[PATCH] [Zinc] Add PowerPC chacha20 implementation from openssl/cryptograms

* [PATCH] [Zinc] Add PowerPC chacha20 implementation from openssl/cryptograms
@ 2019-05-11 13:10 Shawn Landden
  2019-05-11 18:03 ` [PATCH 1/2] " Shawn Landden
  0 siblings, 1 reply; 6+ messages in thread
From: Shawn Landden @ 2019-05-11 13:10 UTC (permalink / raw)
  To: wireguard

There is a bug where may_use_simd()
returns false in kworker, and prevents most of this code from running.

Otherwise this is tested (with the VSX code enabled) on Power 9 (ppc64le).
It is quite a bit faster (look at the benchmarks in the assembly file)
but it is difficult to give numbers because the interface line
speed is the limiting factor.

Signed-off-by: Shawn Landden <shawn@git.icu>
---
 src/compat/simd/include/linux/simd.h         |   18 +-
 src/crypto/Kbuild.include                    |   26 +-
 src/crypto/zinc/chacha20/chacha20-ppc-glue.c |   67 +
 src/crypto/zinc/chacha20/chacha20-ppc.pl     | 1355 ++++++++++++++++++
 src/crypto/zinc/chacha20/chacha20.c          |    2 +
 src/crypto/zinc/chacha20/ppc-xlate.pl        |  353 +++++
 6 files changed, 1818 insertions(+), 3 deletions(-)
 create mode 100644 src/crypto/zinc/chacha20/chacha20-ppc-glue.c
 create mode 100644 src/crypto/zinc/chacha20/chacha20-ppc.pl
 create mode 100644 src/crypto/zinc/chacha20/ppc-xlate.pl

diff --git a/src/compat/simd/include/linux/simd.h b/src/compat/simd/include/linux/simd.h
index c75c724..23af478 100644
--- a/src/compat/simd/include/linux/simd.h
+++ b/src/compat/simd/include/linux/simd.h
@@ -11,10 +11,12 @@
 #if defined(CONFIG_X86_64)
 #include <linux/version.h>
 #include <asm/fpu/api.h>
 #elif defined(CONFIG_KERNEL_MODE_NEON)
 #include <asm/neon.h>
+#elif defined(CONFIG_ALTIVEC) || defined(CONFIG_VSX)
+#include <asm/switch_to.h>
 #endif
 
 typedef enum {
 	HAVE_NO_SIMD = 1 << 0,
 	HAVE_FULL_SIMD = 1 << 1,
@@ -28,17 +30,23 @@ static inline void simd_get(simd_context_t *ctx)
 	*ctx = !IS_ENABLED(CONFIG_PREEMPT_RT_BASE) && may_use_simd() ? HAVE_FULL_SIMD : HAVE_NO_SIMD;
 }
 
 static inline void simd_put(simd_context_t *ctx)
 {
+        if (*ctx & HAVE_SIMD_IN_USE) {
 #if defined(CONFIG_X86_64)
-	if (*ctx & HAVE_SIMD_IN_USE)
 		kernel_fpu_end();
 #elif defined(CONFIG_KERNEL_MODE_NEON)
-	if (*ctx & HAVE_SIMD_IN_USE)
 		kernel_neon_end();
+#elif defined(CONFIG_VSX)
+		disable_kernel_vsx();
+		preempt_enable();
+#elif defined(CONFIG_ALTIVEC)
+		disable_kernel_altivec();
+		preempt_enable();
 #endif
+	}
 	*ctx = HAVE_NO_SIMD;
 }
 
 static inline bool simd_relax(simd_context_t *ctx)
 {
@@ -60,10 +68,16 @@ static __must_check inline bool simd_use(simd_context_t *ctx)
 		return true;
 #if defined(CONFIG_X86_64)
 	kernel_fpu_begin();
 #elif defined(CONFIG_KERNEL_MODE_NEON)
 	kernel_neon_begin();
+#elif defined(CONFIG_VSX)
+	preempt_disable();
+	enable_kernel_vsx();
+#elif defined(CONFIG_ALTIVEC)
+	preempt_disable();
+	enable_kernel_altivec();
 #endif
 	*ctx |= HAVE_SIMD_IN_USE;
 	return true;
 }
 
diff --git a/src/crypto/Kbuild.include b/src/crypto/Kbuild.include
index 460684d..64894a5 100644
--- a/src/crypto/Kbuild.include
+++ b/src/crypto/Kbuild.include
@@ -11,17 +11,25 @@ ifeq ($(CONFIG_MIPS)$(CONFIG_CPU_MIPS32_R2),yy)
 CONFIG_ZINC_ARCH_MIPS := y
 endif
 ifeq ($(CONFIG_MIPS)$(CONFIG_64BIT),yy)
 CONFIG_ZINC_ARCH_MIPS64 := y
 endif
+ifeq ($(CONFIG_PPC32),y)
+CONFIG_ZINC_ARCH_PPC32 := y
+endif
+ifeq ($(CONFIG_PPC64),y)
+CONFIG_ZINC_ARCH_PPC64 := y
+endif
 
 zinc-y += chacha20/chacha20.o
 zinc-$(CONFIG_ZINC_ARCH_X86_64) += chacha20/chacha20-x86_64.o
 zinc-$(CONFIG_ZINC_ARCH_ARM) += chacha20/chacha20-arm.o chacha20/chacha20-unrolled-arm.o
 zinc-$(CONFIG_ZINC_ARCH_ARM64) += chacha20/chacha20-arm64.o
 zinc-$(CONFIG_ZINC_ARCH_MIPS) += chacha20/chacha20-mips.o
 AFLAGS_chacha20-mips.o += -O2 # This is required to fill the branch delay slots
+zinc-$(CONFIG_ZINC_ARCH_PPC32) += chacha20/chacha20-ppc.o
+zinc-$(CONFIG_ZINC_ARCH_PPC64) += chacha20/chacha20-ppc.o
 
 zinc-y += poly1305/poly1305.o
 zinc-$(CONFIG_ZINC_ARCH_X86_64) += poly1305/poly1305-x86_64.o
 zinc-$(CONFIG_ZINC_ARCH_ARM) += poly1305/poly1305-arm.o
 zinc-$(CONFIG_ZINC_ARCH_ARM64) += poly1305/poly1305-arm64.o
@@ -36,22 +44,38 @@ zinc-$(CONFIG_ZINC_ARCH_X86_64) += blake2s/blake2s-x86_64.o
 
 zinc-y += curve25519/curve25519.o
 zinc-$(CONFIG_ZINC_ARCH_ARM) += curve25519/curve25519-arm.o
 
 quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $< > $@
+      cmd_perlasm = $(PERL) $< $(perlflags-y) > $@
 $(obj)/%.S: $(src)/%.pl FORCE
 	$(call if_changed,perlasm)
 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
 targets := $(patsubst $(kbuild-dir)/%.pl,%.S,$(wildcard $(patsubst %.o,$(kbuild-dir)/crypto/zinc/%.pl,$(zinc-y) $(zinc-m) $(zinc-))))
 
+perlflags-$(CONFIG_ZINC_ARCH_PPC32) += linux32
+ifeq ($(CONFIG_ZINC_ARCH_PPC64),y)
+perlflags-$(CONFIG_CPU_BIG_ENDIAN) += linux64
+perlflags-$(CONFIG_CPU_LITTLE_ENDIAN) += linux64le
+endif
+
 # Old kernels don't set this, which causes trouble.
 .SECONDARY:
 
