* Re: Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
@ 2023-10-17 15:18 ` dkwo
2023-10-17 20:39 ` [PR PATCH] [Updated] " tornaria
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: dkwo @ 2023-10-17 15:18 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 253 bytes --]
New comment by dkwo on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#issuecomment-1766634620
Comment:
Great! How can I test these natively? is it ok to wait until they're in the repository, and then rebuild sagemath?
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
2023-10-17 15:18 ` dkwo
@ 2023-10-17 20:39 ` tornaria
2023-10-17 20:45 ` tornaria
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-17 20:39 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1693 bytes --]
There is an updated pull request by tornaria against master on the void-packages repository
https://github.com/tornaria/void-packages cysignals
https://github.com/void-linux/void-packages/pull/46738
Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
Summary of changes:
- python3-cysignals: update to 1.11.4, fix cross-build.
- python3-cypari2: update to 2.1.4, fix cross-build.
- python3-fpylll: fix check and cross-build.
- python3-primecountpy: fix cross-build.
- python3-pplpy: update to 0.8.9, fix cross-build.
#### Testing the changes
- I tested the changes in this PR: **briefly**
Note that pplpy is still building with Cython0.29 as the cython version has to match the one used to build sagemath. We'll switch to Cython 3 when sagemath 10.2 is released.
@dkwo some cross pkgs for you.
<!--
#### New package
- This new package conforms to the [package requirements](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#package-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please add ci skip tag as described in
https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/46738.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-cysignals-46738.patch --]
[-- Type: text/x-diff, Size: 27941 bytes --]
From 0e53ca5039369d408f8d46c099bb163a59095a37 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Sun, 8 Oct 2023 19:40:27 -0300
Subject: [PATCH 1/6] python3-cysignals: update to 1.11.4, fix cross-build.
---
.../python3-cysignals/patches/fix-cross.patch | 23 +++++++++++++++++++
srcpkgs/python3-cysignals/template | 22 ++++++++++++++----
2 files changed, 40 insertions(+), 5 deletions(-)
create mode 100644 srcpkgs/python3-cysignals/patches/fix-cross.patch
diff --git a/srcpkgs/python3-cysignals/patches/fix-cross.patch b/srcpkgs/python3-cysignals/patches/fix-cross.patch
new file mode 100644
index 0000000000000..8d08c516e0eb1
--- /dev/null
+++ b/srcpkgs/python3-cysignals/patches/fix-cross.patch
@@ -0,0 +1,23 @@
+diff --git a/configure.ac b/configure.ac
+index d0624ec..f5a6786 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -48,7 +48,7 @@ fi
+ AC_MSG_CHECKING([for emms instruction])
+ # We add the "leal" instruction to reduce false positives in case some
+ # non-x86 architecture also has an "emms" instruction.
+-AC_RUN_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
++AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
+ dnl YES
+ [AC_MSG_RESULT([yes])]
+ AC_DEFINE(HAVE_EMMS, 1, [Define to 1 if your processor understands the "emms" instruction.])
+@@ -84,6 +84,9 @@ AC_RUN_IFELSE([AC_LANG_PROGRAM(
+ ,
+ dnl NO
+ [AC_MSG_RESULT([no])]
++ ,
++ [AC_MSG_RESULT([cross, assume yes])]
++ sigsetjmp=yes
+ )
+
+ AC_MSG_CHECKING([for GNU libc])
diff --git a/srcpkgs/python3-cysignals/template b/srcpkgs/python3-cysignals/template
index da80babe1fcb1..492ae7ba59d22 100644
--- a/srcpkgs/python3-cysignals/template
+++ b/srcpkgs/python3-cysignals/template
@@ -1,18 +1,30 @@
# Template file for 'python3-cysignals'
pkgname=python3-cysignals
-version=1.11.3
+version=1.11.4
revision=1
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython autoconf"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython"
makedepends="python3-devel pari-devel"
depends="python3"
short_desc="Interrupt and signal handling for Cython"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="LGPL-3.0-or-later"
homepage="https://github.com/sagemath/cysignals"
+changelog="https://github.com/sagemath/cysignals/releases"
distfiles="${PYPI_SITE}/c/cysignals/cysignals-${version}.tar.gz"
-checksum=c2c01f666e5904948952a2250548d8c36ccedd640383791feacf26ea2b958365
-nocross=yes # runs binaries built for target
+checksum=0f1e321e55a07f901c86a36a1e4497f6ff9dfe700681d0130a38c36e4eb238c3
+
+# run autoconf after patching configure.ac
+hostmakedepends+=" autoconf"
+post_patch() {
+ autoconf
+}
+
+do_configure() {
+ # set up configure_args with common settings as in build-style=gnu-configure
+ build_style=gnu-configure source /void-packages/common/environment/configure/gnu-configure-args.sh
+ ./configure ${configure_args}
+}
do_check() {
make check
From 1dba2fcda09b0d8a13299485611dd2b9fe623806 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 16:47:38 -0300
Subject: [PATCH 2/6] python3-cypari2: update to 2.1.4, fix cross-build.
---
.../patches/cython3-legacy.patch | 32 ---
.../python3-cypari2/patches/python312.patch | 214 ------------------
srcpkgs/python3-cypari2/template | 14 +-
3 files changed, 8 insertions(+), 252 deletions(-)
delete mode 100644 srcpkgs/python3-cypari2/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-cypari2/patches/python312.patch
diff --git a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch b/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
deleted file mode 100644
index 41392fe80d736..0000000000000
--- a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-commit 8ef356a4eb936c37f55a5c501f3a955e6740c0c5
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 19:45:23 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/cypari2/gen.pyx b/cypari2/gen.pyx
-index 247b1ad..75050a0 100644
---- a/cypari2/gen.pyx
-+++ b/cypari2/gen.pyx
-@@ -329,7 +329,7 @@ cdef class Gen(Gen_base):
- >>> pari = Pari()
- >>> L = pari("vector(10,i,i^2)")
- >>> L.__iter__()
-- <generator object at ...>
-+ <...generator object at ...>
- >>> [x for x in L]
- [1, 4, 9, 16, 25, 36, 49, 64, 81, 100]
- >>> list(L)
-diff --git a/setup.py b/setup.py
-index 2188711..455337f 100755
---- a/setup.py
-+++ b/setup.py
-@@ -36,6 +36,8 @@ class build_ext(_build_ext):
- "binding": True,
- "cdivision": True,
- "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ "c_api_binop_methods": True,
- }
-
- _build_ext.finalize_options(self)
diff --git a/srcpkgs/python3-cypari2/patches/python312.patch b/srcpkgs/python3-cypari2/patches/python312.patch
deleted file mode 100644
index 255cfb9f1fb75..0000000000000
--- a/srcpkgs/python3-cypari2/patches/python312.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From 0c7e9a1749d67ef1b880283112e968f644e24341 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 07:47:14 -0300
-Subject: [PATCH] Support python 3.12
-
----
- cypari2/Py_SET_SIZE.h | 8 ----
- cypari2/convert.pyx | 27 ++++--------
- cypari2/pycore_long.h | 98 +++++++++++++++++++++++++++++++++++++++++
- cypari2/pycore_long.pxd | 9 ++++
- 4 files changed, 116 insertions(+), 26 deletions(-)
- delete mode 100644 cypari2/Py_SET_SIZE.h
- create mode 100644 cypari2/pycore_long.h
- create mode 100644 cypari2/pycore_long.pxd
-
-diff --git a/cypari2/Py_SET_SIZE.h b/cypari2/Py_SET_SIZE.h
-deleted file mode 100644
-index 5f18ab0..0000000
---- a/cypari2/Py_SET_SIZE.h
-+++ /dev/null
-@@ -1,8 +0,0 @@
--#include "Python.h"
--
--#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
--// The function Py_SET_SIZE is defined starting with python 3.9.
--void Py_SET_SIZE(PyVarObject *o, Py_ssize_t size){
-- Py_SIZE(o) = size;
--}
--#endif
-diff --git a/cypari2/convert.pyx b/cypari2/convert.pyx
-index 7c2ed24..8d39c3c 100644
---- a/cypari2/convert.pyx
-+++ b/cypari2/convert.pyx
-@@ -54,14 +54,8 @@ from libc.math cimport INFINITY
- from .paridecl cimport *
- from .stack cimport new_gen, reset_avma
- from .string_utils cimport to_string, to_bytes
--
--cdef extern from *:
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
--cdef extern from "Py_SET_SIZE.h":
-- void Py_SET_SIZE(py_long o, Py_ssize_t size)
--
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
-
- ########################################################################
- # Conversion PARI -> Python
-@@ -424,7 +418,7 @@ cdef PyLong_FromINT(GEN g):
- cdef Py_ssize_t sizedigits_final = 0
-
- cdef py_long x = _PyLong_New(sizedigits)
-- cdef digit* D = x.ob_digit
-+ cdef digit* D = ob_digit(x)
-
- cdef digit d
- cdef ulong w
-@@ -452,10 +446,7 @@ cdef PyLong_FromINT(GEN g):
- sizedigits_final = i+1
-
- # Set correct size
-- if signe(g) > 0:
-- Py_SET_SIZE(x, sizedigits_final)
-- else:
-- Py_SET_SIZE(x, -sizedigits_final)
-+ _PyLong_SetSignAndDigitCount(x, signe(g), sizedigits_final)
-
- return x
-
-@@ -465,18 +456,18 @@ cdef PyLong_FromINT(GEN g):
- ########################################################################
-
- cdef GEN PyLong_AS_GEN(py_long x):
-- cdef const digit* D = x.ob_digit
-+ cdef const digit* D = ob_digit(x)
-
- # Size of the input
- cdef size_t sizedigits
- cdef long sgn
-- if Py_SIZE(x) == 0:
-+ if _PyLong_IsZero(x):
- return gen_0
-- elif Py_SIZE(x) > 0:
-- sizedigits = Py_SIZE(x)
-+ elif _PyLong_IsPositive(x):
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(1)
- else:
-- sizedigits = -Py_SIZE(x)
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(-1)
-
- # Size of the output, in bits and in words
-diff --git a/cypari2/pycore_long.h b/cypari2/pycore_long.h
-new file mode 100644
-index 0000000..ff1a73d
---- /dev/null
-+++ b/cypari2/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/cypari2/pycore_long.pxd b/cypari2/pycore_long.pxd
-new file mode 100644
-index 0000000..41de637
---- /dev/null
-+++ b/cypari2/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
diff --git a/srcpkgs/python3-cypari2/template b/srcpkgs/python3-cypari2/template
index c93052ba52bce..7e359e790f57e 100644
--- a/srcpkgs/python3-cypari2/template
+++ b/srcpkgs/python3-cypari2/template
@@ -1,18 +1,20 @@
# Template file for 'python3-cypari2'
pkgname=python3-cypari2
-version=2.1.3
-revision=5
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython pari perl"
-makedepends="python3-devel python3-cysignals pari-devel gmp-devel"
+version=2.1.4
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals pari perl"
+makedepends="python3-devel pari-devel gmp-devel"
depends="python3-cysignals"
checkdepends="${depends} python3-pytest"
short_desc="Python interface to the number theory library PARI/GP"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-2.0-or-later"
homepage="https://github.com/sagemath/cypari2"
+changelog="https://github.com/sagemath/cypari2/releases"
distfiles="https://github.com/sagemath/cypari2/archive/refs/tags/${version}.tar.gz"
-checksum=6f6f6ca2b2c2dbef4444727e8fb8652b090cfac4297ba959e94b3a91bbd86548
+checksum=95daf1a74275a35730bbca75144776c1bb0594dd90af82ebf7bf96bb1a52c3d8
do_check() {
# Please do not disable this custom check;
From 2e76054b2524e40c14bb0ff12621e41cc7da48c2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Tue, 17 Oct 2023 17:28:40 -0300
Subject: [PATCH 3/6] fplll: update to 5.4.5.
---
srcpkgs/fplll/template | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/fplll/template b/srcpkgs/fplll/template
index 9843d46828414..74fb8744ef51a 100644
--- a/srcpkgs/fplll/template
+++ b/srcpkgs/fplll/template
@@ -1,6 +1,6 @@
# Template file for 'fplll'
pkgname=fplll
-version=5.4.4
+version=5.4.5
revision=1
build_style=gnu-configure
makedepends="gmp-devel mpfr-devel"
@@ -10,7 +10,7 @@ license="LGPL-2.1-or-later"
homepage="https://github.com/fplll/fplll"
changelog="https://github.com/fplll/fplll/releases"
distfiles="https://github.com/fplll/fplll/releases/download/${version}/fplll-${version}.tar.gz"
-checksum=0fd9d378f04ff886d8864728baf5d90b8b0b82c1e541e92550644fb54f75691d
+checksum=76d3778f0326597ed7505bab19493a9bf6b73a5c5ca614e8fb82f42105c57d00
fplll-devel_package() {
depends="${makedepends} ${sourcepkg}>=${version}_${revision}"
From 2a84ba41e4ca7bb14dd87917836eb7b2bb166890 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 17:36:36 -0300
Subject: [PATCH 4/6] python3-fpylll: update to 0.6.0, fix cross-build.
