* IRIX 5.3 specific problems
@ 2001-07-02 11:18 Oliver Kiddle
2001-07-02 11:28 ` Andrej Borsenkow
0 siblings, 1 reply; 3+ messages in thread
From: Oliver Kiddle @ 2001-07-02 11:18 UTC (permalink / raw)
To: zsh-workers
This is on a completely fresh installation of IRIX. I'd have done this
before but a faulty hard drive was causing a number of extra problems.
The first problem is that the configure test for `if named FIFOs work'
hangs. I've fixed this by changing the open() on the reading side of
the fifo from O_RDWR to O_RDONLY.
After this, everything compiles fine except for this warning.
cfe: Warning: 566: compat.c: 187: text following #endif violates the
ANSI C standard.
It was caused by the use of a C++ comment which I've corrected.
Running the tests produced a few failures. Most can be put down to zpty
which doesn't (and never has) supported IRIX. A couple however relate to
the ksh_arrays option:
Test ./D05array.ztst failed: bad status 1, expected 0 from:
setopt ksh_arrays
echo .${foo[1,2]}.
unsetopt ksh_arrays
Error output:
ZTST_execchunk:2: subscript too big: 2303961
Was testing: Ksh array indexing
./D05array.ztst: test failed.
./D06subscript.ztst: starting.
./D06subscript.ztst: all tests successful.
./E01options.ztst: starting.
Test ./E01options.ztst failed: bad status 1, expected 0 from:
setopt ksh_arrays
array=(one two three)
print $array $array[2]
print ${array[0]} ${array[1]} ${array[2]} ${array[3]}
unsetopt ksh_arrays
print $array $array[2]
print ${array[0]} ${array[1]} ${array[2]} ${array[3]}
unset array
Error output:
ZTST_execchunk:2: subscript too big: 2303961
Was testing: KSH_ARRAYS option
./E01options.ztst: test failed.
I haven't worked out what is causing these. Basically, I get
inconsistent problems with arrays when ksh_arrays is set. Somewhere in
getarg(), r is acquiring the huge value. I'd suspect something like a
piece of memory being used doubly because it doesn't fail consistently.
Something as simple as `echo ${arr[1]}' can be enough to produce the
error but not always.
I've also altered the other three similar error messages because it was
producing error messages like:
zsh: big: subscript too big: 28384674
As if `big' and `small' were the names of builtins.
Oliver
Index: zshconfig.ac
===================================================================
RCS file: /cvsroot/zsh/zsh/zshconfig.ac,v
retrieving revision 1.2.2.7
diff -u -r1.2.2.7 zshconfig.ac
--- zshconfig.ac 2001/06/29 15:48:45 1.2.2.7
+++ zshconfig.ac 2001/07/02 11:14:19
@@ -1304,7 +1304,7 @@
if(pid < 0)
exit(1);
if(pid) {
- fd = open("/tmp/fifo$$", O_RDWR);
+ fd = open("/tmp/fifo$$", O_RDONLY);
exit(fd < 0 || read(fd, &c, 1) != 1 || c != 'x');
}
fd = open("/tmp/fifo$$", O_WRONLY);
Index: Src/compat.c
===================================================================
RCS file: /cvsroot/zsh/zsh/Src/compat.c,v
retrieving revision 1.9
diff -u -r1.9 compat.c
--- Src/compat.c 2000/09/18 14:22:48 1.9
+++ Src/compat.c 2001/07/02 11:14:19
@@ -184,7 +184,7 @@
((errno = 0), PATH_MAX - dirlen)));
#endif
}
-#endif // 0
+#endif /* 0 */
#ifdef HAVE_SYSCONF
/* This is replaced by a macro from system.h if not HAVE_SYSCONF. *
Index: Src/params.c
===================================================================
RCS file: /cvsroot/zsh/zsh/Src/params.c,v
retrieving revision 1.48
diff -u -r1.48 params.c
--- Src/params.c 2001/05/31 09:44:00 1.48
+++ Src/params.c 2001/07/02 11:14:19
@@ -1381,15 +1381,15 @@
return NULL;
}
if (v->start < -MAX_ARRLEN) {
- zerr("%s: subscript too %s: %d", "small", v->start);
+ zerr("subscript too %s: %d", "small", v->start);
return NULL;
}
if (v->end > MAX_ARRLEN+1) {
- zerr("%s: subscript too %s: %d", "big", v->end - !!isset(KSHARRAYS));
+ zerr("subscript too %s: %d", "big", v->end - !!isset(KSHARRAYS));
return NULL;
}
if (v->end < -MAX_ARRLEN) {
- zerr("%s: subscript too %s: %d", "small", v->end);
+ zerr("subscript too %s: %d", "small", v->end);
return NULL;
}
return v;
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: IRIX 5.3 specific problems
2001-07-02 11:18 IRIX 5.3 specific problems Oliver Kiddle
@ 2001-07-02 11:28 ` Andrej Borsenkow
2001-07-02 11:40 ` Oliver Kiddle
0 siblings, 1 reply; 3+ messages in thread
From: Andrej Borsenkow @ 2001-07-02 11:28 UTC (permalink / raw)
To: zsh-workers
>
> Running the tests produced a few failures. Most can be put down to zpty
> which doesn't (and never has) supported IRIX.
Is it current CVS? It is not supposed to fail in this case, but give a
wraning. Could you send output?
-andrej
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: IRIX 5.3 specific problems
2001-07-02 11:28 ` Andrej Borsenkow
@ 2001-07-02 11:40 ` Oliver Kiddle
0 siblings, 0 replies; 3+ messages in thread
From: Oliver Kiddle @ 2001-07-02 11:40 UTC (permalink / raw)
To: zsh-workers
Andrej Borsenkow wrote:
>
> Is it current CVS? It is not supposed to fail in this case, but give a
> wraning. Could you send output?
It was the 4.0 branch (from CVS on Friday) so your change for printing warnings wasn't there.
Oliver
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-07-02 11:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-07-02 11:18 IRIX 5.3 specific problems Oliver Kiddle
2001-07-02 11:28 ` Andrej Borsenkow
2001-07-02 11:40 ` Oliver Kiddle
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/zsh/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).