zsh-users
 help / color / mirror / code / Atom feed
* zsh 4.1.1 make check errors on OS X 10.2
@ 2004-01-01  0:34 Culley Harrelson
  2004-01-01  1:32 ` zsh 4.1.1 make check errors on OS X 10.3 [was: 10.2] James Devenish
  0 siblings, 1 reply; 6+ messages in thread
From: Culley Harrelson @ 2004-01-01  0:34 UTC (permalink / raw)
  To: zsh-users

I am new to zsh so I don't know how to do further tests on the below 
errors.  It installed fine and seems to be working without problems.  
With 10.3 out now my environment is getting obscure but I thought I 
would post these test results anyway...

culley

=============
culley@localhost ~/Documents/software/zsh-4.1.1
  % make check
cd Test ; make check
if test -n ""; then \
   cd .. && DESTDIR= \
   make MODDIR=`pwd`/Test/Modules install.modules > /dev/null; \
fi
for f in ./*.ztst; do \
   ../Src/zsh +Z -f ./ztst.zsh $f; \
done
./A01grammar.ztst: starting.
This test hangs the shell when it fails...
./A01grammar.ztst: all tests successful.
./A02alias.ztst: starting.
./A02alias.ztst: all tests successful.
./A03quoting.ztst: starting.
./A03quoting.ztst: all tests successful.
./A04redirect.ztst: starting.
./A04redirect.ztst: all tests successful.
./A05execution.ztst: starting.
./A05execution.ztst: all tests successful.
./A06assign.ztst: starting.
./A06assign.ztst: all tests successful.
./B01cd.ztst: starting.
./B01cd.ztst: all tests successful.
./B02typeset.ztst: starting.
./B02typeset.ztst: all tests successful.
./B03print.ztst: starting.
./B03print.ztst: all tests successful.
./B04read.ztst: starting.
./B04read.ztst: all tests successful.
./C01arith.ztst: starting.
./C01arith.ztst: all tests successful.
./C02cond.ztst: starting.
Test ./C02cond.ztst failed: bad status 1, expected 0 from:
   sleep 1
   cat unmodified
   touch newnewnew
   if [[ $OSTYPE == "cygwin" ]]; then
     print -u8 "Warning: not testing [[ -N file ]] (not supported on 
Cygwin)"
     true
   else
     [[ -N newnewnew && ! -N unmodified ]]
   fi
Was testing: -N cond
./C02cond.ztst: test failed.
The following may (or may not) help identifying the cause:
   This test can fail on NFS-mounted filesystems as the access and
   modification times are not updated separately.  This does not indicate
   a problem in the shell.
./C03traps.ztst: starting.
This test takes at least three seconds...
This test, too, takes at least three seconds...
./C03traps.ztst: all tests successful.
./C04funcdef.ztst: starting.
./C04funcdef.ztst: all tests successful.
./D01prompt.ztst: starting.
./D01prompt.ztst: all tests successful.
./D02glob.ztst: starting.
./D02glob.ztst: all tests successful.
./D03procsubst.ztst: starting.
./D03procsubst.ztst: all tests successful.
./D04parameter.ztst: starting.
./D04parameter.ztst: all tests successful.
./D05array.ztst: starting.
./D05array.ztst: all tests successful.
./D06subscript.ztst: starting.
./D06subscript.ztst: all tests successful.
./E01options.ztst: starting.
./E01options.ztst: all tests successful.
./E02xtrace.ztst: starting.
./E02xtrace.ztst: all tests successful.
./V01zmodload.ztst: starting.
Warning: zsh/example not linked: not checking autoloading
./V01zmodload.ztst: all tests successful.
./V02zregexparse.ztst: starting.
./V02zregexparse.ztst: all tests successful.
./Y01completion.ztst: starting.
comptestinit:7: failed to load module: zsh/zpty
Test ./Y01completion.ztst failed: non-zero status from preparation code:
   comptestinit -z $ZTST_testdir/../Src/zsh &&
   {
     mkdir dir1 &&
     mkdir dir2 &&
     touch file1 &&
     touch file2
   }
./Y01completion.ztst: test failed.
Test ./Y01completion.ztst failed: bad status 1, expected 0 from:
   comptest $': \t\t\t\t\t\t\t'
Error output:
comptest:2: command not found: zpty
comptest:3: command not found: zpty
Was testing: directories and files
./Y01completion.ztst: test failed.
./Y02compmatch.ztst: starting.
comptestinit:7: failed to load module: zsh/zpty
Test ./Y02compmatch.ztst failed: non-zero status from preparation code:
   comptestinit -z $ZTST_testdir/../Src/zsh &&
   {
     list1=(IndianRed IndianRed2 IndianRed3 IndianRed4)
     test_code () {
         matcher=$1;
         list=$2;
         code="compdef _tst tst ; _tst () { echo -n '<COMPADD>';compadd 
-M '"
         code="$code$matcher"
         code="$code'  - ${(P)list} ; echo  -n '</COMPADD>'"
         code="$code; $extra_cmd"
         code="$code; echo -n '<INSERT_POSITIONS>'"
         code="$code; echo \$compstate[insert_positions]"
         code="$code; echo -n '</INSERT_POSITIONS>'"
         code="$code}"
         comptesteval "$code"
     }
   }
./Y02compmatch.ztst: test failed.
Test ./Y02compmatch.ztst failed: bad status 1, expected 0 from:
  test_code z: list1
  comptest  $'tst \t'
Error output:
(eval):1: command not found: test_code
comptest:2: command not found: zpty
comptest:3: command not found: zpty
Was testing: Match Error for "z:"
./Y02compmatch.ztst: test failed.
./Y03arguments.ztst: starting.
comptestinit:7: failed to load module: zsh/zpty
Test ./Y03arguments.ztst failed: non-zero status from preparation code:
   comptestinit -z $ZTST_testdir/../Src/zsh &&
   {
     comptesteval 'compdef _tst tst'
     tst_arguments () { comptesteval "_tst () { _arguments ${${(@qq)*}} 
}" }
   }
./Y03arguments.ztst: test failed.
Test ./Y03arguments.ztst failed: bad status 1, expected 0 from:
  tst_arguments ':desc1:(arg1)'
  comptest $'tst \t\C-wa\t\C-war\t\C-warg\t\C-warg1\t\C-wr\t\C-wx\t \ty 
\t'
Error output:
(eval):1: command not found: tst_arguments
comptest:2: command not found: zpty
comptest:3: command not found: zpty
Was testing: one non-option argument
./Y03arguments.ztst: test failed.
make[1]: [check] Error 1 (ignored)
rm -rf Modules .zcompdump


^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-01-08 11:27 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-01-01  0:34 zsh 4.1.1 make check errors on OS X 10.2 Culley Harrelson
2004-01-01  1:32 ` zsh 4.1.1 make check errors on OS X 10.3 [was: 10.2] James Devenish
2004-01-01 16:10   ` Culley Harrelson
2004-01-02  2:30     ` James Devenish
2004-01-08 11:26   ` Oliver Kiddle
2004-01-08 11:27     ` James Devenish

Code repositories for project(s) associated with this public inbox

	https://git.vuxu.org/mirror/zsh/

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).