* Re: [9fans] Installation problem: ATI card
@ 2000-08-10 17:24 jmk
2000-08-11 8:37 ` DSCreat
0 siblings, 1 reply; 6+ messages in thread
From: jmk @ 2000-08-10 17:24 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 57 bytes --]
did you comment out the 'monitor=' line in plan9.ini?
[-- Attachment #2: Type: message/rfc822, Size: 2293 bytes --]
From: DSCreat <dscreatNOdsSPAM@mail.com.invalid>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Installation problem: ATI card
Date: Thu, 10 Aug 2000 16:16:42 GMT
Message-ID: <059bc820.4120cfdc@usw-ex0104-032.remarq.com>
jmk@plan9.bell-labs.com wrote:
>Please add the following to the MACH64 section in /lib/vgadb
> 0xC0000-0xC0200="MACH64VV"
I did that, but after booting it began trying to switch to the
graphics mode in endless loop. Of course I could not
run "aux/vga -p>somefile". Sorry, I'm not familiar with the
system at all ... Any advise how can I run it after all?
>then run aux/vga -p>somefile and mail me 'somefile'. This is
>a chip revision we've not seen before, the chances are good
>it will work but we need to see a little more of the chip
information
>before adding in a fix. Thanks.
>
>--jim
>
>
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Installation problem: ATI card
2000-08-10 17:24 [9fans] Installation problem: ATI card jmk
@ 2000-08-11 8:37 ` DSCreat
0 siblings, 0 replies; 6+ messages in thread
From: DSCreat @ 2000-08-11 8:37 UTC (permalink / raw)
To: 9fans
rsc@plan9.bell-labs.com (Russ Cox) wrote:
>There should be a file "vgainfo.txt" on your
>boot floppy now. Please mail that.
Here it is:
main->snarf
vga->snarf
mach64xx->snarf
vga->dump
vga misc 67
vga feature 00
vga sequencer 03 00 03 00 02
vga crt 5F 4F 50 82 55 81 BF 1F - 00 4F 0E 0F 00 00
07 80
9C 8E 8F 28 1F 96 B9 A3 - FF
vga graphics 00 00 00 00 00 10 0E 00 - FF
vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D
3E 3F
0C 00 0F 08 00
vga vm a b 16777216 0
vga vmz 16777216
vga apz 8388608
vga linear 1
vga->attr: 0xC0000-0xC0200=MACH64VV
mach64xx->dump
mach64xx pci 2e4c8 regtable pciregs io ec00 portio
mach64xx ccru 300
mach64xx HTotalDisp 004F005F
mach64xx HSyncStrtWid 00010055
mach64xx VTotalDisp 018F01BF
mach64xx VSyncStrtWid 000E019C
mach64xx VlineCrntVline 011903FF
mach64xx OffPitch 0A000000
mach64xx IntCntl 00000034
mach64xx CrtcGenCntl 02410200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 00000000
mach64xx CurClr1 FFFFFFFF
mach64xx CurOffset 00000000
mach64xx CurHVposn 00000000
mach64xx CurHVoff 00000000
mach64xx ScratchReg0 04900400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00AD0000
mach64xx BusCntl 73330000
mach64xx MemCntl D0301097
mach64xx ExtMemCntl F0010201
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8701200A
mach64xx GenTestCntl 00000108
mach64xx ConfigCntl 00003942
mach64xx ConfigChipId 3A005656
mach64xx ConfigStat0 0080001B
mach64xx ConfigStat1 00000000
mach64xx DspConfig 00000000
mach64xx DspOnOff 00000000
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth FFFFFFFF
