* [9fans] Fwd: Trouble with loading from plan9.iso [not found] <1844095190.20061205152015@lexus.lg.bank.gov.ua> @ 2006-12-05 16:54 ` Russ Cox 2006-12-05 23:05 ` John Floren 0 siblings, 1 reply; 6+ messages in thread From: Russ Cox @ 2006-12-05 16:54 UTC (permalink / raw) To: 9fans; +Cc: 9trouble Here is some mail to 9trouble as per our earlier discussion. Enjoy. ---------- Forwarded message ---------- From: intra@lexus.lg.bank.gov.ua <intra@lexus.lg.bank.gov.ua> Date: Dec 5, 2006 8:20 AM Subject: Trouble with loading from plan9.iso To: 9trouble@plan9.bell-labs.com Hello! I 've downloaded http://cm.bell-labs.com/plan9/download/plan9.iso.bz2 , burned plan9.iso by Nero. I want to install it on my x86 system, or see how it works (Live CD), but I saw: boot from: I tried, as in http://plan9.bell-labs.com/wiki/plan9/Installation_troubleshooting/index.html sdC0!cdboot!9pcflop.gz sdC1!cdboot!9pcflop.gz sdD0!cdboot!9pcflop.gz sdD1!cdboot!9pcflop.gz but only then boot from: sdD0!cdboot!9pcflop.gz sdD0!cdboot unknown partition. Please, help me, or give mail that people, which can help me! -- Best regards, Sergey mailto:intra@lexus.lg.bank.gov.ua ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Fwd: Trouble with loading from plan9.iso 2006-12-05 16:54 ` [9fans] Fwd: Trouble with loading from plan9.iso Russ Cox @ 2006-12-05 23:05 ` John Floren 2006-12-06 2:26 ` Rodolfo Garcia 0 siblings, 1 reply; 6+ messages in thread From: John Floren @ 2006-12-05 23:05 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On 12/5/06, Russ Cox <rsc@swtch.com> wrote: > Here is some mail to 9trouble as per our earlier discussion. Enjoy. > > ---------- Forwarded message ---------- > From: intra@lexus.lg.bank.gov.ua <intra@lexus.lg.bank.gov.ua> > Date: Dec 5, 2006 8:20 AM > Subject: Trouble with loading from plan9.iso > To: 9trouble@plan9.bell-labs.com > > > Hello! I 've downloaded > http://cm.bell-labs.com/plan9/download/plan9.iso.bz2 , burned > plan9.iso by Nero. I want to install it on my x86 system, or see how > it works (Live CD), but I saw: > boot from: > I tried, as in http://plan9.bell-labs.com/wiki/plan9/Installation_troubleshooting/index.html > sdC0!cdboot!9pcflop.gz > sdC1!cdboot!9pcflop.gz > sdD0!cdboot!9pcflop.gz > sdD1!cdboot!9pcflop.gz > but only then > boot from: sdD0!cdboot!9pcflop.gz > sdD0!cdboot unknown partition. > > > > Please, help me, or give mail that people, which can help me! > > > > -- > Best regards, > Sergey mailto:intra@lexus.lg.bank.gov.ua > The problem here is that 9load and some drive controllers are apparently made of fail and AIDS. I have experienced this same problem with a working CD on an older Pentium machine. I don't think I ever solved it. John -- Ph'nglui mglw'nafh Cthulhu R'lyeh wgah'nagl fhtagn ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Fwd: Trouble with loading from plan9.iso 2006-12-05 23:05 ` John Floren @ 2006-12-06 2:26 ` Rodolfo Garcia 2006-12-06 4:01 ` erik quanstrom 0 siblings, 1 reply; 6+ messages in thread From: Rodolfo Garcia @ 2006-12-06 2:26 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs I have the same problem in a Pentium II, the 9load cannot work with the CD. My Motherboard is a Soyo for PII 350 MHz slds. John Floren wrote: > On 12/5/06, Russ Cox <rsc@swtch.com> wrote: >> Here is some mail to 9trouble as per our earlier discussion. Enjoy. >> >> ---------- Forwarded message ---------- >> From: intra@lexus.lg.bank.gov.ua <intra@lexus.lg.bank.gov.ua> >> Date: Dec 5, 2006 8:20 AM >> Subject: Trouble with loading from plan9.iso >> To: 9trouble@plan9.bell-labs.com >> >> >> Hello! I 've downloaded >> http://cm.bell-labs.com/plan9/download/plan9.iso.bz2 , burned >> plan9.iso by Nero. I want to install it on my x86 system, or see how >> it works (Live CD), but I saw: >> boot from: >> I tried, as in >> http://plan9.bell-labs.com/wiki/plan9/Installation_troubleshooting/index.html >> >> sdC0!cdboot!9pcflop.gz >> sdC1!cdboot!9pcflop.gz >> sdD0!cdboot!9pcflop.gz >> sdD1!cdboot!9pcflop.gz >> but only then >> boot from: sdD0!cdboot!9pcflop.gz >> sdD0!cdboot unknown partition. >> >> >> >> Please, help me, or give mail that people, which can help me! >> >> >> >> -- >> Best regards, >> Sergey mailto:intra@lexus.lg.bank.gov.ua >> > > The problem here is that 9load and some drive controllers are > apparently made of fail and AIDS. I have experienced this same problem > with a working CD on an older Pentium machine. I don't think I ever > solved it. > > > John ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Fwd: Trouble with loading from plan9.iso 2006-12-06 2:26 ` Rodolfo Garcia @ 2006-12-06 4:01 ` erik quanstrom 2006-12-06 11:41 ` Rodolfo Garcia 0 siblings, 1 reply; 6+ messages in thread From: erik quanstrom @ 2006-12-06 4:01 UTC (permalink / raw) To: 9fans i have this problem with a 440GX pIII machine that i use as a plan 9 terminal. the solution for me was to boot from floppy then run 9660srv by hand and mount the distribution that way. linux can boot on the same machine so theoretically it would be possible to fix, but i'm not sure how much effort it would be. - erik ---- I have the same problem in a Pentium II, the 9load cannot work with the CD. My Motherboard is a Soyo for PII 350 MHz slds. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Fwd: Trouble with loading from plan9.iso 2006-12-06 4:01 ` erik quanstrom @ 2006-12-06 11:41 ` Rodolfo Garcia 2006-12-06 12:00 ` Álvaro Jurado Cuevas 0 siblings, 1 reply; 6+ messages in thread From: Rodolfo Garcia @ 2006-12-06 11:41 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs I use "floppy + network installation", I can't use the CD ( I try with two different drives) erik quanstrom wrote: > i have this problem with a 440GX pIII machine that i use as > a plan 9 terminal. the solution for me was to boot from floppy > then run 9660srv by hand and mount the distribution that way. > > linux can boot on the same machine so theoretically it would > be possible to fix, but i'm not sure how much effort it would be. > > - erik > > ---- > > I have the same problem in a Pentium II, the 9load cannot work with the > CD. My Motherboard is a Soyo for PII 350 MHz > > slds. > > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Fwd: Trouble with loading from plan9.iso 2006-12-06 11:41 ` Rodolfo Garcia @ 2006-12-06 12:00 ` Álvaro Jurado Cuevas 0 siblings, 0 replies; 6+ messages in thread From: Álvaro Jurado Cuevas @ 2006-12-06 12:00 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs I had the same problem in a Pentium 90 Mhz machine and in an old PII HP and Toshiba laptops. In P90 I booted it from floppy, but later it can't recognize HDD (no problems with linux an *BSD in all of them). In laptops I solved extracting their hdd's, puting in another laptop and installing plan9 from it. El Miércoles, 6 de Diciembre de 2006 12:41, Rodolfo Garcia escribió: > I use "floppy + network installation", I can't use the CD ( I try with > two different drives) > > erik quanstrom wrote: > > i have this problem with a 440GX pIII machine that i use as > > a plan 9 terminal. the solution for me was to boot from floppy > > then run 9660srv by hand and mount the distribution that way. > > > > linux can boot on the same machine so theoretically it would > > be possible to fix, but i'm not sure how much effort it would be. > > > > - erik > > > > ---- > > >[...] -- Elbing ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-12-06 12:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1844095190.20061205152015@lexus.lg.bank.gov.ua>
2006-12-05 16:54 ` [9fans] Fwd: Trouble with loading from plan9.iso Russ Cox
2006-12-05 23:05 ` John Floren
2006-12-06 2:26 ` Rodolfo Garcia
2006-12-06 4:01 ` erik quanstrom
2006-12-06 11:41 ` Rodolfo Garcia
2006-12-06 12:00 ` Álvaro Jurado Cuevas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).