---
.../patches/cython3-legacy.patch | 37 ---
.../python3-fpylll/patches/python312.patch | 213 ------------------
srcpkgs/python3-fpylll/template | 19 +-
3 files changed, 8 insertions(+), 261 deletions(-)
delete mode 100644 srcpkgs/python3-fpylll/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-fpylll/patches/python312.patch
diff --git a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch b/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
deleted file mode 100644
index 808c14e9c1b47..0000000000000
--- a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-commit b6e12c2b0648e84b26dcf0aac507a5b4d9dde301
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 20:38:01 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/setup.py b/setup.py
-index 274836f..8fc5af5 100755
---- a/setup.py
-+++ b/setup.py
-@@ -123,7 +123,12 @@ class build_ext(_build_ext, object):
- self.extensions,
- include_path=["src"],
- build_dir=self.cythonize_dir,
-- compiler_directives={"binding": True, "embedsignature": True, "language_level": 2},
-+ compiler_directives={
-+ "binding": True,
-+ "embedsignature": True,
-+ "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ },
- )
- super(build_ext, self).run()
-
-diff --git a/src/fpylll/fplll/enumeration_callback_helper.h b/src/fpylll/fplll/enumeration_callback_helper.h
-index c099430..706162f 100644
---- a/src/fpylll/fplll/enumeration_callback_helper.h
-+++ b/src/fpylll/fplll/enumeration_callback_helper.h
-@@ -5,7 +5,7 @@
- #include <Python.h>
- #include <fplll/fplll.h>
-
--extern "C" {
-+extern "C++" {
- bool evaluator_callback_call_obj(PyObject *obj, int n, double *new_sol_coord);
- }
-
diff --git a/srcpkgs/python3-fpylll/patches/python312.patch b/srcpkgs/python3-fpylll/patches/python312.patch
deleted file mode 100644
index d2947a0622a36..0000000000000
--- a/srcpkgs/python3-fpylll/patches/python312.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 4ed789aac4eeb1c109cbeb4822fac0b5ff76bd37 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 08:59:00 -0300
-Subject: [PATCH] Support python 3.12
-
----
- src/fpylll/gmp/pycore_long.h | 98 ++++++++++++++++++++++++++++++++++
- src/fpylll/gmp/pycore_long.pxd | 9 ++++
- src/fpylll/gmp/pylong.pxd | 17 +-----
- src/fpylll/gmp/pylong.pyx | 22 ++++----
- 4 files changed, 119 insertions(+), 27 deletions(-)
- create mode 100644 src/fpylll/gmp/pycore_long.h
- create mode 100644 src/fpylll/gmp/pycore_long.pxd
-
-diff --git a/src/fpylll/gmp/pycore_long.h b/src/fpylll/gmp/pycore_long.h
-new file mode 100644
-index 00000000..ff1a73d0
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/src/fpylll/gmp/pycore_long.pxd b/src/fpylll/gmp/pycore_long.pxd
-new file mode 100644
-index 00000000..41de637f
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
-diff --git a/src/fpylll/gmp/pylong.pxd b/src/fpylll/gmp/pylong.pxd
-index 4ec3f47c..c64bcb6a 100644
---- a/src/fpylll/gmp/pylong.pxd
-+++ b/src/fpylll/gmp/pylong.pxd
-@@ -3,23 +3,10 @@
- Various functions to deal with conversion mpz <-> Python int/long
- """
-
--cdef extern from "Python.h":
-- cdef _PyLong_New(Py_ssize_t s)
-- cdef long PyLong_SHIFT
-- ctypedef unsigned int digit
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
-- ctypedef struct PyObject:
-- pass
--
-- ctypedef struct PyVarObject:
-- PyObject ob_base
-- Py_ssize_t ob_size
--
-+from cpython.longintrepr cimport py_long
- from fpylll.gmp.types cimport *
-
- cdef mpz_get_pylong(mpz_srcptr z)
- cdef mpz_get_pyintlong(mpz_srcptr z)
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1
- cdef Py_hash_t mpz_pythonhash(mpz_srcptr z)
-diff --git a/src/fpylll/gmp/pylong.pyx b/src/fpylll/gmp/pylong.pyx
-index 4b47146f..885d4efe 100644
---- a/src/fpylll/gmp/pylong.pyx
-+++ b/src/fpylll/gmp/pylong.pyx
-@@ -28,6 +28,9 @@ AUTHORS:
-
- from cpython.int cimport PyInt_FromLong
- from cpython.long cimport PyLong_CheckExact, PyLong_FromLong
-+from cpython.longintrepr cimport _PyLong_New, digit, PyLong_SHIFT
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
- from .mpz cimport *
-
- # Unused bits in every PyLong digit
-@@ -40,11 +43,9 @@ cdef mpz_get_pylong_large(mpz_srcptr z):
- """
- cdef size_t nbits = mpz_sizeinbase(z, 2)
- cdef size_t pylong_size = (nbits + PyLong_SHIFT - 1) // PyLong_SHIFT
-- L = _PyLong_New(pylong_size)
-- mpz_export((<PyLongObject*>L).ob_digit, NULL,
-- -1, sizeof(digit), 0, PyLong_nails, z)
-- if mpz_sgn(z) < 0:
-- (<PyVarObject*>L).ob_size = -(<PyVarObject*>L).ob_size
-+ cdef py_long L = _PyLong_New(pylong_size)
-+ mpz_export(ob_digit(L), NULL, -1, sizeof(digit), 0, PyLong_nails, z)
-+ _PyLong_SetSignAndDigitCount(L, mpz_sgn(z), pylong_size)
- return L
-
-
-@@ -67,16 +68,13 @@ cdef mpz_get_pyintlong(mpz_srcptr z):
- return mpz_get_pylong_large(z)
-
-
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1:
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1:
- """
- Convert a Python ``long`` `L` to an ``mpz``.
- """
-- cdef Py_ssize_t pylong_size = (<PyVarObject*>L).ob_size
-- if pylong_size < 0:
-- pylong_size = -pylong_size
-- mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails,
-- (<PyLongObject*>L).ob_digit)
-- if (<PyVarObject*>L).ob_size < 0:
-+ cdef Py_ssize_t pylong_size = _PyLong_DigitCount(L)
-+ mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails, ob_digit(L))
-+ if _PyLong_IsNegative(L):
- mpz_neg(z, z)
-
-
diff --git a/srcpkgs/python3-fpylll/template b/srcpkgs/python3-fpylll/template
index adff12e05ae3a..49bfd4ec0262a 100644
--- a/srcpkgs/python3-fpylll/template
+++ b/srcpkgs/python3-fpylll/template
@@ -1,11 +1,11 @@
# Template file for 'python3-fpylll'
pkgname=python3-fpylll
-version=0.5.9
-revision=3
-build_style=python3-module
-hostmakedepends="python3-Cython"
-makedepends="python3-cysignals python3-devel gmp-devel mpfr-devel fplll-devel
- pari-devel"
+version=0.6.0
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel gmp-devel mpfr-devel fplll-devel pari-devel"
depends="python3"
checkdepends="python3-pytest python3-numpy"
short_desc="Python wrapper to fplll (floating point lattice algorithms)"
@@ -14,13 +14,10 @@ license="GPL-2.0-or-later"
homepage="https://github.com/fplll/fpylll"
changelog="https://github.com/fplll/fpylll/releases"
distfiles="${PYPI_SITE}/f/fpylll/fpylll-${version}.tar.gz"
-checksum=be16d40fd94ddea771ccef44434732dfbf9a88cf15cd5f9020ec7a8197f16358
+checksum=623b4619b6da9fed9ba26b1ac7e8d8e620a06d2a5f7095ee67985c7160d3c3a4
+make_check_pre="env PY_IGNORE_IMPORTMISMATCH=1"
case $XBPS_TARGET_MACHINE in
# skip a test with numerical noise on 32 bit
i686*) make_check_args="-k not(averaged_simulate_prob)" ;;
esac
-
-pre_check() {
- export PY_IGNORE_IMPORTMISMATCH=1
-}
From 86f3567f0e4e0ef9a48682b082daabb39facdb97 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:11:02 -0300
Subject: [PATCH 5/6] python3-primecountpy: fix cross-build.
---
srcpkgs/python3-primecountpy/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/python3-primecountpy/template b/srcpkgs/python3-primecountpy/template
index 886e5d67c512a..eb3587dbb29c8 100644
--- a/srcpkgs/python3-primecountpy/template
+++ b/srcpkgs/python3-primecountpy/template
@@ -2,9 +2,10 @@
pkgname=python3-primecountpy
version=0.1.0
revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython"
-makedepends="python3-cysignals python3-devel primecount-devel pari-devel"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel primecount-devel pari-devel"
depends="python3"
short_desc="Python interface to the C++ library primecount"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
From e72a2ed23e528554073a61c7b7fd511e872be6c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:13:34 -0300
Subject: [PATCH 6/6] python3-pplpy: update to 0.8.9, fix cross-build.
---
.../patches/dont-depend-on-sphinx.patch | 7 +++++++
srcpkgs/python3-pplpy/template | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
create mode 100644 srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
diff --git a/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
new file mode 100644
index 0000000000000..65c5cf40d73bd
--- /dev/null
+++ b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
@@ -0,0 +1,7 @@
+--- a/pyproject.toml
++++ b/pyproject.toml
+@@ -1,3 +1,3 @@
+ [build-system]
+-requires = ["setuptools", "wheel", "Cython", "cysignals", "sphinx", "gmpy2>=2.1.0b1"]
++requires = ["setuptools", "wheel", "Cython", "cysignals", "gmpy2>=2.1.0b1"]
+ build-backend = "setuptools.build_meta"
diff --git a/srcpkgs/python3-pplpy/template b/srcpkgs/python3-pplpy/template
index fe6b08dba40f2..4a9c987b2a859 100644
--- a/srcpkgs/python3-pplpy/template
+++ b/srcpkgs/python3-pplpy/template
@@ -1,19 +1,20 @@
# Template file for 'python3-pplpy'
pkgname=python3-pplpy
-version=0.8.7
-revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython0.29"
-makedepends="python3-cysignals python3-gmpy2 python3-devel gmp-devel
- gmpxx-devel ppl-devel mpfr-devel libmpc-devel pari-devel"
+version=0.8.9
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython0.29
+ python3-cysignals python3-gmpy2"
+makedepends="python3-devel gmp-devel gmpxx-devel ppl-devel mpfr-devel
+ libmpc-devel pari-devel"
depends="python3"
short_desc="Python wrapper to the C++ Parma Polyhedra Library (PPL)"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-3.0-or-later"
-homepage="https://gitlab.com/videlec/pplpy"
-changelog="https://gitlab.com/videlec/pplpy/-/raw/master/CHANGES.txt"
+homepage="https://github.com/sagemath/pplpy"
+changelog="https://raw.githubusercontent.com/sagemath/pplpy/master/CHANGES.txt"
distfiles="${PYPI_SITE}/p/pplpy/pplpy-${version}.tar.gz"
-checksum=500bd0f4ae1a76956fae7fcba77854f5ec3e64fce76803664983763c3f2bd8bd
+checksum=db7a3b571d6ef053f75137975e947c3a1c1e45a30bab90eaf215b4e5cc15797e
do_check() {
PYTHONPATH=$(cd build/lib* && pwd) python3 setup.py test
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
2023-10-17 15:18 ` dkwo
2023-10-17 20:39 ` [PR PATCH] [Updated] " tornaria
@ 2023-10-17 20:45 ` tornaria
2023-10-17 20:57 ` [PR REVIEW] " classabbyamp
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-17 20:45 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 343 bytes --]
New comment by tornaria on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#issuecomment-1767150353
Comment:
> Great! How can I test these natively? is it ok to wait until they're in the repository, and then rebuild sagemath?
Sure, or else, build yourself in a x86_64 box, then install in your aarch64 box.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR REVIEW] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (2 preceding siblings ...)
2023-10-17 20:45 ` tornaria
@ 2023-10-17 20:57 ` classabbyamp
2023-10-17 23:15 ` tornaria
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: classabbyamp @ 2023-10-17 20:57 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 237 bytes --]
New review comment by classabbyamp on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#discussion_r1362761980
Comment:
put this up with the other hostmakedepends and this should probably be pre_configure
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR REVIEW] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (3 preceding siblings ...)
2023-10-17 20:57 ` [PR REVIEW] " classabbyamp
@ 2023-10-17 23:15 ` tornaria
2023-10-18 22:59 ` [PR PATCH] [Updated] " tornaria
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-17 23:15 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 637 bytes --]
New review comment by tornaria on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#discussion_r1362914837
Comment:
I put this in a block by itself since I hope it will be upstreamed soon and I'll just remove this, but using the other hostmakedepends is ok.
About where to run autoconf, I tend to think it belongs more to the patch step than to the configure step. I.e. I only need to run it once after patching so I consider it part of patch (e.g. upstream ships configure included in the tarball, so patch+autoconf is creating a source dir similar to what upstream ships).
No big deal either way.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (4 preceding siblings ...)
2023-10-17 23:15 ` tornaria
@ 2023-10-18 22:59 ` tornaria
2023-10-19 1:53 ` tornaria
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-18 22:59 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]
There is an updated pull request by tornaria against master on the void-packages repository
https://github.com/tornaria/void-packages cysignals
https://github.com/void-linux/void-packages/pull/46738
Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
Summary of changes:
- python3-cysignals: update to 1.11.4, fix cross-build.
- python3-cypari2: update to 2.1.4, fix cross-build.
- fplll: update to 5.4.5.
- python3-fpylll: update to 0.6.0, fix cross-build.
- python3-primecountpy: fix cross-build.
- python3-pplpy: update to 0.8.9, fix cross-build.
#### Testing the changes
- I tested the changes in this PR: **briefly**
Note that pplpy is still building with Cython0.29 as the cython version has to match the one used to build sagemath. We'll switch to Cython 3 when sagemath 10.2 is released.
