDIR}/etc/runit/core-services
+- install -m644 core-services/*.sh ${DESTDIR}/etc/runit/core-services
+- install -m755 ${SCRIPTS} ${DESTDIR}/etc/runit
+- install -m644 functions $(DESTDIR)/etc/runit
+- install -m644 crypt.awk ${DESTDIR}/etc/runit
+ install -m644 rc.conf ${DESTDIR}/etc
+ install -m755 rc.local ${DESTDIR}/etc
+- install -m755 rc.shutdown ${DESTDIR}/etc
+ install -d ${DESTDIR}/${PREFIX}/lib/dracut/dracut.conf.d
+ install -m644 dracut/*.conf ${DESTDIR}/${PREFIX}/lib/dracut/dracut.conf.d
+- ln -sf /run/runit/reboot ${DESTDIR}/etc/runit/
+- ln -sf /run/runit/stopit ${DESTDIR}/etc/runit/
+ cp -R --no-dereference --preserve=mode,links -v runsvdir/* ${DESTDIR}/etc/runit/runsvdir/
+ cp -R --no-dereference --preserve=mode,links -v services/* ${DESTDIR}/etc/sv/
+
+--
+2.38.0
+
diff --git a/srcpkgs/66-void/template b/srcpkgs/66-void/template
new file mode 100644
index 000000000000..ceb9c44191cb
--- /dev/null
+++ b/srcpkgs/66-void/template
@@ -0,0 +1,44 @@
+# Template file for '66-void'
+# Based heavily on the runit-void package and reusing
+# the void-runit repository.
+pkgname=66-void
+# This the not a released version but the date of the
+# last commit at this time.
+version=20220424
+revision=1
+# This the the last commit hash at this time.
+_void_runit_version=28f849335eed5db4787d3b7dc342dd4066b7183f
+wrksrc="void-runit-${_void_runit_version}"
+build_style=gnu-makefile
+short_desc="Void Linux base package, adapted for 66"
+maintainer="mobinmob <mobinmob@disroot.org>"
+license="CC0-1.0"
+homepage="https://github.com/void-linux/void-runit"
+# distfiles="https://github.com/void-linux/void-runit/archive/${_void_runit_version}.tar.gz"
+distfiles="https://github.com/void-linux/void-runit/archive/${_void_runit_version}.tar.gz"
+checksum=43654b6c9428cd1d2ab1fc71f5af986be3f09b947b37548115ab2376a9b574e1
+replaces="runit-void>=0"
+
+make_dirs="
+ /etc/runit/core-services 755 root root
+ /etc/zzz.d/suspend 0755 root root
+ /etc/zzz.d/resume 0755 root root"
+
+depends="boot-66serv"
+conf_files="
+ /etc/hostname
+ /etc/locale.conf
+ /etc/rc.conf
+ /etc/rc.local"
+
+post_install() {
+ vconf ${FILESDIR}/hostname
+ vconf ${FILESDIR}/os-release
+ vconf ${FILESDIR}/locale.conf
+ # Create symlinks for init and init utilities
+ ln -s /usr/bin/66 "${DESTDIR}"/usr/bin/init
+ for i in reboot poweroff halt shutdown;
+ do
+ ln -s /etc/66/${i} "${DESTDIR}"/usr/bin/${i}
+ done
+}
From 2a13ff0c58682ff70e487494ed770c8c50a26b92 Mon Sep 17 00:00:00 2001
From: mobinmob <mobinmob@disroot.org>
Date: Sun, 5 Feb 2023 20:40:48 +0200
Subject: [PATCH 5/5] New package: base-system-66-0.114
---
srcpkgs/base-system-66/template | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 srcpkgs/base-system-66/template
diff --git a/srcpkgs/base-system-66/template b/srcpkgs/base-system-66/template
new file mode 100644
index 000000000000..313a528edee4
--- /dev/null
+++ b/srcpkgs/base-system-66/template
@@ -0,0 +1,29 @@
+# Template file for 'base-system-66'
+pkgname=base-system-66
+version=0.114
+revision=1
+build_style=meta
+short_desc="Void Linux base system meta package"
+maintainer="mobinmob <mobinmob@disroot.org>"
+# A minor modification of the base-system template
+# maintained by Enno Boland <gottox@voidlinux.org>
+license="Public Domain"
+homepage="https://codeberg.org/mobinmob/66-voidlinux"
+replaces="base-system>=0"
+
+depends="
+ base-files>=0.77 ncurses coreutils findutils diffutils libgcc
