texinode(Options)(Shell Builtin Commands)(Parameters)(Top) chapter(Options) cindex(options) startmenu() menu(Specifying Options) menu(Description of Options) menu(Option Aliases) menu(Single Letter Options) endmenu() texinode(Specifying Options)(Description of Options)()(Options) sect(Specifying Options) cindex(options, specifying) Options are primarily referred to by name. These names are case insensitive and underscores are ignored. For example, `tt(allexport)' is equivalent to `tt(A__lleXP_ort)'. The sense of an option name may be inverted by preceding it with `tt(no)', so `tt(setopt No_Beep)' is equivalent to `tt(unsetopt beep)'. This inversion can only be done once, so `tt(nonobeep)' is em(not) a synonym for `tt(beep)'. Similarly, `tt(tify)' is not a synonym for `tt(nonotify)' (the inversion of `tt(notify)'). Some options also have one or more single letter names. There are two sets of single letter options: one used by default, and another used to emulate bf(sh)/bf(ksh) (used when the tt(SH_OPTION_LETTERS) option is set). The single letter options can be used on the shell command line, or with the tt(set), tt(setopt) and tt(unsetopt) builtins, as normal Unix options preceded by `tt(-)'. The sense of the single letter options may be inverted by using `tt(PLUS())' instead of `tt(-)'. Some of the single letter option names refer to an option being off, in which case the inversion of that name refers to the option being on. For example, `tt(PLUS()n)' is the short name of `tt(exec)', and `tt(-n)' is the short name of its inversion, `tt(noexec)'. In strings of single letter options supplied to the shell at startup, trailing whitespace will be ignored; for example the string `tt(-f )' will be treated just as `tt(-f)', but the string `tt(-f i)' is an error. This is because many systems which implement the `tt(#!)' mechanism for calling scripts do not strip trailing whitespace. It is possible for options to be set within a function scope. See the description of the option tt(LOCAL_OPTIONS) below. texinode(Description of Options)(Option Aliases)(Specifying Options)(Options) sect(Description of Options) cindex(options, description) In the following list, options set by default in all emulations are marked ; those set by default only in csh, ksh, sh, or zsh emulations are marked , , , as appropriate. When listing options (by `tt(setopt)', `tt(unsetopt)', `tt(set -o)' or `tt(set +o)'), those turned on by default appear in the list prefixed with `tt(no)'. Hence (unless tt(KSH_OPTION_PRINT) is set), `tt(setopt)' shows all options whose settings are changed from the default. subsect(Changing Directories) startitem() pindex(AUTO_CD) pindex(NO_AUTO_CD) pindex(AUTOCD) pindex(NOAUTOCD) cindex(cd, automatic) item(tt(AUTO_CD) (tt(-J)))( If a command is issued that can't be executed as a normal command, and the command is the name of a directory, perform the tt(cd) command to that directory. This option is only applicable if the option tt(SHIN_STDIN) is set, i.e. if commands are being read from standard input. The option is designed for interactive use; it is recommended that tt(cd) be used explicitly in scripts to avoid ambiguity. ) pindex(AUTO_PUSHD) pindex(NO_AUTO_PUSHD) pindex(AUTOPUSHD) pindex(NOAUTOPUSHD) cindex(cd, behaving like pushd) cindex(pushd, making cd behave like) item(tt(AUTO_PUSHD) (tt(-N)))( Make tt(cd) push the old directory onto the directory stack. ) pindex(CDABLE_VARS) pindex(NO_CDABLE_VARS) pindex(CDABLEVARS) pindex(NOCDABLEVARS) cindex(cd, to parameter) item(tt(CDABLE_VARS) (tt(-T)))( If the argument to a tt(cd) command (or an implied tt(cd) with the tt(AUTO_CD) option set) is not a directory, and does not begin with a slash, try to expand the expression as if it were preceded by a `tt(~)' (see noderef(Filename Expansion)). ) pindex(CD_SILENT) pindex(NO_CD_SILENT) pindex(CDSILENT) pindex(NOCDSILENT) cindex(cd, silencing) cindex(autocd, silencing) item(tt(CD_SILENT))( Never print the working directory after a tt(cd) (whether explicit or implied with the tt(AUTO_CD) option set). tt(cd) normally prints the working directory when the argument given to it was tt(-), a stack entry, or the name of a directory found under tt(CDPATH). Note that this is distinct from tt(pushd)'s stack-printing behaviour, which is controlled by tt(PUSHD_SILENT). This option overrides the printing-related effects of tt(POSIX_CD). ) pindex(CHASE_DOTS) pindex(NO_CHASE_DOTS) pindex(CHASEDOTS) pindex(NOCHASEDOTS) cindex(cd, with .. in argument) item(tt(CHASE_DOTS))( When changing to a directory containing a path segment `tt(..)' which would otherwise be treated as canceling the previous segment in the path (in other words, `tt(foo/..)' would be removed from the path, or if `tt(..)' is the first part of the path, the last part of the current working directory would be removed), instead resolve the path to the physical directory. This option is overridden by tt(CHASE_LINKS). For example, suppose tt(/foo/bar) is a link to the directory tt(/alt/rod). Without this option set, `tt(cd /foo/bar/..)' changes to tt(/foo); with it set, it changes to tt(/alt). The same applies if the current directory is tt(/foo/bar) and `tt(cd ..)' is used. Note that all other symbolic links in the path will also be resolved. ) pindex(CHASE_LINKS) pindex(NO_CHASE_LINKS) pindex(CHASELINKS) pindex(NOCHASELINKS) cindex(links, symbolic) cindex(symbolic links) item(tt(CHASE_LINKS) (tt(-w)))( Resolve symbolic links to their true values when changing directory. This also has the effect of tt(CHASE_DOTS), i.e. a `tt(..)' path segment will be treated as referring to the physical parent, even if the preceding path segment is a symbolic link. ) pindex(POSIX_CD) pindex(POSIXCD) pindex(NO_POSIX_CD) pindex(NOPOSIXCD) cindex(CDPATH, order of checking) item(tt(POSIX_CD) )( Modifies the behaviour of tt(cd), tt(chdir) and tt(pushd) commands to make them more compatible with the POSIX standard. The behaviour with the option unset is described in the documentation for the tt(cd) builtin in ifzman(zmanref(zshbuiltins))\ ifnzman(noderef(Shell Builtin Commands)). If the option is set, the shell does not test for directories beneath the local directory (`tt(.)') until after all directories in tt(cdpath) have been tested, and the tt(cd) and tt(chdir) commands do not recognise arguments of the form `{tt(PLUS())|tt(-)}var(n)' as directory stack entries. Also, if the option is set, the conditions under which the shell prints the new directory after changing to it are modified. It is no longer restricted to interactive shells (although printing of the directory stack with tt(pushd) is still limited to interactive shells); and any use of a component of tt(CDPATH), including a `tt(.)' but excluding an empty component that is otherwise treated as `tt(.)', causes the directory to be printed. ) pindex(PUSHD_IGNORE_DUPS) pindex(NO_PUSHD_IGNORE_DUPS) pindex(PUSHDIGNOREDUPS) pindex(NOPUSHDIGNOREDUPS) cindex(directory stack, ignoring duplicates) item(tt(PUSHD_IGNORE_DUPS))( Don't push multiple copies of the same directory onto the directory stack. ) pindex(PUSHD_MINUS) pindex(NO_PUSHD_MINUS) pindex(PUSHDMINUS) pindex(NOPUSHDMINUS) cindex(directory stack, controlling syntax) item(tt(PUSHD_MINUS))( Exchanges the meanings of `tt(PLUS())' and `tt(-)' when used with a number to specify a directory in the stack. ) pindex(PUSHD_SILENT) pindex(NO_PUSHD_SILENT) pindex(PUSHDSILENT) pindex(NOPUSHDSILENT) cindex(directory stack, silencing) item(tt(PUSHD_SILENT) (tt(-E)))( Do not print the directory stack after tt(pushd) or tt(popd). ) pindex(PUSHD_TO_HOME) pindex(NO_PUSHD_TO_HOME) pindex(PUSHDTOHOME) pindex(NOPUSHDTOHOME) cindex(pushd, to home) item(tt(PUSHD_TO_HOME) (tt(-D)))( Have tt(pushd) with no arguments act like `tt(pushd $HOME)'. ) enditem() subsect(Completion) startitem() pindex(ALWAYS_LAST_PROMPT) pindex(NO_ALWAYS_LAST_PROMPT) pindex(ALWAYSLASTPROMPT) pindex(NOALWAYSLASTPROMPT) item(tt(ALWAYS_LAST_PROMPT) )( If unset, key functions that list completions try to return to the last prompt if given a numeric argument. If set these functions try to return to the last prompt if given em(no) numeric argument. ) pindex(ALWAYS_TO_END) pindex(NO_ALWAYS_TO_END) pindex(ALWAYSTOEND) pindex(NOALWAYSTOEND) item(tt(ALWAYS_TO_END))( If a completion is performed with the cursor within a word, and a full completion is inserted, the cursor is moved to the end of the word. That is, the cursor is moved to the end of the word if either a single match is inserted or menu completion is performed. ) pindex(AUTO_LIST) pindex(NO_AUTO_LIST) pindex(AUTOLIST) pindex(NOAUTOLIST) cindex(completion, listing choices) item(tt(AUTO_LIST) (tt(-9)) )( Automatically list choices on an ambiguous completion. ) pindex(AUTO_MENU) pindex(NO_AUTO_MENU) pindex(AUTOMENU) pindex(NOAUTOMENU) cindex(completion, menu) item(tt(AUTO_MENU) )( Automatically use menu completion after the second consecutive request for completion, for example by pressing the tab key repeatedly. This option is overridden by tt(MENU_COMPLETE). ) pindex(AUTO_NAME_DIRS) pindex(NO_AUTO_NAME_DIRS) pindex(AUTONAMEDIRS) pindex(NOAUTONAMEDIRS) cindex(directories, named) item(tt(AUTO_NAME_DIRS))( Any parameter that is set to the absolute name of a directory immediately becomes a name for that directory, that will be used by the `tt(%~)' and related prompt sequences, and will be available when completion is performed on a word starting with `tt(~)'. (Otherwise, the parameter must be used in the form `tt(~)var(param)' first.) ) pindex(AUTO_PARAM_KEYS) pindex(NO_AUTO_PARAM_KEYS) pindex(AUTOPARAMKEYS) pindex(NOAUTOPARAMKEYS) item(tt(AUTO_PARAM_KEYS) )( If a parameter name was completed and a following character (normally a space) automatically inserted, and the next character typed is one of those that have to come directly after the name (like `tt(})', `tt(:)', etc.), the automatically added character is deleted, so that the character typed comes immediately after the parameter name. Completion in a brace expansion is affected similarly: the added character is a `tt(,)', which will be removed if `tt(})' is typed next. ) pindex(AUTO_PARAM_SLASH) pindex(NO_AUTO_PARAM_SLASH) pindex(AUTOPARAMSLASH) pindex(NOAUTOPARAMSLASH) item(tt(AUTO_PARAM_SLASH) )( If a parameter is completed whose content is the name of a directory, then add a trailing slash instead of a space. ) pindex(AUTO_REMOVE_SLASH) pindex(NO_AUTO_REMOVE_SLASH) pindex(AUTOREMOVESLASH) pindex(NOAUTOREMOVESLASH) cindex(slash, removing trailing) item(tt(AUTO_REMOVE_SLASH) )( When the last character resulting from a completion is a slash and the next character typed is a word delimiter, a slash, or a character that ends a command (such as a semicolon or an ampersand), remove the slash. ) pindex(BASH_AUTO_LIST) pindex(NO_BASH_AUTO_LIST) pindex(BASHAUTOLIST) pindex(NOBASHAUTOLIST) cindex(completion, listing choices, bash style) item(tt(BASH_AUTO_LIST))( On an ambiguous completion, automatically list choices when the completion function is called twice in succession. This takes precedence over tt(AUTO_LIST). The setting of tt(LIST_AMBIGUOUS) is respected. If tt(AUTO_MENU) is set, the menu behaviour will then start with the third press. Note that this will not work with tt(MENU_COMPLETE), since repeated completion calls immediately cycle through the list in that case. ) pindex(COMPLETE_ALIASES) pindex(NO_COMPLETE_ALIASES) pindex(COMPLETEALIASES) pindex(NOCOMPLETEALIASES) cindex(aliases, completion of) item(tt(COMPLETE_ALIASES))( Prevents aliases on the command line from being internally substituted before completion is attempted. The effect is to make the alias a distinct command for completion purposes. ) pindex(COMPLETE_IN_WORD) pindex(NO_COMPLETE_IN_WORD) pindex(COMPLETEINWORD) pindex(NOCOMPLETEINWORD) item(tt(COMPLETE_IN_WORD))( If unset, the cursor is set to the end of the word if completion is started. Otherwise it stays there and completion is done from both ends. ) pindex(GLOB_COMPLETE) pindex(NO_GLOB_COMPLETE) pindex(GLOBCOMPLETE) pindex(NOGLOBCOMPLETE) item(tt(GLOB_COMPLETE))( When the current word has a glob pattern, do not insert all the words resulting from the expansion but generate matches as for completion and cycle through them like tt(MENU_COMPLETE). The matches are generated as if a `tt(*)' was added to the end of the word, or inserted at the cursor when tt(COMPLETE_IN_WORD) is set. This actually uses pattern matching, not globbing, so