* Re: [9fans] ELNK3 and 3CSOHO100-TX
@ 2002-03-07 4:50 jmk
0 siblings, 0 replies; 4+ messages in thread
From: jmk @ 2002-03-07 4:50 UTC (permalink / raw)
To: 9fans
On Wed Mar 6 22:13:13 EST 2002, plan9@itic.ca wrote:
> Hi all,
>
> Did anyone test the recent 3CSOHO100-TX
> The elnk3 drv detects it but it seems that card registers make it crash (no debug output, violent rebbot)...
> On the 9pcfs kernel, a "memory" error message appears on console before rebooting.
>
> The chip is a :
> 3Com 40-0483-004
> 0201T 46919437
> AGERE 40-04834
>
> Any experience ?
No experience, but if it has a PCI device id of 0x7646 then try adding this
to the etherelnk3reset function as I think it is just a 3C905B with a different
device id:
1) in the switch on the device id
switch(did = eepromdata(did, port, 0x03)){
add
case 0x7646:
after the
case 0x9055:
2) later on there is a test for the 905B:
if(did == 0x9055 || did == 0x9200 || did == 0x5157){
(your version may or may not have the tests for 0x9200 and 0x5157)
add a test for 0x7646 here too, e.g.
if(did == 0x9055 || did == 0x7646 || did == 0x9200 || did == 0x5157){
--jim
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] ELNK3 and 3CSOHO100-TX
@ 2002-03-14 15:41 plan9
0 siblings, 0 replies; 4+ messages in thread
From: plan9 @ 2002-03-14 15:41 UTC (permalink / raw)
To: 9fans
As we needed more Plan9 machines, we also modified
/sys/srv/boot/pc/9load and /sys/src/9/pc/etherelnk3.c
accordingly to Jim's advices and it works fine :
* Now the 9load `powered' floppy initialized the 3CSOHO100-TX and get a 9pccpudisk via BOOTP
* The 9pccpud also initialize and uses correctly the card
<plan9@itic.ca> a crit dans le message news:<FIEDLHOOAEHBJAPIKGJCCEKPCAAA.plan9@itic.ca>...
Many Thanks Jim,
It now works.
We have modified /sys/src/fs/plan9pc/etherelnk3.c
The 9pcfs serving through 3CSOHO100-TX worked fine while moving 876.15 MB in both directions (pccpud/kfs<->9fs)
----------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] ELNK3 and 3CSOHO100-TX
@ 2002-03-10 1:06 plan9
0 siblings, 0 replies; 4+ messages in thread
From: plan9 @ 2002-03-10 1:06 UTC (permalink / raw)
To: 9fans
Many Thanks Jim,
It now works.
We have modified /sys/src/fs/plan9pc/etherelnk3.c
The 9pcfs serving through 3CSOHO100-TX worked fine while moving 876.15 MB in both directions (pccpud/kfs<->9fs)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [9fans] ELNK3 and 3CSOHO100-TX
@ 2002-03-07 4:13 Plan9
0 siblings, 0 replies; 4+ messages in thread
From: Plan9 @ 2002-03-07 4:13 UTC (permalink / raw)
To: 9fans
Hi all,
Did anyone test the recent 3CSOHO100-TX
The elnk3 drv detects it but it seems that card registers make it crash (no debug output, violent rebbot)...
On the 9pcfs kernel, a "memory" error message appears on console before rebooting.
The chip is a :
3Com 40-0483-004
0201T 46919437
AGERE 40-04834
Any experience ?
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-03-14 15:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-03-07 4:50 [9fans] ELNK3 and 3CSOHO100-TX jmk
-- strict thread matches above, loose matches on Subject: below --
2002-03-14 15:41 plan9
2002-03-10 1:06 plan9
2002-03-07 4:13 Plan9
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).