@dkwo some cross pkgs for you.
<!--
#### New package
- This new package conforms to the [package requirements](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#package-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please add ci skip tag as described in
https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/46738.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-cysignals-46738.patch --]
[-- Type: text/x-diff, Size: 29886 bytes --]
From 0e53ca5039369d408f8d46c099bb163a59095a37 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Sun, 8 Oct 2023 19:40:27 -0300
Subject: [PATCH 1/7] python3-cysignals: update to 1.11.4, fix cross-build.
---
.../python3-cysignals/patches/fix-cross.patch | 23 +++++++++++++++++++
srcpkgs/python3-cysignals/template | 22 ++++++++++++++----
2 files changed, 40 insertions(+), 5 deletions(-)
create mode 100644 srcpkgs/python3-cysignals/patches/fix-cross.patch
diff --git a/srcpkgs/python3-cysignals/patches/fix-cross.patch b/srcpkgs/python3-cysignals/patches/fix-cross.patch
new file mode 100644
index 0000000000000..8d08c516e0eb1
--- /dev/null
+++ b/srcpkgs/python3-cysignals/patches/fix-cross.patch
@@ -0,0 +1,23 @@
+diff --git a/configure.ac b/configure.ac
+index d0624ec..f5a6786 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -48,7 +48,7 @@ fi
+ AC_MSG_CHECKING([for emms instruction])
+ # We add the "leal" instruction to reduce false positives in case some
+ # non-x86 architecture also has an "emms" instruction.
+-AC_RUN_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
++AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
+ dnl YES
+ [AC_MSG_RESULT([yes])]
+ AC_DEFINE(HAVE_EMMS, 1, [Define to 1 if your processor understands the "emms" instruction.])
+@@ -84,6 +84,9 @@ AC_RUN_IFELSE([AC_LANG_PROGRAM(
+ ,
+ dnl NO
+ [AC_MSG_RESULT([no])]
++ ,
++ [AC_MSG_RESULT([cross, assume yes])]
++ sigsetjmp=yes
+ )
+
+ AC_MSG_CHECKING([for GNU libc])
diff --git a/srcpkgs/python3-cysignals/template b/srcpkgs/python3-cysignals/template
index da80babe1fcb1..492ae7ba59d22 100644
--- a/srcpkgs/python3-cysignals/template
+++ b/srcpkgs/python3-cysignals/template
@@ -1,18 +1,30 @@
# Template file for 'python3-cysignals'
pkgname=python3-cysignals
-version=1.11.3
+version=1.11.4
revision=1
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython autoconf"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython"
makedepends="python3-devel pari-devel"
depends="python3"
short_desc="Interrupt and signal handling for Cython"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="LGPL-3.0-or-later"
homepage="https://github.com/sagemath/cysignals"
+changelog="https://github.com/sagemath/cysignals/releases"
distfiles="${PYPI_SITE}/c/cysignals/cysignals-${version}.tar.gz"
-checksum=c2c01f666e5904948952a2250548d8c36ccedd640383791feacf26ea2b958365
-nocross=yes # runs binaries built for target
+checksum=0f1e321e55a07f901c86a36a1e4497f6ff9dfe700681d0130a38c36e4eb238c3
+
+# run autoconf after patching configure.ac
+hostmakedepends+=" autoconf"
+post_patch() {
+ autoconf
+}
+
+do_configure() {
+ # set up configure_args with common settings as in build-style=gnu-configure
+ build_style=gnu-configure source /void-packages/common/environment/configure/gnu-configure-args.sh
+ ./configure ${configure_args}
+}
do_check() {
make check
From 1dba2fcda09b0d8a13299485611dd2b9fe623806 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 16:47:38 -0300
Subject: [PATCH 2/7] python3-cypari2: update to 2.1.4, fix cross-build.
---
.../patches/cython3-legacy.patch | 32 ---
.../python3-cypari2/patches/python312.patch | 214 ------------------
srcpkgs/python3-cypari2/template | 14 +-
3 files changed, 8 insertions(+), 252 deletions(-)
delete mode 100644 srcpkgs/python3-cypari2/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-cypari2/patches/python312.patch
diff --git a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch b/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
deleted file mode 100644
index 41392fe80d736..0000000000000
--- a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-commit 8ef356a4eb936c37f55a5c501f3a955e6740c0c5
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 19:45:23 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/cypari2/gen.pyx b/cypari2/gen.pyx
-index 247b1ad..75050a0 100644
---- a/cypari2/gen.pyx
-+++ b/cypari2/gen.pyx
-@@ -329,7 +329,7 @@ cdef class Gen(Gen_base):
- >>> pari = Pari()
- >>> L = pari("vector(10,i,i^2)")
- >>> L.__iter__()
-- <generator object at ...>
-+ <...generator object at ...>
- >>> [x for x in L]
- [1, 4, 9, 16, 25, 36, 49, 64, 81, 100]
- >>> list(L)
-diff --git a/setup.py b/setup.py
-index 2188711..455337f 100755
---- a/setup.py
-+++ b/setup.py
-@@ -36,6 +36,8 @@ class build_ext(_build_ext):
- "binding": True,
- "cdivision": True,
- "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ "c_api_binop_methods": True,
- }
-
- _build_ext.finalize_options(self)
diff --git a/srcpkgs/python3-cypari2/patches/python312.patch b/srcpkgs/python3-cypari2/patches/python312.patch
deleted file mode 100644
index 255cfb9f1fb75..0000000000000
--- a/srcpkgs/python3-cypari2/patches/python312.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From 0c7e9a1749d67ef1b880283112e968f644e24341 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 07:47:14 -0300
-Subject: [PATCH] Support python 3.12
-
----
- cypari2/Py_SET_SIZE.h | 8 ----
- cypari2/convert.pyx | 27 ++++--------
- cypari2/pycore_long.h | 98 +++++++++++++++++++++++++++++++++++++++++
- cypari2/pycore_long.pxd | 9 ++++
- 4 files changed, 116 insertions(+), 26 deletions(-)
- delete mode 100644 cypari2/Py_SET_SIZE.h
- create mode 100644 cypari2/pycore_long.h
- create mode 100644 cypari2/pycore_long.pxd
-
-diff --git a/cypari2/Py_SET_SIZE.h b/cypari2/Py_SET_SIZE.h
-deleted file mode 100644
-index 5f18ab0..0000000
---- a/cypari2/Py_SET_SIZE.h
-+++ /dev/null
-@@ -1,8 +0,0 @@
--#include "Python.h"
--
--#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
--// The function Py_SET_SIZE is defined starting with python 3.9.
--void Py_SET_SIZE(PyVarObject *o, Py_ssize_t size){
-- Py_SIZE(o) = size;
--}
--#endif
-diff --git a/cypari2/convert.pyx b/cypari2/convert.pyx
-index 7c2ed24..8d39c3c 100644
---- a/cypari2/convert.pyx
-+++ b/cypari2/convert.pyx
-@@ -54,14 +54,8 @@ from libc.math cimport INFINITY
- from .paridecl cimport *
- from .stack cimport new_gen, reset_avma
- from .string_utils cimport to_string, to_bytes
--
--cdef extern from *:
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
--cdef extern from "Py_SET_SIZE.h":
-- void Py_SET_SIZE(py_long o, Py_ssize_t size)
--
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
-
- ########################################################################
- # Conversion PARI -> Python
-@@ -424,7 +418,7 @@ cdef PyLong_FromINT(GEN g):
- cdef Py_ssize_t sizedigits_final = 0
-
- cdef py_long x = _PyLong_New(sizedigits)
-- cdef digit* D = x.ob_digit
-+ cdef digit* D = ob_digit(x)
-
- cdef digit d
- cdef ulong w
-@@ -452,10 +446,7 @@ cdef PyLong_FromINT(GEN g):
- sizedigits_final = i+1
-
- # Set correct size
-- if signe(g) > 0:
-- Py_SET_SIZE(x, sizedigits_final)
-- else:
-- Py_SET_SIZE(x, -sizedigits_final)
-+ _PyLong_SetSignAndDigitCount(x, signe(g), sizedigits_final)
-
- return x
-
-@@ -465,18 +456,18 @@ cdef PyLong_FromINT(GEN g):
- ########################################################################
-
- cdef GEN PyLong_AS_GEN(py_long x):
-- cdef const digit* D = x.ob_digit
-+ cdef const digit* D = ob_digit(x)
-
- # Size of the input
- cdef size_t sizedigits
- cdef long sgn
-- if Py_SIZE(x) == 0:
-+ if _PyLong_IsZero(x):
- return gen_0
-- elif Py_SIZE(x) > 0:
-- sizedigits = Py_SIZE(x)
-+ elif _PyLong_IsPositive(x):
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(1)
- else:
-- sizedigits = -Py_SIZE(x)
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(-1)
-
- # Size of the output, in bits and in words
-diff --git a/cypari2/pycore_long.h b/cypari2/pycore_long.h
-new file mode 100644
-index 0000000..ff1a73d
---- /dev/null
-+++ b/cypari2/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/cypari2/pycore_long.pxd b/cypari2/pycore_long.pxd
-new file mode 100644
-index 0000000..41de637
---- /dev/null
-+++ b/cypari2/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
diff --git a/srcpkgs/python3-cypari2/template b/srcpkgs/python3-cypari2/template
index c93052ba52bce..7e359e790f57e 100644
--- a/srcpkgs/python3-cypari2/template
+++ b/srcpkgs/python3-cypari2/template
@@ -1,18 +1,20 @@
# Template file for 'python3-cypari2'
pkgname=python3-cypari2
-version=2.1.3
-revision=5
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython pari perl"
-makedepends="python3-devel python3-cysignals pari-devel gmp-devel"
+version=2.1.4
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals pari perl"
+makedepends="python3-devel pari-devel gmp-devel"
depends="python3-cysignals"
checkdepends="${depends} python3-pytest"
short_desc="Python interface to the number theory library PARI/GP"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-2.0-or-later"
homepage="https://github.com/sagemath/cypari2"
+changelog="https://github.com/sagemath/cypari2/releases"
distfiles="https://github.com/sagemath/cypari2/archive/refs/tags/${version}.tar.gz"
-checksum=6f6f6ca2b2c2dbef4444727e8fb8652b090cfac4297ba959e94b3a91bbd86548
+checksum=95daf1a74275a35730bbca75144776c1bb0594dd90af82ebf7bf96bb1a52c3d8
do_check() {
# Please do not disable this custom check;
From 2e76054b2524e40c14bb0ff12621e41cc7da48c2 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Tue, 17 Oct 2023 17:28:40 -0300
Subject: [PATCH 3/7] fplll: update to 5.4.5.
---
srcpkgs/fplll/template | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/fplll/template b/srcpkgs/fplll/template
index 9843d46828414..74fb8744ef51a 100644
--- a/srcpkgs/fplll/template
+++ b/srcpkgs/fplll/template
@@ -1,6 +1,6 @@
# Template file for 'fplll'
pkgname=fplll
-version=5.4.4
+version=5.4.5
revision=1
build_style=gnu-configure
makedepends="gmp-devel mpfr-devel"
@@ -10,7 +10,7 @@ license="LGPL-2.1-or-later"
homepage="https://github.com/fplll/fplll"
changelog="https://github.com/fplll/fplll/releases"
distfiles="https://github.com/fplll/fplll/releases/download/${version}/fplll-${version}.tar.gz"
-checksum=0fd9d378f04ff886d8864728baf5d90b8b0b82c1e541e92550644fb54f75691d
+checksum=76d3778f0326597ed7505bab19493a9bf6b73a5c5ca614e8fb82f42105c57d00
fplll-devel_package() {
depends="${makedepends} ${sourcepkg}>=${version}_${revision}"
From 2a84ba41e4ca7bb14dd87917836eb7b2bb166890 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 17:36:36 -0300
Subject: [PATCH 4/7] python3-fpylll: update to 0.6.0, fix cross-build.
