From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 596 invoked from network); 30 Apr 2001 15:32:37 -0000 Received: from sunsite.dk (130.225.51.30) by ns1.primenet.com.au with SMTP; 30 Apr 2001 15:32:37 -0000 Received: (qmail 13439 invoked by alias); 30 Apr 2001 15:32:25 -0000 Mailing-List: contact zsh-workers-help@sunsite.dk; run by ezmlm Precedence: bulk X-No-Archive: yes X-Seq: 14163 Received: (qmail 13404 invoked from network); 30 Apr 2001 15:32:21 -0000 Message-Id: <200104301532.LAA27390@ursula.cortexmachina.com> To: zsh-workers@sunsite.dk Subject: Re: comptest* failed to load module: zsh/termcap In-Reply-To: Message from "Bart Schaefer" of "Sat, 28 Apr 2001 06:10:19 -0000." <1010428061019.ZM29944@candle.brasslantern.com> Date: Mon, 30 Apr 2001 11:32:10 -0400 From: Peter Whaite "Bart Schaefer" said: > On Apr 27, 3:54pm, Peter Whaite wrote: > } Subject: comptest* failed to load module: zsh/termcap > } > } > } Cvs last couple of days says after 'make test' > } > } ./Y01completion.ztst: starting. > } comptestinit:10: failed to load module: zsh/termcap > } comptestinit:echotc:10: autoload failed > } > } Is this OK? > > No, it's not OK. Standard question: > > Did you remove your config.cache and re-run ./Util/preconfig and configure > before compiling? There were a lot of changes to configure.in recently. I had tried that, except for the preconfig. Tried just now and still have the same problem. > If that doesn't seem to be the problem, let's have a look at your config.h > and config.modules after running configure. Included below. System is... % uname -a Linux ursula 2.4.2 #3 Tue Mar 13 08:51:29 EST 2001 i586 unknown --------- config.h /* config.h. Generated automatically by configure. */ /* config.h.in. Generated automatically from configure.in by autoheader. */ /***** begin user configuration section *****/ /* Define this to be the location of your password file */ #define PASSWD_FILE "/etc/passwd" /* Define this to be the name of your NIS/YP password * * map (if applicable) */ #define PASSWD_MAP "passwd.byname" /* Define to 1 if you want user names to be cached */ #define CACHE_USERNAMES 1 /* Define to 1 if system supports job control */ #define JOB_CONTROL 1 /* Define this if you use "suspended" instead of "stopped" */ #define USE_SUSPENDED 1 /* The default history buffer size in lines */ #define DEFAULT_HISTSIZE 30 /* The default editor for the fc builtin */ #define DEFAULT_FCEDIT "vi" /* The default prefix for temporary files */ #define DEFAULT_TMPPREFIX "/tmp/zsh" /***** end of user configuration section *****/ /***** shouldn't have to change anything below here *****/ /* Define if using alloca.c. */ /* #undef C_ALLOCA */ /* Define to empty if the keyword does not work. */ /* #undef const */ /* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. This function is required for alloca.c support on those systems. */ /* #undef CRAY_STACKSEG_END */ /* Define if the `getpgrp' function takes no argument. */ #define GETPGRP_VOID 1 /* Define to `int' if doesn't define. */ /* #undef gid_t */ /* Define if you have alloca, as a function or macro. */ #define HAVE_ALLOCA 1 /* Define if you have and it should be used (not on Ultrix). */ #define HAVE_ALLOCA_H 1 /* Define if you have a working `mmap' system call. */ #define HAVE_MMAP 1 /* Define if you have the strcoll function and it is properly defined. */ #define HAVE_STRCOLL 1 /* Define if you have that is POSIX.1 compatible. */ #define HAVE_SYS_WAIT_H 1 /* Define to `int' if doesn't define. */ /* #undef mode_t */ /* Define to `long' if doesn't define. */ /* #undef off_t */ /* Define to `int' if doesn't define. */ /* #undef