* [9fans] USB ethernet driver issue
@ 2010-10-13 13:21 Thorben Krueger
2010-10-13 13:31 ` Francisco J Ballesteros
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 13:21 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
I configured my mobile phone to share all it's connectivity (gprs,
wifi) via usb, i.e., act as a usb router (including a dhcp server).
When I attach it to a linux machine, dmesg says:
usb 2-2: new high speed USB device using ehci_hcd and address 14
cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
cdc_acm 2-2:1.6: ttyACM0: USB ACM device
cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
CDC Ethernet Device, da:fc:05:9a:bd:95
then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
When I attach it to a native plan9 machine and run "usb/ether -D", I
get the following output:
usb/ether: fsioproc pid 212
<- Tversion tag 65535 msize 8216 version '9P2000'
-> Rversion tag 65535 msize 8192 version '9P2000'
<- Tauth tag 6 afid 299 uname glenda aname
-> Rerror tag 6 ename permission denied
<- Tattach tag 6 fid 299 afid -1 uname glenda aname
-> Rattach tag 6 qid (000000000000000 0 d)
usb/ether: startdevs: opening #0 /dev/usb/ep5.0
usb/ether: devmain: no data from device
usb/ether: no unhandled devices found
When I run "usb/usbd", I get:
...
usb/usbd: /dev/usb/ep5.0: no port information
I am pretty much out of ideas here.
Any help?
--
benthor
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 13:21 [9fans] USB ethernet driver issue Thorben Krueger
@ 2010-10-13 13:31 ` Francisco J Ballesteros
2010-10-13 13:42 ` Thorben Krueger
0 siblings, 1 reply; 9+ messages in thread
From: Francisco J Ballesteros @ 2010-10-13 13:31 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
It seems usbd is not getting the descriptors it needs.
You may try running usbd -dd to see which requests
have problems.
We could try to see how to proceed then, depending
on what's going on.
On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
<thkruege@googlemail.com> wrote:
> I configured my mobile phone to share all it's connectivity (gprs,
> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>
> When I attach it to a linux machine, dmesg says:
>
> usb 2-2: new high speed USB device using ehci_hcd and address 14
> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
> CDC Ethernet Device, da:fc:05:9a:bd:95
>
> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>
> When I attach it to a native plan9 machine and run "usb/ether -D", I
> get the following output:
>
> usb/ether: fsioproc pid 212
> <- Tversion tag 65535 msize 8216 version '9P2000'
> -> Rversion tag 65535 msize 8192 version '9P2000'
> <- Tauth tag 6 afid 299 uname glenda aname
> -> Rerror tag 6 ename permission denied
> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
> -> Rattach tag 6 qid (000000000000000 0 d)
> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
> usb/ether: devmain: no data from device
> usb/ether: no unhandled devices found
>
> When I run "usb/usbd", I get:
> ...
> usb/usbd: /dev/usb/ep5.0: no port information
>
> I am pretty much out of ideas here.
>
> Any help?
>
> --
>
> benthor
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 13:31 ` Francisco J Ballesteros
@ 2010-10-13 13:42 ` Thorben Krueger
2010-10-13 13:57 ` Francisco J Ballesteros
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 13:42 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
...
usb/usbd: /dev/usb/ep5.0 starting
usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
usb/usbd: /dev/usb/ep5.0: no port information
usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
What now?
On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
> It seems usbd is not getting the descriptors it needs.
> You may try running usbd -dd to see which requests
> have problems.
> We could try to see how to proceed then, depending
> on what's going on.
>
> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
> <thkruege@googlemail.com> wrote:
>> I configured my mobile phone to share all it's connectivity (gprs,
>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>
>> When I attach it to a linux machine, dmesg says:
>>
>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>
>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>
>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>> get the following output:
>>
>> usb/ether: fsioproc pid 212
>> <- Tversion tag 65535 msize 8216 version '9P2000'
>> -> Rversion tag 65535 msize 8192 version '9P2000'
>> <- Tauth tag 6 afid 299 uname glenda aname
>> -> Rerror tag 6 ename permission denied
>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>> -> Rattach tag 6 qid (000000000000000 0 d)
>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>> usb/ether: devmain: no data from device
>> usb/ether: no unhandled devices found
>>
>> When I run "usb/usbd", I get:
>> ...