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000000
mach64xx LcdData 00000000
mach64xx PLL AD D5 1F 14 86 03 FF DA - F5 00 00 C1 A0 1B
00 00
00 00 80 00 10 F6 CC 03 - 00 00 00 00 00 00
00 00
mach64xx VCLK0 25172284
mach64xx VCLK1 28289952
mach64xx VCLK2 0
mach64xx VCLK3 0
rom table offset 100
freq table offset 69E
memclk 62000000
ref_freq 14320000
ref_divider 31
min_freq 9840000
max_freq 235000000
pd 3 value 0 (|3)
post = 8
mach64xx pixel clock = 25170000
vmf 25175000 vmdf 0 vf1 0 vbw 0
vga->init
mach64xx->init
dbdumpmode
type=vga, size=640x480x8
frequency=25175000
x=640 (0x280), y=480 (0x1E0), z=8 (0x8)
ht=800 (0x320), shb=664 (0x298), ehb=760 (0x2F8)
shs=664 (0x298), ehs=760 (0x2F8)
vt=525 (0x20D), vrs=491 (0x1EB), vre=493 (0x1ED)
hsync=0, vsync=0, interlace=0
vga->dump
vga flag Fdump|Finit|Fsnarf
vga misc E3
vga feature 00
vga sequencer 03 01 0F 00 0A
vga crt 5F 4F 52 9F 53 1F20B 3E - 00 40 00 00 00 00
00 00
1EB 2D1DF 50 601EB1EC A3 -7FF
vga graphics 00 00 00 00 00 50 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D
0E 0F
41 FF 0F 00 00
vga clock[0] f 25175000
vga clock[0] d i m 0 0 - 31
vga clock[0] n p q r 218 8 - 0 0
vga vm a b 16777216 0
vga vmz 16777216
vga apz 8388608
vga linear 1
vga->attr: 0xC0000-0xC0200=MACH64VV
mach64xx->dump
mach64xx flag Ulinear|Fdump|Finit|Fsnarf
mach64xx pci 2e4c8 regtable pciregs io ec00 portio
mach64xx ccru 300
mach64xx HTotalDisp 004F0063
mach64xx HSyncStrtWid 000C0052
mach64xx VTotalDisp 01DF020C
mach64xx VSyncStrtWid 000201EA
mach64xx VlineCrntVline 011903FF
mach64xx OffPitch 14000000
mach64xx IntCntl 00000000
mach64xx CrtcGenCntl 03010200
mach64xx OvrClr 00000000
mach64xx OvrWidLR 00000000
mach64xx OvrWidTB 00000000
mach64xx CurClr0 00000000
mach64xx CurClr1 FFFFFFFF
mach64xx CurOffset 00000000
mach64xx CurHVposn 00000000
mach64xx CurHVoff 00000000
mach64xx ScratchReg0 04900400
mach64xx ScratchReg1 00000000
mach64xx ClockCntl 00000002
mach64xx BusCntl 73330000
mach64xx MemCntl D0301097
mach64xx ExtMemCntl F0010201
mach64xx MemVgaWpSel 00010000
mach64xx MemVgaRpSel 00010000
mach64xx DacRegs 00FF0040
mach64xx DacCntl 8701200A
mach64xx GenTestCntl 00000108
mach64xx ConfigCntl 00000000
mach64xx ConfigChipId 3A005656
mach64xx ConfigStat0 0080001B
mach64xx ConfigStat1 00000000
mach64xx DspConfig 00000000
mach64xx DspOnOff 00000000
mach64xx DpBkgdClr FFFFFFFF
mach64xx DpChainMsk FFFFFFFF
mach64xx DpFrgdClr FFFFFFFF
mach64xx DpMix FFFFFFFF
mach64xx DpPixWidth 00020202
mach64xx DpSrc FFFFFFFF
mach64xx DpWriteMsk FFFFFFFF
mach64xx LcdIndex 00000000
mach64xx LcdData 00000000
mach64xx PLL AD D5 1F 14 86 03 FF DA - F5 DA 00 81 A0 1B
00 00
00 00 80 00 10 F6 CC 03 - 00 00 00 00 00 00
00 00
mach64xx VCLK0 25172284
mach64xx VCLK1 28289952
mach64xx VCLK2 25172284
mach64xx VCLK3 0
rom table offset 100
freq table offset 69E
memclk 62000000
ref_freq 14320000
ref_divider 31
min_freq 9840000
max_freq 235000000
pd 3 value 0 (|3)
post = 8
mach64xx pixel clock = 25170000
main->exits
jmk@plan9.bell-labs.com wrote:
>did you comment out the 'monitor=' line in plan9.ini?
