Thanks for the great info!

On Tuesday, July 14, 2015 at 5:39:25 AM UTC-4, Ernesti Käpylä wrote:
>
> I had the exact same problem and it was caused by missing modules  and 
> drivers in dracut created initramfs that boots the kernel. Try booting to 
> livecd or older kernel and run "lsinitrd 
> /boot/initramfs-your-failing-kernel-version | less"  and it should list 
> included modules.
>
> Open /etc/dracut.conf and modify to include needed ones, in my case sata 
> driver was missing and crypt module
>
> add_drivers+="ahci"
> add_dracutmodules+="crypt caps"
>
> next run sudo dracut -f /boot/initramfs-your-failing-kernel-version 
> your-failing-kernel-version
>
> reboot and hopefully it works. If it still doesn't work you can try 
> mkinitcpio.
>
> maanantai 13. heinäkuuta 2015 17.41.50 UTC+3 oliver kirjoitti:
>>
>> Further to this, I was able to re-create the problem every time using the 
>> 6/15 MUSL ISO.  As soon as the kernel is upgraded, the box fails to boot 
>> (tried 4.0.x and 4.1.x)
>>
>> Installing from the 7/13 ISO (with kernel 4.1.2) worked so I think 
>> whatever the problem was is now resolved.
>>
>