Github messages for voidlinux
 help / color / mirror / Atom feed
* [ISSUE] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards
@ 2022-01-12 21:38 n0x-io
  2022-01-12 21:54 ` Chocimier
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: n0x-io @ 2022-01-12 21:38 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 3180 bytes --]

New issue by n0x-io on void-packages repository

https://github.com/void-linux/void-packages/issues/35018

Description:
Hello!
I'm a little new to void linux and currently I'm running void musl. But since I'd like to run some stuff that requires glibc like for example discord I tried to set up a chroot with void glibc in which I can run all my software that depends on glibc.

A friend of mine is running a similar setup and showed my how to set it up but we are running into an issue we can't quite explain. I tried to find an already existing issue regarding my error and found issue #30496 but it drifted away from the original issue it seems.
I tested the whole issue inside a VM and on physical hardware to have some different platforms to test on. 
I'll try my best to write the process down. If there's any details I left out I'll try my best to add them or answer any questions.

Thanks so much in advance!!

### System
* xuname (on the base system)
  Void 5.15.14_1 x86_64-musl GenuineIntel uptodate rF
* xuname (inside the chroot):  
  Void 5.15.14_1 x86_64 GenuineIntel uptodate rF
* package:  
  the base bootstrap itself is causing issues.

### Expected behavior
The base for void-packages installs after running the command ./xbps-src binary-bootstrap and I will be able to install new packages inside my freshly created 

### Actual behavior
The bootstrap process says it installs successfully but prints an Error right after that.

```
....
46 downloaded, 66 installed, 0 updated, 66 configured, 0 removed.
=> xbps-src: installed base-chroot successfully!
ERROR: Failed to mount / private (Invalid argument)

```

### Steps to reproduce the behavior
I'm running on a fresh install of void-musl. I honestly have no real clue where my install breaks so I'll list my steps from the very beginnig

1. Install a fresh glibc base directory with
```
sudo XBPS_ARCH=x86_64 xbps-install -S -R https://alpha.de.repo.voidlinux.org/current -r ~/workspace/glibc-chroot base-voidstrap
```
2. chroot into the new base-install, set up a new user with the wheel and xbuilder group and close the chroot again
3. Mount needed directories and log in as the freshly created user
```
mount -t sysfs none ~/workspace/glibc-chroot/sys
mount -t proc none/proc
mount --rbind /dev  ~/workspace/glibc-chroot/dev
mount --rbind /tmp  ~/workspace/glibc-chroot/tmp
mount --rbind /run  ~/workspace/glibc-chroot/run
su -c "xhost +" myChrootUser
cp /etc/resolve.conf  ~/workspace/glibc-chroot/etc
chroot  ~/workspace/glibc-chroot su myChrootUser
```
4. Install some needed tools, fix libc-locales for my languages
```
sudo xbps-install git st-terminfo curl bsdtar nvim
```
enable "de_DE.UTF-8 UTF-8" and "de_DE ISO-8859-1" in /etc/defaults/libc-locales and recreate locales
```
sudo xbps-reconfigure -f glibc-locales
```
5. Download void-packages and run the binary-bootstrap
```
git clone https://github.com/void-linux/void-packages.git
cd void-packages/
echo XBPS_CHROOT_CMD=uchroot >> etc/conf
./xbps-src binary-bootstrap
```
After the last command runs through and says it's successfully the described error message shows up.


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards
  2022-01-12 21:38 [ISSUE] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards n0x-io
@ 2022-01-12 21:54 ` Chocimier
  2022-01-20 20:21 ` [ISSUE] [CLOSED] " Chocimier
  2022-01-20 20:21 ` Chocimier
  2 siblings, 0 replies; 4+ messages in thread
From: Chocimier @ 2022-01-12 21:54 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 260 bytes --]

New comment by Chocimier on void-packages repository

https://github.com/void-linux/void-packages/issues/35018#issuecomment-1011486745

Comment:
Don't use chroot for build. Follow instructions to build for glibc on musl host from readme (it's inverted there).

