* [9fans] mimicking Plan 9 paper style with LaTeX?
@ 2006-10-30 13:25 Axel Belinfante
2006-10-30 13:28 ` erik quanstrom
2006-10-30 14:11 ` arisawa
0 siblings, 2 replies; 14+ messages in thread
From: Axel Belinfante @ 2006-10-30 13:25 UTC (permalink / raw)
To: 9fans
any known recipes to make a LaTeX document
'visually similar to the Plan 9 papers'
of /sys/doc/9 ?
Axel.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 13:25 [9fans] mimicking Plan 9 paper style with LaTeX? Axel Belinfante
@ 2006-10-30 13:28 ` erik quanstrom
2006-10-30 13:51 ` andrey mirtchovski
2006-10-30 14:11 ` arisawa
1 sibling, 1 reply; 14+ messages in thread
From: erik quanstrom @ 2006-10-30 13:28 UTC (permalink / raw)
To: 9fans
i would think it would be easier to do that TeX directly.
- erik
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 13:28 ` erik quanstrom
@ 2006-10-30 13:51 ` andrey mirtchovski
0 siblings, 0 replies; 14+ messages in thread
From: andrey mirtchovski @ 2006-10-30 13:51 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
to get the font used in the p9 papers try the following command in
your prologue:
\renewcommand{\familydefault}{\sfdefault}
the chapter numbering will require a style change but i don't know it
yet. i'll let you know if i figure it out.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 13:25 [9fans] mimicking Plan 9 paper style with LaTeX? Axel Belinfante
2006-10-30 13:28 ` erik quanstrom
@ 2006-10-30 14:11 ` arisawa
2006-10-30 15:01 ` Axel Belinfante
2006-10-30 23:58 ` arisawa
1 sibling, 2 replies; 14+ messages in thread
From: arisawa @ 2006-10-30 14:11 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 166 bytes --]
Hello,
> any known recipes to make a LaTeX document
> 'visually similar to the Plan 9 papers'
> of /sys/doc/9 ?
>
Mine is, substitutiong "article.cls" by
[-- Attachment #2: p9article.cls --]
[-- Type: application/octet-stream, Size: 20926 bytes --]
%%
%% This is file `article.cls',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% classes.dtx (with options: `article')
%%
%% This is a generated file.
%%
%% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001
%% The LaTeX3 Project and any individual authors listed elsewhere
%% in this file.
%%
%% This file was generated from file(s) of the LaTeX base system.
%% --------------------------------------------------------------
%%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.2
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.2 or later is part of all distributions of LaTeX
%% version 1999/12/01 or later.
%%
%% This file may only be distributed together with a copy of the LaTeX
%% base system. You may however distribute the LaTeX base system without
%% such generated files.
%%
%% The list of all files belonging to the LaTeX base distribution is
%% given in the file `manifest.txt'. See also `legal.txt' for additional
%% information.
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%% Digits \0\1\2\3\4\5\6\7\8\9
%% Exclamation \! Double quote \" Hash (number) \#
%% Dollar \$ Percent \% Ampersand \&
%% Acute accent \' Left paren \( Right paren \)
%% Asterisk \* Plus \+ Comma \,
%% Minus \- Point \. Solidus \/
%% Colon \: Semicolon \; Less than \<
%% Equals \= Greater than \> Question mark \?
%% Commercial at \@ Left bracket \[ Backslash \\
%% Right bracket \] Circumflex \^ Underscore \_
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
\NeedsTeXFormat{LaTeX2e}[1995/12/01]
\ProvidesClass{article}
[2001/04/21 v1.4e
Standard LaTeX document class]
\newcommand\@ptsize{}
\newif\if@restonecol
\newif\if@titlepage
\@titlepagefalse
\if@compatibility\else
\DeclareOption{a4paper}
{\setlength\paperheight {297mm}%
\setlength\paperwidth {210mm}}
\DeclareOption{a5paper}
{\setlength\paperheight {210mm}%
\setlength\paperwidth {148mm}}
\DeclareOption{b5paper}
{\setlength\paperheight {250mm}%
\setlength\paperwidth {176mm}}
\DeclareOption{letterpaper}
{\setlength\paperheight {11in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{legalpaper}
{\setlength\paperheight {14in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{executivepaper}
{\setlength\paperheight {10.5in}%
\setlength\paperwidth {7.25in}}
\DeclareOption{landscape}
{\setlength\@tempdima {\paperheight}%
\setlength\paperheight {\paperwidth}%
\setlength\paperwidth {\@tempdima}}
\fi
\if@compatibility
\renewcommand\@ptsize{0}
\else
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\fi
\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
\if@compatibility\else
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\fi
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\if@compatibility\else
\DeclareOption{final}{\setlength\overfullrule{0pt}}
\fi
\DeclareOption{titlepage}{\@titlepagetrue}
\if@compatibility\else
\DeclareOption{notitlepage}{\@titlepagefalse}
\fi
\if@compatibility\else
\DeclareOption{onecolumn}{\@twocolumnfalse}
\fi
\DeclareOption{twocolumn}{\@twocolumntrue}
\DeclareOption{leqno}{\input{leqno.clo}}
\DeclareOption{fleqn}{\input{fleqn.clo}}
\DeclareOption{openbib}{%
\AtEndOfPackage{%
\renewcommand\@openbib@code{%
\advance\leftmargin\bibindent
\itemindent -\bibindent
\listparindent \itemindent
\parsep \z@
}%
\renewcommand\newblock{\par}}%
}
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
\ProcessOptions
\input{size1\@ptsize.clo}
\setlength\lineskip{1\p@}
\setlength\normallineskip{1\p@}
\renewcommand\baselinestretch{}
\setlength\parskip{0\p@ \@plus \p@}
\@lowpenalty 51
\@medpenalty 151
\@highpenalty 301
\setcounter{topnumber}{2}
\renewcommand\topfraction{.7}
\setcounter{bottomnumber}{1}
\renewcommand\bottomfraction{.3}
\setcounter{totalnumber}{3}
\renewcommand\textfraction{.2}
\renewcommand\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\renewcommand\dbltopfraction{.7}
\renewcommand\dblfloatpagefraction{.5}
\if@twoside
\def\ps@headings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection\quad
\fi
##1}}{}}%
\def\subsectionmark##1{%
\markright {%
\ifnum \c@secnumdepth >\@ne
\thesubsection\quad
\fi
##1}}}
\else
\def\ps@headings{%
\let\@oddfoot\@empty
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
\thesection\quad
\fi
##1}}}}
\fi
\def\ps@myheadings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\@gobbletwo
\let\sectionmark\@gobble
\let\subsectionmark\@gobble
}
\if@titlepage
\newcommand\maketitle{\begin{titlepage}%
\let\footnotesize\small
\let\footnoterule\relax
\let \footnote \thanks
\null\vfil
\vskip 60\p@
\begin{center}%
{\LARGE \@title \par}%
\vskip 3em%
{\large
\lineskip .75em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1.5em%
{\large \@date \par}% % Set date in \large size.