pid_t */ /* Define as the return type of signal handlers (int or void). */ #define RETSIGTYPE void /* Define to `unsigned' if doesn't define. */ /* #undef size_t */ /* If using the C implementation of alloca, define if you know the direction of stack growth for your system; otherwise it will be automatically deduced at run-time. STACK_DIRECTION > 0 => grows toward higher addresses STACK_DIRECTION < 0 => grows toward lower addresses STACK_DIRECTION = 0 => direction of growth unknown */ /* #undef STACK_DIRECTION */ /* Define if the `S_IS*' macros in do not work properly. */ /* #undef STAT_MACROS_BROKEN */ /* Define if you have the ANSI C header files. */ #define STDC_HEADERS 1 /* Define if you can safely include both and . */ #define TIME_WITH_SYS_TIME 1 /* Define to `int' if doesn't define. */ /* #undef uid_t */ /* The global file to source absolutely first whenever zsh is run; * * if undefined, don't source anything */ #define GLOBAL_ZSHENV "/etc/zshenv" /* The global file to source whenever zsh is run; * * if undefined, don't source anything */ #define GLOBAL_ZSHRC "/etc/zshrc" /* The global file to source whenever zsh is run as a login shell; * * if undefined, don't source anything */ #define GLOBAL_ZLOGIN "/etc/zlogin" /* The global file to source whenever zsh is run as a login shell, * * before zshrc is read; if undefined, don't source anything */ #define GLOBAL_ZPROFILE "/etc/zprofile" /* The global file to source whenever zsh was run as a login shell. * * This is sourced right before exiting. If undefined, don't source * * anything */ #define GLOBAL_ZLOGOUT "/etc/zlogout" /* Define to 1 if compiler could initialise a union */ #define HAVE_UNION_INIT 1 /* Define to 1 if compiler incorrectly cast signed to unsigned */ /* #undef BROKEN_SIGNED_TO_UNSIGNED_CASTING */ /* Define to 1 if compiler supports variable-length arrays */ /* #undef HAVE_VARIABLE_LENGTH_ARRAYS */ /* Define if your system defines TIOCGWINSZ in sys/ioctl.h. */ #define GWINSZ_IN_SYS_IOCTL 1 /* Define to 1 if you have NIS */ /* #undef HAVE_NIS */ /* Define to 1 if you have NISPLUS */ /* #undef HAVE_NIS_PLUS */ /* Define to 1 if you have RFS superroot directory. */ /* #undef HAVE_SUPERROOT */ /* Define to 1 if you need to use the native getcwd */ /* #undef USE_GETCWD */ /* Define to the path of the /dev/fd filesystem */ #define PATH_DEV_FD "/proc/self/fd" /* Define if sys/time.h and sys/select.h cannot be both included */ /* #undef TIME_H_SELECT_H_CONFLICTS */ /* Define to be the machine type (microprocessor class or machine model) */ #define MACHTYPE "i586" /* Define to be the name of the operating system */ #define OSTYPE "linux-gnu" /* Define to 1 if ANSI function prototypes are usable. */ #define PROTOTYPES 1 /* Define to be location of utmp file. */ #define PATH_UTMP_FILE "/var/run/utmp" /* Define to be location of utmpx file. */ /* #undef PATH_UTMPX_FILE */ /* Define to be location of wtmp file. */ #define PATH_WTMP_FILE "/var/adm/wtmp" /* Define to be location of wtmpx file. */ /* #undef PATH_WTMPX_FILE */ /* Define to 1 if struct utmp is defined by a system header */ #define HAVE_STRUCT_UTMP 1 /* Define to 1 if struct utmpx is defined by a system header */ #define HAVE_STRUCT_UTMPX 1 /* Define if your system's struct utmp has a member named ut_host. */ #define HAVE_STRUCT_UTMP_UT_HOST 1 /* Define if your system's struct utmpx has a member named ut_host. */ #define HAVE_STRUCT_UTMPX_UT_HOST 1 /* Define if your system's struct utmpx has a member named ut_xtime. */ /* #undef HAVE_STRUCT_UTMPX_UT_XTIME */ /* Define if your system's struct utmpx has a member named ut_tv. */ #define HAVE_STRUCT_UTMPX_UT_TV 