>> usb/usbd: /dev/usb/ep5.0: no port information
>>
>> I am pretty much out of ideas here.
>>
>> Any help?
>>
>> --
>>
>> benthor
>>
>>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 13:42 ` Thorben Krueger
@ 2010-10-13 13:57 ` Francisco J Ballesteros
2010-10-13 14:04 ` Thorben Krueger
0 siblings, 1 reply; 9+ messages in thread
From: Francisco J Ballesteros @ 2010-10-13 13:57 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
kill usbd, yes, it's not supported. I mean, if you kill it and it fails,
the man page says that you are not supposed to do that. But do it anyway :)
Then, usb/usbd -dd
and see what happens.
BTW I assume that you are not using a usb kbd/mouse to execute such commands.
If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there.
On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger
<thkruege@googlemail.com> wrote:
> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
> ...
> usb/usbd: /dev/usb/ep5.0 starting
> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
> usb/usbd: /dev/usb/ep5.0: no port information
> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
>
> What now?
>
> On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
>> It seems usbd is not getting the descriptors it needs.
>> You may try running usbd -dd to see which requests
>> have problems.
>> We could try to see how to proceed then, depending
>> on what's going on.
>>
>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
>> <thkruege@googlemail.com> wrote:
>>> I configured my mobile phone to share all it's connectivity (gprs,
>>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>>
>>> When I attach it to a linux machine, dmesg says:
>>>
>>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>>
>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>>
>>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>>> get the following output:
>>>
>>> usb/ether: fsioproc pid 212
>>> <- Tversion tag 65535 msize 8216 version '9P2000'
>>> -> Rversion tag 65535 msize 8192 version '9P2000'
>>> <- Tauth tag 6 afid 299 uname glenda aname
>>> -> Rerror tag 6 ename permission denied
>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>>> -> Rattach tag 6 qid (000000000000000 0 d)
>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>>> usb/ether: devmain: no data from device
>>> usb/ether: no unhandled devices found
>>>
>>> When I run "usb/usbd", I get:
>>> ...
>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>
>>> I am pretty much out of ideas here.
>>>
>>> Any help?
>>>
>>> --
>>>
>>> benthor
>>>
>>>
>>
>>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 13:57 ` Francisco J Ballesteros
@ 2010-10-13 14:04 ` Thorben Krueger
2010-10-13 14:33 ` Thorben Krueger
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 14:04 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
wow, this produces an incredible amount of text... typing it is not an
option... let me see if I can figure something out
On 13 October 2010 15:57, Francisco J Ballesteros <nemo@lsub.org> wrote:
> kill usbd, yes, it's not supported. I mean, if you kill it and it fails,
> the man page says that you are not supposed to do that. But do it anyway :)
>
> Then, usb/usbd -dd
> and see what happens.
>
> BTW I assume that you are not using a usb kbd/mouse to execute such commands.
> If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there.
>
>
> On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger
> <thkruege@googlemail.com> wrote:
>> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
>> ...
>> usb/usbd: /dev/usb/ep5.0 starting
>> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
>> usb/usbd: /dev/usb/ep5.0: no port information
>> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
>>
>> What now?
>>
>> On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>> It seems usbd is not getting the descriptors it needs.
>>> You may try running usbd -dd to see which requests
>>> have problems.
>>> We could try to see how to proceed then, depending
>>> on what's going on.
>>>
>>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
>>> <thkruege@googlemail.com> wrote:
>>>> I configured my mobile phone to share all it's connectivity (gprs,
>>>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>>>
>>>> When I attach it to a linux machine, dmesg says:
>>>>
>>>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>>>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>>>
>>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>>>
>>>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>>>> get the following output:
>>>>
>>>> usb/ether: fsioproc pid 212
>>>> <- Tversion tag 65535 msize 8216 version '9P2000'
>>>> -> Rversion tag 65535 msize 8192 version '9P2000'
>>>> <- Tauth tag 6 afid 299 uname glenda aname
>>>> -> Rerror tag 6 ename permission denied
>>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>>>> -> Rattach tag 6 qid (000000000000000 0 d)
>>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>>>> usb/ether: devmain: no data from device
>>>> usb/ether: no unhandled devices found
>>>>
>>>> When I run "usb/usbd", I get:
>>>> ...
