* How to kill string but leave it in history?
@ 1997-01-16 10:59 Andrej Borsenkow
1997-01-16 12:15 ` Peter Stephenson
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Andrej Borsenkow @ 1997-01-16 10:59 UTC (permalink / raw)
To: Zsh users mailing list
Suppose, I type in long command and realize, I made some mistake (or I
need to look for additional info). If I cancel line with DEL (or ^C) the
line gets lost and I have to retype it - nor very handy.
I understand, that I can push it on stack, but it then pops up
automatically after next command - not what I want.
So - is there any way to cancel current command line but leave it in
history?
thanks in advance
Oh, yes - zsh 3.1.0 (without dynamic support)
-------------------------------------------------------------------------
Andrej Borsenkow Fax: +7 (095) 252 01 05
SNI ITS Moscow Tel: +7 (095) 252 13 88
NERV: borsenkow.msk E-Mail: borsenkow.msk@sni.de
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 10:59 How to kill string but leave it in history? Andrej Borsenkow
@ 1997-01-16 12:15 ` Peter Stephenson
1997-01-16 13:36 ` Andrej Borsenkow
1997-01-16 14:02 ` Juergen Christoffel
1997-01-16 14:40 ` Zefram
2 siblings, 1 reply; 13+ messages in thread
From: Peter Stephenson @ 1997-01-16 12:15 UTC (permalink / raw)
To: Zsh users mailing list
Andrej Borsenkow wrote:
> So - is there any way to cancel current command line but leave it in
> history?
how about
bindkey -s "^X^H" "^['^A print -s ^M"
works best with histignorespace set.
--
Peter Stephenson <pws@ifh.de> Tel: +49 33762 77366
WWW: http://www.ifh.de/~pws/ Fax: +49 33762 77413
Deutsches Elektronen-Synchrotron --- Institut fuer Hochenergiephysik Zeuthen
DESY-IfH, 15735 Zeuthen, Germany.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 12:15 ` Peter Stephenson
@ 1997-01-16 13:36 ` Andrej Borsenkow
1997-01-16 13:54 ` Peter Stephenson
0 siblings, 1 reply; 13+ messages in thread
From: Andrej Borsenkow @ 1997-01-16 13:36 UTC (permalink / raw)
To: Peter Stephenson; +Cc: Zsh users mailing list
On Thu, 16 Jan 1997, Peter Stephenson wrote:
> Andrej Borsenkow wrote:
> > So - is there any way to cancel current command line but leave it in
> > history?
>
> how about
>
> bindkey -s "^X^H" "^['^A print -s ^M"
>
> works best with histignorespace set.
>
Not exactly.
1. It doesn't work with multiline command (sorry, I had to be more precise
on this). E.g.
if .... then
if> kkldsfkl; ^X^H
Doesn't push the whole in history.
2. It echows the whole command (well, rather cosmetic).
Actually standard 'push-line' would suite just fine - _if_ it wouldn't pop
line again after next command.
thanks
-------------------------------------------------------------------------
Andrej Borsenkow Fax: +7 (095) 252 01 05
SNI ITS Moscow Tel: +7 (095) 252 13 88
NERV: borsenkow.msk E-Mail: borsenkow.msk@sni.de
-------------------------------------------------------------------------
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 13:36 ` Andrej Borsenkow
@ 1997-01-16 13:54 ` Peter Stephenson
0 siblings, 0 replies; 13+ messages in thread
From: Peter Stephenson @ 1997-01-16 13:54 UTC (permalink / raw)
To: Zsh users mailing list
Andrej Borsenkow wrote:
> 1. It doesn't work with multiline command (sorry, I had to be more precise
> on this). E.g.
