Github messages for voidlinux
 help / color / mirror / Atom feed
From: newbluemoon <newbluemoon@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: [PR PATCH] perl-Crypt-CBC: update to 3.04
Date: Wed, 19 May 2021 16:26:58 +0200	[thread overview]
Message-ID: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-30990@inbox.vuxu.org> (raw)

[-- Attachment #1: Type: text/plain, Size: 2058 bytes --]

There is a new pull request by newbluemoon against master on the void-packages repository

https://github.com/newbluemoon/void-packages perl-Crypt-CBC
https://github.com/void-linux/void-packages/pull/30990

perl-Crypt-CBC: update to 3.04
There is a change which requires the perl-Math-Int128 module when using 'ctr' (Counter Mode) as block chaining mode, because it’s much faster than the previsously used Math::BigInt (default mode is still 'cbc').

However, Math::Int128 is not available on 32-bit architectures, so this update would break such setups, though probably not many are using it, if anyone at all. But still I’m not sure how to proceed on this.

Tested on x86_64.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30990.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-perl-Crypt-CBC-30990.patch --]
[-- Type: text/x-diff, Size: 3521 bytes --]

From c0d9709f4bced38404cb66d1e7b2e48b3ecb52e0 Mon Sep 17 00:00:00 2001
From: newbluemoon <blaumolch@mailbox.org>
Date: Wed, 19 May 2021 16:09:01 +0200
Subject: [PATCH 1/3] New package: perl-Math-Int64-0.54

---
 srcpkgs/perl-Math-Int64/template | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 srcpkgs/perl-Math-Int64/template

diff --git a/srcpkgs/perl-Math-Int64/template b/srcpkgs/perl-Math-Int64/template
new file mode 100644
index 000000000000..f5554054e6f5
--- /dev/null
+++ b/srcpkgs/perl-Math-Int64/template
@@ -0,0 +1,15 @@
+# Template file for 'perl-Math-Int64'
+pkgname=perl-Math-Int64
+version=0.54
+revision=1
+wrksrc="${pkgname#perl-}-${version}"
+build_style=perl-module
+hostmakedepends="perl"
+makedepends="perl"
+depends="perl"
+short_desc="Add support for 64 bit integers, signed and unsigned, to Perl"
+maintainer="newbluemoon <blaumolch@mailbox.org>"
+license="Artistic-1.0-Perl, GPL-1.0-or-later"
+homepage="https://metacpan.org/release/Math-Int64"
+distfiles="${CPAN_SITE}/Math/Math-Int64-${version}.tar.gz"
+checksum=dcfc51e698437ea6b9cefe0276215c56cdb6a7f85e3e24a2b6b4189f1960d351

From 74e9d2420c1c857500ca4c49511c9187c3649c14 Mon Sep 17 00:00:00 2001
From: newbluemoon <blaumolch@mailbox.org>
Date: Wed, 19 May 2021 16:09:28 +0200
Subject: [PATCH 2/3] New package: perl-Math-Int128-0.22

---
 srcpkgs/perl-Math-Int128/template | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 srcpkgs/perl-Math-Int128/template

diff --git a/srcpkgs/perl-Math-Int128/template b/srcpkgs/perl-Math-Int128/template
new file mode 100644
index 000000000000..047522700d9b
--- /dev/null
+++ b/srcpkgs/perl-Math-Int128/template
@@ -0,0 +1,18 @@
+# Template file for 'perl-Math-Int128'
+pkgname=perl-Math-Int128
+version=0.22
+revision=1
+# not supported on 32-bit architectures
+archs="aarch64* ppc64* x86_64*"
+wrksrc="${pkgname#perl-}-${version}"
+build_style=perl-module
+hostmakedepends="perl"
+makedepends="perl"
+depends="perl perl-Math-Int64"
+checkdepends="perl-Math-Int64"
+short_desc="Add support for 128 bit integers, signed and unsigned, to Perl"
+maintainer="newbluemoon <blaumolch@mailbox.org>"
+license="Artistic-1.0-Perl, GPL-1.0-or-later"
+homepage="https://metacpan.org/release/Math-Int64"
+distfiles="${CPAN_SITE}/Math/Math-Int128-${version}.tar.gz"
+checksum=a630ca401753866955f1173848ab5b4ac4ad5ca6ad9087f11cdf91dde85119bc

From 08643eeca42e835f672247089be13b2651f5f50c Mon Sep 17 00:00:00 2001
From: newbluemoon <blaumolch@mailbox.org>
Date: Wed, 19 May 2021 16:10:55 +0200
Subject: [PATCH 3/3] perl-Crypt-CBC: update to 3.04

---
 srcpkgs/perl-Crypt-CBC/template | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/srcpkgs/perl-Crypt-CBC/template b/srcpkgs/perl-Crypt-CBC/template
index 5ddc77f0674e..f15cfc6013cb 100644
--- a/srcpkgs/perl-Crypt-CBC/template
+++ b/srcpkgs/perl-Crypt-CBC/template
@@ -1,6 +1,6 @@
 # Template file for 'perl-Crypt-CBC'
 pkgname=perl-Crypt-CBC
-version=3.01
+version=3.04
 revision=1
 wrksrc="${pkgname#perl-}-${version}"
 build_style=perl-module
@@ -12,6 +12,6 @@ maintainer="newbluemoon <blaumolch@mailbox.org>"
 license="Artistic-1.0-Perl, GPL-1.0-or-later"
 homepage="https://metacpan.org/release/Crypt-CBC"
 distfiles="${CPAN_SITE}/Crypt/Crypt-CBC-${version}.tar.gz"
-checksum=de259c1c94fc1fd2731dfd276e8b05e31edfd2150848afdff09ac6ae9a03e624
+checksum=4026c57d0dbf6496c0d561a26f161b763d3b8edf351139c073492e21b5fbce07
 # check requires a lot of new cascading dependencies
 make_check=no

             reply	other threads:[~2021-05-19 14:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19 14:26 newbluemoon [this message]
2021-05-19 23:08 ` [PR REVIEW] " ericonr
2021-05-20  4:27 ` [PR PATCH] [Updated] " newbluemoon
2021-05-20  4:30 ` [PR REVIEW] " newbluemoon
2021-05-20  4:35 ` newbluemoon
2021-09-10  7:33 ` [PR PATCH] [Updated] " newbluemoon
2022-02-25 18:41 ` newbluemoon
2022-03-13 19:29 ` newbluemoon
2022-03-27 20:47 ` [PR PATCH] [Merged]: " leahneukirchen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-30990@inbox.vuxu.org \
    --to=newbluemoon@users.noreply.github.com \
    --cc=ml@inbox.vuxu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).