* type -m doesn't work @ 1996-05-30 13:21 Vinnie Shelton [not found] ` <shelton@icd.teradyne.com> 0 siblings, 1 reply; 10+ messages in thread From: Vinnie Shelton @ 1996-05-30 13:21 UTC (permalink / raw) To: zsh-workers In an unpatched beta19, "type -m" doesn't work: : ~ Thu 30 8:56; type -m 'zsh*' zsh is /pd/osbin/ zsh.old is /pd/osbin/ zsh-2.6-beta10 is /pd/osbin/ zsh-2.6-beta11 is /pd/osbin/ zsh-2.6-beta13 is /pd/osbin/ zsh-2.6-beta15 is /pd/osbin/ zsh-2.6-beta16 is /pd/osbin/ zsh-2.6-beta18 is /pd/osbin/ zsh-2.6-beta19 is /pd/osbin/ This is true under SunOS 4.1.3, Solaris 2.5 and UnixWare 1.4. In each case, I built with --enable-zsh-mem, (in case it matters). --vin --JAA28902.833462548/steadfast.teradyne.com-- ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <shelton@icd.teradyne.com>]
* beta19, SunOS 4.1.3_U1 and nawk @ 1996-05-23 20:53 ` Vinnie Shelton 1996-05-24 10:30 ` Peter A. Newson 0 siblings, 1 reply; 10+ messages in thread From: Vinnie Shelton @ 1996-05-23 20:53 UTC (permalink / raw) To: zsh-workers Beta19 using nawk on SunOS 4.1.3_U1 generates an invalid signames.h file. All the #else's are turned into else's. After patching up signames.h, everything built fine. --vin ^ permalink raw reply [flat|nested] 10+ messages in thread
* beta19, SunOS 4.1.3_U1 and nawk 1996-05-23 20:53 ` beta19, SunOS 4.1.3_U1 and nawk Vinnie Shelton @ 1996-05-24 10:30 ` Peter A. Newson 1996-05-24 11:11 ` Peter A. Newson 1996-05-24 11:12 ` Andreas Koenig 0 siblings, 2 replies; 10+ messages in thread From: Peter A. Newson @ 1996-05-24 10:30 UTC (permalink / raw) To: zsh-workers >Beta19 using nawk on SunOS 4.1.3_U1 generates an invalid signames.h >file. All the #else's are turned into else's. > It built with no probs for me on the same system. Pete ^ permalink raw reply [flat|nested] 10+ messages in thread
* beta19, SunOS 4.1.3_U1 and nawk 1996-05-24 10:30 ` Peter A. Newson @ 1996-05-24 11:11 ` Peter A. Newson 1996-05-24 11:12 ` Andreas Koenig 1 sibling, 0 replies; 10+ messages in thread From: Peter A. Newson @ 1996-05-24 11:11 UTC (permalink / raw) To: zsh-workers Whoops, sorry Vin. I forgot I have gawk installed. After applying Zoltan's patch, signames.h is generated correctly using either gawk or nawk. Pete ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: beta19, SunOS 4.1.3_U1 and nawk 1996-05-24 10:30 ` Peter A. Newson 1996-05-24 11:11 ` Peter A. Newson @ 1996-05-24 11:12 ` Andreas Koenig 1 sibling, 0 replies; 10+ messages in thread From: Andreas Koenig @ 1996-05-24 11:12 UTC (permalink / raw) To: pete; +Cc: zsh-workers >>Beta19 using nawk on SunOS 4.1.3_U1 generates an invalid signames.h >>file. All the #else's are turned into else's. >> >It built with no probs for me on the same system. The NeXT 3.2 also has an awk that loses the hashmark in front of the else. NeXT's awk is very old and slow and there's no nawk available in the standard OS. Sorry, can't dig any deeper, andreas ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: type -m doesn't work [not found] ` <shelton@icd.teradyne.com> 1996-05-23 20:53 ` beta19, SunOS 4.1.3_U1 and nawk Vinnie Shelton @ 1996-05-30 14:43 ` Bart Schaefer 1996-10-03 19:47 ` list-choices Bart Schaefer 2 siblings, 0 replies; 10+ messages in thread From: Bart Schaefer @ 1996-05-30 14:43 UTC (permalink / raw) To: acs, zsh-workers On May 30, 9:21am, Vinnie Shelton wrote: } Subject: type -m doesn't work } } In an unpatched beta19, "type -m" doesn't work: } } : ~ Thu 30 8:56; type -m 'zsh*' } zsh is /pd/osbin/ } zsh.old is /pd/osbin/ } zsh-2.6-beta10 is /pd/osbin/ } zsh-2.6-beta11 is /pd/osbin/ } zsh-2.6-beta13 is /pd/osbin/ } zsh-2.6-beta15 is /pd/osbin/ } zsh-2.6-beta16 is /pd/osbin/ } zsh-2.6-beta18 is /pd/osbin/ } zsh-2.6-beta19 is /pd/osbin/ It's a metafication problem, I think; here's what I get on linux: zagzig% type -m z\* zdump is /usr/sbin/\M-P\M-_^E^Hx\M-L^E^HP\M-[^E^H