ok thanks, what is confusing me it that allowed ip is for : - authorized source packet - routing outgoing packet and we can set allowedips with a lot of ip / netmask Regards, Nicolas 2017-02-24 14:10 GMT+01:00 Dan Lüdtke : > Nicolas, > > I draw your network including the allowed_ips restrictions. > > > ping peer3 --peer1--->peer2 : not ok . > > This can not work! Peer 2 does not accept the source address from Peer 3. > Please review your allowed_ips settings. Draw the things on paper, make > PostIt notes representing the packets including their destination address > and source address. Draw a little "firewall" on the tunnels (whitelist is > allowed_ips, all the rest gets dropped!) and see if the PostIt can make it > through with it's source address. Yes, this sounds like child play, but it > works. I have taught complex firewalling and VPN setups to lawyers and law > makers this way. It helps understanding, if a simple diagram does not cut > it. > > Allowed IPs is probably the most complex thing WireGuard has to offer from > a user perspective. Rename it to Allowed Source Addrresses in your head it > becomes clearer. > > HTH > > Dan > > > On 24 Feb 2017, at 11:41, Nicolas Prochazka > wrote: > > > > hello again, > > my configuration , > > ping peer 1-->peer 2 : ok ( on ipv6 wg0 ) > > ping peer 3 --> peer 1 : ok > > ping peer3 --peer1--->peer2 : not ok . > > > > > > On peer 1 , forwarding is setting > > net.ipv6.conf.all.forwarding = 1 > > net.ipv4.conf.all.forwarding = 1 > > > > > > Peer 1 : wg configuration > > > > interface: wg0 > > public key: q5ypTBI7bN0vPGzvlGYyF6pCqYgrDsEjO827duAwjX4= > > private key: (hidden) > > listening port: 6081 > > > > peer: dOXT9AvlEt9KSl3ricE12GuVa+U4XB0s1c92s8W+9VA= > > endpoint: 52.49.x.x:6081 > > allowed ips: ::/0 > > latest handshake: 8 seconds ago > > transfer: 71.29 KiB received, 60.28 KiB sent > > persistent keepalive: every 25 seconds > > > > peer: bqwiLTe/hr0JJMz3IvnDXqS5nOT6u/WL75dasmTE/ko= > > endpoint: 10.10.0.69:6081 > > allowed ips: fd00::baae:edff:fe72:5094/128 > > latest handshake: 45 seconds ago > > transfer: 5.49 KiB received, 6.36 KiB sent > > > > > > Peer 3 : > > > > > > interface: wg0 > > public key: bqwiLTe/hr0JJMz3IvnDXqS5nOT6u/WL75dasmTE/ko= > > private key: (hidden) > > listening port: 6081 > > > > peer: q5ypTBI7bN0vPGzvlGYyF6pCqYgrDsEjO827duAwjX4= > > endpoint: 10.10.99.230:6081 > > allowed ips: ::/0 > > latest handshake: 33 seconds ago > > transfer: 4.92 KiB received, 7.55 KiB sent > > persistent keepalive: every 25 seconds > > > > > > Peer 2 : > > > > interface: wg0 > > public key: dOXT9AvlEt9KSl3ricE12GuVa+U4XB0s1c92s8W+9VA= > > private key: (hidden) > > listening port: 6081 > > > > peer: q5ypTBI7bN0vPGzvlGYyF6pCqYgrDsEjO827duAwjX4= > > endpoint: 77.156.x.x:58943 > > allowed ips: fd00::eea8:6bff:fef9:23bc/128 > > latest handshake: 1 minute, 43 seconds ago > > transfer: 52.59 KiB received, 79.01 KiB sent > > > > > > 2017-02-23 14:41 GMT+01:00 Dan Lüdtke : > > Nicolas: Could you provide the configuration files? Because from your > little graphic or schema I can not even derive what you are configuring. I > guess there is something overlapping prefixes maybe? > > > > Jason: I think we are approaching the point in time when there will be a > -dev and a -users ML :) > > > > > > > On 23 Feb 2017, at 14:03, Nicolas Prochazka < > nicolas.prochazka@gmail.com> wrote: > > > > > > Hello, i'm trying to do this with wireguard, withtout success : > > > > > > peer1 ---> peer2 : config ok , works > > > peer3 ---> peer1 : config ok , works > > > peer3 --->peer1 ---> peer2 : not ok . > > > > > > I suspect allowed-ip configuration, but all my tests does not works. > > > perhaps I must create two wireguard interface on peer 1 and do > forwarding/routing ? > > > i'm using ipv6 as internal ip. > > > > > > so my question is : > > > - two interface ? > > > - specifiq magic allowedip ? > > > ( allowed ip is confusing for, it is using for routing and for > evicting paquet ? ) > > > > > > Regards, > > > Nicolas > > > _______________________________________________ > > > WireGuard mailing list > > > WireGuard@lists.zx2c4.com > > > https://lists.zx2c4.com/mailman/listinfo/wireguard > > > > > >