* Compilation on IRIX 5.3
@ 2000-06-05 20:58 Oliver Kiddle
2000-06-05 23:38 ` Bart Schaefer
0 siblings, 1 reply; 3+ messages in thread
From: Oliver Kiddle @ 2000-06-05 20:58 UTC (permalink / raw)
To: Zsh workers
When compiling on IRIX 5.3, I get this:
Can't open -e
Can't open /^!MOD!)$/q;p
repeated several times. Wasn't this from one of the Solaris sed
fixes recently? If not, the last time I compiled Zsh on my Indigo
was 3.1.6-dev-21 so it is since then. I've stuck some more of
the output leading up to this on then end of this message.
Another thing which I've been meaning to look at for ages is that
I get the following repeatedly on an IRIX 5.3 build:
cfe: Warning 753: /usr/include/sys/types.h, line 111: declaration
must at least declare an identifier, tag, or the member of an
enumeration
typedef unsigned long unsigned long ;
^
cfe: Warning 645: /usr/include/sys/types.h, line 111: Duplicate 'unsigned'
typedef unsigned long unsigned long ;
------- ------------- ^
This has been around since about 3.1.5-dev-25 and was caused by
the long file support. I've also put the section of types.h on
the end of this message.
Despite these, Zsh does build successfully. I ran the tests an everything
passed until 53completion.ztst. It seems that zpty doesn't work but I
haven't got time to look at that at the moment. I've added a patch
though which just fixes the English in a few print statements in
comptest.
Oliver Kiddle
partial make output:
set '' Zsh/mod_cap.yo Zsh/mod_clone.yo Zsh/mod_compctl.yo Zsh/mod_complete.yo Zsh/mod_complist.yo Zsh/mod_computil.yo Zsh/mod_deltochar.yo Zsh/mod_example.yo Zsh/mod_files.yo Zsh/mod_mapfile.yo Zsh/mod_mathfunc.yo Zsh/mod_parameter.yo Zsh/mod_sched.yo Zsh/mod_stat.yo Zsh/mod_zftp.yo Zsh/mod_zle.yo Zsh/mod_zleparameter.yo Zsh/mod_zutil.yo Zsh/mod_zprof.yo Zsh/mod_zpty.yo; \
mod1= mod2= mod3=; \
test ".$2" = . || \
mod2=`sed -n '1{s|^COMMENT(!MOD!||;p;q;}' < ./$2`; \
while test ".$2" != .; do \
mod3=; \
test ".$3" = . || \
mod3=`sed -n '1{s|^COMMENT(!MOD!||;p;q;}' < ./$3`; \
echo "texinode(The $mod2 Module)(${mod3:+The $mod3 Module})(${mod1:+The $mod1 Module})(Zsh Modules)"; \
echo "sect(The $mod2 Module)"; \
echo "includefile(${2})`"; \
shift; \
mod1=$mod2; \
mod2=$mod3; \
done \
) > ./Zsh/modlist.yo
Can't open -e
Can't open /^!MOD!)$/q;p
Can't open -e
Can't open /^!MOD!)$/q;p
types.h (with line numbers added):
104 #if (_MIPS_SZLONG == 32)
105 typedef unsigned long mode_t; /* file attrs */
106 typedef unsigned long dev_t; /* device type */
107 typedef long uid_t;
108 typedef long gid_t;
109 typedef unsigned long nlink_t; /* used for link counts */
110 typedef long pid_t; /* proc & grp IDs */
111 typedef unsigned long ino_t; /* <inode> type */
112 #endif
113 #if (_MIPS_SZLONG == 64)
114 typedef __uint32_t mode_t; /* file attrs */
115 typedef __uint32_t dev_t; /* device type */
116 typedef __int32_t uid_t;
117 typedef __int32_t gid_t;
118 typedef __uint32_t nlink_t; /* used for link counts */
119 typedef __int32_t pid_t; /* proc & grp IDs */
120 typedef __uint32_t ino_t; /* <inode> type */
121 #endif
--- Test/comptest Sun May 21 19:01:00 2000
+++ Test/comptest Mon Jun 5 22:56:01 2000
@@ -19,7 +19,7 @@
zpty zsh "$comptest_zsh" -f
zpty -r zsh log1 "*<PROMPT>*" || {
- print "first prompt doesn't appered."
+ print "first prompt hasn't appeared."
return 1
}
@@ -75,7 +75,7 @@
print -lr - "$@" > $tmp
zpty -w zsh ". $tmp"
zpty -r zsh log_eval "*<PROMPT>*" || {
- print "prompt doesn't appered."
+ print "prompt hasn't appeared."
return 1
}
rm $tmp
@@ -85,7 +85,7 @@
input="$*"
zpty -n -w zsh "$input"$'\C-Z'
zpty -r zsh log "*<WIDGET><finish>*<PROMPT>*" || {
- print "finish widget doesn't invoked."