1 /* Define if your system's struct dirent has a member named d_ino. */ #define HAVE_STRUCT_DIRENT_D_INO 1 /* Define if your system's struct dirent has a member named d_stat. */ /* #undef HAVE_STRUCT_DIRENT_D_STAT */ /* Define if your system's struct direct has a member named d_ino. */ /* #undef HAVE_STRUCT_DIRECT_D_INO */ /* Define if your system's struct direct has a member named d_stat. */ /* #undef HAVE_STRUCT_DIRECT_D_STAT */ /* Define if your system's struct sockaddr_in6 has a member named sin6_scope_id. */ /* #undef HAVE_STRUCT_SOCKADDR_IN6_SIN6_SCOPE_ID */ /* Define to be a string corresponding the vendor of the machine */ #define VENDOR "pc" /* Define to limit job table size */ #define MAXJOB 50 /* #undef NEED_LINUX_TASKS_H */ /* Define if your system defines `struct winsize' in sys/ptem.h. */ /* #undef WINSIZE_IN_PTEM */ /* Define to 1 if you want to debug zsh */ /* #undef DEBUG */ /* Define to 1 if you want to use zsh's own memory allocation routines */ /* #undef ZSH_MEM */ /* Define to 1 if you want to debug zsh memory allocation routines */ /* #undef ZSH_MEM_DEBUG */ /* Define to 1 if you want to turn on warnings of memory allocation errors */ /* #undef ZSH_MEM_WARNING */ /* Define to 1 if you want to turn on memory checking for free() */ /* #undef ZSH_SECURE_FREE */ /* Define to 1 if you want to get debugging information on internal * * hash tables. This turns on the `hashinfo' builtin. */ /* #undef ZSH_HASH_DEBUG */ /* Undefine this if you don't want to get a restricted shell * * when zsh is exec'd with basename that starts with r. * * By default this is defined. */ #define RESTRICTED_R 1 /* Define for Maildir support */ /* #undef MAILDIR_SUPPORT */ /* Define for function depth limits */ /* #undef MAX_FUNCTION_DEPTH */ /* Define if you want locale features. By default this is defined. */ #define CONFIG_LOCALE 1 /* Define to 1 if your termcap library has the ospeed variable */ #define HAVE_OSPEED 1 /* Define to 1 if you have ospeed, but it is not defined in termcap.h */ /* #undef MUST_DEFINE_OSPEED */ /* Define to 1 if tgetent() accepts NULL as a buffer */ #define TGETENT_ACCEPTS_NULL 1 /* Define to 1 if you use POSIX style signal handling */ #define POSIX_SIGNALS 1 /* Define to 1 if you use BSD style signal handling (and can block signals) */ /* #undef BSD_SIGNALS */ /* Define to 1 if you use SYS style signal handling (and can block signals) */ /* #undef SYSV_SIGNALS */ /* Define to 1 if you have no signal blocking at all (bummer) */ /* #undef NO_SIGNAL_BLOCKING */ /* Define to `unsigned int' if or doesn't define */ /* #undef sigset_t */ /* Define to 1 if struct timezone is defined by a system header */ #define HAVE_STRUCT_TIMEZONE 1 /* Define to 1 if there is a prototype defined for brk() on your system */ #define HAVE_BRK_PROTO 1 /* Define to 1 if there is a prototype defined for sbrk() on your system */ #define HAVE_SBRK_PROTO 1 /* Define to 1 if there is a prototype defined for ioctl() on your system */ #define HAVE_IOCTL_PROTO 1 /* Define to 1 if there is a prototype defined for mknod() on your system */ #define HAVE_MKNOD_PROTO 1 /* Define to 1 if select() is defined in , ie BeOS R4.51*/ /* #undef SELECT_IN_SYS_SOCKET_H */ /* Define to 1 if system has working FIFO's */ #define HAVE_FIFOS 1 /* Define to 1 if struct rlimit uses quad_t */ #define RLIM_T_IS_QUAD_T 1 /* Define to 1 if struct rlimit uses long long */ /* #undef RLIM_T_IS_LONG_LONG */ /* Define to 1 if rlimit uses unsigned */ /* #undef RLIM_T_IS_UNSIGNED */ /* Define to the type used in struct rlimit */ /* #undef rlim_t */ /* Define to 1 if /bin/sh does not interpret \ escape sequences */ #define