From: noarchwastaken <noarchwastaken@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: [PR PATCH] apparmor: fix dnsmasq profile
Date: Sun, 11 Apr 2021 06:01:51 +0200 [thread overview]
Message-ID: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-30142@inbox.vuxu.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 1631 bytes --]
There is a new pull request by noarchwastaken against master on the void-packages repository
https://github.com/noarchwastaken/void-packages apparmor-dnsmasq
https://github.com/void-linux/void-packages/pull/30142
apparmor: fix dnsmasq profile
Closes #29343
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/30142.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-apparmor-dnsmasq-30142.patch --]
[-- Type: text/x-diff, Size: 5128 bytes --]
From 751860552b3c14d1a4384e6cc460d0d462af7f41 Mon Sep 17 00:00:00 2001
From: noarchwastaken <noarch@n0ar.ch>
Date: Sat, 10 Apr 2021 23:48:59 -0400
Subject: [PATCH] apparmor: fix dnsmasq profile
---
.../apparmor/files/profiles/usr.sbin.dnsmasq | 136 ++++++++++++++++++
srcpkgs/apparmor/template | 2 +-
2 files changed, 137 insertions(+), 1 deletion(-)
create mode 100644 srcpkgs/apparmor/files/profiles/usr.sbin.dnsmasq
diff --git a/srcpkgs/apparmor/files/profiles/usr.sbin.dnsmasq b/srcpkgs/apparmor/files/profiles/usr.sbin.dnsmasq
new file mode 100644
index 000000000000..27a2d46049f5
--- /dev/null
+++ b/srcpkgs/apparmor/files/profiles/usr.sbin.dnsmasq
@@ -0,0 +1,136 @@
+# ------------------------------------------------------------------
+#
+# Copyright (C) 2009 John Dong <jdong@ubuntu.com>
+# Copyright (C) 2010 Canonical Ltd.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of version 2 of the GNU General Public
+# License published by the Free Software Foundation.
+#
+# ------------------------------------------------------------------
+
+# vim:syntax=apparmor
+
+abi <abi/3.0>,
+
+@{TFTP_DIR}=/var/tftp /srv/tftp /srv/tftpboot
+
+include <tunables/global>
+profile dnsmasq /usr/{bin,sbin}/dnsmasq flags=(attach_disconnected) {
+ include <abstractions/base>
+ include <abstractions/dbus>
+ include <abstractions/nameservice>
+
+ capability chown,
+ capability net_bind_service,
+ capability setgid,
+ capability setuid,
+ capability dac_override,
+ capability net_admin, # for DHCP server
+ capability net_raw, # for DHCP server ping checks
+ network inet raw,
+ network inet6 raw,
+
+ signal (receive) peer=/usr/{bin,sbin}/libvirtd,
+ signal (receive) peer=libvirtd,
+ ptrace (readby) peer=/usr/{bin,sbin}/libvirtd,
+ ptrace (readby) peer=libvirtd,
+
+ owner /dev/tty rw,
+
+ @{PROC}/@{pid}/fd/ r,
+
+ /etc/dnsmasq.conf r,
+ /etc/dnsmasq.d/ r,
+ /etc/dnsmasq.d/* r,
+ /etc/dnsmasq.d-available/ r,
+ /etc/dnsmasq.d-available/* r,
+ /etc/ethers r,
+ /etc/NetworkManager/dnsmasq.d/ r,
+ /etc/NetworkManager/dnsmasq.d/* r,
+ /etc/NetworkManager/dnsmasq-shared.d/ r,
+ /etc/NetworkManager/dnsmasq-shared.d/* r,
+ /etc/dnsmasq-conf.conf r,
+ /etc/dnsmasq-resolv.conf r,
+
+ /usr/{bin,sbin}/dnsmasq mr,
+
+ /var/log/dnsmasq*.log w,
+
+ /usr/share/dnsmasq{-base,}/ r,
+ /usr/share/dnsmasq{-base,}/* r,
+
+ @{run}/*dnsmasq*.pid w,
+ @{run}/dnsmasq-forwarders.conf r,
