Github messages for voidlinux
 help / color / mirror / Atom feed
* [PR PATCH] opam: add dependency on bubblewrap.
@ 2021-02-22 16:26 CMB
  2021-02-22 17:59 ` [PR PATCH] [Merged]: " ericonr
  0 siblings, 1 reply; 2+ messages in thread
From: CMB @ 2021-02-22 16:26 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 2240 bytes --]

There is a new pull request by CMB against master on the void-packages repository

https://github.com/CMB/void-packages opam-deps
https://github.com/void-linux/void-packages/pull/28976

opam: add dependency on bubblewrap.
[chris@cmbvm ~]$ opam init
[NOTE] Will configure from built-in defaults.
Checking for available remotes: rsync and local, git.
  - you won't be able to use mercurial repositories unless you install
    the hg     command on your system.
  - you won't be able to use darcs repositories unless you install
    the darcs     command on your system.

[ERROR] Missing dependencies -- the following commands are required
for opam to         operate:
  - bwrap: Sandboxing tool bwrap was not found. You should install
    'bubblewrap'. See
    https://opam.ocaml.org/doc/FAQ.html#Why-does-opam-require-bwrap.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ x] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ x] I built this PR locally for my native architecture, (x86_64-musl)
- [ x] I built this PR locally for my native architecture, (x86_64)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/28976.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-opam-deps-28976.patch --]
[-- Type: text/x-diff, Size: 1536 bytes --]

From bb0e23ebdd6b4ca31993f976299e3b44b284813a Mon Sep 17 00:00:00 2001
From: Christopher Brannon <chris@the-brannons.com>
Date: Fri, 19 Feb 2021 07:48:26 -0800
Subject: [PATCH] opam: add dependency on bubblewrap.

[chris@cmbvm ~]$ opam init
[NOTE] Will configure from built-in defaults.
Checking for available remotes: rsync and local, git.
  - you won't be able to use mercurial repositories unless you install
    the hg     command on your system.
  - you won't be able to use darcs repositories unless you install
    the darcs     command on your system.

[ERROR] Missing dependencies -- the following commands are required
for opam to         operate:
  - bwrap: Sandboxing tool bwrap was not found. You should install
    'bubblewrap'. See
    https://opam.ocaml.org/doc/FAQ.html#Why-does-opam-require-bwrap.
---
 srcpkgs/opam/template | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/srcpkgs/opam/template b/srcpkgs/opam/template
index be9a59f309b..ec430863b4d 100644
--- a/srcpkgs/opam/template
+++ b/srcpkgs/opam/template
@@ -1,13 +1,13 @@
 # Template file for 'opam'
 pkgname=opam
 version=2.0.8
-revision=1
+revision=2
 build_style=gnu-configure
 configure_args="--docdir=/usr/share/doc/${pkgname}"
 make_build_args="lib-ext all"
 make_check_target="tests"
 makedepends="curl ncurses-devel ocaml ocaml-findlib tar"
-depends="curl patch unzip"
+depends="bubblewrap curl patch unzip"
 checkdepends="${depends} git rsync"
 short_desc="OCaml package manager"
 maintainer="Leah Neukirchen <leah@vuxu.org>"

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PR PATCH] [Merged]: opam: add dependency on bubblewrap.
  2021-02-22 16:26 [PR PATCH] opam: add dependency on bubblewrap CMB
@ 2021-02-22 17:59 ` ericonr
  0 siblings, 0 replies; 2+ messages in thread
From: ericonr @ 2021-02-22 17:59 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 2095 bytes --]

There's a merged pull request on the void-packages repository

opam: add dependency on bubblewrap.
https://github.com/void-linux/void-packages/pull/28976

Description:
[chris@cmbvm ~]$ opam init
[NOTE] Will configure from built-in defaults.
Checking for available remotes: rsync and local, git.
  - you won't be able to use mercurial repositories unless you install
    the hg     command on your system.
  - you won't be able to use darcs repositories unless you install
    the darcs     command on your system.

[ERROR] Missing dependencies -- the following commands are required
for opam to         operate:
  - bwrap: Sandboxing tool bwrap was not found. You should install
    'bubblewrap'. See
    https://opam.ocaml.org/doc/FAQ.html#Why-does-opam-require-bwrap.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ x] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ x] I built this PR locally for my native architecture, (x86_64-musl)
- [ x] I built this PR locally for my native architecture, (x86_64)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-02-22 17:59 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-22 16:26 [PR PATCH] opam: add dependency on bubblewrap CMB
2021-02-22 17:59 ` [PR PATCH] [Merged]: " ericonr

Github messages for voidlinux

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.vuxu.org/voidlinux-github

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V1 voidlinux-github voidlinux-github/ http://inbox.vuxu.org/voidlinux-github \
		voidlinux-github@inbox.vuxu.org
	public-inbox-index voidlinux-github

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.vuxu.org/vuxu.github.voidlinux


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git