Development discussion of WireGuard
 help / color / mirror / Atom feed
* client uses wrong source ip for outgoing connections
@ 2021-11-18 23:40 Christoph Loesch
  2021-11-19  0:11 ` Christoph Loesch
  0 siblings, 1 reply; 3+ messages in thread
From: Christoph Loesch @ 2021-11-18 23:40 UTC (permalink / raw)
  To: WireGuard mailing list

Hi,

I am using wireguard on about 20 EdgeRouters (based on Debian stretch).
Each router has exact same configuration (apart from router ip addresses and wireguard keys/passphrases).
Works very well on most of them but on five routers wireguard uses the wrong ip address for outgoing connections over the tunnel.
All routers use kernel 4.14.54-UBNT and wireguard-tools v1.0.20210914
Wireguard debian package is from github/WireGuard/wireguard-vyatta-ubnt

On the problematic routers the public ip address is used for the tunnel instead the private ip address.
Interestingly even in the bad example the wg tunnel is running and the server can reach the routers(=wg clients), but not the other way round.

In the following examples 172.27.0.1 is the wireguard server internal ip address.
Routers use ip addresses in the 10.0.0.0/8 range for the wg tunnel which are allowed on the server.
I already even debugged this with tcpdump where I found out it uses the wrong ip.
But looking at a simple ping you also notice the wrong ip after the word "from".

Good example:
eng196-router:~$ \ping -I wg0 -c1 172.27.0.1
ping: Warning: source address might be selected on device other than wg0.
PING 172.27.0.1 (172.27.0.1) from 10.29.85.100 wg0: 56(84) bytes of data.
64 bytes from 172.27.0.1: icmp_seq=1 ttl=64 time=6.82 ms
--- 172.27.0.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 6.826/6.826/6.826/0.000 ms

Bad example:
zi1-router:~$ \ping -I wg0 -c1 172.27.0.1
ping: Warning: source address might be selected on device other than wg0.
PING 172.27.0.1 (172.27.0.1) from 78.41.x.y wg0: 56(84) bytes of data.
--- 172.27.0.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms

Configurations:
eng196-router:~# wg
interface: wg0
   public key: SoV2obcH0qWfCRY3gZbkLNeMa1QRcnhNDCeiI9weszA=
   private key: (hidden)
   listening port: 58205
peer: 1syRMYD1jIVFMUMm5hF/j0MzjMQmuC5mlcT1VVugIkU=
   preshared key: (hidden)
   endpoint: 86.59.x.y:1024
   allowed ips: 172.27.0.0/24, 10.5.44.0/24
   latest handshake: 53 seconds ago
   transfer: 24.57 MiB received, 26.48 MiB sent
   persistent keepalive: every 25 seconds

zi1-router:~# wg
interface: wg0
   public key: aYtVhblpR0XSsAb/dXF3zM9Hu+LxlvrR5RWFU2psF3M=
   private key: (hidden)
   listening port: 45514
peer: 1syRMYD1jIVFMUMm5hF/j0MzjMQmuC5mlcT1VVugIkU=
   preshared key: (hidden)
   endpoint: 86.59.x.y:51820
   allowed ips: 172.27.0.0/24, 10.5.44.0/24
   latest handshake: 13 seconds ago
   transfer: 1.79 MiB received, 6.26 MiB sent
   persistent keepalive: every 25 seconds

What could cause the wrong selection?
Why does that work for most routers but for some not? There must be some difference or something gets confused up by specific ip addresses I guess?
How could I debug this further to find the difference and/or cause for this problem?

Thanks for any hints and kind regards,
Christoph


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-11-23 16:26 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-18 23:40 client uses wrong source ip for outgoing connections Christoph Loesch
2021-11-19  0:11 ` Christoph Loesch
2021-11-23 16:26   ` Christoph Loesch

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).