+ dash bash grep gzip file sed gawk less util-linux which tar man-pages
+ mdocml>=1.13.3 shadow e2fsprogs btrfs-progs xfsprogs f2fs-tools dosfstools
+ procps-ng tzdata pciutils usbutils iana-etc openssh dhcpcd
+ kbd iproute2 iputils iw wpa_supplicant xbps nvi sudo wifi-firmware
+ void-artwork traceroute ethtool kmod acpid eudev 66-void removed-packages"
+
+case "$XBPS_TARGET_MACHINE" in
+ *-musl) depends+=" musl";;
+ *) depends+=" glibc-locales";;
+esac
+
+case "$XBPS_TARGET_MACHINE" in
+ i686*|x86_64*|ppc*) depends+=" linux";;
+esac
next prev parent reply other threads:[~2023-02-05 18:41 UTC|newest]
Thread overview: 173+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 19:14 [PR PATCH] [WIP] New package: boot-66serv-2.2.0 mobinmob
2020-10-19 19:16 ` mobinmob
2020-10-19 19:18 ` [PR PATCH] [Updated] " mobinmob
2020-11-08 15:10 ` [PR PATCH] [Updated] [WIP] New package: boot-66serv-2.2.1 mobinmob
2020-11-08 15:24 ` mobinmob
2020-11-08 15:26 ` mobinmob
2020-11-08 15:27 ` mobinmob
2020-11-08 15:31 ` mobinmob
2020-11-23 23:55 ` [PR PATCH] [Updated] " mobinmob
2020-11-23 23:58 ` mobinmob
2020-11-25 19:25 ` [PR PATCH] [Updated] " mobinmob
2020-11-25 19:29 ` mobinmob
2020-12-15 21:54 ` mobinmob
2020-12-15 22:01 ` mobinmob
2020-12-28 21:58 ` [PR PATCH] [Updated] " mobinmob
2020-12-28 22:00 ` mobinmob
2020-12-29 7:47 ` travankor
2020-12-29 9:54 ` mobinmob
2020-12-29 9:55 ` mobinmob
2020-12-29 10:03 ` mobinmob
2021-01-03 14:24 ` [PR PATCH] [Updated] " mobinmob
2021-01-03 14:30 ` mobinmob
2021-01-03 14:31 ` mobinmob
2021-01-03 14:32 ` mobinmob
2021-01-03 14:32 ` mobinmob
2021-01-03 14:35 ` mobinmob
2021-01-03 15:14 ` [PR PATCH] [Updated] " mobinmob
2021-01-23 20:07 ` mobinmob
2021-01-23 20:14 ` mobinmob
2021-01-23 20:17 ` mobinmob
2021-02-01 17:22 ` [PR PATCH] [Updated] [WIP] New package: boot-66serv-2.3.0 mobinmob
2021-02-01 17:24 ` mobinmob
2021-02-03 0:14 ` [PR PATCH] [Updated] " mobinmob
2021-02-03 0:16 ` mobinmob
2021-02-03 0:25 ` mobinmob
2021-02-04 19:48 ` [PR PATCH] [Updated] " mobinmob
2021-02-04 19:50 ` mobinmob
2021-02-04 20:01 ` mobinmob
2021-02-04 20:08 ` [PR REVIEW] " ericonr
2021-02-04 20:08 ` ericonr
2021-02-04 20:08 ` ericonr
2021-02-04 20:08 ` ericonr
2021-02-04 20:12 ` mobinmob
2021-02-04 20:16 ` mobinmob
2021-02-04 20:17 ` mobinmob
2021-02-04 20:19 ` mobinmob
2021-02-04 20:20 ` [PR PATCH] [Updated] " mobinmob
2021-02-04 20:20 ` [PR REVIEW] " mobinmob
2021-02-04 20:21 ` mobinmob
2021-02-04 20:23 ` [PR PATCH] [Updated] " mobinmob
2021-02-04 20:24 ` [PR REVIEW] " mobinmob
2021-02-04 23:24 ` [PR PATCH] [Updated] " mobinmob
2021-02-04 23:52 ` mobinmob
2021-02-06 0:46 ` mobinmob
2021-02-06 0:47 ` mobinmob
2021-02-06 0:55 ` mobinmob
2021-02-06 1:01 ` mobinmob
2021-02-06 1:08 ` mobinmob
2021-02-08 11:13 ` [PR PATCH] [Updated] " mobinmob
2021-02-08 17:06 ` mobinmob
2021-02-14 18:11 ` mobinmob
2021-02-14 22:54 ` [PR PATCH] [Updated] " mobinmob
2021-02-14 22:59 ` mobinmob
2021-02-14 22:59 ` mobinmob
2021-02-14 23:01 ` mobinmob
2021-02-16 15:14 ` [PR PATCH] [Updated] " mobinmob
2021-02-27 23:24 ` mobinmob
2021-02-27 23:31 ` mobinmob
2021-02-27 23:31 ` mobinmob
2021-02-27 23:31 ` mobinmob
2021-03-02 21:50 ` [PR PATCH] [Updated] " mobinmob
2021-03-03 20:24 ` mobinmob
2021-03-03 22:37 ` mobinmob
2021-03-03 22:39 ` mobinmob
2021-03-05 17:56 ` mobinmob
2021-03-05 17:57 ` mobinmob
2021-03-05 17:58 ` mobinmob