it works not only for files but for any completion, such as options, user names, etc. Note that when the pattern matcher is used, matching control (for example, case-insensitive or anchored matching) cannot be used. This limitation only applies when the current word contains a pattern; simply turning on the tt(GLOB_COMPLETE) option does not have this effect. ) pindex(HASH_LIST_ALL) pindex(NO_HASH_LIST_ALL) pindex(HASHLISTALL) pindex(NOHASHLISTALL) item(tt(HASH_LIST_ALL) )( Whenever a command completion or spelling correction is attempted, make sure the entire command path is hashed first. This makes the first completion slower but avoids false reports of spelling errors. ) pindex(LIST_AMBIGUOUS) pindex(NO_LIST_AMBIGUOUS) pindex(LISTAMBIGUOUS) pindex(NOLISTAMBIGUOUS) cindex(ambiguous completion) cindex(completion, ambiguous) item(tt(LIST_AMBIGUOUS) )( This option works when tt(AUTO_LIST) or tt(BASH_AUTO_LIST) is also set. If there is an unambiguous prefix to insert on the command line, that is done without a completion list being displayed; in other words, auto-listing behaviour only takes place when nothing would be inserted. In the case of tt(BASH_AUTO_LIST), this means that the list will be delayed to the third call of the function. ) pindex(LIST_BEEP) pindex(NO_LIST_BEEP) pindex(LISTBEEP) pindex(NOLISTBEEP) cindex(beep, ambiguous completion) cindex(completion, beep on ambiguous) item(tt(LIST_BEEP) )( Beep on an ambiguous completion. More accurately, this forces the completion widgets to return status 1 on an ambiguous completion, which causes the shell to beep if the option tt(BEEP) is also set; this may be modified if completion is called from a user-defined widget. ) pindex(LIST_PACKED) pindex(NO_LIST_PACKED) pindex(LISTPACKED) pindex(NOLISTPACKED) cindex(completion, listing) item(tt(LIST_PACKED))( Try to make the completion list smaller (occupying less lines) by printing the matches in columns with different widths. ) pindex(LIST_ROWS_FIRST) pindex(NO_LIST_ROWS_FIRST) pindex(LISTROWSFIRST) pindex(NOLISTROWSFIRST) cindex(completion, listing order) item(tt(LIST_ROWS_FIRST))( Lay out the matches in completion lists sorted horizontally, that is, the second match is to the right of the first one, not under it as usual. ) pindex(LIST_TYPES) pindex(NO_LIST_TYPES) pindex(LISTTYPES) pindex(NOLISTTYPES) cindex(marking file types) cindex(files, marking type of) item(tt(LIST_TYPES) (tt(-X)) )( When listing files that are possible completions, show the type of each file with a trailing identifying mark. ) pindex(MENU_COMPLETE) pindex(NO_MENU_COMPLETE) pindex(MENUCOMPLETE) pindex(NOMENUCOMPLETE) cindex(completion, menu) item(tt(MENU_COMPLETE) (tt(-Y)))( On an ambiguous completion, instead of listing possibilities or beeping, insert the first match immediately. Then when completion is requested again, remove the first match and insert the second match, etc. When there are no more matches, go back to the first one again. tt(reverse-menu-complete) may be used to loop through the list in the other direction. This option overrides tt(AUTO_MENU). ) pindex(REC_EXACT) pindex(NO_REC_EXACT) pindex(RECEXACT) pindex(NORECEXACT) cindex(completion, exact matches) item(tt(REC_EXACT) (tt(-S)))( If the string on the command line exactly matches one of the possible completions, it is accepted, even if there is another completion (i.e. that string with something else added) that also matches. ) enditem() subsect(Expansion and Globbing) startitem() pindex(BAD_PATTERN) pindex(NO_BAD_PATTERN) pindex(BADPATTERN) pindex(NOBADPATTERN) cindex(globbing, bad pattern) cindex(filename generation, bad pattern) item(tt(BAD_PATTERN) (tt(PLUS()2)) )( If a pattern for filename generation is badly formed, print an error message. (If this option is unset, the pattern will be left unchanged.) ) pindex(BARE_GLOB_QUAL) pindex(NO_BARE_GLOB_QUAL) pindex(BAREGLOBQUAL) pindex(NOBAREGLOBQUAL) cindex(globbing qualifiers, enable) cindex(enable globbing qualifiers) item(tt(BARE_GLOB_QUAL) )( In a glob pattern, treat a trailing set of parentheses as a qualifier list, if it contains no `tt(|)', `tt(LPAR())' or (if special) `tt(~)' characters. See noderef(Filename Generation). ) pindex(BRACE_CCL) pindex(NO_BRACE_CCL) pindex(BRACECCL) pindex(NOBRACECCL) cindex(brace expansion, extending) cindex(expansion, brace, extending) item(tt(BRACE_CCL))( Expand expressions in braces which would not otherwise undergo brace expansion to a lexically ordered list of all the characters. See noderef(Brace Expansion). ) pindex(CASE_GLOB) pindex(NO_CASE_GLOB) pindex(CASEGLOB) pindex(NOCASEGLOB) cindex(case-insensitive globbing, option) item(tt(CASE_GLOB) )( Make globbing (filename generation) sensitive to case. Note that other uses of patterns are always sensitive to case. If the option is unset, the presence of any character which is special to filename generation will cause case-insensitive matching. For example, tt(cvs+LPAR()/+RPAR()) can match the directory tt(CVS) owing to the presence of the globbing flag (unless the option tt(BARE_GLOB_QUAL) is unset). ) pindex(CASE_MATCH) pindex(NO_CASE_MATCH) pindex(CASEMATCH) pindex(NOCASEMATCH) cindex(case-insensitive regular expression matches, option) cindex(regular expressions, case-insensitive matching, option) item(tt(CASE_MATCH) )( Make regular expressions using the tt(zsh/regex) module (including matches with tt(=~)) sensitive to case. ) pindex(CASE_PATHS) pindex(NO_CASE_PATHS) pindex(CASEPATHS) pindex(NOCASEPATHS) cindex(case-sensitive globbing, option) item(tt(CASE_PATHS))( If tt(CASE_PATHS) is not set (the default), tt(CASE_GLOB) affects the interpretation of em(every) path component, whenever a special character appears in em(any) component. When tt(CASE_PATHS) is set, file path components that do em(not) contain special filename generation characters are always sensitive to case, thus restricting tt(NO_CASE_GLOB) to components that contain globbing characters. Note that if the filesystem itself is not sensitive to case, then tt(CASE_PATHS) has no effect. ) pindex(CSH_NULL_GLOB) pindex(NO_CSH_NULL_GLOB) pindex(CSHNULLGLOB) pindex(NOCSHNULLGLOB) cindex(csh, null globbing style) cindex(null globbing style, csh) cindex(globbing, null, style, csh) item(tt(CSH_NULL_GLOB) )( If a pattern for filename generation has no matches, delete the pattern from the argument list; do not report an error unless all the patterns in a command have no matches. Overrides tt(NOMATCH). ) pindex(EQUALS) pindex(NO_EQUALS) pindex(NOEQUALS) cindex(filename expansion, =) item(tt(EQUALS) )( Perform tt(=) filename expansion. (See noderef(Filename Expansion).) ) pindex(EXTENDED_GLOB) pindex(NO_EXTENDED_GLOB) pindex(EXTENDEDGLOB) pindex(NOEXTENDEDGLOB) cindex(globbing, extended) item(tt(EXTENDED_GLOB))( Treat the `tt(#)', `tt(~)' and `tt(^)' characters as part of patterns for filename generation, etc. (An initial unquoted `tt(~)' always produces named directory expansion.) ) pindex(FORCE_FLOAT) pindex(NO_FORCE_FLOAT) pindex(FORCEFLOAT) pindex(NOFORCEFLOAT) cindex(floating point, forcing use of) cindex(forcing use of floating point) item(tt(FORCE_FLOAT))( Constants in arithmetic evaluation will be treated as floating point even without the use of a decimal point; the values of integer variables will be converted to floating point when used in arithmetic expressions. Integers in any base will be converted. ) pindex(GLOB) pindex(NO_GLOB) pindex(NOGLOB) cindex(globbing, enabling) cindex(enabling globbing) item(tt(GLOB) (tt(PLUS()F), ksh: tt(PLUS()f)) )( Perform filename generation (globbing). (See noderef(Filename Generation).) ) pindex(GLOB_ASSIGN) pindex(NO_GLOB_ASSIGN) pindex(GLOBASSIGN) pindex(NOGLOBASSIGN) item(tt(GLOB_ASSIGN) )( If this option is set, filename generation (globbing) is performed on the right hand side of scalar parameter assignments of the form `var(name)tt(=)var(pattern) (e.g. `tt(foo=*)'). If the result has more than one word the parameter will become an array with those words as arguments. This option is provided for backwards compatibility only: globbing is always performed on the right hand side of array assignments of the form `var(name)tt(=LPAR())var(value)tt(RPAR())' (e.g. `tt(foo=(*))') and this form is recommended for clarity; with this option set, it is not possible to predict whether the result will be an array or a scalar. ) pindex(GLOB_DOTS) pindex(NO_GLOB_DOTS) pindex(GLOBDOTS) pindex(NOGLOBDOTS) cindex(globbing, of . files) item(tt(GLOB_DOTS) (tt(-4)))( Do not require a leading `tt(.)' in a filename to be matched explicitly. ) pindex(GLOB_STAR_SHORT) pindex(NO_GLOB_STAR_SHORT) pindex(GLOBSTARSHORT) pindex(NOGLOBSTARSHORT) cindex(globbing, short forms) cindex(globbing, ** special) item(tt(GLOB_STAR_SHORT))( When this option is set and the default zsh-style globbing is in effect, the pattern `tt(**/*)' can be abbreviated to `tt(**)' and the pattern `tt(***/*)' can be abbreviated to tt(***). Hence `tt(**.c)' finds a file ending in tt(.c) in any subdirectory, and `tt(***.c)' does the same while also following symbolic links. A tt(/) immediately after the `tt(**)' or `tt(***)' forces the pattern to be treated as the unabbreviated form. ) pindex(GLOB_SUBST) pindex(NO_GLOB_SUBST) pindex(GLOBSUBST) pindex(NOGLOBSUBST) item(tt(GLOB_SUBST) )( Treat any characters resulting from parameter expansion as being eligible for filename expansion and filename generation, and any characters resulting from command substitution as being eligible for filename generation. Braces (and commas in between) do not become eligible for expansion. ) pindex(HIST_SUBST_PATTERN) pindex(NO_HIST_SUBST_PATTERN) pindex(HISTSUBSTPATTERN) pindex(NOHISTSUBSTPATTERN) item(tt(HIST_SUBST_PATTERN))( Substitutions using the tt(:s) and tt(:&) history modifiers are performed with pattern matching instead of string matching. This occurs wherever history modifiers are valid, including glob qualifiers and parameters. See ifzman(the section `Modifiers' in zmanref(zshexpn))\ ifnzman(noderef(Modifiers)). ) pindex(IGNORE_BRACES) pindex(NO_IGNORE_BRACES) pindex(IGNOREBRACES) pindex(NOIGNOREBRACES) cindex(disabling brace expansion) cindex(brace expansion, disabling) cindex(expansion, brace, disabling) item(tt(IGNORE_BRACES) (tt(-I)) )( Do not perform brace expansion. For historical reasons this also includes the effect of the tt(IGNORE_CLOSE_BRACES) option. ) pindex(IGNORE_CLOSE_BRACES) pindex(NO_IGNORE_CLOSE_BRACES) pindex(IGNORECLOSEBRACES) pindex(NOIGNORECLOSEBRACES) item(tt(IGNORE_CLOSE_BRACES))( When neither this option nor tt(IGNORE_BRACES) is set, a sole close brace character `tt(})' is syntactically significant at any point on a command line. This has the effect that no semicolon or newline is necessary before the brace terminating a function or current shell construct. When either option is set, a closing brace is syntactically significant only in command position. Unlike tt(IGNORE_BRACES), this option does not disable brace expansion. For example, with both options unset a function may be defined in the following fashion: example(args+LPAR()RPAR() { echo $# }) while if either option is set, this does not work and something equivalent to the following is required: example(args+LPAR()RPAR() { echo $#; }) ) pindex(KSH_GLOB) pindex(NO_KSH_GLOB) pindex(KSHGLOB) pindex(NOKSHGLOB) item(tt(KSH_GLOB) )( In pattern matching, the interpretation of parentheses is affected by a preceding `tt(@)', `tt(*)', `tt(+)', `tt(?)' or `tt(!)'