I tried also without 'monitor=vga' line in plan9.ini, the same
result (still switching modes in endless loop) except that
in "vgainfo.txt" 2 lines changed:
from:
"mach64xx pci 2e4c8 regtable pciregs io ec00 portio"
to:
"mach64xx pci 2e4a8 regtable pciregs io ec00 portio"
and from:
"mach64xx VlineCrntVline 011903FF"
to:
"mach64xx VlineCrntVline 018303FF"
Hope this means something to you ...
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Installation problem: ATI card
@ 2000-08-10 16:49 Russ Cox
0 siblings, 0 replies; 6+ messages in thread
From: Russ Cox @ 2000-08-10 16:49 UTC (permalink / raw)
To: 9fans, jmk
I did that, but after booting it began trying to switch to the
graphics mode in endless loop. Of course I could not
run "aux/vga -p>somefile". Sorry, I'm not familiar with the
system at all ... Any advise how can I run it after all?
There should be a file "vgainfo.txt" on your
boot floppy now. Please mail that.
Russ
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Installation problem: ATI card
2000-07-26 13:54 jmk
@ 2000-08-10 16:16 ` DSCreat
0 siblings, 0 replies; 6+ messages in thread
From: DSCreat @ 2000-08-10 16:16 UTC (permalink / raw)
To: 9fans
jmk@plan9.bell-labs.com wrote:
>Please add the following to the MACH64 section in /lib/vgadb
> 0xC0000-0xC0200="MACH64VV"
I did that, but after booting it began trying to switch to the
graphics mode in endless loop. Of course I could not
run "aux/vga -p>somefile". Sorry, I'm not familiar with the
system at all ... Any advise how can I run it after all?
>then run aux/vga -p>somefile and mail me 'somefile'. This is
>a chip revision we've not seen before, the chances are good
>it will work but we need to see a little more of the chip
information
>before adding in a fix. Thanks.
>
>--jim
>
>
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Installation problem: ATI card
@ 2000-07-26 13:54 jmk
2000-08-10 16:16 ` DSCreat
0 siblings, 1 reply; 6+ messages in thread
From: jmk @ 2000-07-26 13:54 UTC (permalink / raw)
To: 9fans
Please add the following to the MACH64 section in /lib/vgadb
0xC0000-0xC0200="MACH64VV"
then run aux/vga -p>somefile and mail me 'somefile'. This is
a chip revision we've not seen before, the chances are good
it will work but we need to see a little more of the chip information
before adding in a fix. Thanks.
--jim
^ permalink raw reply [flat|nested] 6+ messages in thread
* [9fans] Installation problem: ATI card
@ 2000-07-26 8:42 DSCreat
0 siblings, 0 replies; 6+ messages in thread
From: DSCreat @ 2000-07-26 8:42 UTC (permalink / raw)
To: 9fans
Greetings all!
It seems that my particular card is not supported. Can somebody
please tell me if I should add something to the VGADB file or is
there no hope at all? Here is the description for the card from
windows display settings:
Adapter type: ATI Technologies Inc. ATI-264VT4 PCI
Chip Type: ATI-264VT4 (VT-B3U1)
DAC Type: ATI Internal DAC
Memory Size: 4 MB
Adapter String: 1002-5656-3A-1002-0088
BIOS Information: ATI Video BIOS
Here is PLAN9.INI:
*nomp=1
distname=plan9
partition=new
ether0=type=i82557
monitor=vga
vgasize=640x480x8
mouseport=ps2
audio0=type=sb16
bootargs=local!#f0/fd0disk
bootfile=fd0!dos!9pcflop.gz
installurl=http://204.178.31.2/magic/9down/compressed/964554302.8
usxz93z3z7bxgdkc5y6uzczxiyamfca
And here is VGAINFO.TXT:
aux/vga: controller not in /lib/vgadb
0xC0000 55 AA 40 EB 7B A9 7C 00 00 00 00 00 00 00 00 00 U.@.