+ @{run}/dnsmasq/ r,
+ @{run}/dnsmasq/* rw,
+
+ /var/lib/misc/dnsmasq.leases rw, # Required only for DHCP server usage
+
+ /{,usr/}bin/{ba,da,}sh ix, # Required to execute --dhcp-script argument
+
+ # access to iface mtu needed for Router Advertisement messages in IPv6
+ # Neighbor Discovery protocol (RFC 2461)
+ @{PROC}/sys/net/ipv6/conf/*/mtu r,
+
+ # for the read-only TFTP server
+ @{TFTP_DIR}/ r,
+ @{TFTP_DIR}/** r,
+
+ # libvirt config and hosts file for dnsmasq
+ /var/lib/libvirt/dnsmasq/ r,
+ /var/lib/libvirt/dnsmasq/* r,
+
+ # libvirt pid files for dnsmasq
+ @{run}/libvirt/network/ r,
+ @{run}/libvirt/network/*.pid rw,
+
+ # libvirt lease helper
+ /usr/lib{,64}/libvirt/libvirt_leaseshelper Cx -> libvirt_leaseshelper,
+ /usr/libexec/libvirt_leaseshelper Cx -> libvirt_leaseshelper,
+
+ # lxc-net pid and lease files
+ @{run}/lxc/dnsmasq.pid rw,
+ /var/lib/misc/dnsmasq.*.leases rw,
+
+ # lxd-bridge pid and lease files
+ @{run}/lxd-bridge/dnsmasq.pid rw,
+ /var/lib/lxd-bridge/dnsmasq.*.leases rw,
+ /var/lib/lxd/networks/*/dnsmasq.* r,
+ /var/lib/lxd/networks/*/dnsmasq.leases rw,
+ /var/lib/lxd/networks/*/dnsmasq.pid rw,
+
+ # NetworkManager integration
+ /var/lib/NetworkManager/dnsmasq-*.leases rw,
+ @{run}/nm-dns-dnsmasq.conf r,
+ @{run}/nm-dnsmasq-*.pid rw,
+ @{run}/sendsigs.omit.d/*dnsmasq.pid w,
+ @{run}/NetworkManager/dnsmasq.conf r,
+ @{run}/NetworkManager/dnsmasq.pid w,
+ @{run}/NetworkManager/NetworkManager.pid w,
+
+ profile libvirt_leaseshelper {
+ include <abstractions/base>
+
+ /etc/libnl-3/classid r,
+
+ /usr/lib{,64}/libvirt/libvirt_leaseshelper m,
+ /usr/libexec/libvirt_leaseshelper mr,
+
+ owner @{PROC}/@{pid}/net/psched r,
+ owner @{PROC}/@{pid}/status r,
+
+ @{sys}/devices/system/cpu/ r,
+ @{sys}/devices/system/node/ r,
+ @{sys}/devices/system/node/*/meminfo r,
+
+ # libvirt lease and status files for dnsmasq
+ /var/lib/libvirt/dnsmasq/*.leases rw,
+ /var/lib/libvirt/dnsmasq/*.status* rw,
+
+ @{run}/leaseshelper.pid rwk,
+ }
+
+ # Site-specific additions and overrides. See local/README for details.
+ include if exists <local/usr.sbin.dnsmasq>
+}
\ No newline at end of file
diff --git a/srcpkgs/apparmor/template b/srcpkgs/apparmor/template
index dfbd3ef472fa..0d8c1ec7087e 100644
--- a/srcpkgs/apparmor/template
+++ b/srcpkgs/apparmor/template
@@ -1,7 +1,7 @@
# Template file for 'apparmor'
pkgname=apparmor
version=3.0.1
-revision=3
+revision=4
wrksrc="${pkgname}-v${version}"
build_wrksrc=libraries/libapparmor
build_style=gnu-configure
next reply other threads:[~2021-04-11 4:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-11 4:01 noarchwastaken [this message]
2021-04-11 4:14 ` noarchwastaken
2021-04-11 4:17 ` noarchwastaken
2021-04-11 8:45 ` FollieHiyuki
2021-04-11 9:50 ` paper42
2021-04-11 12:49 ` Duncaen
2021-04-11 17:33 ` [PR PATCH] [Updated] " noarchwastaken
2021-04-11 17:47 ` noarchwastaken
2021-04-11 17:50 ` Duncaen
2021-04-11 17:52 ` [PR PATCH] [Updated] " noarchwastaken
2021-04-16 0:41 ` [PR PATCH] [Merged]: " ericonr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-30142@inbox.vuxu.org \
--to=noarchwastaken@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).