From: llua <llua@gmx.com>
To: zsh-workers@zsh.org
Subject: [PATCH 3/4] _btrfs: updated existing subcommands
Date: Tue, 18 Feb 2014 12:57:00 -0500 [thread overview]
Message-ID: <1392746221-1800-3-git-send-email-llua@gmx.com> (raw)
In-Reply-To: <1392746221-1800-1-git-send-email-llua@gmx.com>
From: Eric Cook <llua@gmx.com>
---
Completion/Linux/Command/_btrfs | 52 +++++++++++++++++++++++++++++++++--------
1 file changed, 42 insertions(+), 10 deletions(-)
diff --git a/Completion/Linux/Command/_btrfs b/Completion/Linux/Command/_btrfs
index 3db0578..88443e2 100644
--- a/Completion/Linux/Command/_btrfs
+++ b/Completion/Linux/Command/_btrfs
@@ -1,15 +1,22 @@
#compdef btrfs
local curcontext="$curcontext" curstate state line expl grp cmd ret=1
-local -a groups args cmds_1 cmds_2 cmds_3 cmds_4 cmds_5 cmds_6
+local -a cmds_1 cmds_2 cmds_3 cmds_4 cmds_5 cmds_6 cmds_7 cmds_8 cmds_9 cmds_10
+local -a groups args
-groups=( subvolume filesystem device scrub balance inspect-internal help version )
-cmds_1=( create delete list snapshot get-default set-default find-new help )
+groups=( subvolume filesystem device scrub balance inspect-internal
+ quota qgroup replace rescue check restore send receive
+ help version )
+cmds_1=( create delete list snapshot get-default set-default find-new show help )
cmds_2=( df show sync defragment resize label balance help )
-cmds_3=( add delete scan help )
+cmds_3=( add delete ready scan stats help )
cmds_4=( start cancel resume status help )
cmds_5=( start pause cancel resume status )
-cmds_6=( inode-resolve logical-resolve help )
+cmds_6=( inode-resolve logical-resolve subvolid-resolve rootid help )
+cmds_7=( enable disable rescan help )
+cmds_8=( assign remove create destroy show limit help )
+cmds_9=( start status cancel help )
+cmds_10=( chunk-recover super-recover )
[[ $words[2] = h(|e(|l(|p))) ]] && args=( '--full[display detailed help]' )
@@ -38,7 +45,7 @@ while (( $#state )); do
args)
: $words
local grp=${groups[(i)$words[1]*]}
- (( grp && grp < 7 )) || return 1
+ (( grp && grp <= 15 )) || return 1
local group=cmds_$grp
local cmd=${${(P)group}[(i)$words[2]*]}
(( cmd )) || return 1
@@ -60,11 +67,14 @@ while (( $#state )); do
subvolume:snapshot) args+=( '-r[readonly snapshot]' '1:snapshot:_files -/' );;
subvolume:list) args+=( '-p[include parent ID in output]' '1:path:->mounts' );;
subvolume:set-default) args+=( '1:id:_guard "[0-9]#" id' '2:path:->mounts' );;
+ subvolume:get-default) args+=( '1:path:_files -/' );;
+ subvolume:find-new) args+=( '1:subvol:_files -/' '2:lastgen: _message "last gen"' );;
filesystem:resize) args+=( '1:size:_guard "(|+|-)[0-9]#[GKM]"' '2:path:->mounts' );;
filesystem:defragment)
args+=(
'-v[verbose]'
'-c[compress files while defragmenting]'
+ '-r[defragment files recursively]'
'-f[flush after defragmenting]'
'-s[start position]:byte position'
'-l[defragment limited number of bytes]:length (bytes)'
@@ -73,18 +83,39 @@ while (( $#state )); do
)
;;
filesystem:label) args+=( '1:device:_files -g "*(d)"' '2:label' );;
- filesystem:show) args+=( '(1 -)--all-devices[scan all devices in /dev]' '1: :_guard "^-*" uuid or label' );;
- device:(add|delete)) args+=( '1:device:_files -g "*(d)"' '2:path:->mounts' );;
+ filesystem:show)
+ args+=(
+ '(1 -)'{-d,--all-devices}'[scan all devices in /dev]'
+ '(1 -)'{-m,--mounted}'[show only mounted filesystems]'
+ '1: :_guard "^-*" uuid or label'
+ )
+ ;;
+ device:(add|delete))
+ args+=(
+ '1:device:_files -g "*(d)"'
+ '2:path:->mounts'
+ )
+ [[ ${${(P)group}[cmd]} == add ]] &&
+ args+=(
+ {-K,--nodiscard}'[do not perform discard]'
+ {-f,--force}'[force overwrite of existing filesystem]'
+ )
+ ;;
device:scan) args+=( '(1 -)--all-devices[scan all devices in /dev]' '1:device:_files -g "*(d)"' );;
+ device:stats) args+=( "1:device or mountpoint:_files -g '*(d,/)'" '-z[reset stats when done]' );;
+ device:ready) args+=( '1:device: _files -g "*(d)"' );;
scrub:(start|resume))
args+=(
"-B[don't background and print statistics at end]"
'-d[print separate statistics for each device]'
'-q[omit error message and statistics]'
'-r[read only mode]'
- '-u[scrub unused space too]'
+ '-R[raw print mode]'
+ '-c[set ioprio class]:class:(( 0\:none 1\:realtime 2\:best-effort 3\:idle))'
+ '-n[set ioprio classdata]:classdata:(0 1 2 3 4 5 6 7)'
'1:path or device:_files'
)
+ [[ ${${(P)group}[cmd]} == start ]] && args+=( '-R[raw print mode]' )
;;
scrub:cancel) args+=( '1:path or device' );;
scrub:status) args+=( '-d[separate statistics for each device]' '1:path or device:_files' );;
@@ -105,6 +136,7 @@ while (( $#state )); do
args+=(
'-v[verbose mode]'
'-P[skip the path resolving and print the inodes instead]'
+ '-s[buffer size]:buffer size:'
'1:logical address:_files'
'2:filesystem path:_files -/'
)
@@ -136,7 +168,7 @@ while (( $#state )); do
;;
profiles)
compset -P '*\|'
- _values -s ',' profile raid0 raid1 raid10 dup single && ret=0
+ _values -s ',' profile raid0 raid1 raid5 raid6 raid10 dup single && ret=0
;;
esac
done
--
1.8.5.3
next prev parent reply other threads:[~2014-02-18 18:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-18 17:56 [PATCH 1/4] _btrfs: Removed inconsistent hardtabs llua
2014-02-18 17:56 ` [PATCH 2/4] _btrfs: fix minor typo llua
2014-02-18 17:57 ` llua [this message]
2014-02-18 17:57 ` [PATCH 3/4] _btrfs: updated existing subcommands llua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392746221-1800-3-git-send-email-llua@gmx.com \
--to=llua@gmx.com \
--cc=zsh-workers@zsh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/zsh/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).