{.|.........
0xC0010 00 00 00 00 00 00 00 00 5C 01 00 00 00 00 49
42 ........\.....IB
0xC0020 4D 00 80 78 00 1D 7C 00 00 00 00 00 00 00 00 00
M..x..|.........
0xC0030 20 37 36 31 32 39 35 35 32 30 FF FF 96 EC 25 6A
761295520....%j
0xC0040 33 3F 00 3C 00 00 00 00 00 01 00 00 00 00 00 00
3?.<............
0xC0050 31 39 39 39 2F 30 39 2F 32 34 20 30 31 3A 30 32
1999/09/24 01:02
0xC0060 00 00 00 00 E9 04 4F 00 E9 F9 4E 00 E9 49 12
00 ......O...N..I..
0xC0070 00 00 00 00 00 00 00 00 00 00 FF FF 96 EC 25
6A ..............%j
0xC0080 E9 F1 00 0D 0A 46 6F 72 20 45 76 61 6C 75 61
74 .....For Evaluat
0xC0090 69 6F 6E 20 4F 4E 4C 59 2C 20 50 2F 4E 20 31 31 ion
ONLY, P/N 11
0xC00A0 33 2D 45 56 32 30 34 2D 48 30 30 20 0D 0A 00 28 3-EV204-
H00 ...(
0xC00B0 43 29 20 31 39 38 38 2D 39 37 2C 20 41 54 49 20 C) 1988-
97, ATI
0xC00C0 54 65 63 68 6E 6F 6C 6F 67 69 65 73 20 49 6E 63
Technologies Inc
0xC00D0 2E 42 4B 33 2E 31 31 2F 33 2E 30 39 37 20 67
74 .BK3.11/3.097 gt
0xC00E0 65 76 32 2E 68 30 34 20 36 20 00 4D 41 43 48 36 ev2.h04
6 .MACH6
0xC00F0 34 56 56 50 43 49 4D 54 48 50 55 3F 00 00 4A 00
4VVPCIMTHPU?..J.
main->snarf
vga->snarf
vga->dump
vga misc 67
vga feature 00
vga sequencer 03 00 03 00 02
vga crt 5F 4F 50 82 55 81 BF 1F - 00 4F 0E 0F 00 00
07 80
9C 8E 8F 28 1F 96 B9 A3 - FF
vga graphics 00 00 00 00 00 10 0E 00 - FF
vga attribute 00 01 02 03 04 05 14 07 - 38 39 3A 3B 3C 3D
3E 3F
0C 00 0F 08 00
vga apz 0
vga linear 0
vmf 25175000 vmdf 0 vf1 0 vbw 0
vga->init
dbdumpmode
type=vga, size=640x480x1
frequency=25175000
x=640 (0x280), y=480 (0x1E0), z=1 (0x1)
ht=800 (0x320), shb=664 (0x298), ehb=760 (0x2F8)
shs=664 (0x298), ehs=760 (0x2F8)
vt=525 (0x20D), vrs=491 (0x1EB), vre=493 (0x1ED)
hsync=0, vsync=0, interlace=0
vga->dump
vga flag Fdump|Finit|Fsnarf
vga misc E3
vga feature 00
vga sequencer 03 01 0F 00 06
vga crt 5F 4F 52 9F 53 1F20B 3E - 00 40 00 00 00 00
00 00
1EB 2D1DF 28 001EB1EC C3 -7FF
vga graphics 00 00 00 00 00 00 05 0F - FF
vga attribute 00 01 02 03 04 05 06 07 - 08 09 0A 0B 0C 0D
0E 0F
01 FF 0F 00 00
vga apz 0
vga linear 0
main->exits
-----------------------------------------------------------
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2000-08-11 8:37 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-08-10 17:24 [9fans] Installation problem: ATI card jmk
2000-08-11 8:37 ` DSCreat
-- strict thread matches above, loose matches on Subject: below --
2000-08-10 16:49 Russ Cox
2000-07-26 13:54 jmk
2000-08-10 16:16 ` DSCreat
2000-07-26 8:42 DSCreat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).