 wireguard-y += $(addprefix crypto/zinc/,$(zinc-y))
 ccflags-y += -I$(src)/crypto/include
 ccflags-$(CONFIG_ZINC_ARCH_X86_64) += -DCONFIG_ZINC_ARCH_X86_64
 ccflags-$(CONFIG_ZINC_ARCH_ARM) += -DCONFIG_ZINC_ARCH_ARM
 ccflags-$(CONFIG_ZINC_ARCH_ARM64) += -DCONFIG_ZINC_ARCH_ARM64
 ccflags-$(CONFIG_ZINC_ARCH_MIPS) += -DCONFIG_ZINC_ARCH_MIPS
 ccflags-$(CONFIG_ZINC_ARCH_MIPS64) += -DCONFIG_ZINC_ARCH_MIPS64
+ccflags-$(CONFIG_ZINC_ARCH_PPC32) += -DCONFIG_ZINC_ARCH_PPC32
+ccflags-$(CONFIG_ZINC_ARCH_PPC64) += -DCONFIG_ZINC_ARCH_PPC64
+ifdef ($(CONFIG_VSX),y)
+ccflags-$(CONFIG_ZINC_ARCH_PPC32) += -DCONFIG_VSX
+ccflags-$(CONFIG_ZINC_ARCH_PPC64) += -DCONFIG_VSX
+endif
+ifdef ($(CONFIG_ALTIVEC),y)
+ccflags-$(CONFIG_ZINC_ARCH_PPC32) += -DCONFIG_ALTIVEC
+ccflags-$(CONFIG_ZINC_ARCH_PPC64) += -DCONFIG_ALTIVEC
+endif
 ccflags-$(CONFIG_WIREGUARD_DEBUG) += -DCONFIG_ZINC_SELFTEST
diff --git a/src/crypto/zinc/chacha20/chacha20-ppc-glue.c b/src/crypto/zinc/chacha20/chacha20-ppc-glue.c
new file mode 100644
index 0000000..d13098b
--- /dev/null
+++ b/src/crypto/zinc/chacha20/chacha20-ppc-glue.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2019 Shawn Landden <shawn@git.icu>. All Rights Reserved.
+ */
+
+asmlinkage void ChaCha20_ctr32_int(u8 *out, const u8 *inp,
+                        size_t len, const u32 key[8],
+                        const u32 counter[4]);
+asmlinkage void ChaCha20_ctr32_vmx(u8 *out, const u8 *inp,
+                        size_t len, const u32 key[8],
+                        const u32 counter[4]);
+asmlinkage void ChaCha20_ctr32_vsx(u8 *out, const u8 *inp,
+                        size_t len, const u32 key[8],
+                        const u32 counter[4]);
+static bool *const chacha20_nobs[] __initconst = { };
+static void __init chacha20_fpu_init(void)
+{
+}
+
+static inline bool chacha20_arch(struct chacha20_ctx *ctx, u8 *dst,
+				 const u8 *src, size_t len,
+				 simd_context_t *simd_context)
+{
+	void (*ChaCha20SIMD)(u8 *out, const u8 *inp,
+                        size_t len, const u32 key[8],
+                        const u32 counter[4]);
+
+	/* SIMD disables preemption, so relax after processing each page. */
+	BUILD_BUG_ON(PAGE_SIZE < CHACHA20_BLOCK_SIZE ||
+		     PAGE_SIZE % CHACHA20_BLOCK_SIZE);
+
+	if (cpu_has_feature(CPU_FTR_VSX_COMP))
+		ChaCha20SIMD = &ChaCha20_ctr32_vsx;
+	else if (cpu_has_feature(CPU_FTR_ALTIVEC))
+                ChaCha20SIMD = &ChaCha20_ctr32_vmx;
+	else {
+		ChaCha20_ctr32_int(dst, src, len, ctx->key, ctx->counter);
+		return true;
+	}
+	for (;;) {
+		if (len >= CHACHA20_BLOCK_SIZE * 3 && simd_use(simd_context)) {
+			const size_t bytes = min_t(size_t, len, PAGE_SIZE);
+
+			ChaCha20SIMD(dst, src, bytes, ctx->key, ctx->counter);
+			ctx->counter[0] += (bytes + 63) / 64;
+			len -= bytes;
+			if (!len)
+				break;
+			dst += bytes;
+			src += bytes;
+			simd_relax(simd_context);
+		} else {
+			ChaCha20_ctr32_int(dst, src, len, ctx->key, ctx->counter);
+                        ctx->counter[0] += (len + 63) / 64;
+			return true;
+		}
+	}
+	return true;
+}
+
+static inline bool hchacha20_arch(u32 derived_key[CHACHA20_KEY_WORDS],
+				  const u8 nonce[HCHACHA20_NONCE_SIZE],
+				  const u8 key[HCHACHA20_KEY_SIZE],
+				  simd_context_t *simd_context)
+{
+	return false;
+}
diff --git a/src/crypto/zinc/chacha20/chacha20-ppc.pl b/src/crypto/zinc/chacha20/chacha20-ppc.pl
new file mode 100644
index 0000000..07468c8
--- /dev/null
+++ b/src/crypto/zinc/chacha20/chacha20-ppc.pl
@@ -0,0 +1,1355 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# October 2015
+#
+# ChaCha20 for PowerPC/AltiVec.
+#
+# June 2018
+#
+# Add VSX 2.07 code path. Original 3xAltiVec+1xIALU is well-suited for
+# processors that can't issue more than one vector instruction per
+# cycle. But POWER8 (and POWER9) can issue a pair, and vector-only 4x
+# interleave would perform better. Incidentally PowerISA 2.07 (first
+# implemented by POWER8) defined new usable instructions, hence 4xVSX
+# code path...
+#
+# Performance in cycles per byte out of large buffer.
+#
+#			IALU/gcc-4.x    3xAltiVec+1xIALU	4xVSX
+#
+# Freescale e300	13.6/+115%	-			-
+# PPC74x0/G4e		6.81/+310%	3.81			-
+# PPC970/G5		9.29/+160%	?			-
+# POWER7		8.62/+61%	3.35			-
+# POWER8		8.70/+51%	2.91			2.09
+# POWER9		8.80/+29%	4.44(*)			2.45(**)
+#
+# (*)	this is trade-off result, it's possible to improve it, but
+#	then it would negatively affect all others;
+# (**)	POWER9 seems to be "allergic" to mixing vector and integer
+#	instructions, which is why switch to vector-only code pays
+#	off that much;
+
+$flavour = shift;
+
+if ($flavour =~ /64/) {
+	$SIZE_T	=8;
+	$LRSAVE	=2*$SIZE_T;
+	$STU	="stdu";
+	$POP	="ld";
+	$PUSH	="std";
+	$UCMP	="cmpld";
+} elsif ($flavour =~ /32/) {
+	$SIZE_T	=4;
+	$LRSAVE	=$SIZE_T;
+	$STU	="stwu";
+	$POP	="lwz";
+	$PUSH	="stw";
+	$UCMP	="cmplw";
+} else { die "nonsense $flavour"; }
+
+$LITTLE_ENDIAN = ($flavour=~/le$/) ? 1 : 0;
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$LOCALS=6*$SIZE_T;
+$FRAME=$LOCALS+64+18*$SIZE_T;	# 64 is for local variables
+
+sub AUTOLOAD()		# thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+    $code .= "\t$opcode\t".join(',',@_)."\n";
+}
+
+my $sp = "r1";
+
+my ($out,$inp,$len,$key,$ctr) = map("r$_",(3..7));
+
+my @x=map("r$_",(16..31));
+my @d=map("r$_",(11,12,14,15));
+my @t=map("r$_",(7..10));
+
+sub ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+
+    (
+	"&add		(@x[$a0],@x[$a0],@x[$b0])",
+	 "&add		(@x[$a1],@x[$a1],@x[$b1])",
+	  "&add		(@x[$a2],@x[$a2],@x[$b2])",
+	   "&add	(@x[$a3],@x[$a3],@x[$b3])",
+	"&xor		(@x[$d0],@x[$d0],@x[$a0])",
+	 "&xor		(@x[$d1],@x[$d1],@x[$a1])",
+	  "&xor		(@x[$d2],@x[$d2],@x[$a2])",
+	   "&xor	(@x[$d3],@x[$d3],@x[$a3])",
+	"&rotlwi	(@x[$d0],@x[$d0],16)",
+	 "&rotlwi	(@x[$d1],@x[$d1],16)",
+	  "&rotlwi	(@x[$d2],@x[$d2],16)",
+	   "&rotlwi	(@x[$d3],@x[$d3],16)",
+
+	"&add		(@x[$c0],@x[$c0],@x[$d0])",
+	 "&add		(@x[$c1],@x[$c1],@x[$d1])",
+	  "&add		(@x[$c2],@x[$c2],@x[$d2])",
+	   "&add	(@x[$c3],@x[$c3],@x[$d3])",
+	"&xor		(@x[$b0],@x[$b0],@x[$c0])",
+	 "&xor		(@x[$b1],@x[$b1],@x[$c1])",
+	  "&xor		(@x[$b2],@x[$b2],@x[$c2])",
+	   "&xor	(@x[$b3],@x[$b3],@x[$c3])",
+	"&rotlwi	(@x[$b0],@x[$b0],12)",
+	 "&rotlwi	(@x[$b1],@x[$b1],12)",
+	  "&rotlwi	(@x[$b2],@x[$b2],12)",
+	   "&rotlwi	(@x[$b3],@x[$b3],12)",
+
+	"&add		(@x[$a0],@x[$a0],@x[$b0])",
+	 "&add		(@x[$a1],@x[$a1],@x[$b1])",
+	  "&add		(@x[$a2],@x[$a2],@x[$b2])",
+	   "&add	(@x[$a3],@x[$a3],@x[$b3])",
+	"&xor		(@x[$d0],@x[$d0],@x[$a0])",
+	 "&xor		(@x[$d1],@x[$d1],@x[$a1])",
+	  "&xor		(@x[$d2],@x[$d2],@x[$a2])",
+	   "&xor	(@x[$d3],@x[$d3],@x[$a3])",
+	"&rotlwi	(@x[$d0],@x[$d0],8)",
+	 "&rotlwi	(@x[$d1],@x[$d1],8)",
+	  "&rotlwi	(@x[$d2],@x[$d2],8)",
+	   "&rotlwi	(@x[$d3],@x[$d3],8)",
+
+	"&add		(@x[$c0],@x[$c0],@x[$d0])",