---
.../patches/cython3-legacy.patch | 37 ---
.../python3-fpylll/patches/python312.patch | 213 ------------------
srcpkgs/python3-fpylll/template | 19 +-
3 files changed, 8 insertions(+), 261 deletions(-)
delete mode 100644 srcpkgs/python3-fpylll/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-fpylll/patches/python312.patch
diff --git a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch b/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
deleted file mode 100644
index 808c14e9c1b47..0000000000000
--- a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-commit b6e12c2b0648e84b26dcf0aac507a5b4d9dde301
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 20:38:01 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/setup.py b/setup.py
-index 274836f..8fc5af5 100755
---- a/setup.py
-+++ b/setup.py
-@@ -123,7 +123,12 @@ class build_ext(_build_ext, object):
- self.extensions,
- include_path=["src"],
- build_dir=self.cythonize_dir,
-- compiler_directives={"binding": True, "embedsignature": True, "language_level": 2},
-+ compiler_directives={
-+ "binding": True,
-+ "embedsignature": True,
-+ "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ },
- )
- super(build_ext, self).run()
-
-diff --git a/src/fpylll/fplll/enumeration_callback_helper.h b/src/fpylll/fplll/enumeration_callback_helper.h
-index c099430..706162f 100644
---- a/src/fpylll/fplll/enumeration_callback_helper.h
-+++ b/src/fpylll/fplll/enumeration_callback_helper.h
-@@ -5,7 +5,7 @@
- #include <Python.h>
- #include <fplll/fplll.h>
-
--extern "C" {
-+extern "C++" {
- bool evaluator_callback_call_obj(PyObject *obj, int n, double *new_sol_coord);
- }
-
diff --git a/srcpkgs/python3-fpylll/patches/python312.patch b/srcpkgs/python3-fpylll/patches/python312.patch
deleted file mode 100644
index d2947a0622a36..0000000000000
--- a/srcpkgs/python3-fpylll/patches/python312.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 4ed789aac4eeb1c109cbeb4822fac0b5ff76bd37 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 08:59:00 -0300
-Subject: [PATCH] Support python 3.12
-
----
- src/fpylll/gmp/pycore_long.h | 98 ++++++++++++++++++++++++++++++++++
- src/fpylll/gmp/pycore_long.pxd | 9 ++++
- src/fpylll/gmp/pylong.pxd | 17 +-----
- src/fpylll/gmp/pylong.pyx | 22 ++++----
- 4 files changed, 119 insertions(+), 27 deletions(-)
- create mode 100644 src/fpylll/gmp/pycore_long.h
- create mode 100644 src/fpylll/gmp/pycore_long.pxd
-
-diff --git a/src/fpylll/gmp/pycore_long.h b/src/fpylll/gmp/pycore_long.h
-new file mode 100644
-index 00000000..ff1a73d0
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/src/fpylll/gmp/pycore_long.pxd b/src/fpylll/gmp/pycore_long.pxd
-new file mode 100644
-index 00000000..41de637f
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
-diff --git a/src/fpylll/gmp/pylong.pxd b/src/fpylll/gmp/pylong.pxd
-index 4ec3f47c..c64bcb6a 100644
---- a/src/fpylll/gmp/pylong.pxd
-+++ b/src/fpylll/gmp/pylong.pxd
-@@ -3,23 +3,10 @@
- Various functions to deal with conversion mpz <-> Python int/long
- """
-
--cdef extern from "Python.h":
-- cdef _PyLong_New(Py_ssize_t s)
-- cdef long PyLong_SHIFT
-- ctypedef unsigned int digit
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
-- ctypedef struct PyObject:
-- pass
--
-- ctypedef struct PyVarObject:
-- PyObject ob_base
-- Py_ssize_t ob_size
--
-+from cpython.longintrepr cimport py_long
- from fpylll.gmp.types cimport *
-
- cdef mpz_get_pylong(mpz_srcptr z)
- cdef mpz_get_pyintlong(mpz_srcptr z)
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1
- cdef Py_hash_t mpz_pythonhash(mpz_srcptr z)
-diff --git a/src/fpylll/gmp/pylong.pyx b/src/fpylll/gmp/pylong.pyx
-index 4b47146f..885d4efe 100644
---- a/src/fpylll/gmp/pylong.pyx
-+++ b/src/fpylll/gmp/pylong.pyx
-@@ -28,6 +28,9 @@ AUTHORS:
-
- from cpython.int cimport PyInt_FromLong
- from cpython.long cimport PyLong_CheckExact, PyLong_FromLong
-+from cpython.longintrepr cimport _PyLong_New, digit, PyLong_SHIFT
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
- from .mpz cimport *
-
- # Unused bits in every PyLong digit
-@@ -40,11 +43,9 @@ cdef mpz_get_pylong_large(mpz_srcptr z):
- """
- cdef size_t nbits = mpz_sizeinbase(z, 2)
- cdef size_t pylong_size = (nbits + PyLong_SHIFT - 1) // PyLong_SHIFT
-- L = _PyLong_New(pylong_size)
-- mpz_export((<PyLongObject*>L).ob_digit, NULL,
-- -1, sizeof(digit), 0, PyLong_nails, z)
-- if mpz_sgn(z) < 0:
-- (<PyVarObject*>L).ob_size = -(<PyVarObject*>L).ob_size
-+ cdef py_long L = _PyLong_New(pylong_size)
-+ mpz_export(ob_digit(L), NULL, -1, sizeof(digit), 0, PyLong_nails, z)
-+ _PyLong_SetSignAndDigitCount(L, mpz_sgn(z), pylong_size)
- return L
-
-
-@@ -67,16 +68,13 @@ cdef mpz_get_pyintlong(mpz_srcptr z):
- return mpz_get_pylong_large(z)
-
-
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1:
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1:
- """
- Convert a Python ``long`` `L` to an ``mpz``.
- """
-- cdef Py_ssize_t pylong_size = (<PyVarObject*>L).ob_size
-- if pylong_size < 0:
-- pylong_size = -pylong_size
-- mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails,
-- (<PyLongObject*>L).ob_digit)
-- if (<PyVarObject*>L).ob_size < 0:
-+ cdef Py_ssize_t pylong_size = _PyLong_DigitCount(L)
-+ mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails, ob_digit(L))
-+ if _PyLong_IsNegative(L):
- mpz_neg(z, z)
-
-
diff --git a/srcpkgs/python3-fpylll/template b/srcpkgs/python3-fpylll/template
index adff12e05ae3a..49bfd4ec0262a 100644
--- a/srcpkgs/python3-fpylll/template
+++ b/srcpkgs/python3-fpylll/template
@@ -1,11 +1,11 @@
# Template file for 'python3-fpylll'
pkgname=python3-fpylll
-version=0.5.9
-revision=3
-build_style=python3-module
-hostmakedepends="python3-Cython"
-makedepends="python3-cysignals python3-devel gmp-devel mpfr-devel fplll-devel
- pari-devel"
+version=0.6.0
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel gmp-devel mpfr-devel fplll-devel pari-devel"
depends="python3"
checkdepends="python3-pytest python3-numpy"
short_desc="Python wrapper to fplll (floating point lattice algorithms)"
@@ -14,13 +14,10 @@ license="GPL-2.0-or-later"
homepage="https://github.com/fplll/fpylll"
changelog="https://github.com/fplll/fpylll/releases"
distfiles="${PYPI_SITE}/f/fpylll/fpylll-${version}.tar.gz"
-checksum=be16d40fd94ddea771ccef44434732dfbf9a88cf15cd5f9020ec7a8197f16358
+checksum=623b4619b6da9fed9ba26b1ac7e8d8e620a06d2a5f7095ee67985c7160d3c3a4
+make_check_pre="env PY_IGNORE_IMPORTMISMATCH=1"
case $XBPS_TARGET_MACHINE in
# skip a test with numerical noise on 32 bit
i686*) make_check_args="-k not(averaged_simulate_prob)" ;;
esac
-
-pre_check() {
- export PY_IGNORE_IMPORTMISMATCH=1
-}
From 86f3567f0e4e0ef9a48682b082daabb39facdb97 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:11:02 -0300
Subject: [PATCH 5/7] python3-primecountpy: fix cross-build.
---
srcpkgs/python3-primecountpy/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/python3-primecountpy/template b/srcpkgs/python3-primecountpy/template
index 886e5d67c512a..eb3587dbb29c8 100644
--- a/srcpkgs/python3-primecountpy/template
+++ b/srcpkgs/python3-primecountpy/template
@@ -2,9 +2,10 @@
pkgname=python3-primecountpy
version=0.1.0
revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython"
-makedepends="python3-cysignals python3-devel primecount-devel pari-devel"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel primecount-devel pari-devel"
depends="python3"
short_desc="Python interface to the C++ library primecount"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
From e72a2ed23e528554073a61c7b7fd511e872be6c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:13:34 -0300
Subject: [PATCH 6/7] python3-pplpy: update to 0.8.9, fix cross-build.
---
.../patches/dont-depend-on-sphinx.patch | 7 +++++++
srcpkgs/python3-pplpy/template | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
create mode 100644 srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
diff --git a/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
new file mode 100644
index 0000000000000..65c5cf40d73bd
--- /dev/null
+++ b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
@@ -0,0 +1,7 @@
+--- a/pyproject.toml
++++ b/pyproject.toml
+@@ -1,3 +1,3 @@
+ [build-system]
+-requires = ["setuptools", "wheel", "Cython", "cysignals", "sphinx", "gmpy2>=2.1.0b1"]
++requires = ["setuptools", "wheel", "Cython", "cysignals", "gmpy2>=2.1.0b1"]
+ build-backend = "setuptools.build_meta"
diff --git a/srcpkgs/python3-pplpy/template b/srcpkgs/python3-pplpy/template
index fe6b08dba40f2..4a9c987b2a859 100644
--- a/srcpkgs/python3-pplpy/template
+++ b/srcpkgs/python3-pplpy/template
@@ -1,19 +1,20 @@
# Template file for 'python3-pplpy'
pkgname=python3-pplpy
-version=0.8.7
-revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython0.29"
-makedepends="python3-cysignals python3-gmpy2 python3-devel gmp-devel
- gmpxx-devel ppl-devel mpfr-devel libmpc-devel pari-devel"
+version=0.8.9
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython0.29
+ python3-cysignals python3-gmpy2"
+makedepends="python3-devel gmp-devel gmpxx-devel ppl-devel mpfr-devel
+ libmpc-devel pari-devel"
depends="python3"
short_desc="Python wrapper to the C++ Parma Polyhedra Library (PPL)"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-3.0-or-later"
-homepage="https://gitlab.com/videlec/pplpy"
-changelog="https://gitlab.com/videlec/pplpy/-/raw/master/CHANGES.txt"
+homepage="https://github.com/sagemath/pplpy"
+changelog="https://raw.githubusercontent.com/sagemath/pplpy/master/CHANGES.txt"
distfiles="${PYPI_SITE}/p/pplpy/pplpy-${version}.tar.gz"
-checksum=500bd0f4ae1a76956fae7fcba77854f5ec3e64fce76803664983763c3f2bd8bd
+checksum=db7a3b571d6ef053f75137975e947c3a1c1e45a30bab90eaf215b4e5cc15797e
do_check() {
PYTHONPATH=$(cd build/lib* && pwd) python3 setup.py test
From 4dd0d4d6856b8e86b534db3ca0067f62f147a120 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Wed, 18 Oct 2023 19:59:46 -0300
Subject: [PATCH 7/7] python3-cysignals: use gnu-configure build-style
---
srcpkgs/python3-cysignals/template | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/srcpkgs/python3-cysignals/template b/srcpkgs/python3-cysignals/template
index 492ae7ba59d22..7e3d696a7c33d 100644
--- a/srcpkgs/python3-cysignals/template
+++ b/srcpkgs/python3-cysignals/template
@@ -2,8 +2,11 @@
pkgname=python3-cysignals
version=1.11.4
revision=1
-build_style=python3-pep517
-hostmakedepends="python3-setuptools python3-wheel python3-Cython"
+# need gnu-configure build style to support cross build
+build_style=gnu-configure
+build_helper=python3
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-build python3-installer autoconf"
makedepends="python3-devel pari-devel"
depends="python3"
short_desc="Interrupt and signal handling for Cython"
@@ -14,18 +17,17 @@ changelog="https://github.com/sagemath/cysignals/releases"
distfiles="${PYPI_SITE}/c/cysignals/cysignals-${version}.tar.gz"
checksum=0f1e321e55a07f901c86a36a1e4497f6ff9dfe700681d0130a38c36e4eb238c3
-# run autoconf after patching configure.ac
-hostmakedepends+=" autoconf"
post_patch() {
+ # run autoconf after patching configure.ac
autoconf
}
-do_configure() {
- # set up configure_args with common settings as in build-style=gnu-configure
- build_style=gnu-configure source /void-packages/common/environment/configure/gnu-configure-args.sh
- ./configure ${configure_args}
+do_build() {
+ # taken from build-style/python3-pep517
+ python3 -m build --no-isolation --wheel .
}
-do_check() {
- make check
+do_install() {
+ # taken from build-style/python3-pep517
+ python3 -m installer --destdir ${DESTDIR} --no-compile-bytecode dist/*.whl
}
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (5 preceding siblings ...)
2023-10-18 22:59 ` [PR PATCH] [Updated] " tornaria
@ 2023-10-19 1:53 ` tornaria
2023-10-19 1:54 ` tornaria
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-19 1:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]
There is an updated pull request by tornaria against master on the void-packages repository
https://github.com/tornaria/void-packages cysignals
https://github.com/void-linux/void-packages/pull/46738
Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
Summary of changes:
- python3-cysignals: update to 1.11.4, fix cross-build.
- python3-cypari2: update to 2.1.4, fix cross-build.
- fplll: update to 5.4.5.
- python3-fpylll: update to 0.6.0, fix cross-build.
- python3-primecountpy: fix cross-build.
- python3-pplpy: update to 0.8.9, fix cross-build.
#### Testing the changes
- I tested the changes in this PR: **briefly**
Note that pplpy is still building with Cython0.29 as the cython version has to match the one used to build sagemath. We'll switch to Cython 3 when sagemath 10.2 is released.
@dkwo some cross pkgs for you.
<!--
#### New package
- This new package conforms to the [package requirements](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#package-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please add ci skip tag as described in
https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/46738.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-cysignals-46738.patch --]
[-- Type: text/x-diff, Size: 28049 bytes --]
From 9a1c7cdf8d1804e0539e9774ad80a45c85879df0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Sun, 8 Oct 2023 19:40:27 -0300
Subject: [PATCH 1/6] python3-cysignals: update to 1.11.4, fix cross-build.