\end{center}\par
\@thanks
\vfil\null
\end{titlepage}%
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\else
\newcommand\maketitle{\par
\begingroup
\renewcommand\thefootnote{\@fnsymbol\c@footnote}%
\def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
\long\def\@makefntext##1{\parindent 1em\noindent
\hb@xt@1.8em{%
\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
\if@twocolumn
\ifnum \col@number=\@ne
\@maketitle
\else
\twocolumn[\@maketitle]%
\fi
\else
\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle
\fi
\thispagestyle{plain}\@thanks
\endgroup
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\def\@maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\LARGE \@title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1em%
{\large \@date}%
\end{center}%
\par
\vskip 1.5em}
\fi
\setcounter{secnumdepth}{3}
\newcounter {part}
\newcounter {section}
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
\renewcommand \thepart {\@Roman\c@part}
\renewcommand \thesection {\@arabic\c@section.}
\renewcommand\thesubsection {\thesection\@arabic\c@subsection.}
\renewcommand\thesubsubsection{\thesubsection \@arabic\c@subsubsection.}
\renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph}
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
\newcommand\part{%
\if@noskipsec \leavevmode \fi
\par
\addvspace{4ex}%
\@afterindentfalse
\secdef\@part\@spart}
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >\m@ne
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\ifnum \c@secnumdepth >\m@ne
\Large\bfseries \partname\nobreakspace\thepart
\par\nobreak
\fi
\huge \bfseries #2%
\markboth{}{}\par}%
\nobreak
\vskip 3ex
\@afterheading}
\def\@spart#1{%
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\huge \bfseries #1\par}%
\nobreak
\vskip 3ex
\@afterheading}
\newcommand\section{\@startsection {section}{1}{\z@}%
{-3.5ex \@plus -1ex \@minus -.2ex}%
{2.3ex \@plus.2ex}%
{\sf\large\bfseries}}
\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.5ex \@plus .2ex}%
{\normalfont \normalsize\bfseries}}
\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.5ex \@plus .2ex}%
{\normalfont\normalsize\bfseries}}
\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
{3.25ex \@plus1ex \@minus.2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
{3.25ex \@plus1ex \@minus .2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\if@twocolumn
\setlength\leftmargini {2em}
\else
\setlength\leftmargini {2.5em}
\fi
\leftmargin \leftmargini
\setlength\leftmarginii {2.2em}
\setlength\leftmarginiii {1.87em}
\setlength\leftmarginiv {1.7em}
\if@twocolumn
\setlength\leftmarginv {.5em}
\setlength\leftmarginvi {.5em}
\else
\setlength\leftmarginv {1em}
\setlength\leftmarginvi {1em}
\fi
\setlength \labelsep {.5em}
\setlength \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
\@beginparpenalty -\@lowpenalty
\@endparpenalty -\@lowpenalty
\@itempenalty -\@lowpenalty
\renewcommand\theenumi{\@arabic\c@enumi}
\renewcommand\theenumii{\@alph\c@enumii}
\renewcommand\theenumiii{\@roman\c@enumiii}
\renewcommand\theenumiv{\@Alph\c@enumiv}
\newcommand\labelenumi{\theenumi.}
\newcommand\labelenumii{(\theenumii)}
\newcommand\labelenumiii{\theenumiii.}
\newcommand\labelenumiv{\theenumiv.}
\renewcommand\p@enumii{\theenumi}
\renewcommand\p@enumiii{\theenumi(\theenumii)}
\renewcommand\p@enumiv{\p@enumiii\theenumiii}
\newcommand\labelitemi{\textbullet}
\newcommand\labelitemii{\normalfont\bfseries \textendash}
\newcommand\labelitemiii{\textasteriskcentered}
\newcommand\labelitemiv{\textperiodcentered}
\newenvironment{description}
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
{\endlist}
\newcommand*\descriptionlabel[1]{\hspace\labelsep
\normalfont\bfseries #1}
\if@titlepage
\newenvironment{abstract}{%
\titlepage
\null\vfil
\@beginparpenalty\@lowpenalty
\begin{center}%
\bfseries \abstractname
\@endparpenalty\@M
\end{center}}%
{\par\vfil\null\endtitlepage}
\else
\newenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\small
\begin{center}%
{\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
\end{center}%
\quotation
\fi}
{\if@twocolumn\else\endquotation\fi}
\fi
\newenvironment{verse}
{\let\\\@centercr
\list{}{\itemsep \z@
\itemindent -1.5em%
\listparindent\itemindent
\rightmargin \leftmargin
\advance\leftmargin 1.5em}%
\item\relax}
{\endlist}
\newenvironment{quotation}
{\list{}{\listparindent 1.5em%
\itemindent \listparindent
\rightmargin \leftmargin
\parsep \z@ \@plus\p@}%
\item\relax}
{\endlist}
\newenvironment{quote}
{\list{}{\rightmargin\leftmargin}%
\item\relax}
{\endlist}
\if@compatibility
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\z@
