[-- Attachment #1: Type: text/plain, Size: 1625 bytes --] There is a new pull request by paper42 against master on the void-packages repository https://github.com/paper42/void-packages 0001-audit-update-to-3.0.patch https://github.com/void-linux/void-packages/pull/28447 audit: update to 3.0 <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [x] I generally don't use the affected packages but briefly tested this PR ping @CameronNemo <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/28447.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-0001-audit-update-to-3.0.patch-28447.patch --] [-- Type: text/x-diff, Size: 7609 bytes --] From f785fab90c8516d7369fcfab2ca2dfcc5b310837 Mon Sep 17 00:00:00 2001 From: Paper <paper@tilde.institute> Date: Wed, 3 Feb 2021 20:30:36 +0100 Subject: [PATCH] audit: update to 3.0 --- ...uparse-caused-by-corrected-event-ord.patch | 31 ------ ...uparse-caused-by-corrected-event-ord.patch | 41 -------- srcpkgs/audit/patches/musl.patch | 97 ------------------- srcpkgs/audit/template | 7 +- 4 files changed, 4 insertions(+), 172 deletions(-) delete mode 100644 srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch delete mode 100644 srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch delete mode 100644 srcpkgs/audit/patches/musl.patch diff --git a/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch b/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch deleted file mode 100644 index 0c2b320bb0a..00000000000 --- a/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch +++ /dev/null @@ -1,31 +0,0 @@ -From c2544c220bb1b1045589ceae3dbb69f195b860e5 Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Mar 2019 09:18:00 -0400 -Subject: [PATCH 1/2] Fix memleak in auparse caused by corrected event ordering - ---- - auparse/auparse.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git auparse/auparse.c auparse/auparse.c -index 34aa90c..ecea88e 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -265,6 +265,14 @@ static event_list_t *au_get_ready_event(auparse_state_t *au, int is_test) - au_lolnode *ptr = lowest; - while (ptr->status == EBS_EMPTY && lol->maxi > 0) { - lol->maxi--; -+ if (ptr->l) { -+ aup_list_clear(ptr->l); -+ free(ptr->l); -+ ptr->l = NULL; -+ au->le = NULL; // this should crash -+ // usage of au->le -+ // until reset -+ } - ptr = &lol->array[lol->maxi]; - } - } --- -2.24.0 - diff --git a/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch b/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch deleted file mode 100644 index ed6a8991131..00000000000 --- a/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch +++ /dev/null @@ -1,41 +0,0 @@ -From ce0debf94f93d787d3bed635952133b2a5ff3551 Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Mar 2019 17:24:37 -0400 -Subject: [PATCH 2/2] Fix memleak in auparse caused by corrected event ordering - part 2 - ---- - auparse/auparse.c | 17 ----------------- - 1 file changed, 17 deletions(-) - -diff --git auparse/auparse.c auparse/auparse.c -index ecea88e..5318d25 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -259,23 +259,6 @@ static event_list_t *au_get_ready_event(auparse_state_t *au, int is_test) - if (lowest && lowest->status == EBS_COMPLETE) { - lowest->status = EBS_EMPTY; - au->au_ready--; -- // Try to consolidate the array so that we iterate -- // over a smaller portion next time -- if (lowest == &lol->array[lol->maxi]) { -- au_lolnode *ptr = lowest; -- while (ptr->status == EBS_EMPTY && lol->maxi > 0) { -- lol->maxi--; -- if (ptr->l) { -- aup_list_clear(ptr->l); -- free(ptr->l); -- ptr->l = NULL; -- au->le = NULL; // this should crash -- // usage of au->le -- // until reset -- } -- ptr = &lol->array[lol->maxi]; -- } -- } - return lowest->l; - } - --- -2.24.0 - diff --git a/srcpkgs/audit/patches/musl.patch b/srcpkgs/audit/patches/musl.patch deleted file mode 100644 index ba5942a99f0..00000000000 --- a/srcpkgs/audit/patches/musl.patch +++ /dev/null @@ -1,97 +0,0 @@ -From d579a08bb1cde71f939c13ac6b2261052ae9f77e Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Feb 2019 18:33:33 -0500 -Subject: [PATCH] Add substitue functions for strndupa & rawmemchr - -diff --git auparse/auparse.c auparse/auparse.c -index 69127b7a..042ea2b0 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -1119,6 +1119,16 @@ static int str2event(char *s, au_event_t *e) - return 0; - } - -+#ifndef HAVE_STRNDUPA -+static inline char *strndupa(const char *old, size_t n) -+{ -+ size_t len = strnlen(old, n); -+ char *tmp = alloca(len + 1); -+ tmp[len] = 0; -+ return memcpy(tmp, old, len); -+} -+#endif -+ - /* Returns 0 on success and 1 on error */ - static int extract_timestamp(const char *b, au_event_t *e) - { -diff --git auparse/interpret.c auparse/interpret.c -index 88523c6d..f19ee854 100644 ---- auparse/interpret.c -+++ auparse/interpret.c -@@ -855,6 +855,13 @@ static const char *print_escaped_ext(const idata *id) - return print_escaped(id->val); - } - -+// rawmemchr is faster. Let's use it if we have it. -+#ifdef HAVE_RAWMEMCHR -+#define STRCHR rawmemchr -+#else -+#define STRCHR strchr -+#endif -+ - static const char *print_proctitle(const char *val) - { - char *out = (char *)print_escaped(val); -@@ -865,7 +872,7 @@ static const char *print_proctitle(const char *val) - // Proctitle has arguments separated by NUL bytes - // We need to write over the NUL bytes with a space - // so that we can see the arguments -- while ((ptr = rawmemchr(ptr, '\0'))) { -+ while ((ptr = STRCHR(ptr, '\0'))) { - if (ptr >= end) - break; - *ptr = ' '; -diff --git configure.ac configure.ac -index acd6d615..00658d4f 100644 ---- configure.ac -+++ configure.ac -@@ -72,6 +72,18 @@ dnl; posix_fallocate is used in audisp-remote - AC_CHECK_FUNCS([posix_fallocate]) - dnl; signalfd is needed for libev - AC_CHECK_FUNC([signalfd], [], [ AC_MSG_ERROR([The signalfd system call is necessary for auditd]) ]) -+dnl; check if rawmemchr is available -+AC_CHECK_FUNCS([rawmemchr]) -+dnl; check if strndupa is available -+AC_LINK_IFELSE( -+ [AC_LANG_SOURCE( -+ [[ -+ #define _GNU_SOURCE -+ #include <string.h> -+ int main() { (void) strndupa("test", 10); return 0; }]])], -+ [AC_DEFINE(HAVE_STRNDUPA, 1, [Let us know if we have it or not])], -+ [] -+) - - ALLWARNS="" - ALLDEBUG="-g" -diff --git src/ausearch-lol.c src/ausearch-lol.c -index bebbcf4b..0babd517 100644 ---- src/ausearch-lol.c -+++ src/ausearch-lol.c -@@ -152,6 +152,16 @@ static int compare_event_time(event *e1, event *e2) - return 0; - } - -+#ifndef HAVE_STRNDUPA -+static inline char *strndupa(const char *old, size_t n) -+{ -+ size_t len = strnlen(old, n); -+ char *tmp = alloca(len + 1); -+ tmp[len] = 0; -+ return memcpy(tmp, old, len); -+} -+#endif -+ - /* - * This function will look at the line and pick out pieces of it. - */ diff --git a/srcpkgs/audit/template b/srcpkgs/audit/template index 3294ac19927..9c900942dbb 100644 --- a/srcpkgs/audit/template +++ b/srcpkgs/audit/template @@ -1,7 +1,7 @@ # Template file for 'audit' pkgname=audit -version=2.8.5 -revision=5 +version=3.0 +revision=1 build_style=gnu-configure configure_args="--libdir=/usr/lib --enable-shared=audit --enable-gssapi-krb5 --with-apparmor --with-libcap-ng --with-python3" @@ -13,8 +13,9 @@ short_desc="Linux Security Auditing Framework" maintainer="Cameron Nemo <cnemo@tutanota.com>" license="GPL-2.0-or-later, LGPL-2.0-or-later" homepage="https://people.redhat.com/sgrubb/audit" +changelog="https://raw.githubusercontent.com/linux-audit/audit-userspace/master/ChangeLog" distfiles="${homepage}/${pkgname}-${version}.tar.gz" -checksum=0e5d4103646e00f8d1981e1cd2faea7a2ae28e854c31a803e907a383c5e2ecb7 +checksum=bd31826823b912b6fe271d2d979ed879e9fc393cab1e2f7c4e1af258231765b8 CFLAGS="-fcommon"
[-- Attachment #1: Type: text/plain, Size: 154 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-772778788 Comment: @CameronNemo
[-- Attachment #1: Type: text/plain, Size: 153 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-776358215 Comment: 3.0.1 is out
[-- Attachment #1: Type: text/plain, Size: 179 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-772778788 Comment: @CameronNemo - this was unnecessary :P
[-- Attachment #1: Type: text/plain, Size: 294 bytes --] New comment by paper42 on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-776592818 Comment: Is there really 3.0.1? from their website: > The latest stable release is 3.0, released December 16, 2020. and the latest tag on github is also 3.0
[-- Attachment #1: Type: text/plain, Size: 275 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-776708443 Comment: I saw it in https://raw.githubusercontent.com/linux-audit/audit-userspace/master/ChangeLog , but maybe that's the development version.