>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>>
>>>> I am pretty much out of ideas here.
>>>>
>>>> Any help?
>>>>
>>>> --
>>>>
>>>> benthor
>>>>
>>>>
>>>
>>>
>>
>>
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 14:04 ` Thorben Krueger
@ 2010-10-13 14:33 ` Thorben Krueger
2010-10-13 14:39 ` Thorben Krueger
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 14:33 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 3103 bytes --]
See attached debug log. (Transfered via USB pendrive from the plan9
machine, so at least that part seems to work)
On 13 October 2010 16:04, Thorben Krueger <thkruege@googlemail.com> wrote:
> wow, this produces an incredible amount of text... typing it is not an
> option... let me see if I can figure something out
>
> On 13 October 2010 15:57, Francisco J Ballesteros <nemo@lsub.org> wrote:
>> kill usbd, yes, it's not supported. I mean, if you kill it and it fails,
>> the man page says that you are not supposed to do that. But do it anyway :)
>>
>> Then, usb/usbd -dd
>> and see what happens.
>>
>> BTW I assume that you are not using a usb kbd/mouse to execute such commands.
>> If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there.
>>
>>
>> On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger
>> <thkruege@googlemail.com> wrote:
>>> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
>>> ...
>>> usb/usbd: /dev/usb/ep5.0 starting
>>> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
>>> usb/usbd: /dev/usb/ep5.0: no port information
>>> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
>>>
>>> What now?
>>>
>>> On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>>> It seems usbd is not getting the descriptors it needs.
>>>> You may try running usbd -dd to see which requests
>>>> have problems.
>>>> We could try to see how to proceed then, depending
>>>> on what's going on.
>>>>
>>>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
>>>> <thkruege@googlemail.com> wrote:
>>>>> I configured my mobile phone to share all it's connectivity (gprs,
>>>>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>>>>
>>>>> When I attach it to a linux machine, dmesg says:
>>>>>
>>>>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>>>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>>>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>>>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>>>>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>>>>
>>>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>>>>
>>>>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>>>>> get the following output:
>>>>>
>>>>> usb/ether: fsioproc pid 212
>>>>> <- Tversion tag 65535 msize 8216 version '9P2000'
>>>>> -> Rversion tag 65535 msize 8192 version '9P2000'
>>>>> <- Tauth tag 6 afid 299 uname glenda aname
>>>>> -> Rerror tag 6 ename permission denied
>>>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>>>>> -> Rattach tag 6 qid (000000000000000 0 d)
>>>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>>>>> usb/ether: devmain: no data from device
>>>>> usb/ether: no unhandled devices found
>>>>>
>>>>> When I run "usb/usbd", I get:
>>>>> ...
>>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>>>
>>>>> I am pretty much out of ideas here.
>>>>>
>>>>> Any help?