}%
{\if@restonecol\twocolumn \else \newpage \fi
}
\else
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\@ne
}%
{\if@restonecol\twocolumn \else \newpage \fi
\if@twoside\else
\setcounter{page}\@ne
\fi
}
\fi
\newcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\gdef\thesection{\@Alph\c@section}}
\setlength\arraycolsep{5\p@}
\setlength\tabcolsep{6\p@}
\setlength\arrayrulewidth{.4\p@}
\setlength\doublerulesep{2\p@}
\setlength\tabbingsep{\labelsep}
\skip\@mpfootins = \skip\footins
\setlength\fboxsep{3\p@}
\setlength\fboxrule{.4\p@}
\renewcommand \theequation {\@arabic\c@equation}
\newcounter{figure}
\renewcommand \thefigure {\@arabic\c@figure}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{\figurename\nobreakspace\thefigure}
\newenvironment{figure}
{\@float{figure}}
{\end@float}
\newenvironment{figure*}
{\@dblfloat{figure}}
{\end@dblfloat}
\newcounter{table}
\renewcommand\thetable{\@arabic\c@table}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{\tablename\nobreakspace\thetable}
\newenvironment{table}
{\@float{table}}
{\end@float}
\newenvironment{table*}
{\@dblfloat{table}}
{\end@dblfloat}
\newlength\abovecaptionskip
\newlength\belowcaptionskip
\setlength\abovecaptionskip{10\p@}
\setlength\belowcaptionskip{0\p@}
\long\def\@makecaption#1#2{%
\vskip\abovecaptionskip
\sbox\@tempboxa{#1: #2}%
\ifdim \wd\@tempboxa >\hsize
#1: #2\par
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip}
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
\newcommand\@pnumwidth{1.55em}
\newcommand\@tocrmarg{2.55em}
\newcommand\@dotsep{4.5}
\setcounter{tocdepth}{3}
\newcommand\tableofcontents{%
\section*{\contentsname
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
\@starttoc{toc}%
}
\newcommand*\l@part[2]{%
\ifnum \c@tocdepth >-2\relax
\addpenalty\@secpenalty
\addvspace{2.25em \@plus\p@}%
\setlength\@tempdima{3em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
{\leavevmode
\large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
\nobreak
\if@compatibility
\global\@nobreaktrue
\everypar{\global\@nobreakfalse\everypar{}}%
\fi
\endgroup
\fi}
\newcommand*\l@section[2]{%
\ifnum \c@tocdepth >\z@
\addpenalty\@secpenalty
\addvspace{1.0em \@plus\p@}%
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\leavevmode \bfseries
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
\endgroup
\fi}
\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
\newcommand\listoffigures{%
\section*{\listfigurename}%
\@mkboth{\MakeUppercase\listfigurename}%
{\MakeUppercase\listfigurename}%
\@starttoc{lof}%
}
\newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
\newcommand\listoftables{%
\section*{\listtablename}%
\@mkboth{%
\MakeUppercase\listtablename}%
{\MakeUppercase\listtablename}%
\@starttoc{lot}%
}
\let\l@table\l@figure
\newdimen\bibindent
\setlength\bibindent{1.5em}
\newenvironment{thebibliography}[1]
{\section*{\refname}%
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}%
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\@openbib@code
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
\sloppy
\clubpenalty4000
\@clubpenalty \clubpenalty
\widowpenalty4000%
\sfcode`\.\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist}
\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
\let\@openbib@code\@empty
\newenvironment{theindex}
{\if@twocolumn
\@restonecolfalse
\else
\@restonecoltrue
\fi
\columnseprule \z@
\columnsep 35\p@
\twocolumn[\section*{\indexname}]%
\@mkboth{\MakeUppercase\indexname}%
{\MakeUppercase\indexname}%
\thispagestyle{plain}\parindent\z@
\parskip\z@ \@plus .3\p@\relax
\let\item\@idxitem}
{\if@restonecol\onecolumn\else\clearpage\fi}
\newcommand\@idxitem{\par\hangindent 40\p@}
\newcommand\subitem{\@idxitem \hspace*{20\p@}}
\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
\renewcommand\footnoterule{%
\kern-3\p@
\hrule\@width.4\columnwidth
\kern2.6\p@}
\newcommand\@makefntext[1]{%
\parindent 1em%
\noindent
\hb@xt@1.8em{\hss\@makefnmark}#1}
\newcommand\contentsname{Contents}
\newcommand\listfigurename{List of Figures}
\newcommand\listtablename{List of Tables}
\newcommand\refname{References}
\newcommand\indexname{Index}
\newcommand\figurename{Figure}
\newcommand\tablename{Table}
\newcommand\partname{Part}
\newcommand\appendixname{Appendix}
\newcommand\abstractname{{\it ABSTRACT}}
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
\setlength\columnsep{10\p@}
\setlength\columnseprule{0\p@}
\pagestyle{plain}
\pagenumbering{arabic}
\if@twoside
\else
\raggedbottom
\fi
\if@twocolumn
\twocolumn
\sloppy
\flushbottom
\else
\onecolumn
\fi
\endinput
%%
%% End of file `article.cls'.