. See noderef(Filename Generation). ) pindex(MAGIC_EQUAL_SUBST) pindex(NO_MAGIC_EQUAL_SUBST) pindex(MAGICEQUALSUBST) pindex(NOMAGICEQUALSUBST) item(tt(MAGIC_EQUAL_SUBST))( All unquoted arguments of the form `var(anything)tt(=)var(expression)' appearing after the command name have filename expansion (that is, where var(expression) has a leading `tt(~)' or `tt(=)') performed on var(expression) as if it were a parameter assignment. The argument is not otherwise treated specially; it is passed to the command as a single argument, and not used as an actual parameter assignment. For example, in tt(echo foo=~/bar:~/rod), both occurrences of tt(~) would be replaced. Note that this happens anyway with tt(typeset) and similar statements. This option respects the setting of the tt(KSH_TYPESET) option. In other words, if both options are in effect, arguments looking like assignments will not undergo word splitting. ) pindex(MARK_DIRS) pindex(NO_MARK_DIRS) pindex(MARKDIRS) pindex(NOMARKDIRS) cindex(directories, marking) cindex(marking directories) item(tt(MARK_DIRS) (tt(-8), ksh: tt(-X)))( Append a trailing `tt(/)' to all directory names resulting from filename generation (globbing). ) pindex(MULTIBYTE) pindex(NO_MULTIBYTE) pindex(NOMULTIBYTE) cindex(characters, multibyte, in expansion and globbing) cindex(multibyte characters, in expansion and globbing) item(tt(MULTIBYTE) )( Respect multibyte characters when found in strings. When this option is set, strings are examined using the system library to determine how many bytes form a character, depending on the current locale. This affects the way characters are counted in pattern matching, parameter values and various delimiters. The option is on by default if the shell was compiled with tt(MULTIBYTE_SUPPORT); otherwise it is off by default and has no effect if turned on. If the option is off a single byte is always treated as a single character. This setting is designed purely for examining strings known to contain raw bytes or other values that may not be characters in the current locale. It is not necessary to unset the option merely because the character set for the current locale does not contain multibyte characters. The option does not affect the shell's editor, which always uses the locale to determine multibyte characters. This is because the character set displayed by the terminal emulator is independent of shell settings. ) pindex(NOMATCH) pindex(NO_NOMATCH) pindex(NONOMATCH) cindex(globbing, no matches) item(tt(NOMATCH) (tt(PLUS()3)) )( If a pattern for filename generation has no matches, print an error, instead of leaving it unchanged in the argument list. This also applies to file expansion of an initial `tt(~)' or `tt(=)'. ) pindex(NULL_GLOB) pindex(NO_NULL_GLOB) pindex(NULLGLOB) pindex(NONULLGLOB) cindex(globbing, no matches) item(tt(NULL_GLOB) (tt(-G)))( If a pattern for filename generation has no matches, delete the pattern from the argument list instead of reporting an error. Overrides tt(NOMATCH). ) pindex(NUMERIC_GLOB_SORT) pindex(NO_NUMERIC_GLOB_SORT) pindex(NUMERICGLOBSORT) pindex(NONUMERICGLOBSORT) cindex(globbing, sorting numerically) item(tt(NUMERIC_GLOB_SORT))( If numeric filenames are matched by a filename generation pattern, sort the filenames numerically rather than lexicographically. ) pindex(RC_EXPAND_PARAM) pindex(NO_RC_EXPAND_PARAM) pindex(RCEXPANDPARAM) pindex(NORCEXPANDPARAM) cindex(rc, parameter expansion style) cindex(parameter expansion style, rc) item(tt(RC_EXPAND_PARAM) (tt(-P)))( Array expansions of the form `var(foo)tt(${)var(xx)tt(})var(bar)', where the parameter var(xx) is set to tt(LPAR())var(a b c)tt(RPAR()), are substituted with `var(fooabar foobbar foocbar)' instead of the default `var(fooa b cbar)'. Note that an empty array will therefore cause all arguments to be removed. ) pindex(REMATCH_PCRE) pindex(NO_REMATCH_PCRE) pindex(REMATCHPCRE) pindex(NOREMATCHPCRE) cindex(regexp, PCRE) cindex(PCRE, regexp) item(tt(REMATCH_PCRE))( If set, regular expression matching with the tt(=~) operator will use Perl-Compatible Regular Expressions from the PCRE library. (The tt(zsh/pcre) module must be available.) If not set, regular expressions will use the extended regexp syntax provided by the system libraries. ) pindex(SH_GLOB) pindex(NO_SH_GLOB) pindex(SHGLOB) pindex(NOSHGLOB) cindex(sh, globbing style) cindex(globbing style, sh) item(tt(SH_GLOB) )( Disables the special meaning of `tt(LPAR())', `tt(|)', `tt(RPAR())' and 'tt(<)' for globbing the result of parameter and command substitutions, and in some other places where the shell accepts patterns. If tt(SH_GLOB) is set but tt(KSH_GLOB) is not, the shell allows the interpretation of subshell expressions enclosed in parentheses in some cases where there is no space before the opening parenthesis, e.g. tt(!LPAR()true+RPAR()) is interpreted as if there were a space after the tt(!). This option is set by default if zsh is invoked as tt(sh) or tt(ksh). ) pindex(UNSET) pindex(NO_UNSET) pindex(NOUNSET) cindex(parameters, substituting unset) cindex(unset parameters, substituting) item(tt(UNSET) (tt(PLUS()u), ksh: tt(PLUS()u)) )( Treat unset parameters as if they were empty when substituting, and as if they were zero when reading their values in arithmetic expansion and arithmetic commands. Otherwise they are treated as an error. ) pindex(WARN_CREATE_GLOBAL) pindex(NO_WARN_CREATE_GLOBAL) pindex(WARNCREATEGLOBAL) pindex(NOWARNCREATEGLOBAL) cindex(parameters, warning when created globally) item(tt(WARN_CREATE_GLOBAL))( Print a warning message when a global parameter is created in a function by an assignment or in math context. This often indicates that a parameter has not been declared local when it should have been. Parameters explicitly declared global from within a function using tt(typeset -g) do not cause a warning. Note that there is no warning when a local parameter is assigned to in a nested function, which may also indicate an error. ) pindex(WARN_NESTED_VAR) pindex(NO_WARN_NESTED_VAR) pindex(WARNNESTEDVAR) pindex(NO_WARNNESTEDVAR) cindex(parameters, warning when setting in enclosing scope) item(tt(WARN_NESTED_VAR))( Print a warning message when an existing parameter from an enclosing function scope, or global, is set in a function by an assignment or in math context. Assignment to shell special parameters does not cause a warning. This is the companion to tt(WARN_CREATE_GLOBAL) as in this case the warning is only printed when a parameter is em(not) created. Where possible, use of tt(typeset -g) to set the parameter suppresses the error, but note that this needs to be used every time the parameter is set. To restrict the effect of this option to a single function scope, use `tt(functions -W)'. For example, the following code produces a warning for the assignment inside the function tt(nested) as that overrides the value within tt(toplevel) example(toplevel+LPAR()RPAR() { local foo="in fn" nested } nested+LPAR()RPAR() { foo="in nested" } setopt warn_nested_var toplevel) ) enditem() subsect(History) startitem() pindex(APPEND_HISTORY) pindex(NO_APPEND_HISTORY) pindex(APPENDHISTORY) pindex(NOAPPENDHISTORY) cindex(history, appending to a file) item(tt(APPEND_HISTORY) )( If this is set, zsh sessions will append their history list to the history file, rather than replace it. Thus, multiple parallel zsh sessions will all have the new entries from their history lists added to the history file, in the order that they exit. The file will still be periodically re-written to trim it when the number of lines grows 20% beyond the value specified by tt($SAVEHIST) (see also the tt(HIST_SAVE_BY_COPY) option). ) pindex(BANG_HIST) pindex(NO_BANG_HIST) pindex(BANGHIST) pindex(NOBANGHIST) cindex(history, enable substitution) cindex(enable history substitution) item(tt(BANG_HIST) (tt(PLUS()K)) )( Perform textual history expansion, bf(csh)-style, treating the character `tt(!)' specially. ) pindex(EXTENDED_HISTORY) pindex(NO_EXTENDED_HISTORY) pindex(EXTENDEDHISTORY) pindex(NOEXTENDEDHISTORY) cindex(history, timestamping) item(tt(EXTENDED_HISTORY) )( Save each command's beginning timestamp (in seconds since the epoch) and the duration (in seconds) to the history file. The format of this prefixed data is: `tt(: )var()tt(:)var()tt(;)var()'. ) pindex(HIST_ALLOW_CLOBBER) pindex(NO_HIST_ALLOW_CLOBBER) pindex(HISTALLOWCLOBBER) pindex(NOHISTALLOWCLOBBER) item(tt(HIST_ALLOW_CLOBBER))( Add `tt(|)' to output redirections in the history. This allows history references to clobber files even when tt(CLOBBER) is unset. ) pindex(HIST_BEEP) pindex(NO_HIST_BEEP) pindex(HISTBEEP) pindex(NOHISTBEEP) cindex(history beeping) cindex(beep, history) item(tt(HIST_BEEP) )( Beep in ZLE when a widget attempts to access a history entry which isn't there. ) pindex(HIST_EXPIRE_DUPS_FIRST) pindex(NO_HIST_EXPIRE_DUPS_FIRST) pindex(HISTEXPIREDUPSFIRST) pindex(NOHISTEXPIREDUPSFIRST) cindex(history, expiring duplicates) item(tt(HIST_EXPIRE_DUPS_FIRST))( If the internal history needs to be trimmed to add the current command line, setting this option will cause the oldest history event that has a duplicate to be lost before losing a unique event from the list. You should be sure to set the value of tt(HISTSIZE) to a larger number than tt(SAVEHIST) in order to give you some room for the duplicated events, otherwise this option will behave just like tt(HIST_IGNORE_ALL_DUPS) once the history fills up with unique events. ) pindex(HIST_FCNTL_LOCK) pindex(NO_HIST_FCNTL_LOCK) pindex(HISTFCNTLLOCK) pindex(NOHISTFCNTLLOCK) item(tt(HIST_FCNTL_LOCK))( When writing out the history file, by default zsh uses ad-hoc file locking to avoid known problems with locking on some operating systems. With this option locking is done by means of the system's tt(fcntl) call, where this method is available. On recent operating systems this may provide better performance, in particular avoiding history corruption when files are stored on NFS. ) pindex(HIST_FIND_NO_DUPS) pindex(NO_HIST_FIND_NO_DUPS) pindex(HISTFINDNODUPS) pindex(NOHISTFINDNODUPS) cindex(history, ignoring duplicates in search) item(tt(HIST_FIND_NO_DUPS))( When searching for history entries in the line editor, do not display duplicates of a line previously found, even if the duplicates are not contiguous. ) pindex(HIST_IGNORE_ALL_DUPS) pindex(NO_HIST_IGNORE_ALL_DUPS) pindex(HISTIGNOREALLDUPS) pindex(NOHISTIGNOREALLDUPS) cindex(history, ignoring all duplicates) item(tt(HIST_IGNORE_ALL_DUPS))( If a new command line being added to the history list duplicates an older one, the older command is removed from the list (even if it is not the previous event). ) pindex(HIST_IGNORE_DUPS) pindex(NO_HIST_IGNORE_DUPS) pindex(HISTIGNOREDUPS) pindex(NOHISTIGNOREDUPS) cindex(history, ignoring duplicates) item(tt(HIST_IGNORE_DUPS) (tt(-h)))( Do not enter command lines into the history list if they are duplicates of the previous event. ) pindex(HIST_IGNORE_SPACE) pindex(NO_HIST_IGNORE_SPACE) pindex(HISTIGNORESPACE) pindex(NOHISTIGNORESPACE) cindex(history, ignoring spaces) item(tt(HIST_IGNORE_SPACE) (tt(-g)))( Remove command lines from the history list when the first character on the line is a space, or when one of the expanded aliases contains a leading space. Only normal aliases (not global or suffix aliases) have this behaviour. Note that the command lingers in the internal history until the next command is entered before it vanishes, allowing you to briefly reuse or edit the line. If you want to make it vanish right away without entering another command, type a space and press return. ) pindex(HIST_LEX_WORDS) pindex(NO_HIST_LEX_WORDS) pindex(HISTLEXWORDS) pindex(NOHISTLEXWORDS) item(tt(HIST_LEX_WORDS))( By default, shell history that is read in from files is split into words on all white space. This means that arguments with quoted whitespace are not correctly handled, with the consequence that references to words in history lines that have been read from a file may be inaccurate. When this option is set, words read in from a history file are divided up in a similar fashion to normal shell command line handling. Although this produces more accurately delimited words, if the size of the history file is large this can be slow. Trial and error is necessary to decide. ) pindex(HIST_NO_FUNCTIONS) pindex(NO_HIST_NO_FUNCTIONS) pindex(HISTNOFUNCTIONS) pindex(NOHISTNOFUNCTIONS) item(tt(HIST_NO_FUNCTIONS))( Remove function definitions from the history list. Note that the function lingers in the internal history until the next command is entered before it vanishes, allowing you to briefly reuse or edit the definition. ) pindex(HIST_NO_STORE) pindex(NO_HIST_NO_STORE) pindex(HISTNOSTORE) pindex(NOHISTNOSTORE) item(tt(HIST_NO_STORE))( Remove the tt(history) (tt(fc -l)) command from the history list when invoked. Note that the command lingers in the internal history until the next command is entered before it vanishes, allowing you to briefly reuse or edit the line. ) pindex(HIST_REDUCE_BLANKS) pindex(NO_HIST_REDUCE_BLANKS) pindex(HISTREDUCEBLANKS) pindex(NOHISTREDUCEBLANKS) item(tt(HIST_REDUCE_BLANKS))( Remove superfluous blanks from each command line being added to the history list. ) pindex(HIST_SAVE_BY_COPY) pindex(NO_HIST_SAVE_BY_COPY) pindex(HISTSAVEBYCOPY) pindex(NOHISTSAVEBYCOPY) item(tt(HIST_SAVE_BY_COPY) )( When the history file is re-written, we normally write out a copy of the file named tt($HISTFILE.new) and then rename it over