Re: can't ping remote side IP range from WG instance

[Eric Light <eric@ericlight.com>]

[-- Attachment #1: Type: text/plain, Size: 4209 bytes --]

Hi Adrián,

Sounds like you're doing something similar to what I've been playing
with.  I chatted with Jason about it a bit, and he sorted me out with a
better solution - perhaps it'll work for you too:
Instead of spinning up a Masquerade rule in iptables, have you tried
just making sure that ProxyARP is enabled on the B side Ubuntu server?
Try removing the masquerade from iptables, and run this instead:
echo 1 > /proc/sys/net/ipv4/conf/all/proxy_arp

You may also need to enable IP forwarding:

echo 1 > /proc/sys/net/ipv4/ip_forward

If you want to make it permanent, add this to your /etc/sysctl.conf
(again on the B side Ubuntu):
net.ipv4.conf.all.proxy_arp = 1
net.ipv4.conf.all.forwarding = 1

You might be able to use net.ipv4.conf.*wg0 *instead, I've just used
.all as an example
Let me know if that helps  :)

E

--------------------------------------------
Q: Why is this email five sentences or less?
A: http://five.sentenc.es



On Mon, 26 Mar 2018, at 10:33, Adrián Mihálko wrote:
> Ah. The solution was trivial.
> 
> On B side, Ubuntu server:
> 
> post-up iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
> 
> On my server eth0 doesn't exist it has another name: ens160.
> 
> Now it's working.
> 
> 
>> On 25 Mar 2018, at 11:19, Adrián Mihálko
>> <adriankoooo@gmail.com> wrote:>> 
>> A side (192.168.2.0/24):
>> 
>> LEDE router 192.168.2.1 (static route to access remote side
>> 192.168.1.0/24 pointing to 192.168.2.100)>> 
>> Pi Zero with Wireguard (192.168.2.100, WG: 192.168.5.2)
>> 
>> Config:
>> 
>> auto wg0
>> iface wg0 inet static
>>   pre-up ip link add dev wg0 type wireguard
>>   post-up wg setconf wg0 /etc/wireguard/wireguard.conf
>>   post-up ip link set dev wg0 up
>>   post-up ip route add 192.168.1.0/24 via 192.168.5.1 dev wg0
>>   post-up iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
>>   address 192.168.5.2
>>   netmask 255.255.255.0
>> 
>> 
>> B side (192.168.1.0/24):
>> 
>> Unifi router 192.168.1.1 (static route to access remote side
>> 192.168.2.0/24 pointing to 192.168.1.54)>> 
>> Ubuntu server with Wireguard (192.168.1.54, WG: 192.168.5.1)
>> 
>> Config:
>> 
>> iface wg0 inet static
>>   pre-up /sbin/ip link add dev wg0 type wireguard
>>   post-up /usr/bin/wg setconf wg0 /etc/wireguard/wg0.conf
>>   post-up /sbin/ip route add 192.168.2.0/24 via 192.168.5.2 dev wg0
>>   post-up iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
>>   post-down /sbin/ip link del wg0
>>   address 192.168.5.1
>>   netmask 255.255.255.0
>> 
>> ---
>> 
>> Everything is working great, except that on the "Pi Zero with
>> Wireguard" I can't access/ping remote devices in the 192.168.1.0/24
>> range, only the remote server 192.168.1.54. From any other machine in
>> the same "A side" I am able to access devices in the 192.168.1.0/24
>> range, just from the Pi Zero itself not.>> 
>> What I am missing here?
>> 
>> 
>> pi@raspberrypizero:~ $ ping 192.168.1.54
>> PING 192.168.1.54 (192.168.1.54) 56(84) bytes of data.
>> 64 bytes from 192.168.1.54[1]: icmp_seq=1 ttl=64 time=48.6 ms
>> 64 bytes from 192.168.1.54[2]: icmp_seq=2 ttl=64 time=134 ms^C
>> --- 192.168.1.54 ping statistics ---
>> 2 packets transmitted, 2 received, 0% packet loss, time 1002ms
>> rtt min/avg/max/mdev = 48.671/91.554/134.437/42.883 ms
>> pi@raspberrypizero:~ $ ping 192.168.1.100
>> PING 192.168.1.100 (192.168.1.100) 56(84) bytes of data.
>> ^C
>> --- 192.168.1.100 ping statistics ---
>> 6 packets transmitted, 0 received, 100% packet loss, time 5188ms
>> 
>> pi@raspberrypizero:~ $ traceroute 192.168.1.100
>> traceroute to 192.168.1.100 (192.168.1.100), 30 hops max, 60 byte
>> packets>>  1  192.168.5.1 (192.168.5.1)  42.279 ms  43.834 ms  44.678 ms
>>  2  * * *
>>  3  * * *
>>  4  * * *
>> 
>> 
>> ---
>> 
>> B side is working great, I am able to ping everything, even from the
>> Ubuntu server.>> 
>> 
>> Regards,
>> Adrian
> _________________________________________________
> WireGuard mailing list
> WireGuard@lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard


Links:

  1. http://192.168.1.54/
  2. http://192.168.1.54/

[-- Attachment #2: Type: text/html, Size: 7062 bytes --]