This gets tricky, because there's currently no reliable way of going to the
beginning/end of the buffer or even of the line: if you're there already,
the corresponding commands take you somewhere else. So I've just set it
to go to 100 end/beginning of lines to get to the end/beginning of the
buffer. That's not very nice. Perhaps Zefram has some plans for this.
bindkey -s '\C-X\C-H' '\M-1\M-0\M-0\C-e\C-@\M-1\M-0\M-0\C-a print -s \M-"\C-M'
> 2. It echows the whole command (well, rather cosmetic).
There's no builtin command you can use, so you have to trick it somehow.
I can't see any way of avoiding this.
--
Peter Stephenson <pws@ifh.de> Tel: +49 33762 77366
WWW: http://www.ifh.de/~pws/ Fax: +49 33762 77413
Deutsches Elektronen-Synchrotron --- Institut fuer Hochenergiephysik Zeuthen
DESY-IfH, 15735 Zeuthen, Germany.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 10:59 How to kill string but leave it in history? Andrej Borsenkow
1997-01-16 12:15 ` Peter Stephenson
@ 1997-01-16 14:02 ` Juergen Christoffel
1997-01-16 14:40 ` Zefram
2 siblings, 0 replies; 13+ messages in thread
From: Juergen Christoffel @ 1997-01-16 14:02 UTC (permalink / raw)
To: borsenkow.msk; +Cc: zsh-users
Date: Thu, 16 Jan 1997 13:59:45 +0300 (MSK)
From: Andrej Borsenkow <borsenkow.msk@sni.de>
So - is there any way to cancel current command line but leave it in
history?
Using emacs-mode I simple go to the beginning of the line (c-A), then
quote the line (ESC-') and write echo before it and execute it. Thus
it isn't executed but in the history and it's easy to retrieve.
Nothing fancy but works for me.
--jc
--
E-Mail: christoffel@gmd.de or one of {ftp,news,web}master@gmd.de
GMD - German National Research Center for Information Technology
GMD pays for my technical expertise. My opinions probably scare them...
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 10:59 How to kill string but leave it in history? Andrej Borsenkow
1997-01-16 12:15 ` Peter Stephenson
1997-01-16 14:02 ` Juergen Christoffel
@ 1997-01-16 14:40 ` Zefram
1997-01-16 16:27 ` Roderick Schertler
2 siblings, 1 reply; 13+ messages in thread
From: Zefram @ 1997-01-16 14:40 UTC (permalink / raw)
To: borsenkow.msk; +Cc: zsh-users
Andrej Borsenkow wrote:
>So - is there any way to cancel current command line but leave it in
>history?
This is exactly what pound-insert is for. I use it often.
-zefram
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 14:40 ` Zefram
@ 1997-01-16 16:27 ` Roderick Schertler
1997-01-16 16:37 ` Zefram
0 siblings, 1 reply; 13+ messages in thread
From: Roderick Schertler @ 1997-01-16 16:27 UTC (permalink / raw)
To: Zefram; +Cc: borsenkow.msk, zsh-users
On Thu, 16 Jan 1997 14:40:54 +0000 (GMT), Zefram <zefram@dcs.warwick.ac.uk> said:
> Andrej Borsenkow wrote:
>>
>> So - is there any way to cancel current command line but leave it in
>> history?
>
> This is exactly what pound-insert is for. I use it often.
It doesn't work for multiline commands, though. Here's a binding (set
up for vi mode) which works if none of the editing lines were zsh-forced
continuations (which I don't understand, seems like a bug):
bindkey -a -s q '\M-xpush-input\C-maread -z _buf; print -s $_buf\C-m'
Which reminds me, it has always bugged me that if zsh creates a
continuation line (like
$ print "foo<return>
dquote> _
) I can't go from the dquote> line back up to the first line (my
workaround is to get onto a blank line and interrupt, then pull up the
history). Is it just me? Is there a way not to have this happen?