the old one. However, if this option is unset, we instead truncate the old history file and write out the new version in-place. If one of the history-appending options is enabled, this option only has an effect when the enlarged history file needs to be re-written to trim it down to size. Disable this only if you have special needs, as doing so makes it possible to lose history entries if zsh gets interrupted during the save. When writing out a copy of the history file, zsh preserves the old file's permissions and group information, but will refuse to write out a new file if it would change the history file's owner. ) pindex(HIST_SAVE_NO_DUPS) pindex(NO_HIST_SAVE_NO_DUPS) pindex(HISTSAVENODUPS) pindex(NOHISTSAVENODUPS) item(tt(HIST_SAVE_NO_DUPS))( When writing out the history file, older commands that duplicate newer ones are omitted. ) pindex(HIST_VERIFY) pindex(NO_HIST_VERIFY) pindex(HISTVERIFY) pindex(NOHISTVERIFY) cindex(history, verifying substitution) item(tt(HIST_VERIFY))( Whenever the user enters a line with history expansion, don't execute the line directly; instead, perform history expansion and reload the line into the editing buffer. ) pindex(INC_APPEND_HISTORY) pindex(NO_INC_APPEND_HISTORY) pindex(INCAPPENDHISTORY) pindex(NOINCAPPENDHISTORY) cindex(history, incremental appending to a file) item(tt(INC_APPEND_HISTORY))( This option works like tt(APPEND_HISTORY) except that new history lines are added to the tt($HISTFILE) incrementally (as soon as they are entered), rather than waiting until the shell exits. The file will still be periodically re-written to trim it when the number of lines grows 20% beyond the value specified by tt($SAVEHIST) (see also the tt(HIST_SAVE_BY_COPY) option). ) pindex(INC_APPEND_HISTORY_TIME) pindex(NO_INC_APPEND_HISTORY_TIME) pindex(INCAPPENDHISTORYTIME) pindex(NOINCAPPENDHISTORYTIME) cindex(history, incremental appending to a file with time) item(tt(INC_APPEND_HISTORY_TIME))( This option is a variant of tt(INC_APPEND_HISTORY) in which, where possible, the history entry is written out to the file after the command is finished, so that the time taken by the command is recorded correctly in the history file in tt(EXTENDED_HISTORY) format. This means that the history entry will not be available immediately from other instances of the shell that are using the same history file. This option is only useful if tt(INC_APPEND_HISTORY) and tt(SHARE_HISTORY) are turned off. The three options should be considered mutually exclusive. ) pindex(SHARE_HISTORY) pindex(NO_SHARE_HISTORY) pindex(SHAREHISTORY) pindex(NOSHAREHISTORY) cindex(share history) cindex(history, sharing) item(tt(SHARE_HISTORY) )( This option both imports new commands from the history file, and also causes your typed commands to be appended to the history file (the latter is like specifying tt(INC_APPEND_HISTORY), which should be turned off if this option is in effect). The history lines are also output with timestamps ala tt(EXTENDED_HISTORY) (which makes it easier to find the spot where we left off reading the file after it gets re-written). By default, history movement commands visit the imported lines as well as the local lines, but you can toggle this on and off with the set-local-history zle binding. It is also possible to create a zle widget that will make some commands ignore imported commands, and some include them. If you find that you want more control over when commands get imported, you may wish to turn tt(SHARE_HISTORY) off, tt(INC_APPEND_HISTORY) or tt(INC_APPEND_HISTORY_TIME) (see above) on, and then manually import commands whenever you need them using `tt(fc -RI)'. ) enditem() subsect(Initialisation) startitem() pindex(ALL_EXPORT) pindex(NO_ALL_EXPORT) pindex(ALLEXPORT) pindex(NOALLEXPORT) cindex(export, automatic) item(tt(ALL_EXPORT) (tt(-a), ksh: tt(-a)))( All parameters subsequently defined are automatically exported. ) pindex(GLOBAL_EXPORT) pindex(NO_GLOBAL_EXPORT) pindex(GLOBALEXPORT) pindex(NOGLOBALEXPORT) cindex(environment, and local parameters) item(tt(GLOBAL_EXPORT) )( If this option is set, passing the tt(-x) flag to the builtins tt(declare), tt(float), tt(integer), tt(readonly) and tt(typeset) (but not tt(local)) will also set the tt(-g) flag; hence parameters exported to the environment will not be made local to the enclosing function, unless they were already or the flag tt(+g) is given explicitly. If the option is unset, exported parameters will be made local in just the same way as any other parameter. This option is set by default for backward compatibility; it is not recommended that its behaviour be relied upon. Note that the builtin tt(export) always sets both the tt(-x) and tt(-g) flags, and hence its effect extends beyond the scope of the enclosing function; this is the most portable way to achieve this behaviour. ) cindex(exporting, and local parameters) pindex(GLOBAL_RCS) pindex(NO_GLOBAL_RCS) pindex(GLOBALRCS) pindex(NOGLOBALRCS) cindex(startup files, global, inhibiting) cindex(files, global startup, inhibiting) item(tt(GLOBAL_RCS) (tt(+d)) )( If this option is unset, the startup files tt(zprofile()), tt(zshrc()), tt(zlogin()) and tt(zlogout()) will not be run. It can be disabled and re-enabled at any time, including inside local startup files (tt(.zshrc), etc.). ) pindex(RCS) pindex(NO_RCS) pindex(NORCS) cindex(startup files, sourcing) item(tt(RCS) (tt(PLUS()f)) )( After tt(zshenv()) is sourced on startup, source the tt(.zshenv), tt(zprofile()), tt(.zprofile), tt(zshrc()), tt(.zshrc), tt(zlogin()), tt(.zlogin), and tt(.zlogout) files, as described in noderef(Files). If this option is unset, the tt(zshenv()) file is still sourced, but any of the others will not be; it can be set at any time to prevent the remaining startup files after the currently executing one from being sourced. ) enditem() subsect(Input/Output) startitem() pindex(ALIASES) pindex(NO_ALIASES) pindex(NOALIASES) cindex(aliases, expansion) item(tt(ALIASES) )( Expand aliases. ) pindex(CLOBBER) pindex(NO_CLOBBER) pindex(NOCLOBBER) cindex(clobbering, of files) cindex(file clobbering, allowing) item(tt(CLOBBER) (tt(PLUS()C), ksh: tt(PLUS()C)) )( Allows `tt(>)' redirection to truncate existing files. Otherwise `tt(>!)' or `tt(>|)' must be used to truncate a file. If the option is not set, and the option tt(APPEND_CREATE) is also not set, `tt(>>!)' or `tt(>>|)' must be used to create a file. If either option is set, `tt(>>)' may be used. ) pindex(CLOBBER_EMPTY) pindex(NO_CLOBBER_EMPTY) pindex(CLOBBEREMPTY) pindex(NOCLOBBEREMPTY) cindex(clobbering, of empty files) cindex(file clobbering, of empty files) item(tt(CLOBBER_EMPTY))( This option is only used if the option tt(CLOBBER) is not set: note that it is set by default. If this option is set, then regular files of zero length may be ovewritten (`clobbered'). Note that it is possible another process has written to the file between this test and use of the file by the current process. This option should therefore not be used in cases where files to be clobbered may be written to asynchronously. ) pindex(CORRECT) pindex(NO_CORRECT) pindex(NOCORRECT) cindex(correction, spelling) cindex(spelling correction) item(tt(CORRECT) (tt(-0)))( Try to correct the spelling of commands. Note that, when the tt(HASH_LIST_ALL) option is not set or when some directories in the path are not readable, this may falsely report spelling errors the first time some commands are used. The shell variable tt(CORRECT_IGNORE) may be set to a pattern to match words that will never be offered as corrections. ) pindex(CORRECT_ALL) pindex(NO_CORRECT_ALL) pindex(CORRECTALL) pindex(NOCORRECTALL) item(tt(CORRECT_ALL) (tt(-O)))( Try to correct the spelling of all arguments in a line. The shell variable tt(CORRECT_IGNORE_FILE) may be set to a pattern to match file names that will never be offered as corrections. ) pindex(DVORAK) pindex(NO_DVORAK) pindex(NODVORAK) item(tt(DVORAK))( Use the Dvorak keyboard instead of the standard qwerty keyboard as a basis for examining spelling mistakes for the tt(CORRECT) and tt(CORRECT_ALL) options and the tt(spell-word) editor command. ) pindex(FLOW_CONTROL) pindex(NO_FLOW_CONTROL) pindex(FLOWCONTROL) pindex(NOFLOWCONTROL) cindex(flow control) item(tt(FLOW_CONTROL) )( If this option is unset, output flow control via start/stop characters (usually assigned to ^S/^Q) is disabled in the shell's editor. ) pindex(IGNORE_EOF) pindex(NO_IGNORE_EOF) pindex(IGNOREEOF) pindex(NOIGNOREEOF) cindex(EOF, ignoring) item(tt(IGNORE_EOF) (tt(-7)))( Do not exit on end-of-file. Require the use of tt(exit) or tt(logout) instead. However, ten consecutive EOFs will cause the shell to exit anyway, to avoid the shell hanging if its tty goes away. Also, if this option is set and the Zsh Line Editor is used, widgets implemented by shell functions can be bound to EOF (normally Control-D) without printing the normal warning message. This works only for normal widgets, not for completion widgets. ) pindex(INTERACTIVE_COMMENTS) pindex(NO_INTERACTIVE_COMMENTS) pindex(INTERACTIVECOMMENTS) pindex(NOINTERACTIVECOMMENTS) cindex(comments, in interactive shells) item(tt(INTERACTIVE_COMMENTS) (tt(-k)) )( Allow comments even in interactive shells. ) pindex(HASH_CMDS) pindex(NO_HASH_CMDS) pindex(HASHCMDS) pindex(NOHASHCMDS) cindex(hashing, of commands) cindex(command hashing) item(tt(HASH_CMDS) )( Note the location of each command the first time it is executed. Subsequent invocations of the same command will use the saved location, avoiding a path search. If this option is unset, no path hashing is done at all. However, when tt(CORRECT) is set, commands whose names do not appear in the functions or aliases hash tables are hashed in order to avoid reporting them as spelling errors. ) pindex(HASH_DIRS) pindex(NO_HASH_DIRS) pindex(HASHDIRS) pindex(NOHASHDIRS) cindex(hashing, of directories) cindex(directories, hashing) item(tt(HASH_DIRS) )( Whenever a command name is hashed, hash the directory containing it, as well as all directories that occur earlier in the path. Has no effect if neither tt(HASH_CMDS) nor tt(CORRECT) is set. ) pindex(HASH_EXECUTABLES_ONLY) pindex(NO_HASH_EXECUTABLES_ONLY) pindex(HASHEXECUTABLESONLY) pindex(NOHASHEXECUTABLESONLY) cindex(hashing, of executables) cindex(executables, hashing) item(tt(HASH_EXECUTABLES_ONLY))( When hashing commands because of tt(HASH_CMDS), check that the file to be hashed is actually an executable. This option is unset by default as if the path contains a large number of commands, or consists of many remote files, the additional tests can take a long time. Trial and error is needed to show if this option is beneficial. ) pindex(MAIL_WARNING) pindex(NO_MAIL_WARNING) pindex(MAILWARNING) pindex(NOMAILWARNING) cindex(mail, warning of reading) item(tt(MAIL_WARNING) (tt(-U)))( Print a warning message if a mail file has been accessed since the shell last checked. ) pindex(PATH_DIRS) pindex(NO_PATH_DIRS) pindex(PATHDIRS) pindex(NOPATHDIRS) cindex(path search, extended) item(tt(PATH_DIRS) (tt(-Q)))( Perform a path search even on command names with slashes in them. Thus if `tt(/usr/local/bin)' is in the user's path, and he or she types `tt(X11/xinit)', the command `tt(/usr/local/bin/X11/xinit)' will be executed (assuming it exists). Commands explicitly beginning with `tt(/)', `tt(./)' or `tt(../)' are not subject to the path search. This also applies to the `tt(.)' and tt(source) builtins. Note that subdirectories of the current directory are always searched for executables specified in this form. This takes place before any search indicated by this option, and regardless of whether `tt(.)' or the current directory appear in the command search path. ) pindex(PATH_SCRIPT) pindex(NO_PATH_SCRIPT) pindex(PATHSCRIPT) pindex(NOPATHSCRIPT) cindex(path search, for script argument to shell) item(tt(PATH_SCRIPT) )( If this option is not set, a script passed as the first non-option argument to the shell must contain the name of the file to open. If this option is set, and the script does not specify a directory path, the script is looked for first in the current directory, then in the command path. See ifnzman(noderef(Invocation))\ ifzman(the section INVOCATION in zmanref(zsh)). ) pindex(PRINT_EIGHT_BIT) pindex(NO_PRINT_EIGHT_BIT) pindex(PRINTEIGHTBIT) pindex(NOPRINTEIGHTBIT) cindex(eight bit characters, printing) item(tt(PRINT_EIGHT_BIT))( Print eight bit characters literally in completion lists, etc. This