+	 "&add		(@x[$c1],@x[$c1],@x[$d1])",
+	  "&add		(@x[$c2],@x[$c2],@x[$d2])",
+	   "&add	(@x[$c3],@x[$c3],@x[$d3])",
+	"&xor		(@x[$b0],@x[$b0],@x[$c0])",
+	 "&xor		(@x[$b1],@x[$b1],@x[$c1])",
+	  "&xor		(@x[$b2],@x[$b2],@x[$c2])",
+	   "&xor	(@x[$b3],@x[$b3],@x[$c3])",
+	"&rotlwi	(@x[$b0],@x[$b0],7)",
+	 "&rotlwi	(@x[$b1],@x[$b1],7)",
+	  "&rotlwi	(@x[$b2],@x[$b2],7)",
+	   "&rotlwi	(@x[$b3],@x[$b3],7)"
+    );
+}
+
+$code.=<<___;
+.machine	"any"
+.text
+
+.globl	.ChaCha20_ctr32_int
+.align	5
+.ChaCha20_ctr32_int:
+__ChaCha20_ctr32_int:
+	${UCMP}i $len,0
+	beqlr-
+
+	$STU	$sp,-$FRAME($sp)
+	mflr	r0
+
+	$PUSH	r14,`$FRAME-$SIZE_T*18`($sp)
+	$PUSH	r15,`$FRAME-$SIZE_T*17`($sp)
+	$PUSH	r16,`$FRAME-$SIZE_T*16`($sp)
+	$PUSH	r17,`$FRAME-$SIZE_T*15`($sp)
+	$PUSH	r18,`$FRAME-$SIZE_T*14`($sp)
+	$PUSH	r19,`$FRAME-$SIZE_T*13`($sp)
+	$PUSH	r20,`$FRAME-$SIZE_T*12`($sp)
+	$PUSH	r21,`$FRAME-$SIZE_T*11`($sp)
+	$PUSH	r22,`$FRAME-$SIZE_T*10`($sp)
+	$PUSH	r23,`$FRAME-$SIZE_T*9`($sp)
+	$PUSH	r24,`$FRAME-$SIZE_T*8`($sp)
+	$PUSH	r25,`$FRAME-$SIZE_T*7`($sp)
+	$PUSH	r26,`$FRAME-$SIZE_T*6`($sp)
+	$PUSH	r27,`$FRAME-$SIZE_T*5`($sp)
+	$PUSH	r28,`$FRAME-$SIZE_T*4`($sp)
+	$PUSH	r29,`$FRAME-$SIZE_T*3`($sp)
+	$PUSH	r30,`$FRAME-$SIZE_T*2`($sp)
+	$PUSH	r31,`$FRAME-$SIZE_T*1`($sp)
+	$PUSH	r0,`$FRAME+$LRSAVE`($sp)
+
+	lwz	@d[0],0($ctr)			# load counter
+	lwz	@d[1],4($ctr)
+	lwz	@d[2],8($ctr)
+	lwz	@d[3],12($ctr)
+
+	bl	__ChaCha20_1x
+
+	$POP	r0,`$FRAME+$LRSAVE`($sp)
+	$POP	r14,`$FRAME-$SIZE_T*18`($sp)
+	$POP	r15,`$FRAME-$SIZE_T*17`($sp)
+	$POP	r16,`$FRAME-$SIZE_T*16`($sp)
+	$POP	r17,`$FRAME-$SIZE_T*15`($sp)
+	$POP	r18,`$FRAME-$SIZE_T*14`($sp)
+	$POP	r19,`$FRAME-$SIZE_T*13`($sp)
+	$POP	r20,`$FRAME-$SIZE_T*12`($sp)
+	$POP	r21,`$FRAME-$SIZE_T*11`($sp)
+	$POP	r22,`$FRAME-$SIZE_T*10`($sp)
+	$POP	r23,`$FRAME-$SIZE_T*9`($sp)
+	$POP	r24,`$FRAME-$SIZE_T*8`($sp)
+	$POP	r25,`$FRAME-$SIZE_T*7`($sp)
+	$POP	r26,`$FRAME-$SIZE_T*6`($sp)
+	$POP	r27,`$FRAME-$SIZE_T*5`($sp)
+	$POP	r28,`$FRAME-$SIZE_T*4`($sp)
+	$POP	r29,`$FRAME-$SIZE_T*3`($sp)
+	$POP	r30,`$FRAME-$SIZE_T*2`($sp)
+	$POP	r31,`$FRAME-$SIZE_T*1`($sp)
+	mtlr	r0
+	addi	$sp,$sp,$FRAME
+	blr
+	.long	0
+	.byte	0,12,4,1,0x80,18,5,0
+	.long	0
+.size	.ChaCha20_ctr32_int,.-.ChaCha20_ctr32_int
+
+.align	5
+__ChaCha20_1x:
+Loop_outer:
+	lis	@x[0],0x6170			# synthesize sigma
+	lis	@x[1],0x3320
+	lis	@x[2],0x7962
+	lis	@x[3],0x6b20
+	ori	@x[0],@x[0],0x7865
+	ori	@x[1],@x[1],0x646e
+	ori	@x[2],@x[2],0x2d32
+	ori	@x[3],@x[3],0x6574
+
+	li	r0,10				# inner loop counter
+	lwz	@x[4],0($key)			# load key
+	lwz	@x[5],4($key)
+	lwz	@x[6],8($key)
+	lwz	@x[7],12($key)
+	lwz	@x[8],16($key)
+	mr	@x[12],@d[0]			# copy counter
+	lwz	@x[9],20($key)
+	mr	@x[13],@d[1]
+	lwz	@x[10],24($key)
+	mr	@x[14],@d[2]
+	lwz	@x[11],28($key)
+	mr	@x[15],@d[3]
+
+	mr	@t[0],@x[4]
+	mr	@t[1],@x[5]
+	mr	@t[2],@x[6]
+	mr	@t[3],@x[7]
+
+	mtctr	r0
+Loop:
+___
+	foreach (&ROUND(0, 4, 8,12)) { eval; }
+	foreach (&ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+	bdnz	Loop
+
+	subic	$len,$len,64			# $len-=64
+	addi	@x[0],@x[0],0x7865		# accumulate key block
+	addi	@x[1],@x[1],0x646e
+	addi	@x[2],@x[2],0x2d32
+	addi	@x[3],@x[3],0x6574
+	addis	@x[0],@x[0],0x6170
+	addis	@x[1],@x[1],0x3320
+	addis	@x[2],@x[2],0x7962
+	addis	@x[3],@x[3],0x6b20
+
+	subfe.	r0,r0,r0			# borrow?-1:0
+	add	@x[4],@x[4],@t[0]
+	lwz	@t[0],16($key)
+	add	@x[5],@x[5],@t[1]
+	lwz	@t[1],20($key)
+	add	@x[6],@x[6],@t[2]
+	lwz	@t[2],24($key)
+	add	@x[7],@x[7],@t[3]
+	lwz	@t[3],28($key)
+	add	@x[8],@x[8],@t[0]
+	add	@x[9],@x[9],@t[1]
+	add	@x[10],@x[10],@t[2]
+	add	@x[11],@x[11],@t[3]
+
+	add	@x[12],@x[12],@d[0]
+	add	@x[13],@x[13],@d[1]
+	add	@x[14],@x[14],@d[2]
+	add	@x[15],@x[15],@d[3]
+	addi	@d[0],@d[0],1			# increment counter
+___
+if (!$LITTLE_ENDIAN) { for($i=0;$i<16;$i++) {	# flip byte order
+$code.=<<___;
+	mr	@t[$i&3],@x[$i]
+	rotlwi	@x[$i],@x[$i],8
+	rlwimi	@x[$i],@t[$i&3],24,0,7
+	rlwimi	@x[$i],@t[$i&3],24,16,23
+___
+} }
+$code.=<<___;
+	bne	Ltail				# $len-=64 borrowed
+
+	lwz	@t[0],0($inp)			# load input, aligned or not
+	lwz	@t[1],4($inp)
+	${UCMP}i $len,0				# done already?
+	lwz	@t[2],8($inp)
+	lwz	@t[3],12($inp)
+	xor	@x[0],@x[0],@t[0]		# xor with input
+	lwz	@t[0],16($inp)
+	xor	@x[1],@x[1],@t[1]
+	lwz	@t[1],20($inp)
+	xor	@x[2],@x[2],@t[2]
+	lwz	@t[2],24($inp)
+	xor	@x[3],@x[3],@t[3]
+	lwz	@t[3],28($inp)
+	xor	@x[4],@x[4],@t[0]
+	lwz	@t[0],32($inp)
+	xor	@x[5],@x[5],@t[1]
+	lwz	@t[1],36($inp)
+	xor	@x[6],@x[6],@t[2]
+	lwz	@t[2],40($inp)
+	xor	@x[7],@x[7],@t[3]
+	lwz	@t[3],44($inp)
+	xor	@x[8],@x[8],@t[0]
+	lwz	@t[0],48($inp)
+	xor	@x[9],@x[9],@t[1]
+	lwz	@t[1],52($inp)
+	xor	@x[10],@x[10],@t[2]
+	lwz	@t[2],56($inp)
+	xor	@x[11],@x[11],@t[3]
+	lwz	@t[3],60($inp)
+	xor	@x[12],@x[12],@t[0]
+	stw	@x[0],0($out)			# store output, aligned or not
+	xor	@x[13],@x[13],@t[1]
+	stw	@x[1],4($out)
+	xor	@x[14],@x[14],@t[2]
+	stw	@x[2],8($out)
+	xor	@x[15],@x[15],@t[3]
+	stw	@x[3],12($out)
+	stw	@x[4],16($out)
+	stw	@x[5],20($out)
+	stw	@x[6],24($out)
+	stw	@x[7],28($out)
+	stw	@x[8],32($out)
+	stw	@x[9],36($out)
+	stw	@x[10],40($out)
+	stw	@x[11],44($out)
+	stw	@x[12],48($out)
+	stw	@x[13],52($out)
+	stw	@x[14],56($out)
+	addi	$inp,$inp,64
+	stw	@x[15],60($out)
+	addi	$out,$out,64
+
+	bne	Loop_outer
+
+	blr
+
+.align	4
+Ltail:
+	addi	$len,$len,64			# restore tail length
+	subi	$inp,$inp,1			# prepare for *++ptr
+	subi	$out,$out,1
+	addi	@t[0],$sp,$LOCALS-1
+	mtctr	$len
+
+	stw	@x[0],`$LOCALS+0`($sp)		# save whole block to stack
+	stw	@x[1],`$LOCALS+4`($sp)
+	stw	@x[2],`$LOCALS+8`($sp)
+	stw	@x[3],`$LOCALS+12`($sp)
+	stw	@x[4],`$LOCALS+16`($sp)
+	stw	@x[5],`$LOCALS+20`($sp)
+	stw	@x[6],`$LOCALS+24`($sp)
+	stw	@x[7],`$LOCALS+28`($sp)
+	stw	@x[8],`$LOCALS+32`($sp)
+	stw	@x[9],`$LOCALS+36`($sp)
+	stw	@x[10],`$LOCALS+40`($sp)
+	stw	@x[11],`$LOCALS+44`($sp)
+	stw	@x[12],`$LOCALS+48`($sp)
+	stw	@x[13],`$LOCALS+52`($sp)
+	stw	@x[14],`$LOCALS+56`($sp)
+	stw	@x[15],`$LOCALS+60`($sp)
+
+Loop_tail:					# byte-by-byte loop
+	lbzu	@d[0],1($inp)
+	lbzu	@x[0],1(@t[0])
+	xor	@d[1],@d[0],@x[0]
+	stbu	@d[1],1($out)
+	bdnz	Loop_tail
+
+	stw	$sp,`$LOCALS+0`($sp)		# wipe block on stack
+	stw	$sp,`$LOCALS+4`($sp)
+	stw	$sp,`$LOCALS+8`($sp)
+	stw	$sp,`$LOCALS+12`($sp)
+	stw	$sp,`$LOCALS+16`($sp)
+	stw	$sp,`$LOCALS+20`($sp)
+	stw	$sp,`$LOCALS+24`($sp)
+	stw	$sp,`$LOCALS+28`($sp)
+	stw	$sp,`$LOCALS+32`($sp)
+	stw	$sp,`$LOCALS+36`($sp)
+	stw	$sp,`$LOCALS+40`($sp)
+	stw	$sp,`$LOCALS+44`($sp)
+	stw	$sp,`$LOCALS+48`($sp)
+	stw	$sp,`$LOCALS+52`($sp)
+	stw	$sp,`$LOCALS+56`($sp)
+	stw	$sp,`$LOCALS+60`($sp)
+
+	blr
+	.long	0
+	.byte	0,12,0x14,0,0,0,0,0
+___
+
+{{{
+my ($A0,$B0,$C0,$D0,$A1,$B1,$C1,$D1,$A2,$B2,$C2,$D2)
+				= map("v$_",(0..11));
+my @K				= map("v$_",(12..17));
+my ($FOUR,$sixteen,$twenty4)	= map("v$_",(18..19,23));