SH_USE_BSD_ECHO 1 /* Define to 1 if system has working link() */ #define HAVE_LINK 1 /* Define to 1 if kill(pid, 0) doesn't return ESRCH, ie BeOS R4.51 */ /* #undef BROKEN_KILL_ESRCH */ /* Define to 1 if sigsuspend() is broken, ie BeOS R4.51 */ /* #undef BROKEN_POSIX_SIGSUSPEND */ /* Define to 1 if getpwnam() is faked, ie BeOS R4.51 */ /* #undef GETPWNAM_FAKED */ /* Define to 1 if tcsetpgrp() doesn't work, ie BeOS R4.51 */ /* #undef BROKEN_TCSETPGRP */ /* Define to 1 if an underscore has to be prepended to dlsym() argument */ /* #undef DLSYM_NEEDS_UNDERSCORE */ /* Define to 1 if multiple modules defining the same symbol are OK */ #define DYNAMIC_NAME_CLASH_OK 1 /* The exension used for dynamically loaded modules */ #define DL_EXT "so" /* Define to 1 if you want to use dynamically loaded modules */ #define DYNAMIC 1 /* Define to 1 if you want to use dynamically loaded modules on AIX */ /* #undef AIXDYNAMIC */ /* Define to 1 if you want to use dynamically loaded modules on HPUX 10 */ /* #undef HPUXDYNAMIC */ /* Define to `unsigned long' if doesn't define. */ /* #undef ino_t */ /* * Definitions used when a long is less than eight byte, to try to * provide some support for eight byte operations. * * Note that ZSH_64_BIT_TYPE, OFF_T_IS_64_BIT, INO_T_IS_64_BIT do *not* get * defined if long is already 64 bits, since in that case no special handling * is required. */ /* Define to 1 if long is 64 bits */ /* #undef LONG_IS_64_BIT */ /* Define to a 64 bit integer type if there is one, but long is shorter */ #define ZSH_64_BIT_TYPE long long /* Define to an unsigned variant of ZSH_64_BIT_TYPE if that is defined */ #define ZSH_64_BIT_UTYPE unsigned long long /* Define to 1 if off_t is 64 bit (for large file support) */ #define OFF_T_IS_64_BIT 1 /* Define to 1 if ino_t is 64 bit (for large file support) */ /* #undef INO_T_IS_64_BIT */ /* Define to 1 if h_errno is not defined by the system */ /* #undef USE_LOCAL_H_ERRNO */ /* Define if you have the termcap boolcodes symbol. */ #define HAVE_BOOLCODES 1 /* Define if you have the termcap numcodes symbol. */ #define HAVE_NUMCODES 1 /* Define if you have the termcap strcodes symbol. */ #define HAVE_STRCODES 1 /* Define if you have the terminfo boolnames symbol. */ #define HAVE_BOOLNAMES 1 /* Define if you have the terminfo numnames symbol. */ #define HAVE_NUMNAMES 1 /* Define if you have the terminfo strnames symbol. */ #define HAVE_STRNAMES 1 /* Define if term.h chokes without curses.h */ /* #undef TERM_H_NEEDS_CURSES_H */ /* Define if you have the _mktemp function. */ /* #undef HAVE__MKTEMP */ /* Define if you have the brk function. */ #define HAVE_BRK 1 /* Define if you have the cap_get_proc function. */ /* #undef HAVE_CAP_GET_PROC */ /* Define if you have the difftime function. */ #define HAVE_DIFFTIME 1 /* Define if you have the dlclose function. */ #define HAVE_DLCLOSE 1 /* Define if you have the dlerror function. */ #define HAVE_DLERROR 1 /* Define if you have the dlopen function. */ #define HAVE_DLOPEN 1 /* Define if you have the dlsym function. */ #define HAVE_DLSYM 1 /* Define if you have the faccessx function. */ /* #undef HAVE_FACCESSX */ /* Define if you have the fchdir function. */ #define HAVE_FCHDIR 1 /* Define if you have the fseeko function. */ #define HAVE_FSEEKO 1 /* Define if you have the ftello function. */ #define HAVE_FTELLO 1 /* Define if you have the ftruncate function. */ #define HAVE_FTRUNCATE 1 /* Define if you have the getenv function. */ #define HAVE_GETENV 1 /* Define if you have the getgrgid function. */ #define HAVE_GETGRGID 1 /* Define if you have the getgrnam function. */ #define HAVE_GETGRNAM 1 /* Define