zmail is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zipsplit is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zcat is /bin/\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zmore is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H znew is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zdiff is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zipgrep is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zipinfo is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zgv is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zipcloak is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zic is /usr/sbin/\M-P\M-_^E^Hx\M-L^E^HP\M-[^E^H zip is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H zforce is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zgrep is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zcmp is /usr/bin/\M-`\M-_^E^H\M-x\M-O^E^H zipnote is /usr/local/bin/@\M-[^E^H\M-^@\M-L^E^H\M-`\M-_^E^H\M-x\M-O^E^H -- Bart Schaefer Brass Lantern Enterprises http://www.well.com/user/barts http://www.nbn.com/people/lantern New male in /home/schaefer: >N 2 Justin William Schaefer Sat May 11 03:43 53/4040 "Happy Birthday" ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: list-choices [not found] ` <shelton@icd.teradyne.com> 1996-05-23 20:53 ` beta19, SunOS 4.1.3_U1 and nawk Vinnie Shelton 1996-05-30 14:43 ` type -m doesn't work Bart Schaefer @ 1996-10-03 19:47 ` Bart Schaefer 1996-10-03 20:27 ` list-choices Vinnie Shelton 1996-10-03 20:57 ` list-choices Zefram 2 siblings, 2 replies; 10+ messages in thread From: Bart Schaefer @ 1996-10-03 19:47 UTC (permalink / raw) To: acs, zsh-list On Oct 3, 2:12pm, Vinnie Shelton wrote: > Subject: list-choices > If I use automenu to complete a directory, how do I list the choices under > that directory? I thought ^D would work, and then I tried ESC ^D, but > still no joy. [...] > I want to accept the current selection and move to the next layer down - Amazing as it may seem, you want slash (/), or any other character that interrupts the menu cycle, and then ctrl-D. delete-char-or-list no longer interrupts menu cycles (I don't recall how long this has been true). If you have autoremoveslash set, typing a slash will interrupt the cycle without actually adding a slash to the command line (this didn't work in earlier versions; you used to get two slashes), and you can then proceed with listing or whatever. The way *I'd* really like it to work is for delete-char-or-list to show me what's below abc/, but then continue cycling through the original menu completion. That is, % vi ab<TAB> abc abd % vi ab<TAB> <-- Tab again to trigger automenu % vi abc/<C-D> <-- Hmm, show me what's in that directory aaa bbb ccc <-- Wrong, I wanted the directory containing "eee" % vi abc/<TAB> <-- Keep cycling the menu that autolist showed me % vi abd/<C-D> <-- Now show me what's in THAT directory ddd eee fff <-- Ok, abd/ is is the right one! % vi abd/e<TAB> <-- So now I can complete what I really wanted % vi abd/eee This seems to me to be somewhat more useful than having C-D show the menu that is already in progress, which is the behavior right now, and FAR more useful than having to interrupt the menu cycle and start over after finding out that your first guess was wrong. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: list-choices 1996-10-03 19:47 ` list-choices Bart Schaefer @ 1996-10-03 20:27 ` Vinnie Shelton 1996-10-03 20:57 ` list-choices Zefram 1 sibling, 0 replies; 10+ messages in thread From: Vinnie Shelton @ 1996-10-03 20:27 UTC (permalink / raw) To: schaefer; +Cc: zsh-list schaefer@candle.brasslantern.com said: > If you have autoremoveslash set, typing a slash will interrupt the > cycle without actually adding a slash to the command line (this > didn't work in earlier versions; you used to get two slashes), and > you can then proceed with listing or whatever. That's pretty cool. Silently absorbing the slash is probably a little mysterious to new users, but I LIKE IT! > The way *I'd* really like it to work is for delete-char-or-list to > show me what's below abc/, but then continue cycling through the > original menu completion. I, too, think this would be best. I thought it once worked that way, but I tried out 2.6-beta10, and the behavior was the same as now. Thanks. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: list-choices 1996-10-03 19:47 ` list-choices Bart Schaefer 1996-10-03 20:27 ` list-choices Vinnie Shelton @ 1996-10-03 20:57 ` Zefram 1 sibling, 0 replies; 10+ messages in thread From: Zefram @ 1996-10-03 20:57 UTC (permalink / raw) To: schaefer; +Cc: acs, zsh-workers >> I want to accept the current selection and move to the next layer down - > >Amazing as it may seem, you want slash (/), or any other character that >interrupts the menu cycle, and then ctrl-D. delete-char-or-list no longer >interrupts menu cycles (I don't recall how long this has been true). 2.6-beta12. One of my favourite new features, actually. >The way *I'd* really like it to work is for delete-char-or-list to show >me what's below abc/, but then continue cycling through the original menu >completion. That is, ... >This seems to me to be somewhat more useful than having C-D show the menu >that is already in progress, which is the behavior right now, and FAR more >useful than having to interrupt the menu cycle and start over after finding >out that your first guess was wrong. That sounds like a very nice thing to have. (In fact, there's already some code for execute-named-command that displays a temporary list while a menu completion may already be in progress -- this could be moved into a separate function in zle_tricky.c and made a bit more complete in order to implement this feature.) But I wouldn't want this sort of listing to be on the usual list-choices etc. keys: it's useful to be able to explicitly display the list one is menuing through. It would have to be a new command. -zefram ^ permalink raw reply [flat|nested] 10+ messages in thread
* list-choices @ 1996-10-03 18:12 Vinnie Shelton 0 siblings, 0 replies; 10+ messages in thread From: Vinnie Shelton @ 1996-10-03 18:12 UTC (permalink / raw) To: zsh-list If I use automenu to complete a directory, how do I list the choices under that directory? I thought ^D would work, and then I tried ESC ^D, but still no joy. For example: : ~/foo Thu 3 14:02; zsh -f spacely% echo $ZSH_VERSION 3.0.1-test2 spacely% uname -a SunOS spacely 5.5 Generic sun4m sparc SUNW,SPARCstation-5 spacely% ls -R .: abc abd ./abc: aaa bbb ccc ./abd: spacely% setopt automenu autolist spacely% ls ab<TAB> abc abd <TAB> again yields: spacely% ls abc/ Now if I press ^D or "ESC ^D", I get: abc abd I want to accept the current selection and move to the next layer down - I want the choices listed to be "aaa bbb ccc". I thought delete-char-or-list used to do what I want, but I can't reproduce the desired behavior. TIA, Vin Shelton ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~1996-10-03 21:08 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 1996-05-30 13:21 type -m doesn't work Vinnie Shelton [not found] ` <shelton@icd.teradyne.com> 1996-05-23 20:53 ` beta19, SunOS 4.1.3_U1 and nawk Vinnie Shelton 1996-05-24 10:30 ` Peter A. Newson 1996-05-24 11:11 ` Peter A. Newson 1996-05-24 11:12 ` Andreas Koenig 1996-05-30 14:43 ` type -m doesn't work Bart Schaefer 1996-10-03 19:47 ` list-choices Bart Schaefer 1996-10-03 20:27 ` list-choices Vinnie Shelton 1996-10-03 20:57 ` list-choices Zefram 1996-10-03 18:12 list-choices Vinnie Shelton
Code repositories for project(s) associated with this public inbox https://git.vuxu.org/mirror/zsh/ This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).