From: Daniel <tech@tootai.net>
To: wireguard@lists.zx2c4.com
Subject: Re: ipv6 connexion fail - ipv4 OK
Date: Tue, 31 Aug 2021 19:50:16 +0200 [thread overview]
Message-ID: <d7095107-050f-2075-00cb-fdaa86d6daf5@tootai.net> (raw)
In-Reply-To: <20210830225927.6df90edb@natsu>
Hi
Le 30/08/2021 à 19:59, Roman Mamedov a écrit :
> On Mon, 30 Aug 2021 19:44:21 +0200
> Daniel <tech@tootai.net> wrote:
>
>>> Do you get WG working at all, between some other two hosts (not involving this
>>> particular server for now)?
>> Yes. Clients are shown on both sides as connected, trafic seems to go
>> out on each side but other one as received near to nothing.
> I mean not just "shown as connected", but have you got actual traffic working
> between any two hosts. Even just forgetting this server for a while. So that
> you can rule out some general issue and concentrate on just the particular
> machine setup.
I went a step further. Server has a /64 on eth0, his address being .1/64
Interface I gave to wireguard is called wigserver and get .a2/64 as
address when up. Now I start the client which is a .24/64 while tcpdump
-ni any udp and port 38194 is running on the server. Output is
19:28:45.790295 eth0 In IP6 2001:db8:16e:10::24.50012 >
2001:db8:c2c:7c50::a2.38194: UDP, length 148
19:28:45.790629 eth0 Out IP6 2001:db8:c2c:7c50::a2.38194 >
2001:db8:16e:10::24.50012: UDP, length 92
19:29:06.572059 eth0 Out IP6 2001:db8:c2c:7c50::1.38194 >
2001:db8:16e:10::24.50012: UDP, length 148
19:29:11.947969 eth0 Out IP6 2001:db8:c2c:7c50::1.38194 >
2001:db8:16e:10::24.50012: UDP, length 148
19:29:17.324065 eth0 Out IP6 2001:db8:c2c:7c50::1.38194 >
2001:db8:16e:10::24.50012: UDP, length 148
As you can see, the original request is going to the right IP which
respond with the right source IP (line 1 and 2) From here, all packets
are going out with the IP of eth0 not the one from wigserver which is
.a2/64. The client has "allowed ips = 10.99.98.0/27, ::/0"
Remember, no FW involved. Before this test I bring up interfaces without
wireguard configuration and did server/client test like nc -lu IP PORT
on the server while on the client I used nc -u IP PORT Everything worked
well. I also started the client while server was not running and got the
ICMP6 respons "unreachable port" sended to the client. I also tried to
tell to the client to connect to the .1/64 insteed of the .a2/64, didn't
work
If someone had an idea on what's going on here, would be helpful ;)
--
Daniel
next prev parent reply other threads:[~2021-08-31 17:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 15:25 Daniel
2021-08-26 11:14 ` Daniel
2021-08-27 16:14 ` Roman Mamedov
2021-08-27 17:16 ` Daniel
2021-08-27 21:35 ` [Warning: DMARC Fail Email] " Mike O'Connor
2021-08-27 21:44 ` Roman Mamedov
2021-08-27 21:54 ` Mike O'Connor
2021-08-30 10:24 ` Daniel
2021-08-30 12:55 ` Skyler Mäntysaari
2021-08-30 16:43 ` Roman Mamedov
2021-08-30 17:28 ` Daniel
2021-08-30 17:38 ` Roman Mamedov
2021-08-30 17:44 ` Daniel
2021-08-30 17:59 ` Roman Mamedov
2021-08-31 17:50 ` Daniel [this message]
2021-09-01 17:44 ` Daniel
2021-09-03 13:59 ` ipv6 connexion fail - ipv4 OK (SOLVED) Daniel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d7095107-050f-2075-00cb-fdaa86d6daf5@tootai.net \
--to=tech@tootai.net \
--cc=wireguard@lists.zx2c4.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).