if you have the gethostbyname2 function. */ #define HAVE_GETHOSTBYNAME2 1 /* Define if you have the gethostname function. */ #define HAVE_GETHOSTNAME 1 /* Define if you have the getipnodebyname function. */ /* #undef HAVE_GETIPNODEBYNAME */ /* Define if you have the getlogin function. */ #define HAVE_GETLOGIN 1 /* Define if you have the getpagesize function. */ #define HAVE_GETPAGESIZE 1 /* Define if you have the getpwent function. */ #define HAVE_GETPWENT 1 /* Define if you have the getpwnam function. */ #define HAVE_GETPWNAM 1 /* Define if you have the getpwuid function. */ #define HAVE_GETPWUID 1 /* Define if you have the getrlimit function. */ #define HAVE_GETRLIMIT 1 /* Define if you have the gettimeofday function. */ #define HAVE_GETTIMEOFDAY 1 /* Define if you have the inet_aton function. */ #define HAVE_INET_ATON 1 /* Define if you have the inet_ntop function. */ #define HAVE_INET_NTOP 1 /* Define if you have the inet_pton function. */ #define HAVE_INET_PTON 1 /* Define if you have the initgroups function. */ #define HAVE_INITGROUPS 1 /* Define if you have the killpg function. */ #define HAVE_KILLPG 1 /* Define if you have the lchown function. */ #define HAVE_LCHOWN 1 /* Define if you have the load function. */ /* #undef HAVE_LOAD */ /* Define if you have the loadbind function. */ /* #undef HAVE_LOADBIND */ /* Define if you have the loadquery function. */ /* #undef HAVE_LOADQUERY */ /* Define if you have the lstat function. */ #define HAVE_LSTAT 1 /* Define if you have the memcpy function. */ #define HAVE_MEMCPY 1 /* Define if you have the memmove function. */ #define HAVE_MEMMOVE 1 /* Define if you have the mkfifo function. */ #define HAVE_MKFIFO 1 /* Define if you have the msync function. */ #define HAVE_MSYNC 1 /* Define if you have the munmap function. */ #define HAVE_MUNMAP 1 /* Define if you have the nice function. */ #define HAVE_NICE 1 /* Define if you have the nis_list function. */ #define HAVE_NIS_LIST 1 /* Define if you have the pathconf function. */ #define HAVE_PATHCONF 1 /* Define if you have the poll function. */ #define HAVE_POLL 1 /* Define if you have the putenv function. */ #define HAVE_PUTENV 1 /* Define if you have the readlink function. */ #define HAVE_READLINK 1 /* Define if you have the sbrk function. */ #define HAVE_SBRK 1 /* Define if you have the select function. */ #define HAVE_SELECT 1 /* Define if you have the seteuid function. */ #define HAVE_SETEUID 1 /* Define if you have the setlocale function. */ #define HAVE_SETLOCALE 1 /* Define if you have the setpgid function. */ #define HAVE_SETPGID 1 /* Define if you have the setpgrp function. */ #define HAVE_SETPGRP 1 /* Define if you have the setresuid function. */ #define HAVE_SETRESUID 1 /* Define if you have the setreuid function. */ #define HAVE_SETREUID 1 /* Define if you have the setsid function. */ #define HAVE_SETSID 1 /* Define if you have the setuid function. */ #define HAVE_SETUID 1 /* Define if you have the setupterm function. */ /* #undef HAVE_SETUPTERM */ /* Define if you have the shl_findsym function. */ /* #undef HAVE_SHL_FINDSYM */ /* Define if you have the shl_load function. */ /* #undef HAVE_SHL_LOAD */ /* Define if you have the shl_unload function. */ /* #undef HAVE_SHL_UNLOAD */ /* Define if you have the sigaction function. */ #define HAVE_SIGACTION 1 /* Define if you have the sigblock function. */ #define HAVE_SIGBLOCK 1 /* Define if you have the sighold function. */ #define HAVE_SIGHOLD 1 /* Define if you have the signgam function. */ #define HAVE_SIGNGAM 1 /* Define if you have the sigprocmask function. */ #define HAVE_SIGPROCMASK 1 /* Define if you have the sigrelse