* [9fans] Trouble on Thinkpad i1540
@ 2000-06-12 9:56 stephen.wooding
0 siblings, 0 replies; only message in thread
From: stephen.wooding @ 2000-06-12 9:56 UTC (permalink / raw)
To: 9fans
I'm trying to put plan9 on a Thinkpad i1540 (a laptop).
The Thinkpad i1540 has:
12.1" 800x600 LCD screen
Mach 64 ATI Rage Mobility-M / AGP 2X
3c589 Ethernet/Modem Card
Intel 82365 PCIC PCMCIA controller
433 Celeron processor
64M SDRAM
4.8 Gig. EIDE / PCI 2.1 Hard Drive
My plan9.ini says:
*nomp=1
debug=1
bootfile=fd0!9pcflop.gz
distname=plan9
ether0=type=3C589
monitor=lcd
vgasize=800x600x8
mouseport=ps2
installurl=http://204.178.31.2/magic/9down/compressed/960563837.hdw3m4tn39kkqs5pre2vd4evycvxd23k
The floppy starts booting fine, but then I get:
aux/mouse ps2
echo 800x600x8
aux/vga -vip 800x600x8
sleep 2
aux/vga -l 800x600x8
panic: mmukmap1: pa 81000000 entry 1000083
[ --- insert lots of numbers here --- ]
cpu0: exiting
Finally, the hard drive remains active, as does the floppy, until I
power down.
The hardware list at
http://plan9.bell-labs.com/plan9dist/pchardware.html
lists:
ATI Rage II PCI card
ATI Mach64 chipset
as supported. Is the ATI Rage II PCI too different
from my ATI Rage Mobility-M?
Does someone know how to get plan9 installation to start
successfully on this machine?
Thanks,
Steve
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-06-12 9:56 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-06-12 9:56 [9fans] Trouble on Thinkpad i1540 stephen.wooding
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).