option is not necessary if your system correctly returns the printability of eight bit characters (see manref(ctype)(3)). ) pindex(PRINT_EXIT_VALUE) pindex(NO_PRINT_EXIT_VALUE) pindex(PRINTEXITVALUE) pindex(NOPRINTEXITVALUE) cindex(exit status, printing) item(tt(PRINT_EXIT_VALUE) (tt(-1)))( Print the exit value of programs with non-zero exit status. This is only available at the command line in interactive shells. ) pindex(RC_QUOTES) pindex(NO_RC_QUOTES) pindex(RCQUOTES) pindex(NORCQUOTES) cindex(rc, quoting style) cindex(quoting style, rc) item(tt(RC_QUOTES))( Allow the character sequence `tt('')' to signify a single quote within singly quoted strings. Note this does not apply in quoted strings using the format tt($')var(...)tt('), where a backslashed single quote can be used. ) pindex(RM_STAR_SILENT) pindex(NO_RM_STAR_SILENT) pindex(RMSTARSILENT) pindex(NORMSTARSILENT) cindex(rm *, querying before) cindex(querying before rm *) item(tt(RM_STAR_SILENT) (tt(-H)) )( Do not query the user before executing `tt(rm *)' or `tt(rm path/*)'. ) pindex(RM_STAR_WAIT) pindex(NO_RM_STAR_WAIT) pindex(RMSTARWAIT) pindex(NORMSTARWAIT) cindex(rm *, waiting before) cindex(waiting before rm *) item(tt(RM_STAR_WAIT))( If querying the user before executing `tt(rm *)' or `tt(rm path/*)', first wait ten seconds and ignore anything typed in that time. This avoids the problem of reflexively answering `yes' to the query when one didn't really mean it. The wait and query can always be avoided by expanding the `tt(*)' in ZLE (with tab). ) pindex(SHORT_LOOPS) pindex(NO_SHORT_LOOPS) pindex(SHORTLOOPS) pindex(NOSHORTLOOPS) item(tt(SHORT_LOOPS) )( Allow the short forms of tt(for), tt(repeat), tt(select), tt(if), and tt(function) constructs. ) pindex(SHORT_REPEAT) pindex(NO_SHORT_REPEAT) pindex(SHORTREPEAT) pindex(NOSHORTREPEAT) item(tt(SHORT_REPEAT))( Allow the short form tt(repeat) as tt(SHORT_LOOPS) but without enabling it for the other constructs. ) pindex(SUN_KEYBOARD_HACK) pindex(NO_SUN_KEYBOARD_HACK) pindex(SUNKEYBOARDHACK) pindex(NOSUNKEYBOARDHACK) cindex(sun keyboard, annoying) cindex(annoying keyboard, sun) item(tt(SUN_KEYBOARD_HACK) (tt(-L)))( If a line ends with a backquote, and there are an odd number of backquotes on the line, ignore the trailing backquote. This is useful on some keyboards where the return key is too small, and the backquote key lies annoyingly close to it. As an alternative the variable tt(KEYBOARD_HACK) lets you choose the character to be removed. ) enditem() subsect(Job Control) startitem() pindex(AUTO_CONTINUE) pindex(NO_AUTO_CONTINUE) pindex(AUTOCONTINUE) pindex(NOAUTOCONTINUE) cindex(jobs, continuing automatically) cindex(continuing jobs automatically) item(tt(AUTO_CONTINUE))( With this option set, stopped jobs that are removed from the job table with the tt(disown) builtin command are automatically sent a tt(CONT) signal to make them running. ) pindex(AUTO_RESUME) pindex(NO_AUTO_RESUME) pindex(AUTORESUME) pindex(NOAUTORESUME) cindex(jobs, resuming automatically) cindex(resuming jobs automatically) item(tt(AUTO_RESUME) (tt(-W)))( Treat single word simple commands without redirection as candidates for resumption of an existing job. ) pindex(BG_NICE) pindex(NO_BG_NICE) pindex(BGNICE) pindex(NOBGNICE) cindex(jobs, background priority) cindex(background jobs, priority of) cindex(priority of background jobs) item(tt(BG_NICE) (tt(-6)) )( Run all background jobs at a lower priority. This option is set by default. ) pindex(CHECK_JOBS) pindex(NO_CHECK_JOBS) pindex(CHECKJOBS) pindex(NOCHECKJOBS) cindex(exiting, checking jobs when) cindex(logging out, checking jobs when) item(tt(CHECK_JOBS) )( Report the status of background and suspended jobs before exiting a shell with job control; a second attempt to exit the shell will succeed. tt(NO_CHECK_JOBS) is best used only in combination with tt(NO_HUP), else such jobs will be killed automatically. The check is omitted if the commands run from the previous command line included a `tt(jobs)' command, since it is assumed the user is aware that there are background or suspended jobs. A `tt(jobs)' command run from one of the hook functions defined in ifnzman(the section `Special Functions' in noderef(Functions))\ ifzman(the section SPECIAL FUNCTIONS in zmanref(zshmisc)) is not counted for this purpose. ) pindex(CHECK_RUNNING_JOBS) pindex(NO_CHECK_RUNNING_JOBS) pindex(CHECKRUNNINGJOBS) pindex(NOCHECKRUNNINGJOBS) cindex(exiting, checking running jobs when) cindex(logging out, checking running jobs when) item(tt(CHECK_RUNNING_JOBS) )( Check for both running and suspended jobs when tt(CHECK_JOBS) is enabled. When this option is disabled, zsh checks only for suspended jobs, which matches the default behavior of bash. This option has no effect unless tt(CHECK_JOBS) is set. ) pindex(HUP) pindex(NO_HUP) pindex(NOHUP) cindex(jobs, HUP) item(tt(HUP) )( Send the tt(HUP) signal to running jobs when the shell exits. ) pindex(LONG_LIST_JOBS) pindex(NO_LONG_LIST_JOBS) pindex(LONGLISTJOBS) pindex(NOLONGLISTJOBS) cindex(jobs, list format) item(tt(LONG_LIST_JOBS) (tt(-R)))( Print job notifications in the long format by default. ) pindex(MONITOR) pindex(NO_MONITOR) pindex(NOMONITOR) cindex(job control, allowing) item(tt(MONITOR) (tt(-m), ksh: tt(-m)))( Allow job control. Set by default in interactive shells. ) pindex(NOTIFY) pindex(NO_NOTIFY) pindex(NONOTIFY) cindex(background jobs, notification) cindex(notification of background jobs) item(tt(NOTIFY) (tt(-5), ksh: tt(-b)) )( Report the status of background jobs immediately, rather than waiting until just before printing a prompt. ) pindex(POSIX_JOBS) pindex(POSIXJOBS) pindex(NO_POSIX_JOBS) pindex(NOPOSIXJOBS) cindex(bg, output in POSIX format) cindex(fg, output in POSIX format) cindex(job control, in subshell) cindex(jobs, output in subshell) item(tt(POSIX_JOBS) )( This option makes job control more compliant with the POSIX standard. When the option is not set, the tt(MONITOR) option is unset on entry to subshells, so that job control is no longer active. When the option is set, the tt(MONITOR) option and job control remain active in the subshell, but note that the subshell has no access to jobs in the parent shell. When the option is not set, jobs put in the background or foreground with tt(bg) or tt(fg) are displayed with the same information that would be reported by tt(jobs). When the option is set, only the text is printed. The output from tt(jobs) itself is not affected by the option. When the option is not set, job information from the parent shell is saved for output within a subshell (for example, within a pipeline). When the option is set, the output of tt(jobs) is empty until a job is started within the subshell. In previous versions of the shell, it was necessary to enable tt(POSIX_JOBS) in order for the builtin command tt(wait) to return the status of background jobs that had already exited. This is no longer the case. ) enditem() subsect(Prompting) startitem() pindex(PROMPT_BANG) pindex(NO_PROMPT_BANG) pindex(PROMPTBANG) pindex(NOPROMPTBANG) cindex(prompt, ! expansion) item(tt(PROMPT_BANG) )( If set, `tt(!)' is treated specially in prompt expansion. See ifzman(EXPANSION OF PROMPT SEQUENCES in zmanref(zshmisc))\ ifnzman(noderef(Prompt Expansion)). ) pindex(PROMPT_CR) pindex(NO_PROMPT_CR) pindex(PROMPTCR) pindex(NOPROMPTCR) cindex(prompt, with CR) item(tt(PROMPT_CR) (tt(PLUS()V)) )( Print a carriage return just before printing a prompt in the line editor. This is on by default as multi-line editing is only possible if the editor knows where the start of the line appears. ) pindex(PROMPT_SP) pindex(NO_PROMPT_SP) pindex(PROMPTSP) pindex(NOPROMPTSP) cindex(prompt, save partial lines) item(tt(PROMPT_SP) )( Attempt to preserve a partial line (i.e. a line that did not end with a newline) that would otherwise be covered up by the command prompt due to the tt(PROMPT_CR) option. This works by outputting some cursor-control characters, including a series of spaces, that should make the terminal wrap to the next line when a partial line is present (note that this is only successful if your terminal has automatic margins, which is typical). When a partial line is preserved, by default you will see an inverse+bold character at the end of the partial line: a `tt(%)' for a normal user or a `tt(#)' for root. If set, the shell parameter tt(PROMPT_EOL_MARK) can be used to customize how the end of partial lines are shown. NOTE: if the tt(PROMPT_CR) option is not set, enabling this option will have no effect. This option is on by default. ) pindex(PROMPT_PERCENT) pindex(NO_PROMPT_PERCENT) pindex(PROMPTPERCENT) pindex(NOPROMPTPERCENT) cindex(prompt, % expansion) item(tt(PROMPT_PERCENT) )( If set, `tt(%)' is treated specially in prompt expansion. See ifzman(EXPANSION OF PROMPT SEQUENCES in zmanref(zshmisc))\ ifnzman(noderef(Prompt Expansion)). ) pindex(PROMPT_SUBST) pindex(NO_PROMPT_SUBST) pindex(PROMPTSUBST) pindex(NOPROMPTSUBST) cindex(prompt, parameter expansion) item(tt(PROMPT_SUBST) )( If set, em(parameter expansion), em(command substitution) and em(arithmetic expansion) are performed in prompts. Substitutions within prompts do not affect the command status. ) pindex(TRANSIENT_RPROMPT) pindex(NO_TRANSIENT_RPROMPT) pindex(TRANSIENTRPROMPT) pindex(NOTRANSIENTRPROMPT) item(tt(TRANSIENT_RPROMPT))( Remove any right prompt from display when accepting a command line. This may be useful with terminals with other cut/paste methods. ) enditem() subsect(Scripts and Functions) startitem() pindex(ALIAS_FUNC_DEF) pindex(NO_ALIAS_FUNC_DEF) pindex(ALIASFUNCDEF) pindex(NOALIASFUNCDEF) cindex(functions, defining with expanded aliases) cindex(aliases, expanding in function definition) item(tt(ALIAS_FUNC_DEF) )( By default, zsh does not allow the definition of functions using the `var(name) tt(LPAR()RPAR())' syntax if var(name) was expanded as an alias: this causes an error. This is usually the desired behaviour, as otherwise the combination of an alias and a function based on the same definition can easily cause problems. When this option is set, aliases can be used for defining functions. For example, consider the following definitions as they might occur in a startup file. example(alias foo=bar foo+LPAR()RPAR() { print This probably does not do what you expect. }) Here, tt(foo) is expanded as an alias to tt(bar) before the tt(LPAR()RPAR()) is encountered, so the function defined would be named tt(bar). By default this is instead an error in native mode. Note that quoting any part of the function name, or using the keyword tt(function), avoids the problem, so is recommended when the function name can also be an alias. ) pindex(C_BASES) pindex(NO_C_BASES) pindex(CBASES) pindex(NOCBASES) cindex(bases, output in C format) cindex(hexadecimal, output in C format) cindex(octal, output in C format) item(tt(C_BASES))( Output hexadecimal numbers in the standard C format, for example `tt(0xFF)' instead of the usual `tt(16#FF)'. If the option tt(OCTAL_ZEROES) is also set (it is not by default), octal numbers will be treated similarly and hence appear as `tt(077)' instead of `tt(8#77)'. This option has no effect on the choice of the output base, nor on the output of bases other than hexadecimal and octal. Note that these formats will be understood on input irrespective of the setting of tt(C_BASES). ) pindex(C_PRECEDENCES) pindex(NO_C_PRECEDENCES) pindex(CPRECEDENCES) pindex(NOCPRECEDENCES) cindex(precedence, operator) cindex(operator precedence) item(tt(C_PRECEDENCES))( This alters the precedence of arithmetic operators to be more like C and other programming languages; ifnzman(noderef(Arithmetic Evaluation))\ ifzman(the section ARITHMETIC EVALUATION in zmanref(zshmisc)) has an explicit list. ) pindex(DEBUG_BEFORE_CMD) pindex(NO_DEBUG_BEFORE_CMD) pindex(DEBUGBEFORECMD) pindex(NODEBUGBEFORECMD) cindex(traps, DEBUG, before or after command) cindex(DEBUG trap, before or after command) item(tt(DEBUG_BEFORE_CMD) )( Run the tt(DEBUG) trap before each command; otherwise it is run after each command. Setting this option mimics the behaviour of ksh 93; with the option unset the behaviour is that of ksh 88. ) pindex(ERR_EXIT) pindex(NO_ERR_EXIT) pindex(ERREXIT) pindex(NOERREXIT) cindex(exit status, trapping) item(tt(ERR_EXIT) (tt(-e), ksh: tt(-e)))( If a command has a non-zero exit status, execute the tt(ZERR) trap, if set, and exit. This is disabled while running initialization scripts. The behaviour