[9fans] ipaq Wavelan configuration

[9fans] ipaq Wavelan configuration

[matt]

In ye olde wiki the config file example is :

-------------
	user=<user-name>
	wvkey1=<key string>
	wvkey2=<key string>
	wvkey3=<key string>
	wvtxkey=<key string>
	wvessid=<wavelan name>
	auth=<ip address>
	fs=<ip address>
Your best bet is to copy these off a working bitsy.
-------------

That's a bit too recursive for me, anyone got an example of a working set?

My access point is set up ad-hoc (I think). It's just an open access point anyway.

The problem I mentioned the other day
echo: write error: bad process or channel control request
was because I filled in generic values for them.

I've got the wv(tx)?key. entries commented out now but it still doesn't work.

It won't get a DHCP and if I set

ip/config -g 192.168.1.1 ether /net/ether0 192.168.1.7 255.255.255.0

I get no error but still get

%cat /net/tcpclone
0%

I'm going to have a fiddle with it again later on but if someone could save me some time I'd be greatful

matt

Re: [9fans] ipaq Wavelan configuration

[Fco.J.Ballesteros]

[-- Attachment #1: Type: text/plain, Size: 711 bytes --]

> That's a bit too recursive for me, anyone got an example of a working set?
>

In the bitsy params define your own ones:

user=nemo
wvkey1=guesswhat
wvcrypt=off
wvessid=default_net_name
auth=auth.ip.address
fs=fs.ip.address
ipaddr=your.ip.address
ipgw=your.ip.gw
ipmask=your.ip.mask
authdom=your.auth.dom

Use a cpurc that sets them (I attach mine below)

Then start using your net; eg. this is my Music script:
#!/bin/rc
ip/ipconfig -g your.ip.gw ether /net/ether0 your.ip.addr your.net.mask
srv tcp!your.fs.addr
mount /srv/tcp!your.fs.addr /n/kfs once
bind /n/kfs/active/music /n/music
acme -f $font -F $font -c1

I hope this answers your question. If it does not, drop me a line.

[-- Attachment #2: cpurc --]
[-- Type: text/plain, Size: 3718 bytes --]

#!/bin/rc

debug=0

#set service to terminal (necessary for factotum, handy for everything else)
service=terminal

echo -n terminal > /env/service
echo -n plan9 > /env/site
echo -n astro > /env/facedom
echo -n emelie > /env/fs

bind -a '#y' /dev
bind -a '#F' /dev
bind -a '#I' /net
bind -a '#D' /net

# parallelism for mk
NPROC=1

sysname=`{cat /dev/sysname}
if (~ $sysname ''){
	sysname=bitsy
	echo $sysname>/dev/sysname
}
prompt=($sysname^'# ' '	')

# flavor
fileserver=emelie
cpu=olive

# user defined flash partitions
echo -n add fs		0x0800000 0x1000000 > /dev/flash/flashctl

# so we can see things
light 0

# set variables
if(~ $debug 1) echo ramfs
ramfs
if(~ $debug 1) echo pencal
params -f
if(! grep -s '^calibrate=' /tmp/tmpparams)
	pencal >>/tmp/tmpparams
if not {
	eval `{grep '^calibrate=' /tmp/tmpparams}
	echo calibrate $calibrate > '#m/mousectl'
}
prompter /tmp/tmpparams
params
if(~ $debug 1) {
	echo tmpparams:
	cat /tmp/tmpparams
}
. /tmp/tmpparams

if(~ $debug 1) echo set user
# set userid
if(test -e /env/user){
	echo -n $user > /dev/hostowner
}

if(~ $debug 1) echo start flashfs
# bind in read/write file system
if (aux/flashfs) {
	if (~ $debug 1) echo flashfs started
	mount /srv/brzr /n/tmp
	bind -a /n /n/tmp/n
	bind -a /sys/lib /n/tmp/sys/lib
	bind -a /sys /n/tmp/sys
	bind -a /arm/bin/auth /n/tmp/arm/bin/auth
	bind -a /arm/bin/ndb /n/tmp/arm/bin/ndb
	bind -a /arm/bin/ip /n/tmp/arm/bin/ip
	bind -a /arm/bin/aux /n/tmp/arm/bin/aux
	bind -a /arm/bin /n/tmp/arm/bin
	bind -a /arm /n/tmp/arm
	bind -a /lib/ndb /n/tmp/lib/ndb
	bind -a /lib/font /n/tmp/lib/font
	bind -a /lib /n/tmp/lib
	bind -a / /n/tmp
	bind /n/tmp /
	unmount /n/tmp
} >[2] /dev/null

# start network
if(grep -s WaveLAN/IEEE /dev/pcm0ctl){
	if (~ $debug 1) echo 'configure #l0 wavelan'
	echo -n 'configure #l0 wavelan'>/dev/pcm0ctl
	bind -a '#l0' /net
	switch($wvkey1){
	case ''
		;
	case *
		echo -n 'key1 '^$wvkey1 >/net/ether0/clone
	}
	switch($wvkey2){
	case ''
		;
	case *
		echo -n 'key2 '^$wvkey2 >/net/ether0/clone
	}
	switch($wvkey3){
	case ''
		;
	case *
		echo -n 'key3 '^$wvkey3 >/net/ether0/clone
	}
	switch($wvtxkey){
	case ''
		;
	case *
		echo -n 'txkey '^$wvtxkey >/net/ether0/clone
	}
	switch($wvmode){
	case ''
		;
	case *
		echo -n 'mode '^$wvmode >/net/ether0/clone
	}
	switch($wvibss){
	case ''
		;
	case *
		echo -n 'ibss '^$wvibss >/net/ether0/clone
	}
	switch($wvessid){
	case ''
		;
	case *
		echo -n 'essid '^$wvessid >/net/ether0/clone
	}
	switch($wvcrypt){
	case ''
		;
	case *
		echo -n 'crypt '^$wvcrypt >/net/ether0/clone
	}
	if (~ $debug 1) echo ip/ipconfig -g $gwaddr ether /net/ether0 $ipaddr $ipmask
	ip/ipconfig -g $gwaddr ether /net/ether0 $ipaddr $ipmask
	if(test -e /env/auth)
		echo '	auth='^$auth >>/net/ndb
	if(test -e /env/dns)
		echo '	dns='^$dns >>/net/ndb
	if(test -e /env/dnsdomain)
		echo '	dnsdomain='^$dnsdomain >>/net/ndb
	if(test -e /env/authdom)
		echo '	authdom='^$authdom >>/net/ndb

	if (~ $debug 1) echo ndb/cs
	ndb/cs
	ndb/dns -r
}

auth/factotum -n -s factotum -a $auth

if(! test -e /env/font)
	font=/lib/font/bit/lucidasans/unicode.6.font
if(! test -e /env/tabstop)
	tabstop=2

if (test -d /usr/$user) {
	home=/usr/$user
	cd $home
	if (test -r lib/profile) {
		. lib/profile
		exec /bin/rc
	}
	if (test -r lib/windows) {
		if (~ $debug 1) echo 'exec rio -sk ''/bin/keyboard -l'' -i '$home'/lib/windows'
		exec rio -sk '/bin/keyboard -l -w' -i $home/lib/windows
	}
}
# bind in read/write file system
if (~ $debug 1) echo 'exec rio -sk ''/bin/keyboard -l'''
exec rio -sk '/bin/keyboard -l -w'