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards
  2022-01-12 21:38 [ISSUE] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards n0x-io
  2022-01-12 21:54 ` Chocimier
  2022-01-20 20:21 ` [ISSUE] [CLOSED] " Chocimier
@ 2022-01-20 20:21 ` Chocimier
  2 siblings, 0 replies; 4+ messages in thread
From: Chocimier @ 2022-01-20 20:21 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 437 bytes --]

New comment by Chocimier on void-packages repository

https://github.com/void-linux/void-packages/issues/35018#issuecomment-1017896384

Comment:
So full procedure on musl host is:

```
git clone https://github.com/void-linux/void-packages.git
cd void-packages/
./xbps-src -m masterdir-glibc binary-bootstrap x86_64
./xbps-src -m masterdir-glibc pkg ...
```

Copy resulting `*.x86_64.xbps` packages into chroot and install them.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [ISSUE] [CLOSED] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards
  2022-01-12 21:38 [ISSUE] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards n0x-io
  2022-01-12 21:54 ` Chocimier
@ 2022-01-20 20:21 ` Chocimier
  2022-01-20 20:21 ` Chocimier
  2 siblings, 0 replies; 4+ messages in thread
From: Chocimier @ 2022-01-20 20:21 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 3183 bytes --]

Closed issue by n0x-io on void-packages repository

https://github.com/void-linux/void-packages/issues/35018

Description:
Hello!
I'm a little new to void linux and currently I'm running void musl. But since I'd like to run some stuff that requires glibc like for example discord I tried to set up a chroot with void glibc in which I can run all my software that depends on glibc.

A friend of mine is running a similar setup and showed my how to set it up but we are running into an issue we can't quite explain. I tried to find an already existing issue regarding my error and found issue #30496 but it drifted away from the original issue it seems.
I tested the whole issue inside a VM and on physical hardware to have some different platforms to test on. 
I'll try my best to write the process down. If there's any details I left out I'll try my best to add them or answer any questions.

Thanks so much in advance!!

### System
* xuname (on the base system)
  Void 5.15.14_1 x86_64-musl GenuineIntel uptodate rF
* xuname (inside the chroot):  
  Void 5.15.14_1 x86_64 GenuineIntel uptodate rF
* package:  
  the base bootstrap itself is causing issues.

### Expected behavior
The base for void-packages installs after running the command ./xbps-src binary-bootstrap and I will be able to install new packages inside my freshly created 

### Actual behavior
The bootstrap process says it installs successfully but prints an Error right after that.

```
....
46 downloaded, 66 installed, 0 updated, 66 configured, 0 removed.
=> xbps-src: installed base-chroot successfully!
ERROR: Failed to mount / private (Invalid argument)

```

### Steps to reproduce the behavior
I'm running on a fresh install of void-musl. I honestly have no real clue where my install breaks so I'll list my steps from the very beginnig

1. Install a fresh glibc base directory with
```
sudo XBPS_ARCH=x86_64 xbps-install -S -R https://alpha.de.repo.voidlinux.org/current -r ~/workspace/glibc-chroot base-voidstrap
```
2. chroot into the new base-install, set up a new user with the wheel and xbuilder group and close the chroot again
3. Mount needed directories and log in as the freshly created user
```
mount -t sysfs none ~/workspace/glibc-chroot/sys
mount -t proc none/proc
mount --rbind /dev  ~/workspace/glibc-chroot/dev
mount --rbind /tmp  ~/workspace/glibc-chroot/tmp
mount --rbind /run  ~/workspace/glibc-chroot/run
su -c "xhost +" myChrootUser
cp /etc/resolve.conf  ~/workspace/glibc-chroot/etc
chroot  ~/workspace/glibc-chroot su myChrootUser
```
4. Install some needed tools, fix libc-locales for my languages
```
sudo xbps-install git st-terminfo curl bsdtar nvim
```
enable "de_DE.UTF-8 UTF-8" and "de_DE ISO-8859-1" in /etc/defaults/libc-locales and recreate locales
```
sudo xbps-reconfigure -f glibc-locales
```
5. Download void-packages and run the binary-bootstrap
```
git clone https://github.com/void-linux/void-packages.git
cd void-packages/
echo XBPS_CHROOT_CMD=uchroot >> etc/conf
./xbps-src binary-bootstrap
```
After the last command runs through and says it's successfully the described error message shows up.


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2022-01-20 20:21 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-12 21:38 [ISSUE] binary-bootstrap says it installed successfully but prints "ERROR: Failed to mount / private (Invalid argument)" right afterwards n0x-io
2022-01-12 21:54 ` Chocimier
2022-01-20 20:21 ` [ISSUE] [CLOSED] " Chocimier
2022-01-20 20:21 ` Chocimier

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).