* RS6000AIX Zsh Executable Fails
@ 2000-11-29 23:04 Steve Amerige
2000-11-30 10:36 ` Peter Stephenson
2000-11-30 17:59 ` Steve Amerige
0 siblings, 2 replies; 3+ messages in thread
From: Steve Amerige @ 2000-11-29 23:04 UTC (permalink / raw)
To: zsh-workers
After building either the zsh-3.1.2 or the zsh-3.1.9 releases
for the rs6000aix platform, I try running zsh and get the
following message:
% zsh
exec(): 0509-036 Cannot load program ./zsh because of the following errors:
0509-118 The alignment of the .text section does not
satisfy its required alignment.
0509-194 Examine file headers with the 'dump -ohv' command.
%
I did as requested, but I don't know what the output means. I've
placed the results of this below. I built zsh as:
% ./configure
% make
I've tried running the zsh in the Src directory as well as
installing zsh via "make install" and running that. The error
message is the same. The platform is AIX 4.3 (rs6000aix).
The compiler used is gcc2.95 (I did try the native cc compiler
as well but that compiler didn't even compile the code cleanly).
Can you suggest what I should do to make zsh work?
Thanks,
Steve Amerige
Adobe Systems Incorporated
% dump -ohv zsh
zsh:
***Object Module Header***
# Sections Symbol Ptr # Symbols Opt Hdr Len Flags
5 0x00000000 0 72 0x120f
Flags=( RELFLG EXEC LNNO LSYMS AR32W DYNLOAD )
Timestamp = "Dec 31 16:00:00 1969"
Magic = 0x1df (32-bit XCOFF)
***Optional Header***
Tsize Dsize Bsize Tstart Dstart
0x000789e0 0x0000b308 0x00007d14 0x10000150 0x20000b13
SNloader SNentry SNtext SNtoc SNdata
0x0004 0x0002 0x0001 0x0002 0x0002
TXTalign DATAalign TOC vstamp entry
0x0005 0x0003 0x200076f8 0x0001 0x200064f0
maxSTACK maxDATA SNbss magic modtype
0x00000000 0x00000000 0x0003 0x0107 1L
***Section Header Information***
Section Header for .text
PHYaddr VTRaddr SCTsiz RAWptr RELptr
0x10000150 0x10000150 0x000789e0 0x00000140 0x00000000
LN#ptr #RELent #LINent Flags
0x00000000 0x0000 0x0000 0x00000020
Section Header for .data
PHYaddr VTRaddr SCTsiz RAWptr RELptr
0x20000b13 0x20000b13 0x0000b308 0x00078b20 0x00000000
LN#ptr #RELent #LINent Flags
0x00000000 0x0000 0x0000 0x00000040
Section Header for .bss
PHYaddr VTRaddr SCTsiz RAWptr RELptr
0x2000be18 0x2000be18 0x00007d14 0x00000000 0x00000000
LN#ptr #RELent #LINent Flags
0x00000000 0x0000 0x0000 0x00000080
Section Header for .loader
PHYaddr VTRaddr SCTsiz RAWptr RELptr
0x00000000 0x00000000 0x000176e0 0x00083e28 0x00000000
LN#ptr #RELent #LINent Flags
0x00000000 0x0000 0x0000 0x00001000
Section Header for .debug
PHYaddr VTRaddr SCTsiz RAWptr RELptr
0x00000000 0x00000000 0x00005880 0x0009b508 0x00000000
LN#ptr #RELent #LINent Flags
0x00000000 0x0000 0x0000 0x00002000
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: RS6000AIX Zsh Executable Fails
2000-11-29 23:04 RS6000AIX Zsh Executable Fails Steve Amerige
@ 2000-11-30 10:36 ` Peter Stephenson
2000-11-30 17:59 ` Steve Amerige
1 sibling, 0 replies; 3+ messages in thread
From: Peter Stephenson @ 2000-11-30 10:36 UTC (permalink / raw)
To: Steve Amerige, Zsh hackers list
> After building either the zsh-3.1.2 or the zsh-3.1.9 releases
> for the rs6000aix platform, I try running zsh and get the
> following message:
>
> % zsh
> exec(): 0509-036 Cannot load program ./zsh because of the following errors:
> 0509-118 The alignment of the .text section does not
> satisfy its required alignment.
> 0509-194 Examine file headers with the 'dump -ohv' command.
> %
Looks like a compiler problem. Are you sure the gcc you are using was
compiled on this (exact) OS version? Just because it works with other
programmes doesn't necessarily mean it was.
--
Peter Stephenson <pws@csr.com> Software Engineer
Cambridge Silicon Radio, Unit 300, Science Park, Milton Road,
Cambridge, CB4 0XL, UK Tel: +44 (0)1223 392070
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: RS6000AIX Zsh Executable Fails
2000-11-29 23:04 RS6000AIX Zsh Executable Fails Steve Amerige
2000-11-30 10:36 ` Peter Stephenson
@ 2000-11-30 17:59 ` Steve Amerige
1 sibling, 0 replies; 3+ messages in thread
From: Steve Amerige @ 2000-11-30 17:59 UTC (permalink / raw)
To: zsh-workers
Here's a followup note:
I built the zsh-3.0.8 release and it executed without error.
I'm not sure why the 3.1.2 and the 3.1.9 executables that I
built did not work. If there is any information that I can
pass on to you to help, please let me know; otherwise, I'll
stick with the 3.0.8 version for awhile!
Thanks,
Steve Amerige
Adobe Systems Incorporated
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2000-11-30 18:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-11-29 23:04 RS6000AIX Zsh Executable Fails Steve Amerige
2000-11-30 10:36 ` Peter Stephenson
2000-11-30 17:59 ` Steve Amerige
Code repositories for project(s) associated with this public inbox
https://git.vuxu.org/mirror/zsh/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).