2021-03-05 18:01 ` mobinmob
2021-03-16 19:19 ` [PR PATCH] [Updated] " mobinmob
2021-03-16 19:22 ` mobinmob
2021-03-21 15:22 ` [PR PATCH] [Updated] " mobinmob
2021-03-22 20:49 ` mobinmob
2021-03-22 20:55 ` mobinmob
2021-05-28 20:24 ` [PR PATCH] [Updated] " mobinmob
2021-05-28 20:30 ` [WIP] New package: boot-66serv-2.3.1 mobinmob
2021-05-29 23:13 ` paper42
2021-05-30 14:14 ` mobinmob
2021-05-30 14:16 ` mobinmob
2021-05-30 14:24 ` mobinmob
2021-07-13 21:35 ` [PR PATCH] [Updated] " mobinmob
2021-07-13 21:36 ` mobinmob
2021-07-13 21:43 ` [PR PATCH] [Updated] " mobinmob
2021-09-15 13:07 ` mobinmob
2021-09-15 13:09 ` mobinmob
2021-09-15 13:10 ` mobinmob
2021-09-15 13:15 ` [PR PATCH] [Updated] " mobinmob
2021-09-15 19:19 ` [PR PATCH] [Updated] [WIP] New package: boot-66serv-2.4.0 mobinmob
2021-09-15 19:23 ` mobinmob
2021-11-19 18:01 ` [PR PATCH] [Updated] " mobinmob
2021-11-19 18:04 ` mobinmob
2021-11-24 2:09 ` thegarlynch
2021-11-24 5:39 ` mobinmob
2021-11-24 13:51 ` mobinmob
2022-02-20 10:37 ` [PR PATCH] [Updated] " mobinmob
2022-02-20 10:37 ` mobinmob
2022-02-20 10:41 ` mobinmob
2022-02-20 19:29 ` mobinmob
2022-02-21 17:51 ` [PR PATCH] [Updated] " mobinmob
2022-02-21 17:56 ` mobinmob
2022-02-22 14:31 ` mobinmob
2022-03-11 10:07 ` thegarlynch
2022-03-12 9:30 ` mobinmob
2022-03-12 9:30 ` mobinmob
2022-03-12 9:34 ` mobinmob
2022-03-12 9:37 ` mobinmob
2022-05-14 10:49 ` [PR PATCH] [Updated] " mobinmob
2022-05-14 10:49 ` mobinmob
2022-05-14 10:52 ` [PR PATCH] [Updated] " mobinmob
2022-05-14 10:53 ` mobinmob
2022-05-14 13:02 ` mobinmob
2022-05-14 13:02 ` mobinmob
2022-05-15 13:44 ` mobinmob
2022-05-15 13:45 ` mobinmob
2022-06-18 10:43 ` mobinmob
2022-06-18 10:43 ` mobinmob
2022-08-22 15:18 ` NymanMatthias
2022-08-22 15:18 ` NymanMatthias
2022-08-22 16:11 ` mobinmob
2022-10-01 15:49 ` mobinmob
2022-10-16 13:08 ` [PR PATCH] [Updated] [WIP] New package: boot-66serv-2.4.1 mobinmob
2022-10-16 13:11 ` mobinmob
2022-10-16 13:19 ` [PR PATCH] [Updated] " mobinmob
2022-10-16 13:21 ` mobinmob
2022-10-16 14:16 ` mobinmob
2022-10-16 22:27 ` NymanMatthias
2022-10-17 3:00 ` mobinmob
2022-10-17 3:05 ` mobinmob
2022-10-17 3:23 ` mobinmob
2022-10-17 12:54 ` mobinmob
2023-01-16 1:58 ` github-actions
2023-01-18 17:05 ` mobinmob
2023-01-18 17:07 ` mobinmob
2023-02-05 18:41 ` mobinmob [this message]
2023-02-05 19:06 ` mobinmob
2023-02-05 19:08 ` mobinmob
2023-03-11 18:37 ` [PR PATCH] [Updated] " mobinmob
2023-03-11 18:53 ` mobinmob
2023-03-11 18:57 ` mobinmob
2023-03-11 18:58 ` mobinmob
2023-03-11 18:58 ` mobinmob
2023-03-11 18:59 ` mobinmob
2023-03-11 19:00 ` mobinmob
2023-04-12 16:33 ` sonnysighedup
2023-04-12 16:45 ` mobinmob
2023-04-12 16:46 ` mobinmob
2023-04-12 16:48 ` mobinmob
2023-04-12 17:35 ` mobinmob
2023-04-12 17:50 ` sonnysighedup
2023-04-12 17:59 ` mobinmob
2023-04-12 17:59 ` mobinmob
2023-07-12 2:06 ` github-actions
2023-07-27 1:46 ` [PR PATCH] [Closed]: " github-actions
2023-07-29 17:42 ` mobinmob
2023-07-29 17:43 ` mobinmob
2023-07-29 17:43 ` mobinmob
2023-08-05 7:55 ` mobinmob
2023-08-05 8:08 ` mobinmob
2023-08-05 9:08 ` mobinmob
2023-08-06 18:55 ` mobinmob
2023-08-06 19:15 ` mobinmob
2023-08-13 14:46 ` mobinmob
2023-08-14 8:07 ` mobinmob
2023-08-14 8:07 ` mobinmob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230205184121.MOS3qWr8TNSEI0gG6lFUjqkFUyx2FlcPB23NRfFuhDk@z \
--to=mobinmob@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).