+my ($inpperm,$outperm,$outmask)	= map("v$_",(24..26));
+my @D				= map("v$_",(27..31));
+my ($twelve,$seven,$T0,$T1) = @D;
+
+my $FRAME=$LOCALS+64+10*16+18*$SIZE_T;	# 10*16 is for v23-v31 offload
+
+sub VMXROUND {
+my $odd = pop;
+my ($a,$b,$c,$d)=@_;
+
+	(
+	"&vadduwm	('$a','$a','$b')",
+	"&vxor		('$d','$d','$a')",
+	"&vperm		('$d','$d','$d','$sixteen')",
+
+	"&vadduwm	('$c','$c','$d')",
+	"&vxor		('$b','$b','$c')",
+	"&vrlw		('$b','$b','$twelve')",
+
+	"&vadduwm	('$a','$a','$b')",
+	"&vxor		('$d','$d','$a')",
+	"&vperm		('$d','$d','$d','$twenty4')",
+
+	"&vadduwm	('$c','$c','$d')",
+	"&vxor		('$b','$b','$c')",
+	"&vrlw		('$b','$b','$seven')",
+
+	"&vrldoi	('$c','$c',8)",
+	"&vrldoi	('$b','$b',$odd?4:12)",
+	"&vrldoi	('$d','$d',$odd?12:4)"
+	);
+}
+
+$code.=<<___;
+
+.globl	.ChaCha20_ctr32_vmx
+.align	5
+.ChaCha20_ctr32_vmx:
+	${UCMP}i $len,256
+	blt	__ChaCha20_ctr32_int
+
+	$STU	$sp,-$FRAME($sp)
+	mflr	r0
+	li	r10,`15+$LOCALS+64`
+	li	r11,`31+$LOCALS+64`
+	mfspr	r12,256
+	stvx	v23,r10,$sp
+	addi	r10,r10,32
+	stvx	v24,r11,$sp
+	addi	r11,r11,32
+	stvx	v25,r10,$sp
+	addi	r10,r10,32
+	stvx	v26,r11,$sp
+	addi	r11,r11,32
+	stvx	v27,r10,$sp
+	addi	r10,r10,32
+	stvx	v28,r11,$sp
+	addi	r11,r11,32
+	stvx	v29,r10,$sp
+	addi	r10,r10,32
+	stvx	v30,r11,$sp
+	stvx	v31,r10,$sp
+	stw	r12,`$FRAME-$SIZE_T*18-4`($sp)	# save vrsave
+	$PUSH	r14,`$FRAME-$SIZE_T*18`($sp)
+	$PUSH	r15,`$FRAME-$SIZE_T*17`($sp)
+	$PUSH	r16,`$FRAME-$SIZE_T*16`($sp)
+	$PUSH	r17,`$FRAME-$SIZE_T*15`($sp)
+	$PUSH	r18,`$FRAME-$SIZE_T*14`($sp)
+	$PUSH	r19,`$FRAME-$SIZE_T*13`($sp)
+	$PUSH	r20,`$FRAME-$SIZE_T*12`($sp)
+	$PUSH	r21,`$FRAME-$SIZE_T*11`($sp)
+	$PUSH	r22,`$FRAME-$SIZE_T*10`($sp)
+	$PUSH	r23,`$FRAME-$SIZE_T*9`($sp)
+	$PUSH	r24,`$FRAME-$SIZE_T*8`($sp)
+	$PUSH	r25,`$FRAME-$SIZE_T*7`($sp)
+	$PUSH	r26,`$FRAME-$SIZE_T*6`($sp)
+	$PUSH	r27,`$FRAME-$SIZE_T*5`($sp)
+	$PUSH	r28,`$FRAME-$SIZE_T*4`($sp)
+	$PUSH	r29,`$FRAME-$SIZE_T*3`($sp)
+	$PUSH	r30,`$FRAME-$SIZE_T*2`($sp)
+	$PUSH	r31,`$FRAME-$SIZE_T*1`($sp)
+	li	r12,-4096+511
+	$PUSH	r0, `$FRAME+$LRSAVE`($sp)
+	mtspr	256,r12				# preserve 29 AltiVec registers
+
+	bl	Lconsts				# returns pointer Lsigma in r12
+	li	@x[0],16
+	li	@x[1],32
+	li	@x[2],48
+	li	@x[3],64
+	li	@x[4],31			# 31 is not a typo
+	li	@x[5],15			# nor is 15
+
+	lvx	@K[1],0,$key			# load key
+	?lvsr	$T0,0,$key			# prepare unaligned load
+	lvx	@K[2],@x[0],$key
+	lvx	@D[0],@x[4],$key
+
+	lvx	@K[3],0,$ctr			# load counter
+	?lvsr	$T1,0,$ctr			# prepare unaligned load
+	lvx	@D[1],@x[5],$ctr
+
+	lvx	@K[0],0,r12			# load constants
+	lvx	@K[5],@x[0],r12			# one
+	lvx	$FOUR,@x[1],r12
+	lvx	$sixteen,@x[2],r12
+	lvx	$twenty4,@x[3],r12
+
+	?vperm	@K[1],@K[2],@K[1],$T0		# align key
+	?vperm	@K[2],@D[0],@K[2],$T0
+	?vperm	@K[3],@D[1],@K[3],$T1		# align counter
+
+	lwz	@d[0],0($ctr)			# load counter to GPR
+	lwz	@d[1],4($ctr)
+	vadduwm	@K[3],@K[3],@K[5]		# adjust AltiVec counter
+	lwz	@d[2],8($ctr)
+	vadduwm	@K[4],@K[3],@K[5]
+	lwz	@d[3],12($ctr)
+	vadduwm	@K[5],@K[4],@K[5]
+
+	vxor	$T0,$T0,$T0			# 0x00..00
+	vspltisw $outmask,-1			# 0xff..ff
+	?lvsr	$inpperm,0,$inp			# prepare for unaligned load
+	?lvsl	$outperm,0,$out			# prepare for unaligned store
+	?vperm	$outmask,$outmask,$T0,$outperm
+
+	be?lvsl	$T0,0,@x[0]			# 0x00..0f
+	be?vspltisb $T1,3			# 0x03..03
+	be?vxor	$T0,$T0,$T1			# swap bytes within words
+	be?vxor	$outperm,$outperm,$T1
+	be?vperm $inpperm,$inpperm,$inpperm,$T0
+
+	li	r0,10				# inner loop counter
+	b	Loop_outer_vmx
+
+.align	4
+Loop_outer_vmx:
+	lis	@x[0],0x6170			# synthesize sigma
+	lis	@x[1],0x3320
+	 vmr	$A0,@K[0]
+	lis	@x[2],0x7962
+	lis	@x[3],0x6b20
+	 vmr	$A1,@K[0]
+	ori	@x[0],@x[0],0x7865
+	ori	@x[1],@x[1],0x646e
+	 vmr	$A2,@K[0]
+	ori	@x[2],@x[2],0x2d32
+	ori	@x[3],@x[3],0x6574
+	 vmr	$B0,@K[1]
+
+	lwz	@x[4],0($key)			# load key to GPR
+	 vmr	$B1,@K[1]
+	lwz	@x[5],4($key)
+	 vmr	$B2,@K[1]
+	lwz	@x[6],8($key)
+	 vmr	$C0,@K[2]
+	lwz	@x[7],12($key)
+	 vmr	$C1,@K[2]
+	lwz	@x[8],16($key)
+	 vmr	$C2,@K[2]
+	mr	@x[12],@d[0]			# copy GPR counter
+	lwz	@x[9],20($key)
+	 vmr	$D0,@K[3]
+	mr	@x[13],@d[1]
+	lwz	@x[10],24($key)
+	 vmr	$D1,@K[4]
+	mr	@x[14],@d[2]
+	lwz	@x[11],28($key)
+	 vmr	$D2,@K[5]
+	mr	@x[15],@d[3]
+
+	mr	@t[0],@x[4]
+	mr	@t[1],@x[5]
+	mr	@t[2],@x[6]
+	mr	@t[3],@x[7]
+
+	vspltisw $twelve,12			# synthesize constants
+	vspltisw $seven,7
+
+	mtctr	r0
+	nop
+Loop_vmx:
+___
+	my @thread0=&VMXROUND($A0,$B0,$C0,$D0,0);
+	my @thread1=&VMXROUND($A1,$B1,$C1,$D1,0);
+	my @thread2=&VMXROUND($A2,$B2,$C2,$D2,0);
+	my @thread3=&ROUND(0,4,8,12);
+
+	foreach (@thread0) {
+		eval;
+		eval(shift(@thread1));
+		eval(shift(@thread2));
+
+		eval(shift(@thread3));
+		eval(shift(@thread3));
+		eval(shift(@thread3));
+	}
+	foreach (@thread3) { eval; }
+
+	@thread0=&VMXROUND($A0,$B0,$C0,$D0,1);
+	@thread1=&VMXROUND($A1,$B1,$C1,$D1,1);
+	@thread2=&VMXROUND($A2,$B2,$C2,$D2,1);
+	@thread3=&ROUND(0,5,10,15);
+
+	foreach (@thread0) {
+		eval;
+		eval(shift(@thread1));
+		eval(shift(@thread2));
+
+		eval(shift(@thread3));
+		eval(shift(@thread3));
+		eval(shift(@thread3));
+	}
+	foreach (@thread3) { eval; }
+$code.=<<___;
+	bdnz	Loop_vmx
+
+	subi	$len,$len,256			# $len-=256
+	addi	@x[0],@x[0],0x7865		# accumulate key block
+	addi	@x[1],@x[1],0x646e
+	addi	@x[2],@x[2],0x2d32
+	addi	@x[3],@x[3],0x6574
+	addis	@x[0],@x[0],0x6170
+	addis	@x[1],@x[1],0x3320
+	addis	@x[2],@x[2],0x7962
+	addis	@x[3],@x[3],0x6b20
+	add	@x[4],@x[4],@t[0]
+	lwz	@t[0],16($key)
+	add	@x[5],@x[5],@t[1]
+	lwz	@t[1],20($key)
+	add	@x[6],@x[6],@t[2]
+	lwz	@t[2],24($key)
+	add	@x[7],@x[7],@t[3]
+	lwz	@t[3],28($key)
+	add	@x[8],@x[8],@t[0]
+	add	@x[9],@x[9],@t[1]
+	add	@x[10],@x[10],@t[2]
+	add	@x[11],@x[11],@t[3]
+	add	@x[12],@x[12],@d[0]
+	add	@x[13],@x[13],@d[1]
+	add	@x[14],@x[14],@d[2]
+	add	@x[15],@x[15],@d[3]
+
+	vadduwm	$A0,$A0,@K[0]			# accumulate key block
+	vadduwm	$A1,$A1,@K[0]
+	vadduwm	$A2,$A2,@K[0]
+	vadduwm	$B0,$B0,@K[1]
+	vadduwm	$B1,$B1,@K[1]
+	vadduwm	$B2,$B2,@K[1]
+	vadduwm	$C0,$C0,@K[2]
+	vadduwm	$C1,$C1,@K[2]
+	vadduwm	$C2,$C2,@K[2]
+	vadduwm	$D0,$D0,@K[3]
+	vadduwm	$D1,$D1,@K[4]
+	vadduwm	$D2,$D2,@K[5]
+
+	addi	@d[0],@d[0],4			# increment counter
+	vadduwm	@K[3],@K[3],$FOUR
+	vadduwm	@K[4],@K[4],$FOUR
+	vadduwm	@K[5],@K[5],$FOUR
+
+___
+if (!$LITTLE_ENDIAN) { for($i=0;$i<16;$i++) {	# flip byte order
+$code.=<<___;
+	mr	@t[$i&3],@x[$i]
+	rotlwi	@x[$i],@x[$i],8
+	rlwimi	@x[$i],@t[$i&3],24,0,7
+	rlwimi	@x[$i],@t[$i&3],24,16,23
+___
+} }
+$code.=<<___;
+	lwz	@t[0],0($inp)			# load input, aligned or not
+	lwz	@t[1],4($inp)
+	lwz	@t[2],8($inp)
+	lwz	@t[3],12($inp)
+	xor	@x[0],@x[0],@t[0]		# xor with input
+	lwz	@t[0],16($inp)
+	xor	@x[1],@x[1],@t[1]
+	lwz	@t[1],20($inp)
+	xor	@x[2],@x[2],@t[2]
+	lwz	@t[2],24($inp)
+	xor	@x[3],@x[3],@t[3]
+	lwz	@t[3],28($inp)
+	xor	@x[4],@x[4],@t[0]
+	lwz	@t[0],32($inp)
+	xor	@x[5],@x[5],@t[1]