---
.../python3-cysignals/patches/fix-cross.patch | 23 +++++++++++++++
srcpkgs/python3-cysignals/template | 28 ++++++++++++++-----
2 files changed, 44 insertions(+), 7 deletions(-)
create mode 100644 srcpkgs/python3-cysignals/patches/fix-cross.patch
diff --git a/srcpkgs/python3-cysignals/patches/fix-cross.patch b/srcpkgs/python3-cysignals/patches/fix-cross.patch
new file mode 100644
index 0000000000000..8d08c516e0eb1
--- /dev/null
+++ b/srcpkgs/python3-cysignals/patches/fix-cross.patch
@@ -0,0 +1,23 @@
+diff --git a/configure.ac b/configure.ac
+index d0624ec..f5a6786 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -48,7 +48,7 @@ fi
+ AC_MSG_CHECKING([for emms instruction])
+ # We add the "leal" instruction to reduce false positives in case some
+ # non-x86 architecture also has an "emms" instruction.
+-AC_RUN_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
++AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
+ dnl YES
+ [AC_MSG_RESULT([yes])]
+ AC_DEFINE(HAVE_EMMS, 1, [Define to 1 if your processor understands the "emms" instruction.])
+@@ -84,6 +84,9 @@ AC_RUN_IFELSE([AC_LANG_PROGRAM(
+ ,
+ dnl NO
+ [AC_MSG_RESULT([no])]
++ ,
++ [AC_MSG_RESULT([cross, assume yes])]
++ sigsetjmp=yes
+ )
+
+ AC_MSG_CHECKING([for GNU libc])
diff --git a/srcpkgs/python3-cysignals/template b/srcpkgs/python3-cysignals/template
index da80babe1fcb1..64289ad95dc0f 100644
--- a/srcpkgs/python3-cysignals/template
+++ b/srcpkgs/python3-cysignals/template
@@ -1,19 +1,33 @@
# Template file for 'python3-cysignals'
pkgname=python3-cysignals
-version=1.11.3
+version=1.11.4
revision=1
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython autoconf"
+# need gnu-configure build style to support cross build
+build_style=gnu-configure
+build_helper=python3
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-build python3-installer autoconf"
makedepends="python3-devel pari-devel"
depends="python3"
short_desc="Interrupt and signal handling for Cython"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="LGPL-3.0-or-later"
homepage="https://github.com/sagemath/cysignals"
+changelog="https://github.com/sagemath/cysignals/releases"
distfiles="${PYPI_SITE}/c/cysignals/cysignals-${version}.tar.gz"
-checksum=c2c01f666e5904948952a2250548d8c36ccedd640383791feacf26ea2b958365
-nocross=yes # runs binaries built for target
+checksum=0f1e321e55a07f901c86a36a1e4497f6ff9dfe700681d0130a38c36e4eb238c3
-do_check() {
- make check
+pre_configure() {
+ # run autoconf because we patched configure.ac
+ autoconf
+}
+
+do_build() {
+ # build as in python3-pep517 build style
+ python3 -m build --no-isolation --wheel .
+}
+
+do_install() {
+ # install as in python3-pep517 build style
+ python3 -m installer --destdir ${DESTDIR} --no-compile-bytecode dist/*.whl
}
From 64935c6e4d1e8413d8a758d1fe90416bed55ab1f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 16:47:38 -0300
Subject: [PATCH 2/6] python3-cypari2: update to 2.1.4, fix cross-build.
---
.../patches/cython3-legacy.patch | 32 ---
.../python3-cypari2/patches/python312.patch | 214 ------------------
srcpkgs/python3-cypari2/template | 14 +-
3 files changed, 8 insertions(+), 252 deletions(-)
delete mode 100644 srcpkgs/python3-cypari2/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-cypari2/patches/python312.patch
diff --git a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch b/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
deleted file mode 100644
index 41392fe80d736..0000000000000
--- a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-commit 8ef356a4eb936c37f55a5c501f3a955e6740c0c5
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 19:45:23 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/cypari2/gen.pyx b/cypari2/gen.pyx
-index 247b1ad..75050a0 100644
---- a/cypari2/gen.pyx
-+++ b/cypari2/gen.pyx
-@@ -329,7 +329,7 @@ cdef class Gen(Gen_base):
- >>> pari = Pari()
- >>> L = pari("vector(10,i,i^2)")
- >>> L.__iter__()
-- <generator object at ...>
-+ <...generator object at ...>
- >>> [x for x in L]
- [1, 4, 9, 16, 25, 36, 49, 64, 81, 100]
- >>> list(L)
-diff --git a/setup.py b/setup.py
-index 2188711..455337f 100755
---- a/setup.py
-+++ b/setup.py
-@@ -36,6 +36,8 @@ class build_ext(_build_ext):
- "binding": True,
- "cdivision": True,
- "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ "c_api_binop_methods": True,
- }
-
- _build_ext.finalize_options(self)
diff --git a/srcpkgs/python3-cypari2/patches/python312.patch b/srcpkgs/python3-cypari2/patches/python312.patch
deleted file mode 100644
index 255cfb9f1fb75..0000000000000
--- a/srcpkgs/python3-cypari2/patches/python312.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From 0c7e9a1749d67ef1b880283112e968f644e24341 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 07:47:14 -0300
-Subject: [PATCH] Support python 3.12
-
----
- cypari2/Py_SET_SIZE.h | 8 ----
- cypari2/convert.pyx | 27 ++++--------
- cypari2/pycore_long.h | 98 +++++++++++++++++++++++++++++++++++++++++
- cypari2/pycore_long.pxd | 9 ++++
- 4 files changed, 116 insertions(+), 26 deletions(-)
- delete mode 100644 cypari2/Py_SET_SIZE.h
- create mode 100644 cypari2/pycore_long.h
- create mode 100644 cypari2/pycore_long.pxd
-
-diff --git a/cypari2/Py_SET_SIZE.h b/cypari2/Py_SET_SIZE.h
-deleted file mode 100644
-index 5f18ab0..0000000
---- a/cypari2/Py_SET_SIZE.h
-+++ /dev/null
-@@ -1,8 +0,0 @@
--#include "Python.h"
--
--#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
--// The function Py_SET_SIZE is defined starting with python 3.9.
--void Py_SET_SIZE(PyVarObject *o, Py_ssize_t size){
-- Py_SIZE(o) = size;
--}
--#endif
-diff --git a/cypari2/convert.pyx b/cypari2/convert.pyx
-index 7c2ed24..8d39c3c 100644
---- a/cypari2/convert.pyx
-+++ b/cypari2/convert.pyx
-@@ -54,14 +54,8 @@ from libc.math cimport INFINITY
- from .paridecl cimport *
- from .stack cimport new_gen, reset_avma
- from .string_utils cimport to_string, to_bytes
--
--cdef extern from *:
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
--cdef extern from "Py_SET_SIZE.h":
-- void Py_SET_SIZE(py_long o, Py_ssize_t size)
--
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
-
- ########################################################################
- # Conversion PARI -> Python
-@@ -424,7 +418,7 @@ cdef PyLong_FromINT(GEN g):
- cdef Py_ssize_t sizedigits_final = 0
-
- cdef py_long x = _PyLong_New(sizedigits)
-- cdef digit* D = x.ob_digit
-+ cdef digit* D = ob_digit(x)
-
- cdef digit d
- cdef ulong w
-@@ -452,10 +446,7 @@ cdef PyLong_FromINT(GEN g):
- sizedigits_final = i+1
-
- # Set correct size
-- if signe(g) > 0:
-- Py_SET_SIZE(x, sizedigits_final)
-- else:
-- Py_SET_SIZE(x, -sizedigits_final)
-+ _PyLong_SetSignAndDigitCount(x, signe(g), sizedigits_final)
-
- return x
-
-@@ -465,18 +456,18 @@ cdef PyLong_FromINT(GEN g):
- ########################################################################
-
- cdef GEN PyLong_AS_GEN(py_long x):
-- cdef const digit* D = x.ob_digit
-+ cdef const digit* D = ob_digit(x)
-
- # Size of the input
- cdef size_t sizedigits
- cdef long sgn
-- if Py_SIZE(x) == 0:
-+ if _PyLong_IsZero(x):
- return gen_0
-- elif Py_SIZE(x) > 0:
-- sizedigits = Py_SIZE(x)
-+ elif _PyLong_IsPositive(x):
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(1)
- else:
-- sizedigits = -Py_SIZE(x)
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(-1)
-
- # Size of the output, in bits and in words
-diff --git a/cypari2/pycore_long.h b/cypari2/pycore_long.h
-new file mode 100644
-index 0000000..ff1a73d
---- /dev/null
-+++ b/cypari2/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/cypari2/pycore_long.pxd b/cypari2/pycore_long.pxd
-new file mode 100644
-index 0000000..41de637
---- /dev/null
-+++ b/cypari2/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
diff --git a/srcpkgs/python3-cypari2/template b/srcpkgs/python3-cypari2/template
index c93052ba52bce..7e359e790f57e 100644
--- a/srcpkgs/python3-cypari2/template
+++ b/srcpkgs/python3-cypari2/template
@@ -1,18 +1,20 @@
# Template file for 'python3-cypari2'
pkgname=python3-cypari2
-version=2.1.3
-revision=5
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython pari perl"
-makedepends="python3-devel python3-cysignals pari-devel gmp-devel"
+version=2.1.4
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals pari perl"
+makedepends="python3-devel pari-devel gmp-devel"
depends="python3-cysignals"
checkdepends="${depends} python3-pytest"
short_desc="Python interface to the number theory library PARI/GP"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-2.0-or-later"
homepage="https://github.com/sagemath/cypari2"
+changelog="https://github.com/sagemath/cypari2/releases"
distfiles="https://github.com/sagemath/cypari2/archive/refs/tags/${version}.tar.gz"
-checksum=6f6f6ca2b2c2dbef4444727e8fb8652b090cfac4297ba959e94b3a91bbd86548
+checksum=95daf1a74275a35730bbca75144776c1bb0594dd90af82ebf7bf96bb1a52c3d8
do_check() {
# Please do not disable this custom check;
From c0ee0ddf1b80d8846810ac8cd81dd1fb55a5301c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Tue, 17 Oct 2023 17:28:40 -0300
Subject: [PATCH 3/6] fplll: update to 5.4.5.
---
srcpkgs/fplll/template | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/fplll/template b/srcpkgs/fplll/template
index 9843d46828414..74fb8744ef51a 100644
--- a/srcpkgs/fplll/template
+++ b/srcpkgs/fplll/template
@@ -1,6 +1,6 @@
# Template file for 'fplll'
pkgname=fplll
-version=5.4.4
+version=5.4.5
revision=1
build_style=gnu-configure
makedepends="gmp-devel mpfr-devel"
@@ -10,7 +10,7 @@ license="LGPL-2.1-or-later"
homepage="https://github.com/fplll/fplll"
changelog="https://github.com/fplll/fplll/releases"
distfiles="https://github.com/fplll/fplll/releases/download/${version}/fplll-${version}.tar.gz"
-checksum=0fd9d378f04ff886d8864728baf5d90b8b0b82c1e541e92550644fb54f75691d
+checksum=76d3778f0326597ed7505bab19493a9bf6b73a5c5ca614e8fb82f42105c57d00
fplll-devel_package() {
depends="${makedepends} ${sourcepkg}>=${version}_${revision}"
From 930ee2ff5eff3f63728f0a5054e0e9515ec00cf7 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 17:36:36 -0300
Subject: [PATCH 4/6] python3-fpylll: update to 0.6.0, fix cross-build.