>>>>>
>>>>> --
>>>>>
>>>>> benthor
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
[-- Attachment #2: usbdebug --]
[-- Type: application/octet-stream, Size: 7522 bytes --]
usb/usbd: /dev/usb/ep1.0 starting
usb/usbd: opendev 0x609f0 /dev/usb/ep1.0
usb/usbd: /dev/usb/ep1.0: ports 2 maxpkt 64
usb/usbd: hub 0x609b0 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
usb/usbd: /dev/usb/ep2.0 starting
usb/usbd: opendev 0x60b50 /dev/usb/ep2.0
usb/usbd: /dev/usb/ep2.0: ports 2 maxpkt 64
usb/usbd: hub 0x60b10 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
usb/usbd: /dev/usb/ep3.0 starting
usb/usbd: opendev 0x60cb0 /dev/usb/ep3.0
usb/usbd: /dev/usb/ep3.0: ports 2 maxpkt 64
usb/usbd: hub 0x60c70 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
usb/usbd: /dev/usb/ep4.0 starting
usb/usbd: opendev 0x60e10 /dev/usb/ep4.0
usb/usbd: /dev/usb/ep4.0: ports 6 maxpkt 64
usb/usbd: hub 0x60dd0 allocated: ports 6 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
usb/usbd: /dev/usb/ep5.0 starting
usb/usbd: opendev 0x60f90 /dev/usb/ep5.0
usb/usbd: /dev/usb/ep5.0: no port information
usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
usb/usbd: hub 0x60970 allocated: ports 2 pwrms 0 max curr 0 pwrm 0 cmp 0 leds 0
usb/usbd: /dev/usb/ep4.0: port 3 attach sts 0x403
usb/usbd: /dev/usb/ep4.0: port 3: attached status 0x403
usb/usbd: opendev 0x610b0 /dev/usb/ep6.0
usb/usbd; /dev/usb/ep4.0: port 3: maxpkt 64
usb/usbd: parsedev /dev/usb/ep6.0: 12 01 00 02 02 00 00 40 21 04 c8 01 11 02 01 02 00 02
usb/usbd: parseconf 09 02 32 01 0a 02 03 c0 32
usb/usbd: parsedesc interface 4[9] 09 04 00 00 00 02 fe 00 00
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 ab 05 15
usb/usbd: parsedesc desc 24[5] 05 24 06 00 01
usb/usbd: parsedesc interface 4[9] 09 04 01 00 00 0a 00 00 00
usb/usbd: parsedesc interface 4[9] 09 04 01 01 02 0a 00 00 00
usb/usbd: parsedesc endpoint 5[7] 07 05 01 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 81 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 02 00 00 02 0b 00 06
usb/usbd: parsedesc desc 24[5] 05 24 00 20 01
usb/usbd: parsedesc desc 24[5] 05 24 15 00 01
usb/usbd: parsedesc desc 24[5] 05 24 06 02 03
usb/usbd: parsedesc interface 4[9] 09 04 03 00 00 0a 00 00 05
usb/usbd: parsedesc interface 4[9] 09 04 03 01 02 0a 00 00 05
usb/usbd: parsedesc endpoint 5[7] 07 05 82 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 02 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 04 00 00 02 0b 00 07
usb/usbd: parsedesc desc 24[5] 05 24 00 20 01
usb/usbd: parsedesc desc 24[5] 05 24 15 00 01
usb/usbd: parsedesc desc 24[5] 05 24 06 04 05
usb/usbd: parsedesc interface 4[9] 09 04 05 00 00 0a 00 00 05
usb/usbd: parsedesc interface 4[9] 09 04 05 01 02 0a 00 00 05
usb/usbd: parsedesc endpoint 5[7] 07 05 83 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 03 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 06 00 01 02 02 01 08
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 01 00 07
usb/usbd: parsedesc desc 24[4] 04 24 02 02
usb/usbd: parsedesc desc 24[5] 05 24 06 06 07
usb/usbd: parsedesc endpoint 5[7] 07 05 85 03 0a 00 09
usb/usbd: parsedesc interface 4[9] 09 04 07 00 02 0a 00 00 09
usb/usbd: parsedesc endpoint 5[7] 07 05 84 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 04 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 08 00 01 02 06 00 0a
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 06 08 09
usb/usbd: parsedesc desc 24[13] 0d 24 0f 0c 00 00 00 00 ea 05 00 00 00
usb/usbd: parsedesc endpoint 5[7] 07 05 87 03 10 00 09
usb/usbd: parsedesc interface 4[9] 09 04 09 00 00 0a 00 00 00
usb/usbd: parsedesc interface 4[9] 09 04 09 01 02 0a 00 00 0b