+	lwz	@t[1],36($inp)
+	xor	@x[6],@x[6],@t[2]
+	lwz	@t[2],40($inp)
+	xor	@x[7],@x[7],@t[3]
+	lwz	@t[3],44($inp)
+	xor	@x[8],@x[8],@t[0]
+	lwz	@t[0],48($inp)
+	xor	@x[9],@x[9],@t[1]
+	lwz	@t[1],52($inp)
+	xor	@x[10],@x[10],@t[2]
+	lwz	@t[2],56($inp)
+	xor	@x[11],@x[11],@t[3]
+	lwz	@t[3],60($inp)
+	xor	@x[12],@x[12],@t[0]
+	stw	@x[0],0($out)			# store output, aligned or not
+	xor	@x[13],@x[13],@t[1]
+	stw	@x[1],4($out)
+	xor	@x[14],@x[14],@t[2]
+	stw	@x[2],8($out)
+	xor	@x[15],@x[15],@t[3]
+	stw	@x[3],12($out)
+	addi	$inp,$inp,64
+	stw	@x[4],16($out)
+	li	@t[0],16
+	stw	@x[5],20($out)
+	li	@t[1],32
+	stw	@x[6],24($out)
+	li	@t[2],48
+	stw	@x[7],28($out)
+	li	@t[3],64
+	stw	@x[8],32($out)
+	stw	@x[9],36($out)
+	stw	@x[10],40($out)
+	stw	@x[11],44($out)
+	stw	@x[12],48($out)
+	stw	@x[13],52($out)
+	stw	@x[14],56($out)
+	stw	@x[15],60($out)
+	addi	$out,$out,64
+
+	lvx	@D[0],0,$inp			# load input
+	lvx	@D[1],@t[0],$inp
+	lvx	@D[2],@t[1],$inp
+	lvx	@D[3],@t[2],$inp
+	lvx	@D[4],@t[3],$inp
+	addi	$inp,$inp,64
+
+	?vperm	@D[0],@D[1],@D[0],$inpperm	# align input
+	?vperm	@D[1],@D[2],@D[1],$inpperm
+	?vperm	@D[2],@D[3],@D[2],$inpperm
+	?vperm	@D[3],@D[4],@D[3],$inpperm
+	vxor	$A0,$A0,@D[0]			# xor with input
+	vxor	$B0,$B0,@D[1]
+	lvx	@D[1],@t[0],$inp		# keep loading input
+	vxor	$C0,$C0,@D[2]
+	lvx	@D[2],@t[1],$inp
+	vxor	$D0,$D0,@D[3]
+	lvx	@D[3],@t[2],$inp
+	lvx	@D[0],@t[3],$inp
+	addi	$inp,$inp,64
+	li	@t[3],63			# 63 is not a typo
+	vperm	$A0,$A0,$A0,$outperm		# pre-misalign output
+	vperm	$B0,$B0,$B0,$outperm
+	vperm	$C0,$C0,$C0,$outperm
+	vperm	$D0,$D0,$D0,$outperm
+
+	?vperm	@D[4],@D[1],@D[4],$inpperm	# align input
+	?vperm	@D[1],@D[2],@D[1],$inpperm
+	?vperm	@D[2],@D[3],@D[2],$inpperm
+	?vperm	@D[3],@D[0],@D[3],$inpperm
+	vxor	$A1,$A1,@D[4]
+	vxor	$B1,$B1,@D[1]
+	lvx	@D[1],@t[0],$inp		# keep loading input
+	vxor	$C1,$C1,@D[2]
+	lvx	@D[2],@t[1],$inp
+	vxor	$D1,$D1,@D[3]
+	lvx	@D[3],@t[2],$inp
+	lvx	@D[4],@t[3],$inp		# redundant in aligned case
+	addi	$inp,$inp,64
+	vperm	$A1,$A1,$A1,$outperm		# pre-misalign output
+	vperm	$B1,$B1,$B1,$outperm
+	vperm	$C1,$C1,$C1,$outperm
+	vperm	$D1,$D1,$D1,$outperm
+
+	?vperm	@D[0],@D[1],@D[0],$inpperm	# align input
+	?vperm	@D[1],@D[2],@D[1],$inpperm
+	?vperm	@D[2],@D[3],@D[2],$inpperm
+	?vperm	@D[3],@D[4],@D[3],$inpperm
+	vxor	$A2,$A2,@D[0]
+	vxor	$B2,$B2,@D[1]
+	vxor	$C2,$C2,@D[2]
+	vxor	$D2,$D2,@D[3]
+	vperm	$A2,$A2,$A2,$outperm		# pre-misalign output
+	vperm	$B2,$B2,$B2,$outperm
+	vperm	$C2,$C2,$C2,$outperm
+	vperm	$D2,$D2,$D2,$outperm
+
+	andi.	@x[1],$out,15			# is $out aligned?
+	mr	@x[0],$out
+
+	vsel	@D[0],$A0,$B0,$outmask		# collect pre-misaligned output
+	vsel	@D[1],$B0,$C0,$outmask
+	vsel	@D[2],$C0,$D0,$outmask
+	vsel	@D[3],$D0,$A1,$outmask
+	vsel	$B0,$A1,$B1,$outmask
+	vsel	$C0,$B1,$C1,$outmask
+	vsel	$D0,$C1,$D1,$outmask
+	vsel	$A1,$D1,$A2,$outmask
+	vsel	$B1,$A2,$B2,$outmask
+	vsel	$C1,$B2,$C2,$outmask
+	vsel	$D1,$C2,$D2,$outmask
+
+	#stvx	$A0,0,$out			# take it easy on the edges
+	stvx	@D[0],@t[0],$out		# store output
+	stvx	@D[1],@t[1],$out
+	stvx	@D[2],@t[2],$out
+	addi	$out,$out,64
+	stvx	@D[3],0,$out
+	stvx	$B0,@t[0],$out
+	stvx	$C0,@t[1],$out
+	stvx	$D0,@t[2],$out
+	addi	$out,$out,64
+	stvx	$A1,0,$out
+	stvx	$B1,@t[0],$out
+	stvx	$C1,@t[1],$out
+	stvx	$D1,@t[2],$out
+	addi	$out,$out,64
+
+	beq	Laligned_vmx
+
+	sub	@x[2],$out,@x[1]		# in misaligned case edges
+	li	@x[3],0				# are written byte-by-byte
+Lunaligned_tail_vmx:
+	stvebx	$D2,@x[3],@x[2]
+	addi	@x[3],@x[3],1
+	cmpw	@x[3],@x[1]
+	bne	Lunaligned_tail_vmx
+
+	sub	@x[2],@x[0],@x[1]
+Lunaligned_head_vmx:
+	stvebx	$A0,@x[1],@x[2]
+	cmpwi	@x[1],15
+	addi	@x[1],@x[1],1
+	bne	Lunaligned_head_vmx
+
+	${UCMP}i $len,255			# done with 256-byte blocks yet?
+	bgt	Loop_outer_vmx
+
+	b	Ldone_vmx
+
+.align	4
+Laligned_vmx:
+	stvx	$A0,0,@x[0]			# head hexaword was not stored
+
+	${UCMP}i $len,255			# done with 256-byte blocks yet?
+	bgt	Loop_outer_vmx
+	nop
+
+Ldone_vmx:
+	${UCMP}i $len,0				# done yet?
+	bnel	__ChaCha20_1x
+
+	lwz	r12,`$FRAME-$SIZE_T*18-4`($sp)	# pull vrsave
+	li	r10,`15+$LOCALS+64`
+	li	r11,`31+$LOCALS+64`
+	mtspr	256,r12				# restore vrsave
+	lvx	v23,r10,$sp
+	addi	r10,r10,32
+	lvx	v24,r11,$sp
+	addi	r11,r11,32
+	lvx	v25,r10,$sp
+	addi	r10,r10,32
+	lvx	v26,r11,$sp
+	addi	r11,r11,32
+	lvx	v27,r10,$sp
+	addi	r10,r10,32
+	lvx	v28,r11,$sp
+	addi	r11,r11,32
+	lvx	v29,r10,$sp
+	addi	r10,r10,32
+	lvx	v30,r11,$sp
+	lvx	v31,r10,$sp
+	$POP	r0, `$FRAME+$LRSAVE`($sp)
+	$POP	r14,`$FRAME-$SIZE_T*18`($sp)
+	$POP	r15,`$FRAME-$SIZE_T*17`($sp)
+	$POP	r16,`$FRAME-$SIZE_T*16`($sp)
+	$POP	r17,`$FRAME-$SIZE_T*15`($sp)
+	$POP	r18,`$FRAME-$SIZE_T*14`($sp)
+	$POP	r19,`$FRAME-$SIZE_T*13`($sp)
+	$POP	r20,`$FRAME-$SIZE_T*12`($sp)
+	$POP	r21,`$FRAME-$SIZE_T*11`($sp)
+	$POP	r22,`$FRAME-$SIZE_T*10`($sp)
+	$POP	r23,`$FRAME-$SIZE_T*9`($sp)
+	$POP	r24,`$FRAME-$SIZE_T*8`($sp)
+	$POP	r25,`$FRAME-$SIZE_T*7`($sp)
+	$POP	r26,`$FRAME-$SIZE_T*6`($sp)
+	$POP	r27,`$FRAME-$SIZE_T*5`($sp)
+	$POP	r28,`$FRAME-$SIZE_T*4`($sp)
+	$POP	r29,`$FRAME-$SIZE_T*3`($sp)
+	$POP	r30,`$FRAME-$SIZE_T*2`($sp)
+	$POP	r31,`$FRAME-$SIZE_T*1`($sp)
+	mtlr	r0
+	addi	$sp,$sp,$FRAME
+	blr
+	.long	0
+	.byte	0,12,0x04,1,0x80,18,5,0
+	.long	0
+.size	.ChaCha20_ctr32_vmx,.-.ChaCha20_ctr32_vmx
+___
+}}}
+{{{
+my ($xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3,
+    $xc0,$xc1,$xc2,$xc3, $xd0,$xd1,$xd2,$xd3) = map("v$_",(0..15));
+my @K = map("v$_",(16..19));
+my $CTR = "v26";
+my ($xt0,$xt1,$xt2,$xt3) = map("v$_",(27..30));
+my ($sixteen,$twelve,$eight,$seven) = ($xt0,$xt1,$xt2,$xt3);
+my $beperm = "v31";
+
+my ($x00,$x10,$x20,$x30) = (0, map("r$_",(8..10)));
+
+my $FRAME=$LOCALS+64+7*16;	# 7*16 is for v26-v31 offload
+
+sub VSX_lane_ROUND {
+my ($a0,$b0,$c0,$d0)=@_;
+my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
+my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
+my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
+my @x=map("\"v$_\"",(0..15));
+
+	(
+	"&vadduwm	(@x[$a0],@x[$a0],@x[$b0])",	# Q1
+	 "&vadduwm	(@x[$a1],@x[$a1],@x[$b1])",	# Q2
+	  "&vadduwm	(@x[$a2],@x[$a2],@x[$b2])",	# Q3
+	   "&vadduwm	(@x[$a3],@x[$a3],@x[$b3])",	# Q4
+	"&vxor		(@x[$d0],@x[$d0],@x[$a0])",
+	 "&vxor		(@x[$d1],@x[$d1],@x[$a1])",
+	  "&vxor	(@x[$d2],@x[$d2],@x[$a2])",
+	   "&vxor	(@x[$d3],@x[$d3],@x[$a3])",
+	"&vrlw		(@x[$d0],@x[$d0],'$sixteen')",
+	 "&vrlw		(@x[$d1],@x[$d1],'$sixteen')",
+	  "&vrlw	(@x[$d2],@x[$d2],'$sixteen')",
+	   "&vrlw	(@x[$d3],@x[$d3],'$sixteen')",
+
+	"&vadduwm	(@x[$c0],@x[$c0],@x[$d0])",
+	 "&vadduwm	(@x[$c1],@x[$c1],@x[$d1])",
+	  "&vadduwm	(@x[$c2],@x[$c2],@x[$d2])",
+	   "&vadduwm	(@x[$c3],@x[$c3],@x[$d3])",
+	"&vxor		(@x[$b0],@x[$b0],@x[$c0])",
+	 "&vxor		(@x[$b1],@x[$b1],@x[$c1])",
+	  "&vxor	(@x[$b2],@x[$b2],@x[$c2])",
+	   "&vxor	(@x[$b3],@x[$b3],@x[$c3])",
+	"&vrlw		(@x[$b0],@x[$b0],'$twelve')",