[-- Attachment #1: Type: text/plain, Size: 156 bytes --] New comment by paper42 on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-776783229 Comment: it seems to be
[-- Attachment #1: Type: text/plain, Size: 183 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-779358453 Comment: Any idea what the failing test on musl is?
[-- Attachment #1: Type: text/plain, Size: 186 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-779359836 Comment: And 3.0.1 has definitely been released now :)
[-- Attachment #1: Type: text/plain, Size: 1195 bytes --] New comment by paper42 on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-779440381 Comment: ``` $ lib/test/lookup_test Testing i386_table... Testing ppc_table... Testing s390_table... Testing s390x_table... Testing x86_64_table... Testing actiontab... Testing errtab... Testing fieldtab... Unexpected match `A1' ``` the test failing is on [line 281](https://github.com/linux-audit/audit-userspace/blob/master/lib/test/lookup_test.c#L281) which calls TEST_S2I which contains this part: ```c /* Blindly assuming this will not generate a \ meaningful identifier. */ \ gen_id(buf); \ if (S2I(buf) != (ERR_VALUE)) { \ fprintf(stderr, \ "Unexpected match `%s'\n", \ buf); \ abort(); \ } \ ``` ERR_VALUE = -1 and S2I(buf) = 201, so it seems to me like it actually generated a valid identifier, but I am a bit lost.
[-- Attachment #1: Type: text/plain, Size: 1630 bytes --] There is an updated pull request by paper42 against master on the void-packages repository https://github.com/paper42/void-packages 0001-audit-update-to-3.0.patch https://github.com/void-linux/void-packages/pull/28447 audit: update to 3.0 <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [x] I generally don't use the affected packages but briefly tested this PR ping @CameronNemo <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl --> A patch file from https://github.com/void-linux/void-packages/pull/28447.patch is attached [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: github-pr-0001-audit-update-to-3.0.patch-28447.patch --] [-- Type: text/x-diff, Size: 7613 bytes --] From 9776d08cf83f4b6302216f2853f55e4504634440 Mon Sep 17 00:00:00 2001 From: Paper <paper@tilde.institute> Date: Wed, 3 Feb 2021 20:30:36 +0100 Subject: [PATCH] audit: update to 3.0.1 --- ...uparse-caused-by-corrected-event-ord.patch | 31 ------ ...uparse-caused-by-corrected-event-ord.patch | 41 -------- srcpkgs/audit/patches/musl.patch | 97 ------------------- srcpkgs/audit/template | 7 +- 4 files changed, 4 insertions(+), 172 deletions(-) delete mode 100644 srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch delete mode 100644 srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch delete mode 100644 srcpkgs/audit/patches/musl.patch diff --git a/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch b/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch deleted file mode 100644 index 0c2b320bb0a..00000000000 --- a/srcpkgs/audit/patches/0001-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch +++ /dev/null @@ -1,31 +0,0 @@ -From c2544c220bb1b1045589ceae3dbb69f195b860e5 Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Mar 2019 09:18:00 -0400 -Subject: [PATCH 1/2] Fix memleak in auparse caused by corrected event ordering - ---- - auparse/auparse.