+ print "failed to invoke finish widget."
return 1
}
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Compilation on IRIX 5.3
2000-06-05 20:58 Compilation on IRIX 5.3 Oliver Kiddle
@ 2000-06-05 23:38 ` Bart Schaefer
2000-06-08 14:31 ` PATCH: " Oliver Kiddle
0 siblings, 1 reply; 3+ messages in thread
From: Bart Schaefer @ 2000-06-05 23:38 UTC (permalink / raw)
To: Zsh workers
On Jun 5, 9:58pm, Oliver Kiddle wrote:
> Subject: Compilation on IRIX 5.3
> When compiling on IRIX 5.3, I get this:
>
> Can't open -e
> Can't open /^!MOD!)$/q;p
>
> repeated several times. Wasn't this from one of the Solaris sed
> fixes recently?
Yes. It's in Doc/Makefile.in, so it's not critical to building the shell
itself. Thank goodness.
My only guess is that IRIX sed does not understand '-ne' and requires that
there be two options '-n -e' instead. Could you try that?
> cfe: Warning 753: /usr/include/sys/types.h, line 111: declaration
> must at least declare an identifier, tag, or the member of an
> enumeration
> typedef unsigned long unsigned long ;
> ^
> cfe: Warning 645: /usr/include/sys/types.h, line 111: Duplicate 'unsigned'
> typedef unsigned long unsigned long ;
> ------- ------------- ^
What does line 111 of sys/types.h look like?
Configure has `#define'd as `unsigned long' something that IRIX wanted to
`typedef' instead. We need to improve the configure test for that symbol,
whatever it is.
^ permalink raw reply [flat|nested] 3+ messages in thread
* PATCH: Re: Compilation on IRIX 5.3
2000-06-05 23:38 ` Bart Schaefer
@ 2000-06-08 14:31 ` Oliver Kiddle
0 siblings, 0 replies; 3+ messages in thread
From: Oliver Kiddle @ 2000-06-08 14:31 UTC (permalink / raw)
To: Zsh workers
Bart Schaefer wrote:
> >
> > Can't open -e
> > Can't open /^!MOD!)$/q;p
> My only guess is that IRIX sed does not understand '-ne' and requires that
> there be two options '-n -e' instead. Could you try that?
That was the problem. The IRIX sed does actually allow '-ne' as long as
there isn't another -e later on the line. The patch fixes our Makefile.
With the other problem with sys/types.h, I've been wasting your time
again so sorry about that. After removing certain entries from my
autoconf cache which were wrong, they were correctly determined when
rerunning configure so another program or older version of Zsh must have
got it wrong. I'll have to remember to try a clear cache before
reporting these build problems.
An unrelated point which I though I should mention is that if you run
the tests as root (which I did accidentally because I'd been root for
make install), you will get a failure for -r in the 07cond tests because
a file can be read as root even if the permissions are 000. I can't
think what the best way to deal with this is, maybe a check at the start
of the tests which displays a warning message.
I've also included a small change to _urls to use Sven's new -K option
to zparseopts. Is there a good reason why the -f options to _urls
completes files _first_ as opposed to together with URLs? I'd prefer to
be reminded by completion that urls would be valid in the current
context and anyone who likes the URLs first can always use a tag-order
style.
Oliver
Index: Completion/User/_urls
===================================================================
RCS file: /cvsroot/zsh/zsh/Completion/User/_urls,v
retrieving revision 1.12
diff -u -r1.12 _urls
--- Completion/User/_urls 2000/06/06 19:43:30 1.12
+++ Completion/User/_urls 2000/06/08 13:52:39
@@ -52,8 +52,8 @@
_wanted -C -f files expl file _files "$@" && return 0
fi
-zparseopts -D -E g:=glob
-: ${(A)=glob:=-g '*(^/)'}
+glob=(-g '*(^/)')
+zparseopts -D -K -E g:=glob
ipre="$IPREFIX"
Index: Doc/Makefile.in
===================================================================
RCS file: /cvsroot/zsh/zsh/Doc/Makefile.in,v
retrieving revision 1.3
diff -u -r1.3 Makefile.in
--- Doc/Makefile.in 2000/06/02 17:22:50 1.3
+++ Doc/Makefile.in 2000/06/08 13:52:39
@@ -193,7 +193,7 @@
( \
echo "startitem()"; \
for modfile in $(MODDOCSRC); do \
- sed -ne '1{s|^COMMENT(!MOD!\(.*\)$$|item(tt(\1))(|;p;d;}' \
+ sed -n -e '1{s|^COMMENT(!MOD!\(.*\)$$|item(tt(\1))(|;p;d;}' \
-e '/^!MOD!)$$/q;p' \
< $(sdir)/$$modfile; \
echo ")"; \
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2000-06-08 14:31 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-06-05 20:58 Compilation on IRIX 5.3 Oliver Kiddle
2000-06-05 23:38 ` Bart Schaefer
2000-06-08 14:31 ` PATCH: " Oliver Kiddle
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/zsh/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).