+	 "&vrlw		(@x[$b1],@x[$b1],'$twelve')",
+	  "&vrlw	(@x[$b2],@x[$b2],'$twelve')",
+	   "&vrlw	(@x[$b3],@x[$b3],'$twelve')",
+
+	"&vadduwm	(@x[$a0],@x[$a0],@x[$b0])",
+	 "&vadduwm	(@x[$a1],@x[$a1],@x[$b1])",
+	  "&vadduwm	(@x[$a2],@x[$a2],@x[$b2])",
+	   "&vadduwm	(@x[$a3],@x[$a3],@x[$b3])",
+	"&vxor		(@x[$d0],@x[$d0],@x[$a0])",
+	 "&vxor		(@x[$d1],@x[$d1],@x[$a1])",
+	  "&vxor	(@x[$d2],@x[$d2],@x[$a2])",
+	   "&vxor	(@x[$d3],@x[$d3],@x[$a3])",
+	"&vrlw		(@x[$d0],@x[$d0],'$eight')",
+	 "&vrlw		(@x[$d1],@x[$d1],'$eight')",
+	  "&vrlw	(@x[$d2],@x[$d2],'$eight')",
+	   "&vrlw	(@x[$d3],@x[$d3],'$eight')",
+
+	"&vadduwm	(@x[$c0],@x[$c0],@x[$d0])",
+	 "&vadduwm	(@x[$c1],@x[$c1],@x[$d1])",
+	  "&vadduwm	(@x[$c2],@x[$c2],@x[$d2])",
+	   "&vadduwm	(@x[$c3],@x[$c3],@x[$d3])",
+	"&vxor		(@x[$b0],@x[$b0],@x[$c0])",
+	 "&vxor		(@x[$b1],@x[$b1],@x[$c1])",
+	  "&vxor	(@x[$b2],@x[$b2],@x[$c2])",
+	   "&vxor	(@x[$b3],@x[$b3],@x[$c3])",
+	"&vrlw		(@x[$b0],@x[$b0],'$seven')",
+	 "&vrlw		(@x[$b1],@x[$b1],'$seven')",
+	  "&vrlw	(@x[$b2],@x[$b2],'$seven')",
+	   "&vrlw	(@x[$b3],@x[$b3],'$seven')"
+	);
+}
+
+$code.=<<___;
+
+.globl	.ChaCha20_ctr32_vsx
+.align	5
+.ChaCha20_ctr32_vsx:
+	$STU	$sp,-$FRAME($sp)
+	mflr	r0
+	li	r10,`15+$LOCALS+64`
+	li	r11,`31+$LOCALS+64`
+	mfspr	r12,256
+	stvx	v26,r10,$sp
+	addi	r10,r10,32
+	stvx	v27,r11,$sp
+	addi	r11,r11,32
+	stvx	v28,r10,$sp
+	addi	r10,r10,32
+	stvx	v29,r11,$sp
+	addi	r11,r11,32
+	stvx	v30,r10,$sp
+	stvx	v31,r11,$sp
+	stw	r12,`$FRAME-4`($sp)		# save vrsave
+	li	r12,-4096+63
+	$PUSH	r0, `$FRAME+$LRSAVE`($sp)
+	mtspr	256,r12				# preserve 29 AltiVec registers
+
+	bl	Lconsts				# returns pointer Lsigma in r12
+	lvx_4w	@K[0],0,r12			# load sigma
+	addi	r12,r12,0x50
+	li	$x10,16
+	li	$x20,32
+	li	$x30,48
+	li	r11,64
+
+	lvx_4w	@K[1],0,$key			# load key
+	lvx_4w	@K[2],$x10,$key
+	lvx_4w	@K[3],0,$ctr			# load counter
+
+	vxor	$xt0,$xt0,$xt0
+	lvx_4w	$xt1,r11,r12
+	vspltw	$CTR,@K[3],0
+	vsldoi	@K[3],@K[3],$xt0,4
+	vsldoi	@K[3],$xt0,@K[3],12		# clear @K[3].word[0]
+	vadduwm	$CTR,$CTR,$xt1
+
+	be?lvsl	$beperm,0,$x10			# 0x00..0f
+	be?vspltisb $xt0,3			# 0x03..03
+	be?vxor	$beperm,$beperm,$xt0		# swap bytes within words
+
+	li	r0,10				# inner loop counter
+	mtctr	r0
+	b	Loop_outer_vsx
+
+.align	5
+Loop_outer_vsx:
+	lvx	$xa0,$x00,r12			# load [smashed] sigma
+	lvx	$xa1,$x10,r12
+	lvx	$xa2,$x20,r12
+	lvx	$xa3,$x30,r12
+
+	vspltw	$xb0,@K[1],0			# smash the key
+	vspltw	$xb1,@K[1],1
+	vspltw	$xb2,@K[1],2
+	vspltw	$xb3,@K[1],3
+
+	vspltw	$xc0,@K[2],0
+	vspltw	$xc1,@K[2],1
+	vspltw	$xc2,@K[2],2
+	vspltw	$xc3,@K[2],3
+
+	vmr	$xd0,$CTR			# smash the counter
+	vspltw	$xd1,@K[3],1
+	vspltw	$xd2,@K[3],2
+	vspltw	$xd3,@K[3],3
+
+	vspltisw $sixteen,-16			# synthesize constants
+	vspltisw $twelve,12
+	vspltisw $eight,8
+	vspltisw $seven,7
+
+Loop_vsx:
+___
+	foreach (&VSX_lane_ROUND(0, 4, 8,12)) { eval; }
+	foreach (&VSX_lane_ROUND(0, 5,10,15)) { eval; }
+$code.=<<___;
+	bdnz	Loop_vsx
+
+	vadduwm	$xd0,$xd0,$CTR
+
+	vmrgew	$xt0,$xa0,$xa1			# transpose data
+	vmrgew	$xt1,$xa2,$xa3
+	vmrgow	$xa0,$xa0,$xa1
+	vmrgow	$xa2,$xa2,$xa3
+	 vmrgew	$xt2,$xb0,$xb1
+	 vmrgew	$xt3,$xb2,$xb3
+	vpermdi	$xa1,$xa0,$xa2,0b00
+	vpermdi	$xa3,$xa0,$xa2,0b11
+	vpermdi	$xa0,$xt0,$xt1,0b00
+	vpermdi	$xa2,$xt0,$xt1,0b11
+
+	vmrgow	$xb0,$xb0,$xb1
+	vmrgow	$xb2,$xb2,$xb3
+	 vmrgew	$xt0,$xc0,$xc1
+	 vmrgew	$xt1,$xc2,$xc3
+	vpermdi	$xb1,$xb0,$xb2,0b00
+	vpermdi	$xb3,$xb0,$xb2,0b11
+	vpermdi	$xb0,$xt2,$xt3,0b00
+	vpermdi	$xb2,$xt2,$xt3,0b11
+
+	vmrgow	$xc0,$xc0,$xc1
+	vmrgow	$xc2,$xc2,$xc3
+	 vmrgew	$xt2,$xd0,$xd1
+	 vmrgew	$xt3,$xd2,$xd3
+	vpermdi	$xc1,$xc0,$xc2,0b00
+	vpermdi	$xc3,$xc0,$xc2,0b11
+	vpermdi	$xc0,$xt0,$xt1,0b00
+	vpermdi	$xc2,$xt0,$xt1,0b11
+
+	vmrgow	$xd0,$xd0,$xd1
+	vmrgow	$xd2,$xd2,$xd3
+	 vspltisw $xt0,4
+	 vadduwm  $CTR,$CTR,$xt0		# next counter value
+	vpermdi	$xd1,$xd0,$xd2,0b00
+	vpermdi	$xd3,$xd0,$xd2,0b11
+	vpermdi	$xd0,$xt2,$xt3,0b00
+	vpermdi	$xd2,$xt2,$xt3,0b11
+
+	vadduwm	$xa0,$xa0,@K[0]
+	vadduwm	$xb0,$xb0,@K[1]
+	vadduwm	$xc0,$xc0,@K[2]
+	vadduwm	$xd0,$xd0,@K[3]
+
+	be?vperm $xa0,$xa0,$xa0,$beperm
+	be?vperm $xb0,$xb0,$xb0,$beperm
+	be?vperm $xc0,$xc0,$xc0,$beperm
+	be?vperm $xd0,$xd0,$xd0,$beperm
+
+	${UCMP}i $len,0x40
+	blt	Ltail_vsx
+
+	lvx_4w	$xt0,$x00,$inp
+	lvx_4w	$xt1,$x10,$inp
+	lvx_4w	$xt2,$x20,$inp
+	lvx_4w	$xt3,$x30,$inp
+
+	vxor	$xt0,$xt0,$xa0
+	vxor	$xt1,$xt1,$xb0
+	vxor	$xt2,$xt2,$xc0
+	vxor	$xt3,$xt3,$xd0
+
+	stvx_4w	$xt0,$x00,$out
+	stvx_4w	$xt1,$x10,$out
+	addi	$inp,$inp,0x40
+	stvx_4w	$xt2,$x20,$out
+	subi	$len,$len,0x40
+	stvx_4w	$xt3,$x30,$out
+	addi	$out,$out,0x40
+	beq	Ldone_vsx
+
+	vadduwm	$xa0,$xa1,@K[0]
+	vadduwm	$xb0,$xb1,@K[1]
+	vadduwm	$xc0,$xc1,@K[2]
+	vadduwm	$xd0,$xd1,@K[3]
+
+	be?vperm $xa0,$xa0,$xa0,$beperm
+	be?vperm $xb0,$xb0,$xb0,$beperm
+	be?vperm $xc0,$xc0,$xc0,$beperm
+	be?vperm $xd0,$xd0,$xd0,$beperm
+
+	${UCMP}i $len,0x40
+	blt	Ltail_vsx
+
+	lvx_4w	$xt0,$x00,$inp
+	lvx_4w	$xt1,$x10,$inp
+	lvx_4w	$xt2,$x20,$inp
+	lvx_4w	$xt3,$x30,$inp
+
+	vxor	$xt0,$xt0,$xa0
+	vxor	$xt1,$xt1,$xb0
+	vxor	$xt2,$xt2,$xc0
+	vxor	$xt3,$xt3,$xd0
+
+	stvx_4w	$xt0,$x00,$out
+	stvx_4w	$xt1,$x10,$out
+	addi	$inp,$inp,0x40
+	stvx_4w	$xt2,$x20,$out
+	subi	$len,$len,0x40
+	stvx_4w	$xt3,$x30,$out
+	addi	$out,$out,0x40
+	beq	Ldone_vsx
+
+	vadduwm	$xa0,$xa2,@K[0]
+	vadduwm	$xb0,$xb2,@K[1]
+	vadduwm	$xc0,$xc2,@K[2]
+	vadduwm	$xd0,$xd2,@K[3]
+
+	be?vperm $xa0,$xa0,$xa0,$beperm
+	be?vperm $xb0,$xb0,$xb0,$beperm
+	be?vperm $xc0,$xc0,$xc0,$beperm
+	be?vperm $xd0,$xd0,$xd0,$beperm
+
+	${UCMP}i $len,0x40
+	blt	Ltail_vsx
+
+	lvx_4w	$xt0,$x00,$inp
+	lvx_4w	$xt1,$x10,$inp
+	lvx_4w	$xt2,$x20,$inp
+	lvx_4w	$xt3,$x30,$inp
+
+	vxor	$xt0,$xt0,$xa0
+	vxor	$xt1,$xt1,$xb0
+	vxor	$xt2,$xt2,$xc0
+	vxor	$xt3,$xt3,$xd0
+
+	stvx_4w	$xt0,$x00,$out
+	stvx_4w	$xt1,$x10,$out
+	addi	$inp,$inp,0x40
+	stvx_4w	$xt2,$x20,$out
+	subi	$len,$len,0x40
+	stvx_4w	$xt3,$x30,$out
+	addi	$out,$out,0x40
+	beq	Ldone_vsx
+
+	vadduwm	$xa0,$xa3,@K[0]
+	vadduwm	$xb0,$xb3,@K[1]
+	vadduwm	$xc0,$xc3,@K[2]
+	vadduwm	$xd0,$xd3,@K[3]
+
+	be?vperm $xa0,$xa0,$xa0,$beperm
+	be?vperm $xb0,$xb0,$xb0,$beperm
+	be?vperm $xc0,$xc0,$xc0,$beperm
+	be?vperm $xd0,$xd0,$xd0,$beperm
+
+	${UCMP}i $len,0x40
+	blt	Ltail_vsx
+
+	lvx_4w	$xt0,$x00,$inp
+	lvx_4w	$xt1,$x10,$inp
+	lvx_4w	$xt2,$x20,$inp
+	lvx_4w	$xt3,$x30,$inp
+
+	vxor	$xt0,$xt0,$xa0
+	vxor	$xt1,$xt1,$xb0
+	vxor	$xt2,$xt2,$xc0
+	vxor	$xt3,$xt3,$xd0
+
+	stvx_4w	$xt0,$x00,$out
+	stvx_4w	$xt1,$x10,$out
+	addi	$inp,$inp,0x40
+	stvx_4w	$xt2,$x20,$out
+	subi	$len,$len,0x40
+	stvx_4w	$xt3,$x30,$out
+	addi	$out,$out,0x40
+	mtctr	r0
+	bne	Loop_outer_vsx
+
+Ldone_vsx:
+	lwz	r12,`$FRAME-4`($sp)		# pull vrsave
+	li	r10,`15+$LOCALS+64`
+	li	r11,`31+$LOCALS+64`
+	$POP	r0, `$FRAME+$LRSAVE`($sp)
+	mtspr	256,r12				# restore vrsave
+	lvx	v26,r10,$sp
+	addi	r10,r10,32