is also disabled inside tt(DEBUG) traps. In this case the option is handled specially: it is unset on entry to the trap. If the option tt(DEBUG_BEFORE_CMD) is set, as it is by default, and the option tt(ERR_EXIT) is found to have been set on exit, then the command for which the tt(DEBUG) trap is being executed is skipped. The option is restored after the trap exits. Non-zero status in a command list containing tt(&&) or tt(||) is ignored for commands not at the end of the list. Hence example(false && true) does not trigger exit. Exiting due to tt(ERR_EXIT) has certain interactions with asynchronous jobs noted in ifzman(the section JOBS in zmanref(zshmisc))\ ifnzman(noderef(Jobs & Signals)). ) pindex(ERR_RETURN) pindex(NO_ERR_RETURN) pindex(ERRRETURN) pindex(NOERRRETURN) cindex(function return, on error) cindex(return from function, on error) item(tt(ERR_RETURN))( If a command has a non-zero exit status, return immediately from the enclosing function. The logic is similar to that for tt(ERR_EXIT), except that an implicit tt(return) statement is executed instead of an tt(exit). This will trigger an exit at the outermost level of a non-interactive script. Normally this option inherits the behaviour of tt(ERR_EXIT) that code followed by `tt(&&)' `tt(||)' does not trigger a return. Hence in the following: example(summit || true) no return is forced as the combined effect always has a zero return status. Note. however, that if tt(summit) in the above example is itself a function, code inside it is considered separately: it may force a return from tt(summit) (assuming the option remains set within tt(summit)), but not from the enclosing context. This behaviour is different from tt(ERR_EXIT) which is unaffected by function scope. ) pindex(EVAL_LINENO) pindex(NO_EVAL_LINENO) pindex(EVALLINENO) pindex(NOEVALLINENO) cindex(line number, in evaluated expression) item(tt(EVAL_LINENO) )( If set, line numbers of expressions evaluated using the builtin tt(eval) are tracked separately of the enclosing environment. This applies both to the parameter tt(LINENO) and the line number output by the prompt escape tt(%i). If the option is set, the prompt escape tt(%N) will output the string `tt((eval))' instead of the script or function name as an indication. (The two prompt escapes are typically used in the parameter tt(PS4) to be output when the option tt(XTRACE) is set.) If tt(EVAL_LINENO) is unset, the line number of the surrounding script or function is retained during the evaluation. ) pindex(EXEC) pindex(NO_EXEC) pindex(NOEXEC) cindex(command execution, enabling) item(tt(EXEC) (tt(PLUS()n), ksh: tt(PLUS()n)) )( Do execute commands. Without this option, commands are read and checked for syntax errors, but not executed. This option cannot be turned off in an interactive shell, except when `tt(-n)' is supplied to the shell at startup. ) pindex(FUNCTION_ARGZERO) pindex(NO_FUNCTION_ARGZERO) pindex(FUNCTIONARGZERO) pindex(NOFUNCTIONARGZERO) cindex($0, setting) item(tt(FUNCTION_ARGZERO) )( When executing a shell function or sourcing a script, set tt($0) temporarily to the name of the function/script. Note that toggling tt(FUNCTION_ARGZERO) from on to off (or off to on) does not change the current value of tt($0). Only the state upon entry to the function or script has an effect. Compare tt(POSIX_ARGZERO). ) pindex(LOCAL_LOOPS) pindex(NO_LOCAL_LOOPS) pindex(LOCALLOOPS) pindex(NOLOCALLOOPS) cindex(break, inside function) cindex(continue, inside function) cindex(function, scope of break and continue) item(tt(LOCAL_LOOPS))( When this option is not set, the effect of tt(break) and tt(continue) commands may propagate outside function scope, affecting loops in calling functions. When the option is set in a calling function, a tt(break) or a tt(continue) that is not caught within a called function (regardless of the setting of the option within that function) produces a warning and the effect is cancelled. ) pindex(LOCAL_OPTIONS) pindex(NO_LOCAL_OPTIONS) pindex(LOCALOPTIONS) pindex(NOLOCALOPTIONS) item(tt(LOCAL_OPTIONS) )( If this option is set at the point of return from a shell function, most options (including this one) which were in force upon entry to the function are restored; options that are not restored are tt(PRIVILEGED) and tt(RESTRICTED). Otherwise, only this option, and the tt(LOCAL_LOOPS), tt(XTRACE) and tt(PRINT_EXIT_VALUE) options are restored. Hence if this is explicitly unset by a shell function the other options in force at the point of return will remain so. A shell function can also guarantee itself a known shell configuration with a formulation like `tt(emulate -L zsh)'; the tt(-L) activates tt(LOCAL_OPTIONS). ) pindex(LOCAL_PATTERNS) pindex(NO_LOCAL_PATTERNS) pindex(LOCALPATTERNS) pindex(NOLOCALPATTERNS) item(tt(LOCAL_PATTERNS))( If this option is set at the point of return from a shell function, the state of pattern disables, as set with the builtin command `tt(disable -p)', is restored to what it was when the function was entered. The behaviour of this option is similar to the effect of tt(LOCAL_OPTIONS) on options; hence `tt(emulate -L sh)' (or indeed any other emulation with the tt(-L) option) activates tt(LOCAL_PATTERNS). ) pindex(LOCAL_TRAPS) pindex(NO_LOCAL_TRAPS) pindex(LOCALTRAPS) pindex(NOLOCALTRAPS) item(tt(LOCAL_TRAPS) )( If this option is set when a signal trap is set inside a function, then the previous status of the trap for that signal will be restored when the function exits. Note that this option must be set em(prior) to altering the trap behaviour in a function; unlike tt(LOCAL_OPTIONS), the value on exit from the function is irrelevant. However, it does not need to be set before any global trap for that to be correctly restored by a function. For example, example(unsetopt localtraps trap - INT fn+LPAR()RPAR() { setopt localtraps; trap '' INT; sleep 3; }) will restore normal handling of tt(SIGINT) after the function exits. ) pindex(MULTI_FUNC_DEF) pindex(NO_MULTI_FUNC_DEF) pindex(MULTIFUNCDEF) pindex(NOMULTIFUNCDEF) item(tt(MULTI_FUNC_DEF) )( Allow definitions of multiple functions at once in the form `tt(fn1 fn2)var(...)tt(LPAR()RPAR())'; if the option is not set, this causes a parse error. Definition of multiple functions with the tt(function) keyword is always allowed. Multiple function definitions are not often used and can cause obscure errors. ) pindex(MULTIOS) pindex(NO_MULTIOS) pindex(NOMULTIOS) item(tt(MULTIOS) )( Perform implicit bf(tee)s or bf(cat)s when multiple redirections are attempted (see noderef(Redirection)). ) pindex(OCTAL_ZEROES) pindex(NO_OCTAL_ZEROES) pindex(OCTALZEROES) pindex(NOOCTALZEROES) cindex(octal, arithmetic expressions) item(tt(OCTAL_ZEROES) )( Interpret any integer constant beginning with a 0 as octal, per IEEE Std 1003.2-1992 (ISO 9945-2:1993). This is not enabled by default as it causes problems with parsing of, for example, date and time strings with leading zeroes. Sequences of digits indicating a numeric base such as the `tt(08)' component in `tt(08#77)' are always interpreted as decimal, regardless of leading zeroes. ) pindex(PIPE_FAIL) pindex(NO_PIPE_FAIL) pindex(PIPEFAIL) pindex(NOPIPEFAIL) cindex(exit status from pipeline) cindex(status, on exit from pipeline) cindex(pipeline, exit status from) item(tt(PIPE_FAIL))( By default, when a pipeline exits the exit status recorded by the shell and returned by the shell variable tt($?) reflects that of the rightmost element of a pipeline. If this option is set, the exit status instead reflects the status of the rightmost element of the pipeline that was non-zero, or zero if all elements exited with zero status. ) pindex(SOURCE_TRACE) pindex(NO_SOURCE_TRACE) pindex(SOURCETRACE) pindex(NOSOURCETRACE) item(tt(SOURCE_TRACE))( If set, zsh will print an informational message announcing the name of each file it loads. The format of the output is similar to that for the tt(XTRACE) option, with the message tt(). A file may be loaded by the shell itself when it starts up and shuts down (tt(Startup/Shutdown Files)) or by the use of the `tt(source)' and `tt(dot)' builtin commands. ) pindex(TYPESET_SILENT) pindex(NO_TYPESET_SILENT) pindex(TYPESETSILENT) pindex(NOTYPESETSILENT) item(tt(TYPESET_SILENT))( If this is unset, executing any of the `tt(typeset)' family of commands with no options and a list of parameters that have no values to be assigned but already exist will display the value of the parameter. If the option is set, they will only be shown when parameters are selected with the `tt(-m)' option. The option `tt(-p)' is available whether or not the option is set. ) pindex(TYPESET_TO_UNSET) pindex(NO_TYPESET_TO_UNSET) pindex(TYPESETTOUNSET) pindex(NOTYPESETTOUNSET) item(tt(TYPESET_TO_UNSET) )( When declaring a new parameter with any of the `tt(typeset)' family of related commands, the parameter remains unset unless and until a value is explicity assigned to it, either in the `tt(typeset)' command itself or as a later assignment statement. ) pindex(VERBOSE) pindex(NO_VERBOSE) pindex(NOVERBOSE) cindex(tracing, of input lines) cindex(input, tracing) item(tt(VERBOSE) (tt(-v), ksh: tt(-v)))( Print shell input lines as they are read. ) pindex(XTRACE) pindex(NO_XTRACE) pindex(NOXTRACE) cindex(tracing, of commands) cindex(commands, tracing) item(tt(XTRACE) (tt(-x), ksh: tt(-x)))( Print commands and their arguments as they are executed. The output is preceded by the value of tt($PS4), formatted as described in ifzman(the section EXPANSION OF PROMPT SEQUENCES in zmanref(zshmisc))\ ifnzman(noderef(Prompt Expansion)). ) enditem() subsect(Shell Emulation) startitem() pindex(APPEND_CREATE) pindex(NO_APPEND_CREATE) pindex(APPENDCREATE) pindex(NOAPPENDCREATE) cindex(clobbering, POSIX compatibility) cindex(file clobbering, POSIX compatibility) cindex(no clobber, POSIX compatible) item(tt(APPEND_CREATE) )( This option only applies when tt(NO_CLOBBER) (-tt(C)) is in effect. If this option is not set, the shell will report an error when a append redirection (tt(>>)) is used on a file that does not already exists (the traditional zsh behaviour of tt(NO_CLOBBER)). If the option is set, no error is reported (POSIX behaviour). ) pindex(BASH_REMATCH) pindex(NO_BASH_REMATCH) pindex(BASHREMATCH) pindex(NOBASHREMATCH) cindex(bash, BASH_REMATCH variable) cindex(regexp, bash BASH_REMATCH variable) item(tt(BASH_REMATCH))( When set, matches performed with the tt(=~) operator will set the tt(BASH_REMATCH) array variable, instead of the default tt(MATCH) and tt(match) variables. The first element of the tt(BASH_REMATCH) array will contain the entire matched text and subsequent elements will contain extracted substrings. This option makes more sense when tt(KSH_ARRAYS) is also set, so that the entire matched portion is stored at index 0 and the first substring is at index 1. Without this option, the tt(MATCH) variable contains the entire matched text and the tt(match) array variable contains substrings. ) pindex(BSD_ECHO) pindex(NO_BSD_ECHO) pindex(BSDECHO) pindex(NOBSDECHO) cindex(echo, BSD compatible) item(tt(BSD_ECHO) )( Make the tt(echo) builtin compatible with the BSD manref(echo)(1) command. This disables backslashed escape sequences in echo strings unless the tt(-e) option is specified. ) pindex(CONTINUE_ON_ERROR) pindex(NO_CONTINUE_ON_ERROR) pindex(CONTINUEONERROR) pindex(NOCONTINUEONERROR) cindex(error, option to continue script on) item(tt(CONTINUE_ON_ERROR))( If a fatal error is encountered (see ifnzman(noderef(Errors))\ ifzman(the section ERRORS in zmanref(zshmisc))), and the code is running in a script, the shell will resume execution at the next statement in the script at the top level, in other words outside all functions or shell constructs such as loops and conditions. This mimics the behaviour of interactive shells, where the shell returns to the line editor to read a new command; it was the normal behaviour in versions of zsh before 5.0.1. ) pindex(CSH_JUNKIE_HISTORY) pindex(NO_CSH_JUNKIE_HISTORY) pindex(CSHJUNKIEHISTORY) pindex(NOCSHJUNKIEHISTORY) cindex(csh, history style) cindex(history style, csh) item(tt(CSH_JUNKIE_HISTORY) )( A history reference without an event specifier will always refer to the previous command. Without this option, such a history reference refers to the same event as the previous history reference on the current command line, defaulting to the previous command. ) pindex(CSH_JUNKIE_LOOPS) pindex(NO_CSH_JUNKIE_LOOPS) pindex(CSHJUNKIELOOPS) pindex(NOCSHJUNKIELOOPS) cindex(csh, loop