function. */ #define HAVE_SIGRELSE 1 /* Define if you have the sigsetmask function. */ #define HAVE_SIGSETMASK 1 /* Define if you have the strerror function. */ #define HAVE_STRERROR 1 /* Define if you have the strftime function. */ #define HAVE_STRFTIME 1 /* Define if you have the strstr function. */ #define HAVE_STRSTR 1 /* Define if you have the sysconf function. */ #define HAVE_SYSCONF 1 /* Define if you have the tcgetattr function. */ #define HAVE_TCGETATTR 1 /* Define if you have the tcsetpgrp function. */ #define HAVE_TCSETPGRP 1 /* Define if you have the tgetent function. */ #define HAVE_TGETENT 1 /* Define if you have the tigetflag function. */ /* #undef HAVE_TIGETFLAG */ /* Define if you have the tigetnum function. */ /* #undef HAVE_TIGETNUM */ /* Define if you have the tigetstr function. */ /* #undef HAVE_TIGETSTR */ /* Define if you have the uname function. */ #define HAVE_UNAME 1 /* Define if you have the unload function. */ /* #undef HAVE_UNLOAD */ /* Define if you have the wait3 function. */ #define HAVE_WAIT3 1 /* Define if you have the waitpid function. */ #define HAVE_WAITPID 1 /* Define if you have the header file. */ #define HAVE_CURSES_H 1 /* Define if you have the header file. */ #define HAVE_DIRENT_H 1 /* Define if you have the header file. */ /* #undef HAVE_DL_H */ /* Define if you have the header file. */ #define HAVE_DLFCN_H 1 /* Define if you have the header file. */ #define HAVE_ERRNO_H 1 /* Define if you have the header file. */ #define HAVE_FCNTL_H 1 /* Define if you have the header file. */ #define HAVE_GRP_H 1 /* Define if you have the header file. */ /* #undef HAVE_LIBC_H */ /* Define if you have the header file. */ #define HAVE_LIMITS_H 1 /* Define if you have the header file. */ /* #undef HAVE_LINUX_TASKS_H */ /* Define if you have the header file. */ #define HAVE_LOCALE_H 1 /* Define if you have the header file. */ #define HAVE_MEMORY_H 1 /* Define if you have the header file. */ /* #undef HAVE_NDIR_H */ /* Define if you have the header file. */ /* #undef HAVE_NETINET_IN_SYSTM_H */ /* Define if you have the header file. */ #define HAVE_POLL_H 1 /* Define if you have the header file. */ #define HAVE_PWD_H 1 /* Define if you have the header file. */ #define HAVE_STDLIB_H 1 /* Define if you have the header file. */ #define HAVE_STRING_H 1 /* Define if you have the header file. */ /* #undef HAVE_SYS_CAPABILITY_H */ /* Define if you have the header file. */ /* #undef HAVE_SYS_DIR_H */ /* Define if you have the header file. */ /* #undef HAVE_SYS_FILIO_H */ /* Define if you have the header file. */ #define HAVE_SYS_MMAN_H 1 /* Define if you have the header file. */ /* #undef HAVE_SYS_NDIR_H */ /* Define if you have the header file. */ #define HAVE_SYS_PARAM_H 1 /* Define if you have the header file. */ #define HAVE_SYS_RESOURCE_H 1 /* Define if you have the header file. */ #define HAVE_SYS_SELECT_H 1 /* Define if you have the header file. */ #define HAVE_SYS_TIME_H 1 /* Define if you have the header file. */ #define HAVE_SYS_TIMES_H 1 /* Define if you have the header file. */ #define HAVE_SYS_TYPES_H 1 /* Define if you have the header file. */ #define HAVE_SYS_UTSNAME_H 1 /* Define if you have the header file. */ #define HAVE_TERM_H 1 /* Define if you have the header file. */ #define HAVE_TERMCAP_H 1 /* Define if you have the header file. */ #define HAVE_TERMIO_H 1 /* Define if you have the header file. */ #define HAVE_TERMIOS_H 1 /* Define if you have the header file. */ #define HAVE_UNISTD_H 1 /* Define if you have the header file. */ #define HAVE_UTMP_H 1 /* Define if you have the header file. */ #define HAVE_UTMPX_H 1 /* Define if you have the