+	lvx	v27,r11,$sp
+	addi	r11,r11,32
+	lvx	v28,r10,$sp
+	addi	r10,r10,32
+	lvx	v29,r11,$sp
+	addi	r11,r11,32
+	lvx	v30,r10,$sp
+	lvx	v31,r11,$sp
+	mtlr	r0
+	addi	$sp,$sp,$FRAME
+	blr
+
+.align	4
+Ltail_vsx:
+	addi	r11,$sp,$LOCALS
+	mtctr	$len
+	stvx_4w	$xa0,$x00,r11			# offload block to stack
+	stvx_4w	$xb0,$x10,r11
+	stvx_4w	$xc0,$x20,r11
+	stvx_4w	$xd0,$x30,r11
+	subi	r12,r11,1			# prepare for *++ptr
+	subi	$inp,$inp,1
+	subi	$out,$out,1
+
+Loop_tail_vsx:
+	lbzu	r6,1(r12)
+	lbzu	r7,1($inp)
+	xor	r6,r6,r7
+	stbu	r6,1($out)
+	bdnz	Loop_tail_vsx
+
+	stvx_4w	$K[0],$x00,r11			# wipe copy of the block
+	stvx_4w	$K[0],$x10,r11
+	stvx_4w	$K[0],$x20,r11
+	stvx_4w	$K[0],$x30,r11
+
+	b	Ldone_vsx
+	.long	0
+	.byte	0,12,0x04,1,0x80,0,5,0
+	.long	0
+.size	.ChaCha20_ctr32_vsx,.-.ChaCha20_ctr32_vsx
+___
+}}}
+$code.=<<___;
+.align	5
+Lconsts:
+	mflr	r0
+	bcl	20,31,\$+4
+	mflr	r12	#vvvvv "distance between . and Lsigma
+	addi	r12,r12,`64-8`
+	mtlr	r0
+	blr
+	.long	0
+	.byte	0,12,0x14,0,0,0,0,0
+	.space	`64-9*4`
+Lsigma:
+	.long   0x61707865,0x3320646e,0x79622d32,0x6b206574
+	.long	1,0,0,0
+	.long	4,0,0,0
+___
+$code.=<<___ 	if ($LITTLE_ENDIAN);
+	.long	0x0e0f0c0d,0x0a0b0809,0x06070405,0x02030001
+	.long	0x0d0e0f0c,0x090a0b08,0x05060704,0x01020300
+___
+$code.=<<___ 	if (!$LITTLE_ENDIAN);	# flipped words
+	.long	0x02030001,0x06070405,0x0a0b0809,0x0e0f0c0d
+	.long	0x01020300,0x05060704,0x090a0b08,0x0d0e0f0c
+___
+$code.=<<___;
+	.long	0x61707865,0x61707865,0x61707865,0x61707865
+	.long	0x3320646e,0x3320646e,0x3320646e,0x3320646e
+	.long	0x79622d32,0x79622d32,0x79622d32,0x79622d32
+	.long	0x6b206574,0x6b206574,0x6b206574,0x6b206574
+	.long	0,1,2,3
+.asciz  "ChaCha20 for PowerPC/AltiVec, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+
+foreach (split("\n",$code)) {
+	s/\`([^\`]*)\`/eval $1/ge;
+
+	# instructions prefixed with '?' are endian-specific and need
+	# to be adjusted accordingly...
+	if ($flavour !~ /le$/) {	# big-endian
+	    s/be\?//		or
+	    s/le\?/#le#/	or
+	    s/\?lvsr/lvsl/	or
+	    s/\?lvsl/lvsr/	or
+	    s/\?(vperm\s+v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+,\s*)(v[0-9]+)/$1$3$2$4/ or
+	    s/vrldoi(\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9]+)/vsldoi$1$2$2 16-$3/;
+	} else {			# little-endian
+	    s/le\?//		or
+	    s/be\?/#be#/	or
+	    s/\?([a-z]+)/$1/	or
+	    s/vrldoi(\s+v[0-9]+,\s*)(v[0-9]+,)\s*([0-9]+)/vsldoi$1$2$2 $3/;
+	}
+
+	print $_,"\n";
+}
+
+close STDOUT;
diff --git a/src/crypto/zinc/chacha20/chacha20.c b/src/crypto/zinc/chacha20/chacha20.c
index b4763c8..42e5360 100644
--- a/src/crypto/zinc/chacha20/chacha20.c
+++ b/src/crypto/zinc/chacha20/chacha20.c
@@ -20,10 +20,12 @@
 #include "chacha20-x86_64-glue.c"
 #elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
 #include "chacha20-arm-glue.c"
 #elif defined(CONFIG_ZINC_ARCH_MIPS)
 #include "chacha20-mips-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_PPC32) || defined(CONFIG_ZINC_ARCH_PPC64)
+#include "chacha20-ppc-glue.c"
 #else
 static bool *const chacha20_nobs[] __initconst = { };
 static void __init chacha20_fpu_init(void)
 {
 }
diff --git a/src/crypto/zinc/chacha20/ppc-xlate.pl b/src/crypto/zinc/chacha20/ppc-xlate.pl
new file mode 100644
index 0000000..2362071
--- /dev/null
+++ b/src/crypto/zinc/chacha20/ppc-xlate.pl
@@ -0,0 +1,353 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# Copyright 2006-2018 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+my $flavour = shift;
+my $output = shift;
+open STDOUT,">$output" || die "can't open $output: $!";
+
+my %GLOBALS;
+my %TYPES;
+my $dotinlocallabels=($flavour=~/linux/)?1:0;
+
+################################################################
+# directives which need special treatment on different platforms
+################################################################
+my $type = sub {
+    my ($dir,$name,$type) = @_;
+
+    $TYPES{$name} = $type;
+    if ($flavour =~ /linux/) {
+	$name =~ s|^\.||;
+	".type	$name,$type";
+    } else {
+	"";
+    }
+};
+my $globl = sub {
+    my $junk = shift;
+    my $name = shift;
+    my $global = \$GLOBALS{$name};
+    my $type = \$TYPES{$name};
+    my $ret;
+
+    $name =~ s|^\.||;
+
+    SWITCH: for ($flavour) {
+	/aix/		&& do { if (!$$type) {
+				    $$type = "\@function";
+				}
+				if ($$type =~ /function/) {
+				    $name = ".$name";
+				}
+				last;
+			      };
+	/osx/		&& do { $name = "_$name";
+				last;
+			      };
+	/linux.*(32|64le)/
+			&& do {	$ret .= ".globl	$name";
+				if (!$$type) {
+				    $ret .= "\n.type	$name,\@function";
+				    $$type = "\@function";
+				}
+				last;
+			      };
+	/linux.*64/	&& do {	$ret .= ".globl	$name";
+				if (!$$type) {
+				    $ret .= "\n.type	$name,\@function";
+				    $$type = "\@function";
+				}
+				if ($$type =~ /function/) {
+				    $ret .= "\n.section	\".opd\",\"aw\"";
+				    $ret .= "\n.align	3";
+				    $ret .= "\n$name:";
+				    $ret .= "\n.quad	.$name,.TOC.\@tocbase,0";
+				    $ret .= "\n.previous";
+				    $name = ".$name";
+				}
+				last;
+			      };
+    }
+
+    $ret = ".globl	$name" if (!$ret);
+    $$global = $name;
+    $ret;
+};
+my $text = sub {
+    my $ret = ($flavour =~ /aix/) ? ".csect\t.text[PR],7" : ".text";
+    $ret = ".abiversion	2\n".$ret	if ($flavour =~ /linux.*64le/);
+    $ret;
+};
+my $machine = sub {
+    my $junk = shift;
+    my $arch = shift;
+    if ($flavour =~ /osx/)
+    {	$arch =~ s/\"//g;
+	$arch = ($flavour=~/64/) ? "ppc970-64" : "ppc970" if ($arch eq "any");
+    }
+    ".machine	$arch";
+};
+my $size = sub {
+    if ($flavour =~ /linux/)
+    {	shift;
+	my $name = shift;
+	my $real = $GLOBALS{$name} ? \$GLOBALS{$name} : \$name;
+	my $ret  = ".size	$$real,.-$$real";
+	$name =~ s|^\.||;
+	if ($$real ne $name) {
+	    $ret .= "\n.size	$name,.-$$real";
+	}
+	$ret;
+    }
+    else
+    {	"";	}
+};
+my $asciz = sub {
+    shift;
+    my $line = join(",",@_);
+    if ($line =~ /^"(.*)"$/)
+    {	".byte	" . join(",",unpack("C*",$1),0) . "\n.align	2";	}
+    else
+    {	"";	}
+};
+my $quad = sub {
+    shift;
+    my @ret;
+    my ($hi,$lo);
+    for (@_) {
+	if (/^0x([0-9a-f]*?)([0-9a-f]{1,8})$/io)
+	{  $hi=$1?"0x$1":"0"; $lo="0x$2";  }
+	elsif (/^([0-9]+)$/o)
+	{  $hi=$1>>32; $lo=$1&0xffffffff;  } # error-prone with 32-bit perl
+	else
+	{  $hi=undef; $lo=$_; }
+
+	if (defined($hi))
+	{  push(@ret,$flavour=~/le$/o?".long\t$lo,$hi":".long\t$hi,$lo");  }
+	else
+	{  push(@ret,".quad	$lo");  }
+    }
+    join("\n",@ret);
+};
+
+################################################################
+# simplified mnemonics not handled by at least one assembler
+################################################################
+my $cmplw = sub {
+    my $f = shift;
+    my $cr = 0; $cr = shift if ($#_>1);
+    # Some out-of-date 32-bit GNU assembler just can't handle cmplw...