---
.../patches/cython3-legacy.patch | 37 ---
.../python3-fpylll/patches/python312.patch | 213 ------------------
srcpkgs/python3-fpylll/template | 19 +-
3 files changed, 8 insertions(+), 261 deletions(-)
delete mode 100644 srcpkgs/python3-fpylll/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-fpylll/patches/python312.patch
diff --git a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch b/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
deleted file mode 100644
index 808c14e9c1b47..0000000000000
--- a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-commit b6e12c2b0648e84b26dcf0aac507a5b4d9dde301
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 20:38:01 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/setup.py b/setup.py
-index 274836f..8fc5af5 100755
---- a/setup.py
-+++ b/setup.py
-@@ -123,7 +123,12 @@ class build_ext(_build_ext, object):
- self.extensions,
- include_path=["src"],
- build_dir=self.cythonize_dir,
-- compiler_directives={"binding": True, "embedsignature": True, "language_level": 2},
-+ compiler_directives={
-+ "binding": True,
-+ "embedsignature": True,
-+ "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ },
- )
- super(build_ext, self).run()
-
-diff --git a/src/fpylll/fplll/enumeration_callback_helper.h b/src/fpylll/fplll/enumeration_callback_helper.h
-index c099430..706162f 100644
---- a/src/fpylll/fplll/enumeration_callback_helper.h
-+++ b/src/fpylll/fplll/enumeration_callback_helper.h
-@@ -5,7 +5,7 @@
- #include <Python.h>
- #include <fplll/fplll.h>
-
--extern "C" {
-+extern "C++" {
- bool evaluator_callback_call_obj(PyObject *obj, int n, double *new_sol_coord);
- }
-
diff --git a/srcpkgs/python3-fpylll/patches/python312.patch b/srcpkgs/python3-fpylll/patches/python312.patch
deleted file mode 100644
index d2947a0622a36..0000000000000
--- a/srcpkgs/python3-fpylll/patches/python312.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 4ed789aac4eeb1c109cbeb4822fac0b5ff76bd37 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 08:59:00 -0300
-Subject: [PATCH] Support python 3.12
-
----
- src/fpylll/gmp/pycore_long.h | 98 ++++++++++++++++++++++++++++++++++
- src/fpylll/gmp/pycore_long.pxd | 9 ++++
- src/fpylll/gmp/pylong.pxd | 17 +-----
- src/fpylll/gmp/pylong.pyx | 22 ++++----
- 4 files changed, 119 insertions(+), 27 deletions(-)
- create mode 100644 src/fpylll/gmp/pycore_long.h
- create mode 100644 src/fpylll/gmp/pycore_long.pxd
-
-diff --git a/src/fpylll/gmp/pycore_long.h b/src/fpylll/gmp/pycore_long.h
-new file mode 100644
-index 00000000..ff1a73d0
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/src/fpylll/gmp/pycore_long.pxd b/src/fpylll/gmp/pycore_long.pxd
-new file mode 100644
-index 00000000..41de637f
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
-diff --git a/src/fpylll/gmp/pylong.pxd b/src/fpylll/gmp/pylong.pxd
-index 4ec3f47c..c64bcb6a 100644
---- a/src/fpylll/gmp/pylong.pxd
-+++ b/src/fpylll/gmp/pylong.pxd
-@@ -3,23 +3,10 @@
- Various functions to deal with conversion mpz <-> Python int/long
- """
-
--cdef extern from "Python.h":
-- cdef _PyLong_New(Py_ssize_t s)
-- cdef long PyLong_SHIFT
-- ctypedef unsigned int digit
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
-- ctypedef struct PyObject:
-- pass
--
-- ctypedef struct PyVarObject:
-- PyObject ob_base
-- Py_ssize_t ob_size
--
-+from cpython.longintrepr cimport py_long
- from fpylll.gmp.types cimport *
-
- cdef mpz_get_pylong(mpz_srcptr z)
- cdef mpz_get_pyintlong(mpz_srcptr z)
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1
- cdef Py_hash_t mpz_pythonhash(mpz_srcptr z)
-diff --git a/src/fpylll/gmp/pylong.pyx b/src/fpylll/gmp/pylong.pyx
-index 4b47146f..885d4efe 100644
---- a/src/fpylll/gmp/pylong.pyx
-+++ b/src/fpylll/gmp/pylong.pyx
-@@ -28,6 +28,9 @@ AUTHORS:
-
- from cpython.int cimport PyInt_FromLong
- from cpython.long cimport PyLong_CheckExact, PyLong_FromLong
-+from cpython.longintrepr cimport _PyLong_New, digit, PyLong_SHIFT
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
- from .mpz cimport *
-
- # Unused bits in every PyLong digit
-@@ -40,11 +43,9 @@ cdef mpz_get_pylong_large(mpz_srcptr z):
- """
- cdef size_t nbits = mpz_sizeinbase(z, 2)
- cdef size_t pylong_size = (nbits + PyLong_SHIFT - 1) // PyLong_SHIFT
-- L = _PyLong_New(pylong_size)
-- mpz_export((<PyLongObject*>L).ob_digit, NULL,
-- -1, sizeof(digit), 0, PyLong_nails, z)
-- if mpz_sgn(z) < 0:
-- (<PyVarObject*>L).ob_size = -(<PyVarObject*>L).ob_size
-+ cdef py_long L = _PyLong_New(pylong_size)
-+ mpz_export(ob_digit(L), NULL, -1, sizeof(digit), 0, PyLong_nails, z)
-+ _PyLong_SetSignAndDigitCount(L, mpz_sgn(z), pylong_size)
- return L
-
-
-@@ -67,16 +68,13 @@ cdef mpz_get_pyintlong(mpz_srcptr z):
- return mpz_get_pylong_large(z)
-
-
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1:
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1:
- """
- Convert a Python ``long`` `L` to an ``mpz``.
- """
-- cdef Py_ssize_t pylong_size = (<PyVarObject*>L).ob_size
-- if pylong_size < 0:
-- pylong_size = -pylong_size
-- mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails,
-- (<PyLongObject*>L).ob_digit)
-- if (<PyVarObject*>L).ob_size < 0:
-+ cdef Py_ssize_t pylong_size = _PyLong_DigitCount(L)
-+ mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails, ob_digit(L))
-+ if _PyLong_IsNegative(L):
- mpz_neg(z, z)
-
-
diff --git a/srcpkgs/python3-fpylll/template b/srcpkgs/python3-fpylll/template
index adff12e05ae3a..49bfd4ec0262a 100644
--- a/srcpkgs/python3-fpylll/template
+++ b/srcpkgs/python3-fpylll/template
@@ -1,11 +1,11 @@
# Template file for 'python3-fpylll'
pkgname=python3-fpylll
-version=0.5.9
-revision=3
-build_style=python3-module
-hostmakedepends="python3-Cython"
-makedepends="python3-cysignals python3-devel gmp-devel mpfr-devel fplll-devel
- pari-devel"
+version=0.6.0
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel gmp-devel mpfr-devel fplll-devel pari-devel"
depends="python3"
checkdepends="python3-pytest python3-numpy"
short_desc="Python wrapper to fplll (floating point lattice algorithms)"
@@ -14,13 +14,10 @@ license="GPL-2.0-or-later"
homepage="https://github.com/fplll/fpylll"
changelog="https://github.com/fplll/fpylll/releases"
distfiles="${PYPI_SITE}/f/fpylll/fpylll-${version}.tar.gz"
-checksum=be16d40fd94ddea771ccef44434732dfbf9a88cf15cd5f9020ec7a8197f16358
+checksum=623b4619b6da9fed9ba26b1ac7e8d8e620a06d2a5f7095ee67985c7160d3c3a4
+make_check_pre="env PY_IGNORE_IMPORTMISMATCH=1"
case $XBPS_TARGET_MACHINE in
# skip a test with numerical noise on 32 bit
i686*) make_check_args="-k not(averaged_simulate_prob)" ;;
esac
-
-pre_check() {
- export PY_IGNORE_IMPORTMISMATCH=1
-}
From 176773c64a35f98187da069e10d0307f59e48430 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:11:02 -0300
Subject: [PATCH 5/6] python3-primecountpy: fix cross-build.
---
srcpkgs/python3-primecountpy/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/python3-primecountpy/template b/srcpkgs/python3-primecountpy/template
index 886e5d67c512a..eb3587dbb29c8 100644
--- a/srcpkgs/python3-primecountpy/template
+++ b/srcpkgs/python3-primecountpy/template
@@ -2,9 +2,10 @@
pkgname=python3-primecountpy
version=0.1.0
revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython"
-makedepends="python3-cysignals python3-devel primecount-devel pari-devel"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel primecount-devel pari-devel"
depends="python3"
short_desc="Python interface to the C++ library primecount"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
From 61be9b9d607c43d74d90081757ce8a3e934257e4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:13:34 -0300
Subject: [PATCH 6/6] python3-pplpy: update to 0.8.9, fix cross-build.
---
.../patches/dont-depend-on-sphinx.patch | 7 +++++++
srcpkgs/python3-pplpy/template | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
create mode 100644 srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
diff --git a/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
new file mode 100644
index 0000000000000..65c5cf40d73bd
--- /dev/null
+++ b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
@@ -0,0 +1,7 @@
+--- a/pyproject.toml
++++ b/pyproject.toml
+@@ -1,3 +1,3 @@
+ [build-system]
+-requires = ["setuptools", "wheel", "Cython", "cysignals", "sphinx", "gmpy2>=2.1.0b1"]
++requires = ["setuptools", "wheel", "Cython", "cysignals", "gmpy2>=2.1.0b1"]
+ build-backend = "setuptools.build_meta"
diff --git a/srcpkgs/python3-pplpy/template b/srcpkgs/python3-pplpy/template
index fe6b08dba40f2..4a9c987b2a859 100644
--- a/srcpkgs/python3-pplpy/template
+++ b/srcpkgs/python3-pplpy/template
@@ -1,19 +1,20 @@
# Template file for 'python3-pplpy'
pkgname=python3-pplpy
-version=0.8.7
-revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython0.29"
-makedepends="python3-cysignals python3-gmpy2 python3-devel gmp-devel
- gmpxx-devel ppl-devel mpfr-devel libmpc-devel pari-devel"
+version=0.8.9
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython0.29
+ python3-cysignals python3-gmpy2"
+makedepends="python3-devel gmp-devel gmpxx-devel ppl-devel mpfr-devel
+ libmpc-devel pari-devel"
depends="python3"
short_desc="Python wrapper to the C++ Parma Polyhedra Library (PPL)"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-3.0-or-later"
-homepage="https://gitlab.com/videlec/pplpy"
-changelog="https://gitlab.com/videlec/pplpy/-/raw/master/CHANGES.txt"
+homepage="https://github.com/sagemath/pplpy"
+changelog="https://raw.githubusercontent.com/sagemath/pplpy/master/CHANGES.txt"
distfiles="${PYPI_SITE}/p/pplpy/pplpy-${version}.tar.gz"
-checksum=500bd0f4ae1a76956fae7fcba77854f5ec3e64fce76803664983763c3f2bd8bd
+checksum=db7a3b571d6ef053f75137975e947c3a1c1e45a30bab90eaf215b4e5cc15797e
do_check() {
PYTHONPATH=$(cd build/lib* && pwd) python3 setup.py test
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (6 preceding siblings ...)
2023-10-19 1:53 ` tornaria
@ 2023-10-19 1:54 ` tornaria
2023-10-19 11:21 ` tornaria
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-19 1:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 201 bytes --]
New comment by tornaria on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#issuecomment-1769766686
Comment:
Switched to gnu-configure build style as discussed on IRC.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (7 preceding siblings ...)
2023-10-19 1:54 ` tornaria
@ 2023-10-19 11:21 ` tornaria
2023-10-19 11:23 ` [PR PATCH] [Updated] " tornaria
2023-10-20 0:37 ` [PR PATCH] [Merged]: " ahesford
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-19 11:21 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 218 bytes --]
New comment by tornaria on void-packages repository
https://github.com/void-linux/void-packages/pull/46738#issuecomment-1770670349
Comment:
Moving `autoconf` from `post_patch()` to `pre_configure()` stops working...
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (8 preceding siblings ...)
2023-10-19 11:21 ` tornaria
@ 2023-10-19 11:23 ` tornaria
2023-10-20 0:37 ` [PR PATCH] [Merged]: " ahesford
10 siblings, 0 replies; 12+ messages in thread
From: tornaria @ 2023-10-19 11:23 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]
There is an updated pull request by tornaria against master on the void-packages repository
https://github.com/tornaria/void-packages cysignals
https://github.com/void-linux/void-packages/pull/46738
Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
Summary of changes:
- python3-cysignals: update to 1.11.4, fix cross-build.
- python3-cypari2: update to 2.1.4, fix cross-build.
- fplll: update to 5.4.5.
- python3-fpylll: update to 0.6.0, fix cross-build.
- python3-primecountpy: fix cross-build.
- python3-pplpy: update to 0.8.9, fix cross-build.
#### Testing the changes
- I tested the changes in this PR: **briefly**
Note that pplpy is still building with Cython0.29 as the cython version has to match the one used to build sagemath. We'll switch to Cython 3 when sagemath 10.2 is released.
@dkwo some cross pkgs for you.
<!--
#### New package
- This new package conforms to the [package requirements](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#package-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please add ci skip tag as described in
https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/46738.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-cysignals-46738.patch --]
[-- Type: text/x-diff, Size: 28046 bytes --]
From 1bca36edc720785053531ba7acde3543a5023dec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Sun, 8 Oct 2023 19:40:27 -0300
Subject: [PATCH 1/6] python3-cysignals: update to 1.11.4, fix cross-build.
---
.../python3-cysignals/patches/fix-cross.patch | 23 +++++++++++++++
srcpkgs/python3-cysignals/template | 28 ++++++++++++++-----
2 files changed, 44 insertions(+), 7 deletions(-)
create mode 100644 srcpkgs/python3-cysignals/patches/fix-cross.patch
diff --git a/srcpkgs/python3-cysignals/patches/fix-cross.patch b/srcpkgs/python3-cysignals/patches/fix-cross.patch
new file mode 100644
index 0000000000000..8d08c516e0eb1
--- /dev/null
+++ b/srcpkgs/python3-cysignals/patches/fix-cross.patch
@@ -0,0 +1,23 @@
+diff --git a/configure.ac b/configure.ac
+index d0624ec..f5a6786 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -48,7 +48,7 @@ fi
+ AC_MSG_CHECKING([for emms instruction])
+ # We add the "leal" instruction to reduce false positives in case some
+ # non-x86 architecture also has an "emms" instruction.
+-AC_RUN_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
++AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[asm("leal (%eax), %eax; emms");]])],
+ dnl YES
+ [AC_MSG_RESULT([yes])]
+ AC_DEFINE(HAVE_EMMS, 1, [Define to 1 if your processor understands the "emms" instruction.])
+@@ -84,6 +84,9 @@ AC_RUN_IFELSE([AC_LANG_PROGRAM(
+ ,
+ dnl NO
+ [AC_MSG_RESULT([no])]
++ ,
++ [AC_MSG_RESULT([cross, assume yes])]
++ sigsetjmp=yes
+ )
+
+ AC_MSG_CHECKING([for GNU libc])
diff --git a/srcpkgs/python3-cysignals/template b/srcpkgs/python3-cysignals/template
index da80babe1fcb1..6cd461880c9d6 100644
--- a/srcpkgs/python3-cysignals/template
+++ b/srcpkgs/python3-cysignals/template
@@ -1,19 +1,33 @@
# Template file for 'python3-cysignals'
pkgname=python3-cysignals
-version=1.11.3
+version=1.11.4
revision=1
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython autoconf"
+# need gnu-configure build style to support cross build
+build_style=gnu-configure
+build_helper=python3
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-build python3-installer autoconf"
makedepends="python3-devel pari-devel"
depends="python3"
short_desc="Interrupt and signal handling for Cython"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="LGPL-3.0-or-later"
homepage="https://github.com/sagemath/cysignals"
+changelog="https://github.com/sagemath/cysignals/releases"
distfiles="${PYPI_SITE}/c/cysignals/cysignals-${version}.tar.gz"
-checksum=c2c01f666e5904948952a2250548d8c36ccedd640383791feacf26ea2b958365
-nocross=yes # runs binaries built for target
+checksum=0f1e321e55a07f901c86a36a1e4497f6ff9dfe700681d0130a38c36e4eb238c3
-do_check() {
- make check
+post_patch() {
+ # run autoconf because we patched configure.ac
+ autoconf
+}
+
+do_build() {
+ # build as in python3-pep517 build style
+ python3 -m build --no-isolation --wheel .