[-- Attachment #3: Type: text/plain, Size: 499 bytes --]
,
and main changes of paper document are as follows.
\documentclass[10pt]{p9article}
\textwidth 150mm
\textheight 230mm
\topmargin -11mm
\oddsidemargin 0mm
\evensidemargin 0mm
\renewcommand{\familydefault}{cmss}
\title{{\sf\Large\bfseries Pegasus} \\
{\large\bfseries --- another web server for Plan 9 ---}}
\author{\normalsize \it Kenji Arisawa, Aichi University\\
{\normalsize\tt arisawa@aichi-u.ac.jp}}
\date{}
\begin{document}
\sf
\maketitle\thispagestyle{empty}
...
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 14:11 ` arisawa
@ 2006-10-30 15:01 ` Axel Belinfante
2006-10-30 22:03 ` arisawa
2006-10-30 23:58 ` arisawa
1 sibling, 1 reply; 14+ messages in thread
From: Axel Belinfante @ 2006-10-30 15:01 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> > any known recipes to make a LaTeX document
> > 'visually similar to the Plan 9 papers'
> > of /sys/doc/9 ?
> >
>
> Mine is, substitutiong "article.cls" by
[...]
thanks, I'm trying it.
the plan 9 papers seems to use whitespace-separated
paragraphs instead of indented ones.
I'm trying to achieve that effect with additional commands in
the document; I guess it could be done in p9article.cls instead.
before the \begin{document} I add:
\setlength\parindent{0pt}
\setlength\parskip{0.25\baselineskip} % the 0.25 is just a guess
these seem not to affect the abstract,
so I also add after the \begin{abstract} :
\setlength\parindent{0pt}
\setlength\parskip{0.25\baselineskip}
\noindent
Axel.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 15:01 ` Axel Belinfante
@ 2006-10-30 22:03 ` arisawa
0 siblings, 0 replies; 14+ messages in thread
From: arisawa @ 2006-10-30 22:03 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> the plan 9 papers seems to use whitespace-separated
> paragraphs instead of indented ones.
I didn't aware that. sorry.
> \setlength\parindent{0pt}
> \setlength\parskip{0.25\baselineskip} % the 0.25 is just a guess
looks fine.
Thanks.
Kenji Arisawa
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 14:11 ` arisawa
2006-10-30 15:01 ` Axel Belinfante
@ 2006-10-30 23:58 ` arisawa
2006-11-03 11:06 ` Abhey Shah
1 sibling, 1 reply; 14+ messages in thread
From: arisawa @ 2006-10-30 23:58 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
I wrote
>
>
>> any known recipes to make a LaTeX document
>> 'visually similar to the Plan 9 papers'
>> of /sys/doc/9 ?
>>
>>
>
> Mine is, substitutiong "article.cls" by
> ...
>
But it seems that the mail has lost the following lines:
\documentclass[10pt]{p9article}
\textwidth 150mm
\textheight 230mm
\topmargin -11mm
\oddsidemargin 0mm
\evensidemargin 0mm
\usepackage{txfonts}
\renewcommand{\familydefault}{cmss}
\title{{\sf\Large\bfseries Pegasus} \\
{\large\bfseries --- another web server for Plan 9 ---}}
\author{\normalsize \it Kenji Arisawa, Aichi University\\
{\normalsize\tt arisawa@aichi-u.ac.jp}}
\date{}
\begin{document}
\sf
In addition above, the remark by Alex is helphul:
\setlength\parindent{0pt}
\setlength\parskip{0.25\baselineskip} % the 0.25 is just a guess
Kenji Arisawa
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-10-30 23:58 ` arisawa
@ 2006-11-03 11:06 ` Abhey Shah
2006-11-03 13:03 ` arisawa
0 siblings, 1 reply; 14+ messages in thread
From: Abhey Shah @ 2006-11-03 11:06 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
One final thing how do you get the page numbering on the center top of
the page??
thanks
Abhey
On 30 Oct 2006, at 23:58, arisawa@ar.aichi-u.ac.jp wrote:
> I wrote
>
>>
>>
>>> any known recipes to make a LaTeX document
>>> 'visually similar to the Plan 9 papers'
>>> of /sys/doc/9 ?
>>>
>>>
>>
>> Mine is, substitutiong "article.cls" by
>> ...
>>
>
> But it seems that the mail has lost the following lines:
>
> \documentclass[10pt]{p9article}
> \textwidth 150mm
> \textheight 230mm
> \topmargin -11mm
> \oddsidemargin 0mm
> \evensidemargin 0mm
> \usepackage{txfonts}
> \renewcommand{\familydefault}{cmss}
> \title{{\sf\Large\bfseries Pegasus} \\
> {\large\bfseries --- another web server for Plan 9 ---}}
> \author{\normalsize \it Kenji Arisawa, Aichi University\\
> {\normalsize\tt arisawa@aichi-u.ac.jp}}
> \date{}
> \begin{document}
> \sf
>
>
> In addition above, the remark by Alex is helphul:
> \setlength\parindent{0pt}
> \setlength\parskip{0.25\baselineskip} % the 0.25 is just a guess
>
>
> Kenji Arisawa
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-03 11:06 ` Abhey Shah
@ 2006-11-03 13:03 ` arisawa
2006-11-06 22:45 ` Skip Tavakkolian
0 siblings, 1 reply; 14+ messages in thread
From: arisawa @ 2006-11-03 13:03 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 504 bytes --]
Hello,
> One final thing how do you get the page numbering on the center top
> of the page??
the following are lost in the previous mail.
