* [9fans] Reboot during kernel initiation (Live CD)
@ 2007-06-25 8:39 erichaase
2007-06-25 9:04 ` Lucio De Re
0 siblings, 1 reply; 2+ messages in thread
From: erichaase @ 2007-06-25 8:39 UTC (permalink / raw)
To: 9fans
Hello all,
I'm trying to get Plan 9 running on an old system I have laying
around and I'm having a problem. Whenever I boot using the Live CD
(using both options: live cd and install) my system reboots during the
kernel initiation phase. Here is a log of the text that scrolls by
during bootup:
found 9pccd.gz
.gz............................
[more text scrolls by here]
#10: elnk3: 10Mbps ...
256M memory: ...
My system always reboots after the "256M memory" line is printed and
I figure its because of a hardware incompatibility issue but I can't
seem to figure out which piece of hardware is causing the problem.
Here is the lspci (Linux) output on this system:
0000:00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/
DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA
(rev 02)
0000:00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
(rev 01)
0000:00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB
(rev 01)
0000:00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev
02)
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c900B-TPC
Etherlink XL [Cyclone] (rev 04)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA
TNT2/TNT2 Pro] (rev 11)
I've used the same CD to successfully boot a different system so I
know the problem isn't the CD. I'm running out of ideas and would
appreciate any type of feedback. Thanks in advance!
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [9fans] Reboot during kernel initiation (Live CD)
2007-06-25 8:39 [9fans] Reboot during kernel initiation (Live CD) erichaase
@ 2007-06-25 9:04 ` Lucio De Re
0 siblings, 0 replies; 2+ messages in thread
From: Lucio De Re @ 2007-06-25 9:04 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
On Mon, 2007-06-25 at 08:39 +0000, erichaase@gmail.com wrote:
> Hello all,
>
> I'm trying to get Plan 9 running on an old system I have laying
> around and I'm having a problem. Whenever I boot using the Live CD
> (using both options: live cd and install) my system reboots during the
> kernel initiation phase. Here is a log of the text that scrolls by
> during bootup:
>
> found 9pccd.gz
> .gz............................
> [more text scrolls by here]
> #10: elnk3: 10Mbps ...
> 256M memory: ...
>
I'd figure ACPI (lack of), but I can't check. I do have a host that has
no ACPI capabilities and I successfully booted NetBSD through the right
incantations. I didn't get Linux to boot, but I did not try very hard.
Plan 9 also failed and I no longer recall what shape the failure took.
++L
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-06-25 9:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-06-25 8:39 [9fans] Reboot during kernel initiation (Live CD) erichaase
2007-06-25 9:04 ` Lucio De Re
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).