+}
+
+do_install() {
+ # install as in python3-pep517 build style
+ python3 -m installer --destdir ${DESTDIR} --no-compile-bytecode dist/*.whl
}
From 4afb2007086bec37c4adf9880a2404bd48dcf1b6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 16:47:38 -0300
Subject: [PATCH 2/6] python3-cypari2: update to 2.1.4, fix cross-build.
---
.../patches/cython3-legacy.patch | 32 ---
.../python3-cypari2/patches/python312.patch | 214 ------------------
srcpkgs/python3-cypari2/template | 14 +-
3 files changed, 8 insertions(+), 252 deletions(-)
delete mode 100644 srcpkgs/python3-cypari2/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-cypari2/patches/python312.patch
diff --git a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch b/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
deleted file mode 100644
index 41392fe80d736..0000000000000
--- a/srcpkgs/python3-cypari2/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-commit 8ef356a4eb936c37f55a5c501f3a955e6740c0c5
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 19:45:23 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/cypari2/gen.pyx b/cypari2/gen.pyx
-index 247b1ad..75050a0 100644
---- a/cypari2/gen.pyx
-+++ b/cypari2/gen.pyx
-@@ -329,7 +329,7 @@ cdef class Gen(Gen_base):
- >>> pari = Pari()
- >>> L = pari("vector(10,i,i^2)")
- >>> L.__iter__()
-- <generator object at ...>
-+ <...generator object at ...>
- >>> [x for x in L]
- [1, 4, 9, 16, 25, 36, 49, 64, 81, 100]
- >>> list(L)
-diff --git a/setup.py b/setup.py
-index 2188711..455337f 100755
---- a/setup.py
-+++ b/setup.py
-@@ -36,6 +36,8 @@ class build_ext(_build_ext):
- "binding": True,
- "cdivision": True,
- "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ "c_api_binop_methods": True,
- }
-
- _build_ext.finalize_options(self)
diff --git a/srcpkgs/python3-cypari2/patches/python312.patch b/srcpkgs/python3-cypari2/patches/python312.patch
deleted file mode 100644
index 255cfb9f1fb75..0000000000000
--- a/srcpkgs/python3-cypari2/patches/python312.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From 0c7e9a1749d67ef1b880283112e968f644e24341 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 07:47:14 -0300
-Subject: [PATCH] Support python 3.12
-
----
- cypari2/Py_SET_SIZE.h | 8 ----
- cypari2/convert.pyx | 27 ++++--------
- cypari2/pycore_long.h | 98 +++++++++++++++++++++++++++++++++++++++++
- cypari2/pycore_long.pxd | 9 ++++
- 4 files changed, 116 insertions(+), 26 deletions(-)
- delete mode 100644 cypari2/Py_SET_SIZE.h
- create mode 100644 cypari2/pycore_long.h
- create mode 100644 cypari2/pycore_long.pxd
-
-diff --git a/cypari2/Py_SET_SIZE.h b/cypari2/Py_SET_SIZE.h
-deleted file mode 100644
-index 5f18ab0..0000000
---- a/cypari2/Py_SET_SIZE.h
-+++ /dev/null
-@@ -1,8 +0,0 @@
--#include "Python.h"
--
--#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
--// The function Py_SET_SIZE is defined starting with python 3.9.
--void Py_SET_SIZE(PyVarObject *o, Py_ssize_t size){
-- Py_SIZE(o) = size;
--}
--#endif
-diff --git a/cypari2/convert.pyx b/cypari2/convert.pyx
-index 7c2ed24..8d39c3c 100644
---- a/cypari2/convert.pyx
-+++ b/cypari2/convert.pyx
-@@ -54,14 +54,8 @@ from libc.math cimport INFINITY
- from .paridecl cimport *
- from .stack cimport new_gen, reset_avma
- from .string_utils cimport to_string, to_bytes
--
--cdef extern from *:
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
--cdef extern from "Py_SET_SIZE.h":
-- void Py_SET_SIZE(py_long o, Py_ssize_t size)
--
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
-
- ########################################################################
- # Conversion PARI -> Python
-@@ -424,7 +418,7 @@ cdef PyLong_FromINT(GEN g):
- cdef Py_ssize_t sizedigits_final = 0
-
- cdef py_long x = _PyLong_New(sizedigits)
-- cdef digit* D = x.ob_digit
-+ cdef digit* D = ob_digit(x)
-
- cdef digit d
- cdef ulong w
-@@ -452,10 +446,7 @@ cdef PyLong_FromINT(GEN g):
- sizedigits_final = i+1
-
- # Set correct size
-- if signe(g) > 0:
-- Py_SET_SIZE(x, sizedigits_final)
-- else:
-- Py_SET_SIZE(x, -sizedigits_final)
-+ _PyLong_SetSignAndDigitCount(x, signe(g), sizedigits_final)
-
- return x
-
-@@ -465,18 +456,18 @@ cdef PyLong_FromINT(GEN g):
- ########################################################################
-
- cdef GEN PyLong_AS_GEN(py_long x):
-- cdef const digit* D = x.ob_digit
-+ cdef const digit* D = ob_digit(x)
-
- # Size of the input
- cdef size_t sizedigits
- cdef long sgn
-- if Py_SIZE(x) == 0:
-+ if _PyLong_IsZero(x):
- return gen_0
-- elif Py_SIZE(x) > 0:
-- sizedigits = Py_SIZE(x)
-+ elif _PyLong_IsPositive(x):
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(1)
- else:
-- sizedigits = -Py_SIZE(x)
-+ sizedigits = _PyLong_DigitCount(x)
- sgn = evalsigne(-1)
-
- # Size of the output, in bits and in words
-diff --git a/cypari2/pycore_long.h b/cypari2/pycore_long.h
-new file mode 100644
-index 0000000..ff1a73d
---- /dev/null
-+++ b/cypari2/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/cypari2/pycore_long.pxd b/cypari2/pycore_long.pxd
-new file mode 100644
-index 0000000..41de637
---- /dev/null
-+++ b/cypari2/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
diff --git a/srcpkgs/python3-cypari2/template b/srcpkgs/python3-cypari2/template
index c93052ba52bce..7e359e790f57e 100644
--- a/srcpkgs/python3-cypari2/template
+++ b/srcpkgs/python3-cypari2/template
@@ -1,18 +1,20 @@
# Template file for 'python3-cypari2'
pkgname=python3-cypari2
-version=2.1.3
-revision=5
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython pari perl"
-makedepends="python3-devel python3-cysignals pari-devel gmp-devel"
+version=2.1.4
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals pari perl"
+makedepends="python3-devel pari-devel gmp-devel"
depends="python3-cysignals"
checkdepends="${depends} python3-pytest"
short_desc="Python interface to the number theory library PARI/GP"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-2.0-or-later"
homepage="https://github.com/sagemath/cypari2"
+changelog="https://github.com/sagemath/cypari2/releases"
distfiles="https://github.com/sagemath/cypari2/archive/refs/tags/${version}.tar.gz"
-checksum=6f6f6ca2b2c2dbef4444727e8fb8652b090cfac4297ba959e94b3a91bbd86548
+checksum=95daf1a74275a35730bbca75144776c1bb0594dd90af82ebf7bf96bb1a52c3d8
do_check() {
# Please do not disable this custom check;
From 4ea682762ee2092deb0b2091751ce85a6f535524 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Tue, 17 Oct 2023 17:28:40 -0300
Subject: [PATCH 3/6] fplll: update to 5.4.5.
---
srcpkgs/fplll/template | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/fplll/template b/srcpkgs/fplll/template
index 9843d46828414..74fb8744ef51a 100644
--- a/srcpkgs/fplll/template
+++ b/srcpkgs/fplll/template
@@ -1,6 +1,6 @@
# Template file for 'fplll'
pkgname=fplll
-version=5.4.4
+version=5.4.5
revision=1
build_style=gnu-configure
makedepends="gmp-devel mpfr-devel"
@@ -10,7 +10,7 @@ license="LGPL-2.1-or-later"
homepage="https://github.com/fplll/fplll"
changelog="https://github.com/fplll/fplll/releases"
distfiles="https://github.com/fplll/fplll/releases/download/${version}/fplll-${version}.tar.gz"
-checksum=0fd9d378f04ff886d8864728baf5d90b8b0b82c1e541e92550644fb54f75691d
+checksum=76d3778f0326597ed7505bab19493a9bf6b73a5c5ca614e8fb82f42105c57d00
fplll-devel_package() {
depends="${makedepends} ${sourcepkg}>=${version}_${revision}"
From 0ad3a572b3ff6dc2ed02ebdd9a7fb076744b7ac5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 17:36:36 -0300
Subject: [PATCH 4/6] python3-fpylll: update to 0.6.0, fix cross-build.
---
.../patches/cython3-legacy.patch | 37 ---
.../python3-fpylll/patches/python312.patch | 213 ------------------
srcpkgs/python3-fpylll/template | 19 +-
3 files changed, 8 insertions(+), 261 deletions(-)
delete mode 100644 srcpkgs/python3-fpylll/patches/cython3-legacy.patch
delete mode 100644 srcpkgs/python3-fpylll/patches/python312.patch
diff --git a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch b/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
deleted file mode 100644
index 808c14e9c1b47..0000000000000
--- a/srcpkgs/python3-fpylll/patches/cython3-legacy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-commit b6e12c2b0648e84b26dcf0aac507a5b4d9dde301
-Author: Gonzalo Tornaría <tornaria@cmat.edu.uy>
-Date: Wed Jul 19 20:38:01 2023 -0300
-
- cython3 support using legacy directives
-
-diff --git a/setup.py b/setup.py
-index 274836f..8fc5af5 100755
---- a/setup.py
-+++ b/setup.py
-@@ -123,7 +123,12 @@ class build_ext(_build_ext, object):
- self.extensions,
- include_path=["src"],
- build_dir=self.cythonize_dir,
-- compiler_directives={"binding": True, "embedsignature": True, "language_level": 2},
-+ compiler_directives={
-+ "binding": True,
-+ "embedsignature": True,
-+ "language_level": 2,
-+ "legacy_implicit_noexcept": True,
-+ },
- )
- super(build_ext, self).run()
-
-diff --git a/src/fpylll/fplll/enumeration_callback_helper.h b/src/fpylll/fplll/enumeration_callback_helper.h
-index c099430..706162f 100644
---- a/src/fpylll/fplll/enumeration_callback_helper.h
-+++ b/src/fpylll/fplll/enumeration_callback_helper.h
-@@ -5,7 +5,7 @@
- #include <Python.h>
- #include <fplll/fplll.h>
-
--extern "C" {
-+extern "C++" {
- bool evaluator_callback_call_obj(PyObject *obj, int n, double *new_sol_coord);
- }
-
diff --git a/srcpkgs/python3-fpylll/patches/python312.patch b/srcpkgs/python3-fpylll/patches/python312.patch
deleted file mode 100644
index d2947a0622a36..0000000000000
--- a/srcpkgs/python3-fpylll/patches/python312.patch
+++ /dev/null
@@ -1,213 +0,0 @@
-From 4ed789aac4eeb1c109cbeb4822fac0b5ff76bd37 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
-Date: Mon, 2 Oct 2023 08:59:00 -0300
-Subject: [PATCH] Support python 3.12
-
----
- src/fpylll/gmp/pycore_long.h | 98 ++++++++++++++++++++++++++++++++++
- src/fpylll/gmp/pycore_long.pxd | 9 ++++
- src/fpylll/gmp/pylong.pxd | 17 +-----
- src/fpylll/gmp/pylong.pyx | 22 ++++----
- 4 files changed, 119 insertions(+), 27 deletions(-)
- create mode 100644 src/fpylll/gmp/pycore_long.h
- create mode 100644 src/fpylll/gmp/pycore_long.pxd
-
-diff --git a/src/fpylll/gmp/pycore_long.h b/src/fpylll/gmp/pycore_long.h
-new file mode 100644
-index 00000000..ff1a73d0
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.h
-@@ -0,0 +1,98 @@
-+#include "Python.h"
-+#include <stdbool.h>
-+
-+#if PY_VERSION_HEX >= 0x030C00A5
-+#define ob_digit(o) (((PyLongObject*)o)->long_value.ob_digit)
-+#else
-+#define ob_digit(o) (((PyLongObject*)o)->ob_digit)
-+#endif
-+
-+#if PY_VERSION_HEX >= 0x030C00A7
-+// taken from cpython:Include/internal/pycore_long.h @ 3.12
-+
-+/* Long value tag bits:
-+ * 0-1: Sign bits value = (1-sign), ie. negative=2, positive=0, zero=1.