style) cindex(loop style, csh) item(tt(CSH_JUNKIE_LOOPS) )( Allow loop bodies to take the form `var(list)tt(; end)' instead of `tt(do )var(list)tt(; done)'. ) pindex(CSH_JUNKIE_QUOTES) pindex(NO_CSH_JUNKIE_QUOTES) pindex(CSHJUNKIEQUOTES) pindex(NOCSHJUNKIEQUOTES) cindex(csh, quoting style) cindex(quoting style, csh) item(tt(CSH_JUNKIE_QUOTES) )( Changes the rules for single- and double-quoted text to match that of bf(csh). These require that embedded newlines be preceded by a backslash; unescaped newlines will cause an error message. In double-quoted strings, it is made impossible to escape `tt($)', `tt(`)' or `tt(")' (and `tt(\)' itself no longer needs escaping). Command substitutions are only expanded once, and cannot be nested. ) pindex(CSH_NULLCMD) pindex(NO_CSH_NULLCMD) pindex(CSHNULLCMD) pindex(NOCSHNULLCMD) vindex(NULLCMD, ignoring) vindex(READNULLCMD, ignoring) cindex(redirections with no command, csh) cindex(csh, redirections with no command) item(tt(CSH_NULLCMD) )( Do not use the values of tt(NULLCMD) and tt(READNULLCMD) when running redirections with no command. This make such redirections fail (see noderef(Redirection)). ) pindex(KSH_ARRAYS) pindex(NO_KSH_ARRAYS) pindex(KSHARRAYS) pindex(NOKSHARRAYS) cindex(arrays, ksh style) cindex(array style, ksh) cindex(ksh, array style) item(tt(KSH_ARRAYS) )( Emulate bf(ksh) array handling as closely as possible. If this option is set, array elements are numbered from zero, an array parameter without subscript refers to the first element instead of the whole array, and braces are required to delimit a subscript (`tt(${path[2]})' rather than just `tt($path[2])') or to apply modifiers to any parameter (`tt(${PWD:h})' rather than `tt($PWD:h)'). ) pindex(KSH_AUTOLOAD) pindex(NO_KSH_AUTOLOAD) pindex(KSHAUTOLOAD) pindex(NOKSHAUTOLOAD) item(tt(KSH_AUTOLOAD) )( Emulate bf(ksh) function autoloading. This means that when a function is autoloaded, the corresponding file is merely executed, and must define the function itself. (By default, the function is defined to the contents of the file. However, the most common bf(ksh)-style case - of the file containing only a simple definition of the function - is always handled in the bf(ksh)-compatible manner.) ) pindex(KSH_OPTION_PRINT) pindex(NO_KSH_OPTION_PRINT) pindex(KSHOPTIONPRINT) pindex(NOKSHOPTIONPRINT) cindex(option printing, ksh style) cindex(option printing style, ksh) cindex(ksh, option printing style) item(tt(KSH_OPTION_PRINT) )( Alters the way options settings are printed: instead of separate lists of set and unset options, all options are shown, marked `on' if they are in the non-default state, `off' otherwise. ) pindex(KSH_TYPESET) pindex(NO_KSH_TYPESET) pindex(KSHTYPESET) pindex(NOKSHTYPESET) cindex(argument splitting, in typeset etc.) cindex(ksh, argument splitting in typeset) item(tt(KSH_TYPESET))( This option is now obsolete: a better appropximation to the behaviour of other shells is obtained with the reserved word interface to tt(declare), tt(export), tt(float), tt(integer), tt(local), tt(readonly) and tt(typeset). Note that the option is only applied when the reserved word interface is em(not) in use. Alters the way arguments to the tt(typeset) family of commands, including tt(declare), tt(export), tt(float), tt(integer), tt(local) and tt(readonly), are processed. Without this option, zsh will perform normal word splitting after command and parameter expansion in arguments of an assignment; with it, word splitting does not take place in those cases. ) pindex(KSH_ZERO_SUBSCRIPT) pindex(NO_KSH_ZERO_SUBSCRIPT) pindex(KSHZEROSUBSCRIPT) pindex(NOKSHZEROSUBSCRIPT) cindex(arrays, behaviour of index zero) item(tt(KSH_ZERO_SUBSCRIPT))( Treat use of a subscript of value zero in array or string expressions as a reference to the first element, i.e. the element that usually has the subscript 1. Ignored if tt(KSH_ARRAYS) is also set. If neither this option nor tt(KSH_ARRAYS) is set, accesses to an element of an array or string with subscript zero return an empty element or string, while attempts to set element zero of an array or string are treated as an error. However, attempts to set an otherwise valid subscript range that includes zero will succeed. For example, if tt(KSH_ZERO_SUBSCRIPT) is not set, example(array[0]=(element)) is an error, while example(array[0,1]=(element)) is not and will replace the first element of the array. This option is for compatibility with older versions of the shell and is not recommended in new code. ) pindex(POSIX_ALIASES) pindex(NO_POSIX_ALIASES) pindex(POSIXALIASES) pindex(NOPOSIXALIASES) item(tt(POSIX_ALIASES) )( When this option is set, reserved words are not candidates for alias expansion: it is still possible to declare any of them as an alias, but the alias will never be expanded. Reserved words are described in ifnzman(noderef(Reserved Words))\ ifzman(the section RESERVED WORDS in zmanref(zshmisc)). Alias expansion takes place while text is being read; hence when this option is set it does not take effect until the end of any function or other piece of shell code parsed as one unit. Note this may cause differences from other shells even when the option is in effect. For example, when running a command with `tt(zsh -c)', or even `tt(zsh -o posixaliases -c)', the entire command argument is parsed as one unit, so aliases defined within the argument are not available even in later lines. If in doubt, avoid use of aliases in non-interactive code. ) pindex(POSIX_ARGZERO) pindex(NO_POSIX_ARGZERO) pindex(POSIXARGZERO) pindex(NOPOSIXARGZERO) cindex($0, using) item(tt(POSIX_ARGZERO))( This option may be used to temporarily disable tt(FUNCTION_ARGZERO) and thereby restore the value of tt($0) to the name used to invoke the shell (or as set by the tt(-c) command line option). For compatibility with previous versions of the shell, emulations use tt(NO_FUNCTION_ARGZERO) instead of tt(POSIX_ARGZERO), which may result in unexpected scoping of tt($0) if the emulation mode is changed inside a function or script. To avoid this, explicitly enable tt(POSIX_ARGZERO) in the tt(emulate) command: example(emulate sh -o POSIX_ARGZERO) Note that tt(NO_POSIX_ARGZERO) has no effect unless tt(FUNCTION_ARGZERO) was already enabled upon entry to the function or script. ) pindex(POSIX_BUILTINS) pindex(NO_POSIX_BUILTINS) pindex(POSIXBUILTINS) pindex(NOPOSIXBUILTINS) item(tt(POSIX_BUILTINS) )( When this option is set the tt(command) builtin can be used to execute shell builtin commands. Parameter assignments specified before shell functions and special builtins are kept after the command completes unless the special builtin is prefixed with the tt(command) builtin. Special builtins are tt(.), tt(:), tt(break), tt(continue), tt(declare), tt(eval), tt(exit), tt(export), tt(integer), tt(local), tt(readonly), tt(return), tt(set), tt(shift), tt(source), tt(times), tt(trap) and tt(unset). In addition, various error conditions associated with the above builtins or tt(exec) cause a non-interactive shell to exit and an interactive shell to return to its top-level processing. Furthermore, functions and shell builtins are not executed after an tt(exec) prefix; the command to be executed must be an external command found in the path. Furthermore, the tt(getopts) builtin behaves in a POSIX-compatible fashion in that the associated variable tt(OPTIND) is not made local to functions, and its value is calculated differently to match other shells. Moreover, the warning and special exit code from tt([[ -o )var(non_existent_option)tt( ]]) are suppressed. ) pindex(POSIX_IDENTIFIERS) pindex(NO_POSIX_IDENTIFIERS) pindex(POSIXIDENTIFIERS) pindex(NOPOSIXIDENTIFIERS) cindex(identifiers, non-portable characters in) cindex(parameter names, non-portable characters in) item(tt(POSIX_IDENTIFIERS) )( When this option is set, only the ASCII characters tt(a) to tt(z), tt(A) to tt(Z), tt(0) to tt(9) and tt(_) may be used in identifiers (names of shell parameters and modules). In addition, setting this option limits the effect of parameter substitution with no braces, so that the expression tt($#) is treated as the parameter tt($#) even if followed by a valid parameter name. When it is unset, zsh allows expressions of the form tt($#)var(name) to refer to the length of tt($)var(name), even for special variables, for example in expressions such as tt($#-) and tt($#*). Another difference is that with the option set assignment to an unset variable in arithmetic context causes the variable to be created as a scalar rather than a numeric type. So after `tt(unset t; (( t = 3 )))'. without tt(POSIX_IDENTIFIERS) set tt(t) has integer type, while with it set it has scalar type. When the option is unset and multibyte character support is enabled (i.e. it is compiled in and the option tt(MULTIBYTE) is set), then additionally any alphanumeric characters in the local character set may be used in identifiers. Note that scripts and functions written with this feature are not portable, and also that both options must be set before the script or function is parsed; setting them during execution is not sufficient as the syntax var(variable)tt(=)var(value) has already been parsed as a command rather than an assignment. If multibyte character support is not compiled into the shell this option is ignored; all octets with the top bit set may be used in identifiers. This is non-standard but is the traditional zsh behaviour. ) pindex(POSIX_STRINGS) pindex(NO_POSIX_STRINGS) pindex(POSIXSTRINGS) pindex(NOPOSIXSTRINGS) cindex(discarding embedded nulls in $'...') cindex(embedded nulls, in $'...') cindex(nulls, embedded in $'...') item(tt(POSIX_STRINGS) )( This option affects processing of quoted strings. Currently it only affects the behaviour of null characters, i.e. character 0 in the portable character set corresponding to US ASCII. When this option is not set, null characters embedded within strings of the form tt($')var(...)tt(') are treated as ordinary characters. The entire string is maintained within the shell and output to files where necessary, although owing to restrictions of the library interface the string is truncated at the null character in file names, environment variables, or in arguments to external programs. When this option is set, the tt($')var(...)tt(') expression is truncated at the null character. Note that remaining parts of the same string beyond the termination of the quotes are not truncated. For example, the command line argument tt(a$'b\0c'd) is treated with the option off as the characters tt(a), tt(b), null, tt(c), tt(d), and with the option on as the characters tt(a), tt(b), tt(d). ) pindex(POSIX_TRAPS) pindex(NO_POSIX_TRAPS) pindex(POSIXTRAPS) pindex(NOPOSIXTRAPS) cindex(traps, on function exit) cindex(traps, POSIX compatibility) item(tt(POSIX_TRAPS) )( When this option is set, the usual zsh behaviour of executing traps for tt(EXIT) on exit from shell functions is suppressed. In that case, manipulating tt(EXIT) traps always alters the global trap for exiting the shell; the tt(LOCAL_TRAPS) option is ignored for the tt(EXIT) trap. Also, a tt(return) statement executed in a trap with no argument passes back from the function the value from the surrounding context, not from code executed within the trap. Furthermore, if a trap is set to be ignored, this state persists when a subshell is entered. Without the option, the trap would be reset to its default state at this point. ) pindex(SH_FILE_EXPANSION) pindex(NO_SH_FILE_EXPANSION) pindex(SHFILEEXPANSION) pindex(NOSHFILEEXPANSION) cindex(sh, expansion style) cindex(expansion style, sh) item(tt(SH_FILE_EXPANSION) )( Perform filename expansion (e.g., tt(~) expansion) em(before) parameter expansion, command substitution, arithmetic expansion and brace expansion. If this option is unset, it is performed em(after) brace expansion, so things like `tt(~$USERNAME)' and `tt(~{pfalstad,rc})' will work. ) pindex(SH_NULLCMD) pindex(NO_SH_NULLCMD) pindex(SHNULLCMD) pindex(NOSHNULLCMD) vindex(NULLCMD, ignoring) vindex(READNULLCMD, ignoring) cindex(sh, redirections with no command) cindex(ksh, redirections with no command) cindex(redirections with no command, sh) cindex(redirections with no command, ksh) item(tt(SH_NULLCMD) )( Do not use the values of tt(NULLCMD) and tt(READNULLCMD) when doing redirections, use `tt(:)' instead (see