\maketitle\thispagestyle{empty}
I'm afraid this is not what you want to know.
I could not understand what you said. sorry.
by the way, my configuration is not so good.
for example 10pt in document class might be 11pt.
the paper width and height are for A4 paper that is popular in Japan.
a better version is attached below.
Kenji Arisawa
[-- Attachment #2: p9article.cls --]
[-- Type: application/octet-stream, Size: 21405 bytes --]
%%
%% This is file `article.cls',
%% generated with the docstrip utility.
%%
%% The original source files were:
%%
%% classes.dtx (with options: `article')
%%
%% This is a generated file.
%%
%% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001
%% The LaTeX3 Project and any individual authors listed elsewhere
%% in this file.
%%
%% This file was generated from file(s) of the LaTeX base system.
%% --------------------------------------------------------------
%%
%% It may be distributed and/or modified under the
%% conditions of the LaTeX Project Public License, either version 1.2
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
%% and version 1.2 or later is part of all distributions of LaTeX
%% version 1999/12/01 or later.
%%
%% This file may only be distributed together with a copy of the LaTeX
%% base system. You may however distribute the LaTeX base system without
%% such generated files.
%%
%% The list of all files belonging to the LaTeX base distribution is
%% given in the file `manifest.txt'. See also `legal.txt' for additional
%% information.
%%
%% \CharacterTable
%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%% Digits \0\1\2\3\4\5\6\7\8\9
%% Exclamation \! Double quote \" Hash (number) \#
%% Dollar \$ Percent \% Ampersand \&
%% Acute accent \' Left paren \( Right paren \)
%% Asterisk \* Plus \+ Comma \,
%% Minus \- Point \. Solidus \/
%% Colon \: Semicolon \; Less than \<
%% Equals \= Greater than \> Question mark \?
%% Commercial at \@ Left bracket \[ Backslash \\
%% Right bracket \] Circumflex \^ Underscore \_
%% Grave accent \` Left brace \{ Vertical bar \|
%% Right brace \} Tilde \~}
\NeedsTeXFormat{LaTeX2e}[1995/12/01]
\ProvidesClass{article}
[2001/04/21 v1.4e
Standard LaTeX document class]
\newcommand\@ptsize{}
\newif\if@restonecol
\newif\if@titlepage
\@titlepagefalse
\if@compatibility\else
\DeclareOption{a4paper}
{\setlength\paperheight {297mm}%
\setlength\paperwidth {210mm}}
\DeclareOption{a5paper}
{\setlength\paperheight {210mm}%
\setlength\paperwidth {148mm}}
\DeclareOption{b5paper}
{\setlength\paperheight {250mm}%
\setlength\paperwidth {176mm}}
\DeclareOption{letterpaper}
{\setlength\paperheight {11in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{legalpaper}
{\setlength\paperheight {14in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{executivepaper}
{\setlength\paperheight {10.5in}%
\setlength\paperwidth {7.25in}}
\DeclareOption{landscape}
{\setlength\@tempdima {\paperheight}%
\setlength\paperheight {\paperwidth}%
\setlength\paperwidth {\@tempdima}}
\fi
\if@compatibility
\renewcommand\@ptsize{0}
\else
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\fi
\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
\if@compatibility\else
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\fi
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\if@compatibility\else
\DeclareOption{final}{\setlength\overfullrule{0pt}}
\fi
\DeclareOption{titlepage}{\@titlepagetrue}
\if@compatibility\else
\DeclareOption{notitlepage}{\@titlepagefalse}
\fi
\if@compatibility\else
\DeclareOption{onecolumn}{\@twocolumnfalse}
\fi
\DeclareOption{twocolumn}{\@twocolumntrue}
\DeclareOption{leqno}{\input{leqno.clo}}
\DeclareOption{fleqn}{\input{fleqn.clo}}
\DeclareOption{openbib}{%
\AtEndOfPackage{%
\renewcommand\@openbib@code{%
\advance\leftmargin\bibindent
\itemindent -\bibindent
\listparindent \itemindent
\parsep \z@
}%
\renewcommand\newblock{\par}}%
}
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
\ProcessOptions
\input{size1\@ptsize.clo}
\setlength\lineskip{1\p@}
\setlength\normallineskip{1\p@}
\renewcommand\baselinestretch{}
\setlength\parskip{0\p@ \@plus \p@}
\@lowpenalty 51
\@medpenalty 151
\@highpenalty 301
\setcounter{topnumber}{2}
\renewcommand\topfraction{.7}
\setcounter{bottomnumber}{1}
\renewcommand\bottomfraction{.3}
\setcounter{totalnumber}{3}
\renewcommand\textfraction{.2}
\renewcommand\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\renewcommand\dbltopfraction{.7}
\renewcommand\dblfloatpagefraction{.5}
\if@twoside
\def\ps@headings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection\quad
\fi
##1}}{}}%
\def\subsectionmark##1{%
\markright {%
\ifnum \c@secnumdepth >\@ne
\thesubsection\quad
\fi
##1}}}
\else
\def\ps@headings{%
\let\@oddfoot\@empty
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
\thesection\quad
\fi
##1}}}}
\fi
\def\ps@myheadings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\@gobbletwo
\let\sectionmark\@gobble
\let\subsectionmark\@gobble
}
\if@titlepage
\newcommand\maketitle{\begin{titlepage}%
\let\footnotesize\small
\let\footnoterule\relax
\let \footnote \thanks
\null\vfil
\vskip 60\p@
\begin{center}%
{\LARGE \@title \par}%
\vskip 3em%
{\large
\lineskip .75em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1.5em%
{\large \@date \par}% % Set date in \large size.