--
Roderick Schertler
roderick@gate.net
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 16:27 ` Roderick Schertler
@ 1997-01-16 16:37 ` Zefram
1997-01-16 17:41 ` Roderick Schertler
[not found] ` <pws@ifh.de>
0 siblings, 2 replies; 13+ messages in thread
From: Zefram @ 1997-01-16 16:37 UTC (permalink / raw)
To: Roderick Schertler; +Cc: zefram, borsenkow.msk, zsh-users
Roderick Schertler wrote:
>> This is exactly what pound-insert is for. I use it often.
>
>It doesn't work for multiline commands, though.
Yes it does. It adds a # at the beginning of each line. Or do you
mean continuation lines? push-input may help here.
>Which reminds me, it has always bugged me that if zsh creates a
>continuation line (like
>
> $ print "foo<return>
> dquote> _
>
>) I can't go from the dquote> line back up to the first line
Yes, this is what push-input is for.
-zefram
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: How to kill string but leave it in history?
1997-01-16 16:37 ` Zefram
@ 1997-01-16 17:41 ` Roderick Schertler
[not found] ` <pws@ifh.de>
1 sibling, 0 replies; 13+ messages in thread
From: Roderick Schertler @ 1997-01-16 17:41 UTC (permalink / raw)
To: Zefram; +Cc: zsh-users
On Thu, 16 Jan 1997 16:37:52 +0000 (GMT), Zefram <zefram@dcs.warwick.ac.uk> said:
> Roderick Schertler wrote:
>>>
>>> This is exactly what pound-insert is for. I use it often.
>>
>> It doesn't work for multiline commands, though.
>
> Yes it does. It adds a # at the beginning of each line. Or do you
> mean continuation lines? push-input may help here.
Right, I hadn't clued to the fact that it was continuation lines which
were the problem. I also hadn't thought of using push-input to edit
back before a continuation, and I even regularly use push-input.
Thanks. Here's a hint for the documentation which might save others
this trouble.
--- Doc/zshzle.man.~1~ Tue Dec 17 15:14:11 1996
+++ Doc/zshzle.man Thu Jan 16 12:34:30 1997
@@ -653,6 +653,8 @@
Next time the editor starts up or is popped with \fBget-line\fP, the
construct will be popped off the top of the buffer stack and loaded
into the editing buffer.
+This is currently the best way to edit text above a zsh-forced line
+continuation.
.TP
\fBpush-line\fP (^Q ESC-Q ESC-q) (unbound) (unbound)
Push the current buffer onto the buffer stack and clear
--- Doc/zshparam.man.~1~ Tue Aug 13 16:24:13 1996
+++ Doc/zshparam.man Thu Jan 16 12:35:52 1997
@@ -685,6 +685,8 @@
Recognizes the same escape sequences as \fB$PS1\fP.
The default is "%_> ", which displays any shell constructs or quotation
marks which are currently being processed.
+The best way to edit the continuation text along with the initial part
+of the command is to use the \fBpush-input\fP editor command.
.TP
.B PS3
Selection prompt used within a \fBselect\fP loop.
--
Roderick Schertler
roderick@gate.net
^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <pws@ifh.de>]
end of thread, other threads:[~1997-01-17 9:14 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1997-01-16 10:59 How to kill string but leave it in history? Andrej Borsenkow
1997-01-16 12:15 ` Peter Stephenson
1997-01-16 13:36 ` Andrej Borsenkow
1997-01-16 13:54 ` Peter Stephenson
1997-01-16 14:02 ` Juergen Christoffel
1997-01-16 14:40 ` Zefram
1997-01-16 16:27 ` Roderick Schertler
1997-01-16 16:37 ` Zefram
1997-01-16 17:41 ` Roderick Schertler
[not found] ` <pws@ifh.de>
[not found] ` <roderick@gate.net>
[not found] ` <zefram@dcs.warwick.ac.uk>
1997-01-16 18:21 ` Bart Schaefer
1997-01-16 18:39 ` Zefram
1997-01-17 9:05 ` Bart Schaefer
1997-01-16 19:21 ` Roderick Schertler
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/zsh/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).