+    ($flavour =~ /linux.*32/) ?
+	"	.long	".sprintf "0x%x",31<<26|$cr<<23|$_[0]<<16|$_[1]<<11|64 :
+	"	cmplw	".join(',',$cr,@_);
+};
+my $bdnz = sub {
+    my $f = shift;
+    my $bo = $f=~/[\+\-]/ ? 16+9 : 16;	# optional "to be taken" hint
+    "	bc	$bo,0,".shift;
+} if ($flavour!~/linux/);
+my $bltlr = sub {
+    my $f = shift;
+    my $bo = $f=~/\-/ ? 12+2 : 12;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%x",19<<26|$bo<<21|16<<1 :
+	"	bclr	$bo,0";
+};
+my $bnelr = sub {
+    my $f = shift;
+    my $bo = $f=~/\-/ ? 4+2 : 4;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%x",19<<26|$bo<<21|2<<16|16<<1 :
+	"	bclr	$bo,2";
+};
+my $beqlr = sub {
+    my $f = shift;
+    my $bo = $f=~/-/ ? 12+2 : 12;	# optional "not to be taken" hint
+    ($flavour =~ /linux/) ?		# GNU as doesn't allow most recent hints
+	"	.long	".sprintf "0x%X",19<<26|$bo<<21|2<<16|16<<1 :
+	"	bclr	$bo,2";
+};
+# GNU assembler can't handle extrdi rA,rS,16,48, or when sum of last two
+# arguments is 64, with "operand out of range" error.
+my $extrdi = sub {
+    my ($f,$ra,$rs,$n,$b) = @_;
+    $b = ($b+$n)&63; $n = 64-$n;
+    "	rldicl	$ra,$rs,$b,$n";
+};
+my $vmr = sub {
+    my ($f,$vx,$vy) = @_;
+    "	vor	$vx,$vy,$vy";
+};
+
+# Some ABIs specify vrsave, special-purpose register #256, as reserved
+# for system use.
+my $no_vrsave = ($flavour =~ /aix|linux64le/);
+my $mtspr = sub {
+    my ($f,$idx,$ra) = @_;
+    if ($idx == 256 && $no_vrsave) {
+	"	or	$ra,$ra,$ra";
+    } else {
+	"	mtspr	$idx,$ra";
+    }
+};
+my $mfspr = sub {
+    my ($f,$rd,$idx) = @_;
+    if ($idx == 256 && $no_vrsave) {
+	"	li	$rd,-1";
+    } else {
+	"	mfspr	$rd,$idx";
+    }
+};
+
+# PowerISA 2.06 stuff
+sub vsxmem_op {
+    my ($f, $vrt, $ra, $rb, $op) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|($rb<<11)|($op*2+1);
+}
+# made-up unaligned memory reference AltiVec/VMX instructions
+my $lvx_u	= sub {	vsxmem_op(@_, 844); };	# lxvd2x
+my $stvx_u	= sub {	vsxmem_op(@_, 972); };	# stxvd2x
+my $lvdx_u	= sub {	vsxmem_op(@_, 588); };	# lxsdx
+my $stvdx_u	= sub {	vsxmem_op(@_, 716); };	# stxsdx
+my $lvx_4w	= sub { vsxmem_op(@_, 780); };	# lxvw4x
+my $stvx_4w	= sub { vsxmem_op(@_, 908); };	# stxvw4x
+my $lvx_splt	= sub { vsxmem_op(@_, 332); };	# lxvdsx
+# VSX instruction[s] masqueraded as made-up AltiVec/VMX
+my $vpermdi	= sub {				# xxpermdi
+    my ($f, $vrt, $vra, $vrb, $dm) = @_;
+    $dm = oct($dm) if ($dm =~ /^0/);
+    "	.long	".sprintf "0x%X",(60<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|($dm<<8)|(10<<3)|7;
+};
+
+# PowerISA 2.07 stuff
+sub vcrypto_op {
+    my ($f, $vrt, $vra, $vrb, $op) = @_;
+    "	.long	".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|$op;
+}
+sub vfour {
+    my ($f, $vrt, $vra, $vrb, $vrc, $op) = @_;
+    "	.long	".sprintf "0x%X",(4<<26)|($vrt<<21)|($vra<<16)|($vrb<<11)|($vrc<<6)|$op;
+};
+my $vcipher	= sub { vcrypto_op(@_, 1288); };
+my $vcipherlast	= sub { vcrypto_op(@_, 1289); };
+my $vncipher	= sub { vcrypto_op(@_, 1352); };
+my $vncipherlast= sub { vcrypto_op(@_, 1353); };
+my $vsbox	= sub { vcrypto_op(@_, 0, 1480); };
+my $vshasigmad	= sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1730); };
+my $vshasigmaw	= sub { my ($st,$six)=splice(@_,-2); vcrypto_op(@_, $st<<4|$six, 1666); };
+my $vpmsumb	= sub { vcrypto_op(@_, 1032); };
+my $vpmsumd	= sub { vcrypto_op(@_, 1224); };
+my $vpmsubh	= sub { vcrypto_op(@_, 1096); };
+my $vpmsumw	= sub { vcrypto_op(@_, 1160); };
+# These are not really crypto, but vcrypto_op template works
+my $vaddudm	= sub { vcrypto_op(@_, 192);  };
+my $vadduqm	= sub { vcrypto_op(@_, 256);  };
+my $vmuleuw	= sub { vcrypto_op(@_, 648);  };
+my $vmulouw	= sub { vcrypto_op(@_, 136);  };
+my $vrld	= sub { vcrypto_op(@_, 196);  };
+my $vsld	= sub { vcrypto_op(@_, 1476); };
+my $vsrd	= sub { vcrypto_op(@_, 1732); };
+my $vsubudm	= sub { vcrypto_op(@_, 1216); };
+my $vaddcuq	= sub { vcrypto_op(@_, 320);  };
+my $vaddeuqm	= sub { vfour(@_,60); };
+my $vaddecuq	= sub { vfour(@_,61); };
+my $vmrgew	= sub { vfour(@_,0,1932); };
+my $vmrgow	= sub { vfour(@_,0,1676); };
+
+my $mtsle	= sub {
+    my ($f, $arg) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($arg<<21)|(147*2);
+};
+
+# VSX instructions masqueraded as AltiVec/VMX
+my $mtvrd	= sub {
+    my ($f, $vrt, $ra) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|(179<<1)|1;
+};
+my $mtvrwz	= sub {
+    my ($f, $vrt, $ra) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($vrt<<21)|($ra<<16)|(243<<1)|1;
+};
+my $lvwzx_u	= sub { vsxmem_op(@_, 12); };	# lxsiwzx
+my $stvwx_u	= sub { vsxmem_op(@_, 140); };	# stxsiwx
+
+# PowerISA 3.0 stuff
+my $maddhdu	= sub { vfour(@_,49); };
+my $maddld	= sub { vfour(@_,51); };
+my $darn = sub {
+    my ($f, $rt, $l) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($rt<<21)|($l<<16)|(755<<1);
+};
+my $iseleq = sub {
+    my ($f, $rt, $ra, $rb) = @_;
+    "	.long	".sprintf "0x%X",(31<<26)|($rt<<21)|($ra<<16)|($rb<<11)|(2<<6)|30;
+};
+# VSX instruction[s] masqueraded as made-up AltiVec/VMX
+my $vspltib	= sub {				# xxspltib
+    my ($f, $vrt, $imm8) = @_;
+    $imm8 = oct($imm8) if ($imm8 =~ /^0/);
+    $imm8 &= 0xff;
+    "	.long	".sprintf "0x%X",(60<<26)|($vrt<<21)|($imm8<<11)|(360<<1)|1;
+};
+
+# PowerISA 3.0B stuff
+my $addex = sub {
+    my ($f, $rt, $ra, $rb, $cy) = @_;	# only cy==0 is specified in 3.0B
+    "	.long	".sprintf "0x%X",(31<<26)|($rt<<21)|($ra<<16)|($rb<<11)|($cy<<9)|(170<<1);
+};
+my $vmsumudm	= sub { vfour(@_,35); };
+
+while($line=<>) {
+
+    $line =~ s|[#!;].*$||;	# get rid of asm-style comments...
+    $line =~ s|/\*.*\*/||;	# ... and C-style comments...
+    $line =~ s|^\s+||;		# ... and skip white spaces in beginning...
+    $line =~ s|\s+$||;		# ... and at the end
+
+    {
+	$line =~ s|\.L(\w+)|L$1|g;	# common denominator for Locallabel
+	$line =~ s|\bL(\w+)|\.L$1|g	if ($dotinlocallabels);
+    }
+
+    {
+	$line =~ s|(^[\.\w]+)\:\s*||;
+	my $label = $1;
+	if ($label) {
+	    my $xlated = ($GLOBALS{$label} or $label);
+	    print "$xlated:";
+	    if ($flavour =~ /linux.*64le/) {
+		if ($TYPES{$label} =~ /function/) {
+		    printf "\n.localentry	%s,0\n",$xlated;
+		}
+	    }
+	}
+    }
+
+    {
+	$line =~ s|^\s*(\.?)(\w+)([\.\+\-]?)\s*||;
+	my $c = $1; $c = "\t" if ($c eq "");
+	my $mnemonic = $2;
+	my $f = $3;
+	my $opcode = eval("\$$mnemonic");
+	$line =~ s/\b(c?[rf]|v|vs)([0-9]+)\b/$2/g if ($c ne "." and $flavour !~ /osx/);
+	if (ref($opcode) eq 'CODE') { $line = &$opcode($f,split(/,\s*/,$line)); }
+	elsif ($mnemonic)           { $line = $c.$mnemonic.$f."\t".$line; }
+    }
+
+    print $line if ($line);
+    print "\n";
+}
+
+close STDOUT;
-- 
2.20.1

_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard

^ permalink raw reply	[flat|nested] 6+ messages in thread