cap library (-lcap). */ /* #undef HAVE_LIBCAP */ /* Define if you have the dl library (-ldl). */ #define HAVE_LIBDL 1 /* Define if you have the m library (-lm). */ #define HAVE_LIBM 1 /* Define if you have the socket library (-lsocket). */ /* #undef HAVE_LIBSOCKET */ --------- config.modules # Edit this file to change the way modules are loaded. # The format is strict; do not break lines or add extra spaces. # Run `make prep' if you change anything here after compiling # (there is no need if you change this just after the first time # you run `configure'). # # Values of `link' are `static', `dynamic' or `no' to compile the # module into the shell, link it in at run time, or not use it at all. # In the final case, no attempt will be made to compile it. # Use `static' or `no' if you do not have dynamic loading. # # Values of `load' are `yes' or `no'; if yes, any builtins etc. # provided by the module will be autoloaded by the main shell # (so long as `link' is not set to `no'). # # Values of `auto' are `yes' or `no'. configure sets the value to # `yes'. If you set it by hand to `no', the line will be retained # when the file is regenerated in future. # # Note that the `functions' entry extends to the end of the line. # It should not be quoted; it is used verbatim to find files to install. # # You will need to run `config.status --recheck' if you add a new # module. # # You should not change the values for the pseudo-module zsh/main, # which is the main shell (apart from the functions entry). name=zsh/main modfile=Src/zsh.mdd link=static auto=yes load=yes functions=Functions/Misc/* Functions/Prompts/* name=zsh/rlimits modfile=Src/Builtins/rlimits.mdd link=dynamic auto=yes load=yes name=zsh/sched modfile=Src/Builtins/sched.mdd link=dynamic auto=yes load=yes name=zsh/cap modfile=Src/Modules/cap.mdd link=dynamic auto=yes load=no name=zsh/clone modfile=Src/Modules/clone.mdd link=dynamic auto=yes load=no name=zsh/example modfile=Src/Modules/example.mdd link=dynamic auto=yes load=no name=zsh/files modfile=Src/Modules/files.mdd link=dynamic auto=yes load=no name=zsh/mapfile modfile=Src/Modules/mapfile.mdd link=dynamic auto=yes load=no name=zsh/mathfunc modfile=Src/Modules/mathfunc.mdd link=dynamic auto=yes load=no name=zsh/parameter modfile=Src/Modules/parameter.mdd link=dynamic auto=yes load=yes name=zsh/stat modfile=Src/Modules/stat.mdd link=dynamic auto=yes load=no name=zsh/termcap modfile=Src/Modules/termcap.mdd link=dynamic auto=yes load=yes name=zsh/terminfo modfile=Src/Modules/terminfo.mdd link=dynamic auto=yes load=yes name=zsh/zftp modfile=Src/Modules/zftp.mdd link=dynamic auto=yes load=no functions=Functions/Zftp/* name=zsh/zprof modfile=Src/Modules/zprof.mdd link=dynamic auto=yes load=no name=zsh/zpty modfile=Src/Modules/zpty.mdd link=dynamic auto=yes load=no name=zsh/zutil modfile=Src/Modules/zutil.mdd link=dynamic auto=yes load=yes name=zsh/compctl modfile=Src/Zle/compctl.mdd link=dynamic auto=yes load=yes name=zsh/complete modfile=Src/Zle/complete.mdd link=dynamic auto=yes load=yes functions=Completion/comp* Completion/AIX/*/* Completion/BSD/*/* Completion/Base/*/* Completion/Debian/*/* Completion/Redhat/*/* Completion/Unix/*/* Completion/X/*/* Completion/Zsh/*/* name=zsh/complist modfile=Src/Zle/complist.mdd link=dynamic auto=yes load=yes name=zsh/computil modfile=Src/Zle/computil.mdd link=dynamic auto=yes load=yes name=zsh/deltochar modfile=Src/Zle/deltochar.mdd link=dynamic auto=yes load=no name=zsh/zle modfile=Src/Zle/zle.mdd link=dynamic auto=yes load=yes functions=Functions/Zle/* name=zsh/zleparameter modfile=Src/Zle/zleparameter.mdd link=dynamic auto=yes load=yes