-+ * 2: Reserved for immortality bit
-+ * 3+ Unsigned digit count
-+ */
-+#define SIGN_MASK 3
-+#define SIGN_ZERO 1
-+#define SIGN_NEGATIVE 2
-+#define NON_SIZE_BITS 3
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_ZERO;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == SIGN_NEGATIVE;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return (op->long_value.lv_tag & SIGN_MASK) == 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ assert(PyLong_Check(op));
-+ return op->long_value.lv_tag >> NON_SIZE_BITS;
-+}
-+
-+#define TAG_FROM_SIGN_AND_SIZE(sign, size) ((1 - (sign)) | ((size) << NON_SIZE_BITS))
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+ assert(size >= 0);
-+ assert(-1 <= sign && sign <= 1);
-+ assert(sign != 0 || size == 0);
-+ op->long_value.lv_tag = TAG_FROM_SIGN_AND_SIZE(sign, (size_t)size);
-+}
-+
-+#else
-+// fallback for < 3.12
-+
-+static inline bool
-+_PyLong_IsZero(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) == 0;
-+}
-+
-+static inline bool
-+_PyLong_IsNegative(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) < 0;
-+}
-+
-+static inline bool
-+_PyLong_IsPositive(const PyLongObject *op)
-+{
-+ return Py_SIZE(op) > 0;
-+}
-+
-+static inline Py_ssize_t
-+_PyLong_DigitCount(const PyLongObject *op)
-+{
-+ Py_ssize_t size = Py_SIZE(op);
-+ return size < 0 ? -size : size;
-+}
-+
-+static inline void
-+_PyLong_SetSignAndDigitCount(PyLongObject *op, int sign, Py_ssize_t size)
-+{
-+#if (PY_MAJOR_VERSION == 3) && (PY_MINOR_VERSION < 9)
-+// The function Py_SET_SIZE is defined starting with python 3.9.
-+ Py_SIZE(o) = size;
-+#else
-+ Py_SET_SIZE(op, sign < 0 ? -size : size);
-+#endif
-+}
-+
-+#endif
-diff --git a/src/fpylll/gmp/pycore_long.pxd b/src/fpylll/gmp/pycore_long.pxd
-new file mode 100644
-index 00000000..41de637f
---- /dev/null
-+++ b/src/fpylll/gmp/pycore_long.pxd
-@@ -0,0 +1,9 @@
-+from cpython.longintrepr cimport py_long, digit
-+
-+cdef extern from "pycore_long.h":
-+ digit* ob_digit(py_long o)
-+ bint _PyLong_IsZero(py_long o)
-+ bint _PyLong_IsNegative(py_long o)
-+ bint _PyLong_IsPositive(py_long o)
-+ Py_ssize_t _PyLong_DigitCount(py_long o)
-+ void _PyLong_SetSignAndDigitCount(py_long o, int sign, Py_ssize_t size)
-diff --git a/src/fpylll/gmp/pylong.pxd b/src/fpylll/gmp/pylong.pxd
-index 4ec3f47c..c64bcb6a 100644
---- a/src/fpylll/gmp/pylong.pxd
-+++ b/src/fpylll/gmp/pylong.pxd
-@@ -3,23 +3,10 @@
- Various functions to deal with conversion mpz <-> Python int/long
- """
-
--cdef extern from "Python.h":
-- cdef _PyLong_New(Py_ssize_t s)
-- cdef long PyLong_SHIFT
-- ctypedef unsigned int digit
-- ctypedef struct PyLongObject:
-- digit* ob_digit
--
-- ctypedef struct PyObject:
-- pass
--
-- ctypedef struct PyVarObject:
-- PyObject ob_base
-- Py_ssize_t ob_size
--
-+from cpython.longintrepr cimport py_long
- from fpylll.gmp.types cimport *
-
- cdef mpz_get_pylong(mpz_srcptr z)
- cdef mpz_get_pyintlong(mpz_srcptr z)
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1
- cdef Py_hash_t mpz_pythonhash(mpz_srcptr z)
-diff --git a/src/fpylll/gmp/pylong.pyx b/src/fpylll/gmp/pylong.pyx
-index 4b47146f..885d4efe 100644
---- a/src/fpylll/gmp/pylong.pyx
-+++ b/src/fpylll/gmp/pylong.pyx
-@@ -28,6 +28,9 @@ AUTHORS:
-
- from cpython.int cimport PyInt_FromLong
- from cpython.long cimport PyLong_CheckExact, PyLong_FromLong
-+from cpython.longintrepr cimport _PyLong_New, digit, PyLong_SHIFT
-+from .pycore_long cimport (ob_digit, _PyLong_IsZero, _PyLong_IsNegative,
-+ _PyLong_IsPositive, _PyLong_DigitCount, _PyLong_SetSignAndDigitCount)
- from .mpz cimport *
-
- # Unused bits in every PyLong digit
-@@ -40,11 +43,9 @@ cdef mpz_get_pylong_large(mpz_srcptr z):
- """
- cdef size_t nbits = mpz_sizeinbase(z, 2)
- cdef size_t pylong_size = (nbits + PyLong_SHIFT - 1) // PyLong_SHIFT
-- L = _PyLong_New(pylong_size)
-- mpz_export((<PyLongObject*>L).ob_digit, NULL,
-- -1, sizeof(digit), 0, PyLong_nails, z)
-- if mpz_sgn(z) < 0:
-- (<PyVarObject*>L).ob_size = -(<PyVarObject*>L).ob_size
-+ cdef py_long L = _PyLong_New(pylong_size)
-+ mpz_export(ob_digit(L), NULL, -1, sizeof(digit), 0, PyLong_nails, z)
-+ _PyLong_SetSignAndDigitCount(L, mpz_sgn(z), pylong_size)
- return L
-
-
-@@ -67,16 +68,13 @@ cdef mpz_get_pyintlong(mpz_srcptr z):
- return mpz_get_pylong_large(z)
-
-
--cdef int mpz_set_pylong(mpz_ptr z, L) except -1:
-+cdef int mpz_set_pylong(mpz_ptr z, py_long L) except -1:
- """
- Convert a Python ``long`` `L` to an ``mpz``.
- """
-- cdef Py_ssize_t pylong_size = (<PyVarObject*>L).ob_size
-- if pylong_size < 0:
-- pylong_size = -pylong_size
-- mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails,
-- (<PyLongObject*>L).ob_digit)
-- if (<PyVarObject*>L).ob_size < 0:
-+ cdef Py_ssize_t pylong_size = _PyLong_DigitCount(L)
-+ mpz_import(z, pylong_size, -1, sizeof(digit), 0, PyLong_nails, ob_digit(L))
-+ if _PyLong_IsNegative(L):
- mpz_neg(z, z)
-
-
diff --git a/srcpkgs/python3-fpylll/template b/srcpkgs/python3-fpylll/template
index adff12e05ae3a..49bfd4ec0262a 100644
--- a/srcpkgs/python3-fpylll/template
+++ b/srcpkgs/python3-fpylll/template
@@ -1,11 +1,11 @@
# Template file for 'python3-fpylll'
pkgname=python3-fpylll
-version=0.5.9
-revision=3
-build_style=python3-module
-hostmakedepends="python3-Cython"
-makedepends="python3-cysignals python3-devel gmp-devel mpfr-devel fplll-devel
- pari-devel"
+version=0.6.0
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel gmp-devel mpfr-devel fplll-devel pari-devel"
depends="python3"
checkdepends="python3-pytest python3-numpy"
short_desc="Python wrapper to fplll (floating point lattice algorithms)"
@@ -14,13 +14,10 @@ license="GPL-2.0-or-later"
homepage="https://github.com/fplll/fpylll"
changelog="https://github.com/fplll/fpylll/releases"
distfiles="${PYPI_SITE}/f/fpylll/fpylll-${version}.tar.gz"
-checksum=be16d40fd94ddea771ccef44434732dfbf9a88cf15cd5f9020ec7a8197f16358
+checksum=623b4619b6da9fed9ba26b1ac7e8d8e620a06d2a5f7095ee67985c7160d3c3a4
+make_check_pre="env PY_IGNORE_IMPORTMISMATCH=1"
case $XBPS_TARGET_MACHINE in
# skip a test with numerical noise on 32 bit
i686*) make_check_args="-k not(averaged_simulate_prob)" ;;
esac
-
-pre_check() {
- export PY_IGNORE_IMPORTMISMATCH=1
-}
From 74c71ff1f1b4fa068a4de57ab6276a00dc5a1b1d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:11:02 -0300
Subject: [PATCH 5/6] python3-primecountpy: fix cross-build.
---
srcpkgs/python3-primecountpy/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/python3-primecountpy/template b/srcpkgs/python3-primecountpy/template
index 886e5d67c512a..eb3587dbb29c8 100644
--- a/srcpkgs/python3-primecountpy/template
+++ b/srcpkgs/python3-primecountpy/template
@@ -2,9 +2,10 @@
pkgname=python3-primecountpy
version=0.1.0
revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython"
-makedepends="python3-cysignals python3-devel primecount-devel pari-devel"
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython
+ python3-cysignals"
+makedepends="python3-devel primecount-devel pari-devel"
depends="python3"
short_desc="Python interface to the C++ library primecount"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
From 31128cb48972f909fc28b92e7c651aef8287b584 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Gonzalo=20Tornar=C3=ADa?= <tornaria@cmat.edu.uy>
Date: Mon, 16 Oct 2023 18:13:34 -0300
Subject: [PATCH 6/6] python3-pplpy: update to 0.8.9, fix cross-build.
---
.../patches/dont-depend-on-sphinx.patch | 7 +++++++
srcpkgs/python3-pplpy/template | 19 ++++++++++---------
2 files changed, 17 insertions(+), 9 deletions(-)
create mode 100644 srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
diff --git a/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
new file mode 100644
index 0000000000000..65c5cf40d73bd
--- /dev/null
+++ b/srcpkgs/python3-pplpy/patches/dont-depend-on-sphinx.patch
@@ -0,0 +1,7 @@
+--- a/pyproject.toml
++++ b/pyproject.toml
+@@ -1,3 +1,3 @@
+ [build-system]
+-requires = ["setuptools", "wheel", "Cython", "cysignals", "sphinx", "gmpy2>=2.1.0b1"]
++requires = ["setuptools", "wheel", "Cython", "cysignals", "gmpy2>=2.1.0b1"]
+ build-backend = "setuptools.build_meta"
diff --git a/srcpkgs/python3-pplpy/template b/srcpkgs/python3-pplpy/template
index fe6b08dba40f2..4a9c987b2a859 100644
--- a/srcpkgs/python3-pplpy/template
+++ b/srcpkgs/python3-pplpy/template
@@ -1,19 +1,20 @@
# Template file for 'python3-pplpy'
pkgname=python3-pplpy
-version=0.8.7
-revision=4
-build_style=python3-module
-hostmakedepends="python3-setuptools python3-Cython0.29"
-makedepends="python3-cysignals python3-gmpy2 python3-devel gmp-devel
- gmpxx-devel ppl-devel mpfr-devel libmpc-devel pari-devel"
+version=0.8.9
+revision=1
+build_style=python3-pep517
+hostmakedepends="python3-setuptools python3-wheel python3-Cython0.29
+ python3-cysignals python3-gmpy2"
+makedepends="python3-devel gmp-devel gmpxx-devel ppl-devel mpfr-devel
+ libmpc-devel pari-devel"
depends="python3"
short_desc="Python wrapper to the C++ Parma Polyhedra Library (PPL)"
maintainer="Gonzalo Tornaría <tornaria@cmat.edu.uy>"
license="GPL-3.0-or-later"
-homepage="https://gitlab.com/videlec/pplpy"
-changelog="https://gitlab.com/videlec/pplpy/-/raw/master/CHANGES.txt"
+homepage="https://github.com/sagemath/pplpy"
+changelog="https://raw.githubusercontent.com/sagemath/pplpy/master/CHANGES.txt"
distfiles="${PYPI_SITE}/p/pplpy/pplpy-${version}.tar.gz"
-checksum=500bd0f4ae1a76956fae7fcba77854f5ec3e64fce76803664983763c3f2bd8bd
+checksum=db7a3b571d6ef053f75137975e947c3a1c1e45a30bab90eaf215b4e5cc15797e
do_check() {
PYTHONPATH=$(cd build/lib* && pwd) python3 setup.py test
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Merged]: Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
2023-10-16 22:39 [PR PATCH] Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy tornaria
` (9 preceding siblings ...)
2023-10-19 11:23 ` [PR PATCH] [Updated] " tornaria
@ 2023-10-20 0:37 ` ahesford
10 siblings, 0 replies; 12+ messages in thread
From: ahesford @ 2023-10-20 0:37 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1567 bytes --]
There's a merged pull request on the void-packages repository
Fix cross-build for cysignals, cypari2, fpylll, primecountpy, pplpy
https://github.com/void-linux/void-packages/pull/46738
Description:
Summary of changes:
- python3-cysignals: update to 1.11.4, fix cross-build.
- python3-cypari2: update to 2.1.4, fix cross-build.
- fplll: update to 5.4.5.
- python3-fpylll: update to 0.6.0, fix cross-build.
- python3-primecountpy: fix cross-build.
- python3-pplpy: update to 0.8.9, fix cross-build.
#### Testing the changes
- I tested the changes in this PR: **briefly**
Note that pplpy is still building with Cython0.29 as the cython version has to match the one used to build sagemath. We'll switch to Cython 3 when sagemath 10.2 is released.
@dkwo some cross pkgs for you.
<!--
#### New package
- This new package conforms to the [package requirements](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#package-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please add ci skip tag as described in
https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
^ permalink raw reply [flat|nested] 12+ messages in thread