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - -diff --git auparse/auparse.c auparse/auparse.c -index 34aa90c..ecea88e 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -265,6 +265,14 @@ static event_list_t *au_get_ready_event(auparse_state_t *au, int is_test) - au_lolnode *ptr = lowest; - while (ptr->status == EBS_EMPTY && lol->maxi > 0) { - lol->maxi--; -+ if (ptr->l) { -+ aup_list_clear(ptr->l); -+ free(ptr->l); -+ ptr->l = NULL; -+ au->le = NULL; // this should crash -+ // usage of au->le -+ // until reset -+ } - ptr = &lol->array[lol->maxi]; - } - } --- -2.24.0 - diff --git a/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch b/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch deleted file mode 100644 index ed6a8991131..00000000000 --- a/srcpkgs/audit/patches/0002-Fix-memleak-in-auparse-caused-by-corrected-event-ord.patch +++ /dev/null @@ -1,41 +0,0 @@ -From ce0debf94f93d787d3bed635952133b2a5ff3551 Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Mar 2019 17:24:37 -0400 -Subject: [PATCH 2/2] Fix memleak in auparse caused by corrected event ordering - part 2 - ---- - auparse/auparse.c | 17 ----------------- - 1 file changed, 17 deletions(-) - -diff --git auparse/auparse.c auparse/auparse.c -index ecea88e..5318d25 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -259,23 +259,6 @@ static event_list_t *au_get_ready_event(auparse_state_t *au, int is_test) - if (lowest && lowest->status == EBS_COMPLETE) { - lowest->status = EBS_EMPTY; - au->au_ready--; -- // Try to consolidate the array so that we iterate -- // over a smaller portion next time -- if (lowest == &lol->array[lol->maxi]) { -- au_lolnode *ptr = lowest; -- while (ptr->status == EBS_EMPTY && lol->maxi > 0) { -- lol->maxi--; -- if (ptr->l) { -- aup_list_clear(ptr->l); -- free(ptr->l); -- ptr->l = NULL; -- au->le = NULL; // this should crash -- // usage of au->le -- // until reset -- } -- ptr = &lol->array[lol->maxi]; -- } -- } - return lowest->l; - } - --- -2.24.0 - diff --git a/srcpkgs/audit/patches/musl.patch b/srcpkgs/audit/patches/musl.patch deleted file mode 100644 index ba5942a99f0..00000000000 --- a/srcpkgs/audit/patches/musl.patch +++ /dev/null @@ -1,97 +0,0 @@ -From d579a08bb1cde71f939c13ac6b2261052ae9f77e Mon Sep 17 00:00:00 2001 -From: Steve Grubb <sgrubb@redhat.com> -Date: Tue, 26 Feb 2019 18:33:33 -0500 -Subject: [PATCH] Add substitue functions for strndupa & rawmemchr - -diff --git auparse/auparse.c auparse/auparse.c -index 69127b7a..042ea2b0 100644 ---- auparse/auparse.c -+++ auparse/auparse.c -@@ -1119,6 +1119,16 @@ static int str2event(char *s, au_event_t *e) - return 0; - } - -+#ifndef HAVE_STRNDUPA -+static inline char *strndupa(const char *old, size_t n) -+{ -+ size_t len = strnlen(old, n); -+ char *tmp = alloca(len + 1); -+ tmp[len] = 0; -+ return memcpy(tmp, old, len); -+} -+#endif -+ - /* Returns 0 on success and 1 on error */ - static int extract_timestamp(const char *b, au_event_t *e) - { -diff --git auparse/interpret.c auparse/interpret.c -index 88523c6d..f19ee854 100644 ---- auparse/interpret.c -+++ auparse/interpret.c -@@ -855,6 +855,13 @@ static const char *print_escaped_ext(const idata *id) - return print_escaped(id->val); - } - -+// rawmemchr is faster. Let's use it if we have it. -+#ifdef HAVE_RAWMEMCHR -+#define STRCHR rawmemchr -+#else -+#define STRCHR strchr -+#endif -+ - static const char *print_proctitle(const char *val) - { - char *out = (char *)print_escaped(val); -@@ -865,7 +872,7 @@ static const char *print_proctitle(const char *val) - // Proctitle has arguments separated by NUL bytes - // We need to write over the NUL bytes with a space - // so that we can see the arguments -- while ((ptr = rawmemchr(ptr, '\0'))) { -+ while ((ptr = STRCHR(ptr, '\0'))) { - if (ptr >= end) - break; - *ptr = ' '; -diff --git configure.ac configure.ac -index acd6d615..00658d4f 100644 ---- configure.ac -+++ configure.ac -@@ -72,6 +72,18 @@ dnl; posix_fallocate is used in audisp-remote - AC_CHECK_FUNCS([posix_fallocate]) - dnl; signalfd is needed for libev - AC_CHECK_FUNC([signalfd], [], [ AC_MSG_ERROR([The signalfd system call is necessary for auditd]) ]) -+dnl; check if rawmemchr is available -+AC_CHECK_FUNCS([rawmemchr]) -+dnl; check if strndupa is available -+AC_LINK_IFELSE( -+ [AC_LANG_SOURCE( -+ [[ -+ #define _GNU_SOURCE -+ #include <string.h> -+ int main() { (void) strndupa("test", 10); return 0; }]])], -+ [AC_DEFINE(HAVE_STRNDUPA, 1, [Let us know if we have it or not])], -+ [] -+) - - ALLWARNS="" - ALLDEBUG="-g" -diff --git src/ausearch-lol.c src/ausearch-lol.c -index bebbcf4b..0babd517 100644 ---- src/ausearch-lol.c -+++ src/ausearch-lol.c -@@ -152,6 +152,16 @@ static int compare_event_time(event *e1, event *e2) - return 0; - } - -+#ifndef HAVE_STRNDUPA -+static inline char *strndupa(const char *old, size_t n) -+{ -+ size_t len = strnlen(old, n); -+ char *tmp = alloca(len + 1); -+ tmp[len] = 0; -+ return memcpy(tmp, old, len); -+} -+#endif -+ - /* - * This function will look at the line and pick out pieces of it. - */ diff --git a/srcpkgs/audit/template b/srcpkgs/audit/template index 3294ac19927..b4cf2b06401 100644 --- a/srcpkgs/audit/template +++ b/srcpkgs/audit/template @@ -1,7 +1,7 @@ # Template file for 'audit' pkgname=audit -version=2.8.5 -revision=5 +version=3.0.1 +revision=1 build_style=gnu-configure configure_args="--libdir=/usr/lib --enable-shared=audit --enable-gssapi-krb5 --with-apparmor --with-libcap-ng --with-python3" @@ -13,8 +13,9 @@ short_desc="Linux Security Auditing Framework" maintainer="Cameron Nemo <cnemo@tutanota.com>" license="GPL-2.0-or-later, LGPL-2.0-or-later" homepage="https://people.redhat.com/sgrubb/audit" +changelog="https://raw.githubusercontent.com/linux-audit/audit-userspace/master/ChangeLog" distfiles="${homepage}/${pkgname}-${version}.tar.gz" -checksum=0e5d4103646e00f8d1981e1cd2faea7a2ae28e854c31a803e907a383c5e2ecb7 +checksum=994c4250d8fd43f3087a3c2ce73461832e30f1e9b278bf5bb03c3e07091155a5 CFLAGS="-fcommon"
[-- Attachment #1: Type: text/plain, Size: 4144 bytes --] New comment by ericonr on void-packages repository https://github.com/void-linux/void-packages/pull/28447#issuecomment-812803391 Comment: Having fixed that, there's still a failure here which I don't understand, but it also happens in previous versions, so not holding back for it: ``` make auparse_test auparselol_test lookup_test \ auparse_test.py make[4]: Entering directory '/builddir/audit-3.0.1/auparse/test' cc -DHAVE_CONFIG_H -I. -I../.. -I../../auparse -I../../lib -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -MT auparse_test.o -MD -MP -MF .deps/auparse_test.Tpo -c -o auparse_test.o auparse_test.c mv -f .deps/auparse_test.Tpo .deps/auparse_test.Po /bin/sh ../../libtool --tag=CC --mode=link cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -static -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o auparse_test auparse_test.o ../../auparse/libauparse.la ../../lib/libaudit.la ../../common/libaucommon.la libtool: link: cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -o auparse_test auparse_test.o ../../auparse/.libs/libauparse.a /builddir/audit-3.0.1/lib/.libs/libaudit.a ../../lib/.libs/libaudit.a -lcap-ng ../../common/.libs/libaucommon.a cc -DHAVE_CONFIG_H -I. -I../.. -I../../auparse -I../../lib -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -MT auparselol_test.o -MD -MP -MF .deps/auparselol_test.Tpo -c -o auparselol_test.o auparselol_test.c mv -f .deps/auparselol_test.Tpo .deps/auparselol_test.Po /bin/sh ../../libtool --tag=CC --mode=link cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -static -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o auparselol_test auparselol_test.o ../../auparse/libauparse.la ../../lib/libaudit.la ../../common/libaucommon.la libtool: link: cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -o auparselol_test auparselol_test.o ../../auparse/.libs/libauparse.a /builddir/audit-3.0.1/lib/.libs/libaudit.a ../../lib/.libs/libaudit.a -lcap-ng ../../common/.libs/libaucommon.a cc -DHAVE_CONFIG_H -I. -I../.. -I../../auparse -I../../lib -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -MT lookup_test.o -MD -MP -MF .deps/lookup_test.Tpo -c -o lookup_test.o lookup_test.c mv -f .deps/lookup_test.Tpo .deps/lookup_test.Po /bin/sh ../../libtool --tag=CC --mode=link cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -Wl,-z,relro -Wl,-z,now -Wl,--as-needed -o lookup_test lookup_test.o ../../auparse/libauparse.la ../../lib/libaudit.la ../../common/libaucommon.la libtool: link: cc -fstack-clash-protection -D_FORTIFY_SOURCE=2 -mtune=generic -O2 -pipe -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,--as-needed -o .libs/lookup_test lookup_test.o ../../auparse/.libs/libauparse.so /builddir/audit-3.0.1/lib/.libs/libaudit.so ../../lib/.libs/libaudit.so -lcap-ng ../../common/.libs/libaucommon.a make[4]: Nothing to be done for 'auparse_test.py'. make[4]: Leaving directory '/builddir/audit-3.0.1/auparse/test' make check-local make[4]: Entering directory '/builddir/audit-3.0.1/auparse/test' test "../.." = "../.." || \ cp ../../auparse/test/test*.log . LC_ALL=C \ ./auparse_test > auparse_test.cur Config file /etc/audit/auditd.conf doesn't exist, skipping make[4]: *** [Makefile:708: check-local] Error 1 make[4]: Leaving directory '/builddir/audit-3.0.1/auparse/test' make[3]: *** [Makefile:579: check-am] Error 2 make[3]: Leaving directory '/builddir/audit-3.0.1/auparse/test' make[2]: *** [Makefile:2038: check-recursive] Error 1 make[2]: Leaving directory '/builddir/audit-3.0.1/auparse' make[1]: *** [Makefile:2190: check] Error 2 make[1]: Leaving directory '/builddir/audit-3.0.1/auparse' make: *** [Makefile:465: check-recursive] Error 1 => ERROR: audit-3.0.1_1: do_check: '${make_cmd} ${make_check_args} ${make_check_target}' exited with 2 => ERROR: in do_check() at common/build-style/gnu-configure.sh:33 ```
[-- Attachment #1: Type: text/plain, Size: 1451 bytes --] There's a closed pull request on the void-packages repository audit: update to 3.0 https://github.com/void-linux/void-packages/pull/28447 Description: <!-- Mark items with [x] where applicable --> #### General - [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements) #### Have the results of the proposed changes been tested? - [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me - [x] I generally don't use the affected packages but briefly tested this PR ping @CameronNemo <!-- If GitHub CI cannot be used to validate the build result (for example, if the build is likely to take several hours), make sure to [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration). When skipping CI, uncomment and fill out the following section. Note: for builds that are likely to complete in less than 2 hours, it is not acceptable to skip CI. --> <!-- #### Does it build and run successfully? (Please choose at least one native build and, if supported, at least one cross build. More are better.) - [ ] I built this PR locally for my native architecture, (ARCH-LIBC) - [ ] I built this PR locally for these architectures (if supported. mark crossbuilds): - [ ] aarch64-musl - [ ] armv7l - [ ] armv6l-musl -->