noderef(Redirection)). ) pindex(SH_OPTION_LETTERS) pindex(NO_SH_OPTION_LETTERS) pindex(SHOPTIONLETTERS) pindex(NOSHOPTIONLETTERS) cindex(sh, single letter options style) cindex(ksh, single letter options style) cindex(single letter options, ksh style) cindex(options, single letter, ksh style) item(tt(SH_OPTION_LETTERS) )( If this option is set the shell tries to interpret single letter options (which are used with tt(set) and tt(setopt)) like bf(ksh) does. This also affects the value of the tt(-) special parameter. ) pindex(SH_WORD_SPLIT) pindex(NO_SH_WORD_SPLIT) pindex(SHWORDSPLIT) pindex(NOSHWORDSPLIT) cindex(field splitting, sh style) cindex(sh, field splitting style) item(tt(SH_WORD_SPLIT) (tt(-y)) )( Causes field splitting to be performed on unquoted parameter expansions. Note that this option has nothing to do with word splitting. (See ifzman(zmanref(zshexpn))\ ifnzman(noderef(Parameter Expansion)).) ) pindex(TRAPS_ASYNC) pindex(NO_TRAPS_ASYNC) pindex(TRAPSASYNC) pindex(NOTRAPSASYNC) cindex(traps, asynchronous) item(tt(TRAPS_ASYNC))( While waiting for a program to exit, handle signals and run traps immediately. Otherwise the trap is run after a child process has exited. Note this does not affect the point at which traps are run for any case other than when the shell is waiting for a child process. ) enditem() subsect(Shell State) startitem() pindex(INTERACTIVE) pindex(NO_INTERACTIVE) pindex(NOINTERACTIVE) item(tt(INTERACTIVE) (tt(-i), ksh: tt(-i)))( This is an interactive shell. This option is set upon initialisation if the standard input is a tty and commands are being read from standard input. (See the discussion of tt(SHIN_STDIN).) This heuristic may be overridden by specifying a state for this option on the command line. The value of this option can only be changed via flags supplied at invocation of the shell. It cannot be changed once zsh is running. ) pindex(LOGIN) pindex(NO_LOGIN) pindex(NOLOGIN) item(tt(LOGIN) (tt(-l), ksh: tt(-l)))( This is a login shell. If this option is not explicitly set, the shell becomes a login shell if the first character of the tt(argv[0]) passed to the shell is a `tt(-)'. ) pindex(PRIVILEGED) pindex(NO_PRIVILEGED) pindex(NOPRIVILEGED) cindex(privileged mode) cindex(mode, privileged) item(tt(PRIVILEGED) (tt(-p), ksh: tt(-p)))( Turn on privileged mode. Typically this is used when script is to be run with elevated privileges. This should be done as follows directly with the tt(-p) option to zsh so that it takes effect during startup. example(#!/bin/zsh -p) The option is enabled automatically on startup if the effective user (group) ID is not equal to the real user (group) ID. In this case, turning the option off causes the effective user and group IDs to be set to the real user and group IDs. Be aware that if that fails the shell may be running with different IDs than was intended so a script should check for failure and act accordingly, for example: example(unsetopt privileged || exit) The tt(PRIVILEGED) option disables sourcing user startup files. If zsh is invoked as `tt(sh)' or `tt(ksh)' with this option set, tt(/etc/suid_profile) is sourced (after tt(/etc/profile) on interactive shells). Sourcing tt(~/.profile) is disabled and the contents of the tt(ENV) variable is ignored. This option cannot be changed using the tt(-m) option of tt(setopt) and tt(unsetopt), and changing it inside a function always changes it globally regardless of the tt(LOCAL_OPTIONS) option. ) pindex(RESTRICTED) pindex(NO_RESTRICTED) pindex(NORESTRICTED) cindex(restricted shell) item(tt(RESTRICTED) (tt(-r)))( Enables restricted mode. This option cannot be changed using tt(unsetopt), and setting it inside a function always changes it globally regardless of the tt(LOCAL_OPTIONS) option. See noderef(Restricted Shell). ) pindex(SHIN_STDIN) pindex(NO_SHIN_STDIN) pindex(SHINSTDIN) pindex(NOSHINSTDIN) item(tt(SHIN_STDIN) (tt(-s), ksh: tt(-s)))( Commands are being read from the standard input. Commands are read from standard input if no command is specified with tt(-c) and no file of commands is specified. If tt(SHIN_STDIN) is set explicitly on the command line, any argument that would otherwise have been taken as a file to run will instead be treated as a normal positional parameter. Note that setting or unsetting this option on the command line does not necessarily affect the state the option will have while the shell is running - that is purely an indicator of whether or not commands are em(actually) being read from standard input. The value of this option can only be changed via flags supplied at invocation of the shell. It cannot be changed once zsh is running. ) pindex(SINGLE_COMMAND) pindex(NO_SINGLE_COMMAND) pindex(SINGLECOMMAND) pindex(NOSINGLECOMMAND) cindex(single command) pindex(INTERACTIVE, use of) item(tt(SINGLE_COMMAND) (tt(-t), ksh: tt(-t)))( If the shell is reading from standard input, it exits after a single command has been executed. This also makes the shell non-interactive, unless the tt(INTERACTIVE) option is explicitly set on the command line. The value of this option can only be changed via flags supplied at invocation of the shell. It cannot be changed once zsh is running. ) enditem() subsect(Zle) startitem() pindex(BEEP) pindex(NO_BEEP) pindex(NOBEEP) cindex(beep, enabling) cindex(enabling the beep) item(tt(BEEP) (tt(PLUS()B)) )( Beep on error in ZLE. ) pindex(COMBINING_CHARS) pindex(NO_COMBINING_CHARS) pindex(COMBININGCHARS) pindex(NOCOMBININGCHARS) cindex(characters, (Unicode) combining) cindex(combining characters (Unicode)) cindex(Unicode combining characters) item(tt(COMBINING_CHARS))( Assume that the terminal displays combining characters correctly. Specifically, if a base alphanumeric character is followed by one or more zero-width punctuation characters, assume that the zero-width characters will be displayed as modifications to the base character within the same width. Not all terminals handle this. If this option is not set, zero-width characters are displayed separately with special mark-up. If this option is set, the pattern test tt([[:WORD:]]) matches a zero-width punctuation character on the assumption that it will be used as part of a word in combination with a word character. Otherwise the base shell does not handle combining characters specially. ) pindex(EMACS) pindex(NO_EMACS) pindex(NOEMACS) item(tt(EMACS))( If ZLE is loaded, turning on this option has the equivalent effect of `tt(bindkey -e)'. In addition, the VI option is unset. Turning it off has no effect. The option setting is not guaranteed to reflect the current keymap. This option is provided for compatibility; tt(bindkey) is the recommended interface. ) pindex(OVERSTRIKE) pindex(NO_OVERSTRIKE) pindex(NOOVERSTRIKE) cindex(editor, overstrike mode) cindex(overstrike mode, of editor) item(tt(OVERSTRIKE))( Start up the line editor in overstrike mode. ) pindex(SINGLE_LINE_ZLE) pindex(NO_SINGLE_LINE_ZLE) pindex(SINGLELINEZLE) pindex(NOSINGLELINEZLE) cindex(editor, single line mode) item(tt(SINGLE_LINE_ZLE) (tt(-M)) )( Use single-line command line editing instead of multi-line. Note that although this is on by default in ksh emulation it only provides superficial compatibility with the ksh line editor and reduces the effectiveness of the zsh line editor. As it has no effect on shell syntax, many users may wish to disable this option when using ksh emulation interactively. ) pindex(VI) pindex(NO_VI) pindex(NOVI) item(tt(VI))( If ZLE is loaded, turning on this option has the equivalent effect of `tt(bindkey -v)'. In addition, the EMACS option is unset. Turning it off has no effect. The option setting is not guaranteed to reflect the current keymap. This option is provided for compatibility; tt(bindkey) is the recommended interface. ) pindex(ZLE) pindex(NO_ZLE) pindex(NOZLE) cindex(editor, enabling) cindex(enabling the editor) item(tt(ZLE) (tt(-Z)))( Use the zsh line editor. Set by default in interactive shells connected to a terminal. ) enditem() texinode(Option Aliases)(Single Letter Options)(Description of Options)(Options) sect(Option Aliases) cindex(options, aliases) Some options have alternative names. These aliases are never used for output, but can be used just like normal option names when specifying options to the shell. startitem() pindex(BRACE_EXPAND) pindex(NO_BRACE_EXPAND) pindex(BRACEEXPAND) pindex(NOBRACEEXPAND) item(tt(BRACE_EXPAND))( em(NO_)tt(IGNORE_BRACES) (ksh and bash compatibility) ) pindex(DOT_GLOB) pindex(NO_DOT_GLOB) pindex(DOTGLOB) pindex(NODOTGLOB) item(tt(DOT_GLOB))( tt(GLOB_DOTS) (bash compatibility) ) pindex(HASH_ALL) pindex(NO_HASH_ALL) pindex(HASHALL) pindex(NOHASHALL) item(tt(HASH_ALL))( tt(HASH_CMDS) (bash compatibility) ) pindex(HIST_APPEND) pindex(NO_HIST_APPEND) pindex(HISTAPPEND) pindex(NOHISTAPPEND) item(tt(HIST_APPEND))( tt(APPEND_HISTORY) (bash compatibility) ) pindex(HIST_EXPAND) pindex(NO_HIST_EXPAND) pindex(HISTEXPAND) pindex(NOHISTEXPAND) item(tt(HIST_EXPAND))( tt(BANG_HIST) (bash compatibility) ) pindex(LOG) pindex(NO_LOG) pindex(NOLOG) item(tt(LOG))( em(NO_)tt(HIST_NO_FUNCTIONS) (ksh compatibility) ) pindex(MAIL_WARN) pindex(NO_MAIL_WARN) pindex(MAILWARN) pindex(NOMAILWARN) item(tt(MAIL_WARN))( tt(MAIL_WARNING) (bash compatibility) ) pindex(ONE_CMD) pindex(NO_ONE_CMD) pindex(ONECMD) pindex(NOONECMD) item(tt(ONE_CMD))( tt(SINGLE_COMMAND) (bash compatibility) ) pindex(PHYSICAL) pindex(NO_PHYSICAL) pindex(NOPHYSICAL) item(tt(PHYSICAL))( tt(CHASE_LINKS) (ksh and bash compatibility) ) pindex(PROMPT_VARS) pindex(NO_PROMPT_VARS) pindex(PROMPTVARS) pindex(NOPROMPTVARS) item(tt(PROMPT_VARS))( tt(PROMPT_SUBST) (bash compatibility) ) pindex(STDIN) pindex(NO_STDIN) pindex(NOSTDIN) item(tt(STDIN))( tt(SHIN_STDIN) (ksh compatibility) ) pindex(TRACK_ALL) pindex(NO_TRACK_ALL) pindex(TRACKALL) pindex(NOTRACKALL) item(tt(TRACK_ALL))( tt(HASH_CMDS) (ksh compatibility) ) enditem() texinode(Single Letter Options)()(Option Aliases)(Options) sect(Single Letter Options) cindex(options, single letter) cindex(single letter options) subsect(Default set) startsitem() sitem(tt(-0))(CORRECT) sitem(tt(-1))(PRINT_EXIT_VALUE) sitem(tt(-2))(em(NO_)BAD_PATTERN) sitem(tt(-3))(em(NO_)NOMATCH) sitem(tt(-4))(GLOB_DOTS) sitem(tt(-5))(NOTIFY) sitem(tt(-6))(BG_NICE) sitem(tt(-7))(IGNORE_EOF) sitem(tt(-8))(MARK_DIRS) sitem(tt(-9))(AUTO_LIST) sitem(tt(-B))(em(NO_)BEEP) sitem(tt(-C))(em(NO_)CLOBBER) sitem(tt(-D))(PUSHD_TO_HOME) sitem(tt(-E))(PUSHD_SILENT) sitem(tt(-F))(em(NO_)GLOB) sitem(tt(-G))(NULL_GLOB) sitem(tt(-H))(RM_STAR_SILENT) sitem(tt(-I))(IGNORE_BRACES) sitem(tt(-J))(AUTO_CD) sitem(tt(-K))(em(NO_)BANG_HIST) sitem(tt(-L))(SUN_KEYBOARD_HACK) sitem(tt(-M))(SINGLE_LINE_ZLE) sitem(tt(-N))(AUTO_PUSHD) sitem(tt(-O))(CORRECT_ALL) sitem(tt(-P))(RC_EXPAND_PARAM) sitem(tt(-Q))(PATH_DIRS) sitem(tt(-R))(LONG_LIST_JOBS) sitem(tt(-S))(REC_EXACT) sitem(tt(-T))(CDABLE_VARS) sitem(tt(-U))(MAIL_WARNING) sitem(tt(-V))(em(NO_)PROMPT_CR) sitem(tt(-W))(AUTO_RESUME) sitem(tt(-X))(LIST_TYPES) sitem(tt(-Y))(MENU_COMPLETE) sitem(tt(-Z))(ZLE) sitem(tt(-a))(ALL_EXPORT) sitem(tt(-e))(ERR_EXIT) sitem(tt(-f))(em(NO_)RCS) sitem(tt(-g))(HIST_IGNORE_SPACE) sitem(tt(-h))(HIST_IGNORE_DUPS) sitem(tt(-i))(INTERACTIVE) sitem(tt(-k))(INTERACTIVE_COMMENTS) sitem(tt(-l))(LOGIN) sitem(tt(-m))(MONITOR) sitem(tt(-n))(em(NO_)EXEC) sitem(tt(-p))(PRIVILEGED) sitem(tt(-r))(RESTRICTED) sitem(tt(-s))(SHIN_STDIN) sitem(tt(-t))(SINGLE_COMMAND) sitem(tt(-u))(em(NO_)UNSET) sitem(tt(-v))(VERBOSE) sitem(tt(-w))(CHASE_LINKS) sitem(tt(-x))(XTRACE) sitem(tt(-y))(SH_WORD_SPLIT) endsitem() subsect(sh/ksh emulation set) startsitem() sitem(tt(-C))(em(NO_)CLOBBER) sitem(tt(-T))(TRAPS_ASYNC) sitem(tt(-X))(MARK_DIRS) sitem(tt(-a))(ALL_EXPORT) sitem(tt(-b))(NOTIFY) sitem(tt(-e))(ERR_EXIT) sitem(tt(-f))(em(NO_)GLOB) sitem(tt(-i))(INTERACTIVE) sitem(tt(-l))(LOGIN) sitem(tt(-m))(MONITOR) sitem(tt(-n))(em(NO_)EXEC) sitem(tt(-p))(PRIVILEGED) sitem(tt(-r))(RESTRICTED) sitem(tt(-s))(SHIN_STDIN) sitem(tt(-t))(SINGLE_COMMAND) sitem(tt(-u))(em(NO_)UNSET) sitem(tt(-v))(VERBOSE) sitem(tt(-x))(XTRACE) endsitem() subsect(Also note) startsitem() sitem(tt(-A))(Used by tt(set) for setting arrays) sitem(tt(-b))(Used on the command line to specify end of option processing) sitem(tt(-c))(Used on the command line to specify a single command) sitem(tt(-m))(Used by tt(setopt) for pattern-matching option setting) sitem(tt(-o))(Used in all places to allow use of long option names) sitem(tt(-s))(Used by tt(set) to sort positional parameters) endsitem()