\end{center}\par
\@thanks
\vfil\null
\end{titlepage}%
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\else
\newcommand\maketitle{\par
\begingroup
\renewcommand\thefootnote{\@fnsymbol\c@footnote}%
\def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
\long\def\@makefntext##1{\parindent 1em\noindent
\hb@xt@1.8em{%
\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
\if@twocolumn
\ifnum \col@number=\@ne
\@maketitle
\else
\twocolumn[\@maketitle]%
\fi
\else
\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle
\fi
\thispagestyle{plain}\@thanks
\endgroup
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\def\@maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\sf\Large\bfseries \@title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\normalsize \it\@author
\end{tabular}\par}%
\vskip 1em%
{\large \@date}%
\end{center}%
\par
\vskip 1.5em}
\fi
\setcounter{secnumdepth}{3}
\newcounter {part}
\newcounter {section}
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
\renewcommand \thepart {\@Roman\c@part}
\renewcommand \thesection {\@arabic\c@section.}
\renewcommand\thesubsection {\thesection\@arabic\c@subsection.}
\renewcommand\thesubsubsection{\thesubsection \@arabic\c@subsubsection.}
\renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph}
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
\newcommand\part{%
\if@noskipsec \leavevmode \fi
\par
\addvspace{4ex}%
\@afterindentfalse
\secdef\@part\@spart}
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >\m@ne
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\ifnum \c@secnumdepth >\m@ne
\Large\bfseries \partname\nobreakspace\thepart
\par\nobreak
\fi
\huge \bfseries #2%
\markboth{}{}\par}%
\nobreak
\vskip 3ex
\@afterheading}
\def\@spart#1{%
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\huge \bfseries #1\par}%
\nobreak
\vskip 3ex
\@afterheading}
\newcommand\section{\@startsection {section}{1}{\z@}%
% {-3.5ex \@plus -1ex \@minus -.2ex}
{-1.5ex \@plus -1ex \@minus -.2ex}% before skip -Kenar-
% {2.3ex \@plus.2ex}
{0.1ex \@plus.2ex}% after skip -Kenar-
{\sf\large\bfseries}} % -Kenar-
\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
%{-3.25ex\@plus -1ex \@minus -.2ex}%
{-1.35ex\@plus -1ex \@minus -.2ex}% before skip -Kenar-
% {1.5ex \@plus .2ex}
{0.1ex \@plus .2ex}% after skip -Kenar-
{\sf \normalsize\bfseries}} % -Kenar-
\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.5ex \@plus .2ex}%
{\normalfont\normalsize\bfseries}}
\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
{3.25ex \@plus1ex \@minus.2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
{3.25ex \@plus1ex \@minus .2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\if@twocolumn
\setlength\leftmargini {2em}
\else
\setlength\leftmargini {2.5em}
\fi
\leftmargin \leftmargini
\setlength\leftmarginii {2.2em}
\setlength\leftmarginiii {1.87em}
\setlength\leftmarginiv {1.7em}
\if@twocolumn
\setlength\leftmarginv {.5em}
\setlength\leftmarginvi {.5em}
\else
\setlength\leftmarginv {1em}
\setlength\leftmarginvi {1em}
\fi
\setlength \labelsep {0.5em}
\setlength \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
\@beginparpenalty -\@lowpenalty
\@endparpenalty -\@lowpenalty
\@itempenalty -\@lowpenalty
\renewcommand\theenumi{\@arabic\c@enumi}
\renewcommand\theenumii{\@alph\c@enumii}
\renewcommand\theenumiii{\@roman\c@enumiii}
\renewcommand\theenumiv{\@Alph\c@enumiv}
\newcommand\labelenumi{\theenumi.}
\newcommand\labelenumii{(\theenumii)}
\newcommand\labelenumiii{\theenumiii.}
\newcommand\labelenumiv{\theenumiv.}
\renewcommand\p@enumii{\theenumi}
\renewcommand\p@enumiii{\theenumi(\theenumii)}
\renewcommand\p@enumiv{\p@enumiii\theenumiii}
\newcommand\labelitemi{\textbullet}
\newcommand\labelitemii{\normalfont\bfseries \textendash}
\newcommand\labelitemiii{\textasteriskcentered}
\newcommand\labelitemiv{\textperiodcentered}
\newenvironment{description}
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
{\endlist}
\newcommand*\descriptionlabel[1]{\hspace\labelsep
\sf\bfseries #1}
% \normalfont\bfseries #1}
\if@titlepage
\newenvironment{abstract}{%
\titlepage
\null\vfil
\@beginparpenalty\@lowpenalty
\begin{center}%
\bfseries \abstractname
\@endparpenalty\@M
\end{center}}%
{\par\vfil\null\endtitlepage}
\else
\newenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\small
\begin{center}%
{\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
\bigskip
\end{center}%
\quotation
\fi}
{\if@twocolumn\else\endquotation\fi}
\fi
\newenvironment{verse}
{\let\\\@centercr
\list{}{\itemsep \z@
\itemindent -1.5em%
\listparindent\itemindent
\rightmargin \leftmargin
\advance\leftmargin 1.5em}%
\item\relax}
{\endlist}
\newenvironment{quotation}
{\list{}{\listparindent 1.5em%
\itemindent \listparindent
\rightmargin \leftmargin
\parsep \z@ \@plus\p@}%
\item\relax}
{\endlist}
\newenvironment{quote}
{\list{}{\rightmargin\leftmargin}%
\item\relax}
{\endlist}
\if@compatibility
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\z@
}%
{\if@restonecol\twocolumn \else \newpage \fi
}
\else
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\@ne
}%
{\if@restonecol\twocolumn \else \newpage \fi
\if@twoside\else
\setcounter{page}\@ne
\fi
}
\fi
\newcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\gdef\thesection{\@Alph\c@section}}
\setlength\arraycolsep{5\p@}
\setlength\tabcolsep{6\p@}
\setlength\arrayrulewidth{.4\p@}
\setlength\doublerulesep{2\p@}
\setlength\tabbingsep{\labelsep}
\skip\@mpfootins = \skip\footins
\setlength\fboxsep{3\p@}
\setlength\fboxrule{.4\p@}
\renewcommand \theequation {\@arabic\c@equation}
\newcounter{figure}
\renewcommand \thefigure {\@arabic\c@figure}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{\figurename\nobreakspace\thefigure}
\newenvironment{figure}
{\@float{figure}}
{\end@float}
\newenvironment{figure*}
{\@dblfloat{figure}}
{\end@dblfloat}
\newcounter{table}
\renewcommand\thetable{\@arabic\c@table}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{\tablename\nobreakspace\thetable}
\newenvironment{table}
{\@float{table}}
{\end@float}
\newenvironment{table*}
{\@dblfloat{table}}
{\end@dblfloat}
\newlength\abovecaptionskip
\newlength\belowcaptionskip
\setlength\abovecaptionskip{10\p@}
\setlength\belowcaptionskip{0\p@}
\long\def\@makecaption#1#2{%
\vskip\abovecaptionskip
\sbox\@tempboxa{#1: #2}%
\ifdim \wd\@tempboxa >\hsize
#1: #2\par
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip}
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
\newcommand\@pnumwidth{1.55em}
\newcommand\@tocrmarg{2.55em}
\newcommand\@dotsep{4.5}
\setcounter{tocdepth}{3}
\newcommand\tableofcontents{%
\section*{\contentsname
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
\@starttoc{toc}%
}
\newcommand*\l@part[2]{%
\ifnum \c@tocdepth >-2\relax
\addpenalty\@secpenalty
\addvspace{2.25em \@plus\p@}%
\setlength\@tempdima{3em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
{\leavevmode
\large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
\nobreak
\if@compatibility
\global\@nobreaktrue
\everypar{\global\@nobreakfalse\everypar{}}%
\fi
\endgroup
\fi}
\newcommand*\l@section[2]{%
\ifnum \c@tocdepth >\z@
\addpenalty\@secpenalty
\addvspace{1.0em \@plus\p@}%
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\leavevmode \bfseries
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
\endgroup
\fi}
\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
\newcommand\listoffigures{%
\section*{\listfigurename}%
\@mkboth{\MakeUppercase\listfigurename}%
{\MakeUppercase\listfigurename}%
\@starttoc{lof}%
}
\newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
\newcommand\listoftables{%
\section*{\listtablename}%
\@mkboth{%
\MakeUppercase\listtablename}%
{\MakeUppercase\listtablename}%
\@starttoc{lot}%
}
\let\l@table\l@figure
\newdimen\bibindent
\setlength\bibindent{1.5em}
\newenvironment{thebibliography}[1]
{\section*{\refname}%
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}%
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\@openbib@code
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
\setlength{\itemsep}{0em} % -Kenar-
\sloppy
\clubpenalty4000
\@clubpenalty \clubpenalty
\widowpenalty4000%
\sfcode`\.\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist}
\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
\let\@openbib@code\@empty
\newenvironment{theindex}
{\if@twocolumn
\@restonecolfalse
\else
\@restonecoltrue
\fi
\columnseprule \z@
\columnsep 35\p@
\twocolumn[\section*{\indexname}]%
\@mkboth{\MakeUppercase\indexname}%
{\MakeUppercase\indexname}%
\thispagestyle{plain}\parindent\z@
\parskip\z@ \@plus .3\p@\relax
\let\item\@idxitem}
{\if@restonecol\onecolumn\else\clearpage\fi}
\newcommand\@idxitem{\par\hangindent 40\p@}
\newcommand\subitem{\@idxitem \hspace*{20\p@}}
\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
\renewcommand\footnoterule{%
\kern-3\p@
\hrule\@width.4\columnwidth
\kern2.6\p@}
\newcommand\@makefntext[1]{%
\parindent 1em%
\noindent
\hb@xt@1.8em{\hss\@makefnmark}#1}
\newcommand\contentsname{Contents}
\newcommand\listfigurename{List of Figures}
\newcommand\listtablename{List of Tables}
\newcommand\refname{References}
\newcommand\indexname{Index}
\newcommand\figurename{Figure}
\newcommand\tablename{Table}
\newcommand\partname{Part}
\newcommand\appendixname{Appendix}
\newcommand\abstractname{{\it ABSTRACT}} % -Kenar-
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
\setlength\columnsep{10\p@}
\setlength\columnseprule{0\p@}
\pagestyle{plain}
\pagenumbering{arabic}
\if@twoside
\else
\raggedbottom
\fi
\if@twocolumn
\twocolumn
\sloppy
\flushbottom
\else
\onecolumn
\fi
\endinput
%%
%% End of file `article.cls'.
[-- Attachment #3: Type: text/plain, Size: 2 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-03 13:03 ` arisawa
@ 2006-11-06 22:45 ` Skip Tavakkolian
2006-11-06 23:39 ` andrey mirtchovski
0 siblings, 1 reply; 14+ messages in thread
From: Skip Tavakkolian @ 2006-11-06 22:45 UTC (permalink / raw)
To: 9fans
this works for me. troffms.sty is already in plan9 tex distribution.
it is for use with tr2latex. textheight is abit long for letter size.
\documentclass[11pt]{article}
\usepackage{troffms} % <--
\usepackage{graphicx} % others ...
\textheight=8.5in
\begin{document}
\title{Time Travelers' Handbook of 1001 Tense Formations}
\author{Dr. Dan Streetmentioner}
\begin{abstract}
....
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-06 22:45 ` Skip Tavakkolian
@ 2006-11-06 23:39 ` andrey mirtchovski
2006-11-07 20:43 ` andrey mirtchovski
0 siblings, 1 reply; 14+ messages in thread
From: andrey mirtchovski @ 2006-11-06 23:39 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
+10 points for using the Guide :)
On 11/6/06, Skip Tavakkolian <9nut@9netics.com> wrote:
> this works for me. troffms.sty is already in plan9 tex distribution.
> it is for use with tr2latex. textheight is abit long for letter size.
>
> \documentclass[11pt]{article}
> \usepackage{troffms} % <--
> \usepackage{graphicx} % others ...
> \textheight=8.5in
> \begin{document}
> \title{Time Travelers' Handbook of 1001 Tense Formations}
> \author{Dr. Dan Streetmentioner}
> \begin{abstract}
> ....
>
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-06 23:39 ` andrey mirtchovski
@ 2006-11-07 20:43 ` andrey mirtchovski
2006-11-07 21:29 ` Axel Belinfante
0 siblings, 1 reply; 14+ messages in thread
From: andrey mirtchovski @ 2006-11-07 20:43 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 1764 bytes --]
i think i finally dialled it. see the attach comparison.
the changes are:
i'm using p9article.cls, modified:
changed:
\ProvidesClass{article} -> \ProvidesClass{p9article}
removed "date" from the maketitle definition
the rest is in the .tex file:
\documentclass[11pt]{p9article}
\textheight 230mm
\textwidth 150mm
\topmargin +5mm
\oddsidemargin 0mm
\evensidemargin 0mm
\setlength\parindent{0pt} % no indentation on any paragraph start
\setlength\parskip{0.25\baselineskip} % paragraphs are close
\renewcommand\baselinestretch{0.8} % lines are closer
together in auth.ps
\renewcommand{\familydefault}{\sfdefault} % should be similar font to auth.ps
% the following two commands bring \section and \subsection closer to the text
% you may have to add a line for \subsubsection if you have such
\makeatletter
\renewcommand\section{\@startsection {section}{1}{\z@} {3pt} {1pt}
{\normalfont\normalsize\bfseries}}
\renewcommand\subsection{\@startsection {subsection}{1}{\z@} {3pt}
{1pt} {\normalfont\normalsize\bfseries}}
\makeatother
% the title text needs to match auth.ps, so these changes are required
\begin{document}
\title{\Large\textbf{Estimating the Airspeed Velocity of an Unladen Swallow}}
\author{\large
\begin{tabular}{c}
\textsl{Andrey Mirtchovski}\\
\textsl{Unidentified Location}\\
\texttt{andrey@nothere.bg}\\
\end{tabular}
}
% no page numbers in title
\maketitle\thispagestyle{empty}
% in fact, no page numbers anywhere
\pagestyle{empty}
\begin{abstract}
\setlength\parindent{0pt}
\setlength\parskip{0.25\baselineskip}
The mating habits of insects are quite different from those of large mammals.
\end{abstract}
\section{Introduction}
....
[-- Attachment #2: snapshot.png --]
[-- Type: image/png, Size: 360616 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-07 20:43 ` andrey mirtchovski
@ 2006-11-07 21:29 ` Axel Belinfante
2006-11-07 22:24 ` andrey mirtchovski
0 siblings, 1 reply; 14+ messages in thread
From: Axel Belinfante @ 2006-11-07 21:29 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> i think i finally dialled it. see the attach comparison.
silly question but I'll ask it anyway:
with this, do you run latex on plan 9 or on unix?
Axel.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Re: [9fans] mimicking Plan 9 paper style with LaTeX?
2006-11-07 21:29 ` Axel Belinfante
@ 2006-11-07 22:24 ` andrey mirtchovski
0 siblings, 0 replies; 14+ messages in thread
From: andrey mirtchovski @ 2006-11-07 22:24 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
both, actually. i just tried it on Plan 9 and it looks fine (just had
to switch to graphicx for graphics)
On 11/7/06, Axel Belinfante <Axel.Belinfante@cs.utwente.nl> wrote:
> > i think i finally dialled it. see the attach comparison.
>
> silly question but I'll ask it anyway:
> with this, do you run latex on plan 9 or on unix?
>
> Axel.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2006-11-07 22:24 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-10-30 13:25 [9fans] mimicking Plan 9 paper style with LaTeX? Axel Belinfante
2006-10-30 13:28 ` erik quanstrom
2006-10-30 13:51 ` andrey mirtchovski
2006-10-30 14:11 ` arisawa
2006-10-30 15:01 ` Axel Belinfante
2006-10-30 22:03 ` arisawa
2006-10-30 23:58 ` arisawa
2006-11-03 11:06 ` Abhey Shah
2006-11-03 13:03 ` arisawa
2006-11-06 22:45 ` Skip Tavakkolian
2006-11-06 23:39 ` andrey mirtchovski
2006-11-07 20:43 ` andrey mirtchovski
2006-11-07 21:29 ` Axel Belinfante
2006-11-07 22:24 ` andrey mirtchovski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).