usb/usbd: parsedesc endpoint 5[7] 07 05 86 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 05 02 00 02 00
usb/usbd: parseconf 09 02 32 01 0a 02 03 c0 32
usb/usbd: parsedesc interface 4[9] 09 04 00 00 00 02 fe 00 00
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 ab 05 15
usb/usbd: parsedesc desc 24[5] 05 24 06 00 01
usb/usbd: parsedesc interface 4[9] 09 04 01 00 00 0a 00 00 00
usb/usbd: parsedesc interface 4[9] 09 04 01 01 02 0a 00 00 00
usb/usbd: parsedesc endpoint 5[7] 07 05 01 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 81 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 02 00 00 02 0b 00 06
usb/usbd: parsedesc desc 24[5] 05 24 00 20 01
usb/usbd: parsedesc desc 24[5] 05 24 15 00 01
usb/usbd: parsedesc desc 24[5] 05 24 06 02 03
usb/usbd: parsedesc interface 4[9] 09 04 03 00 00 0a 00 00 05
usb/usbd: parsedesc interface 4[9] 09 04 03 01 02 0a 00 00 05
usb/usbd: parsedesc endpoint 5[7] 07 05 82 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 02 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 04 00 00 02 0b 00 07
usb/usbd: parsedesc desc 24[5] 05 24 00 20 01
usb/usbd: parsedesc desc 24[5] 05 24 15 00 01
usb/usbd: parsedesc desc 24[5] 05 24 06 04 05
usb/usbd: parsedesc interface 4[9] 09 04 05 00 00 0a 00 00 05
usb/usbd: parsedesc interface 4[9] 09 04 05 01 02 0a 00 00 05
usb/usbd: parsedesc endpoint 5[7] 07 05 83 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 03 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 06 00 01 02 02 01 08
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 01 00 07
usb/usbd: parsedesc desc 24[4] 04 24 02 02
usb/usbd: parsedesc desc 24[5] 05 24 06 06 07
usb/usbd: parsedesc endpoint 5[7] 07 05 85 03 0a 00 09
usb/usbd: parsedesc interface 4[9] 09 04 07 00 02 0a 00 00 09
usb/usbd: parsedesc endpoint 5[7] 07 05 84 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 04 02 00 02 00
usb/usbd: parsedesc interface 4[9] 09 04 08 00 01 02 06 00 0a
usb/usbd: parsedesc desc 24[5] 05 24 00 10 01
usb/usbd: parsedesc desc 24[5] 05 24 06 08 09
usb/usbd: parsedesc desc 24[13] 0d 24 0f 0c 00 00 00 00 ea 05 00 00 00
usb/usbd: parsedesc endpoint 5[7] 07 05 87 03 10 00 09
usb/usbd: parsedesc interface 4[9] 09 04 09 00 00 0a 00 00 00
usb/usbd: parsedesc interface 4[9] 09 04 09 01 02 0a 00 00 0b
usb/usbd: parsedesc endpoint 5[7] 07 05 86 02 00 02 00
usb/usbd: parsedesc endpoint 5[7] 07 05 05 02 00 02 00
usb/usbd: /dev/usb/ep6.0 csp comms.0.0 vid 0x421 did 0x1c8 refs 1
none <nil> <nil>
conf: cval 2 attrib c0 100 mA
iface csp comms.254.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 1 addr 129 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 1 addr 129 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.11.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 2 addr 2 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 2 addr 2 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.11.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 3 addr 3 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 3 addr 3 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.2.1
alt 0 attr 3 ival 9
ep id 5 addr 5 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp data.0.0
alt 0 attr 2 ival 0
ep id 4 addr 4 usb/usbd: /dev/usb/ep4.0: port 3: configed: /dev/usb/ep6.0
usb/usbd: no configured entry for /dev/usb/ep6.0 (csp 0x000002)
usb/usbd: fsadd usbdctl
usb/usbd: /dev/usb/ep4.0: port 3: detached
usb/usbd: closedev 0x610b0 /dev/usb/ep6.0
usb/usbd: /dev/usb/ep4.0: port 3 attach sts 0x401
usb/usbd: /dev/usb/ep4.0: port 3: not enabled?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 14:33 ` Thorben Krueger
@ 2010-10-13 14:39 ` Thorben Krueger
2010-10-13 15:01 ` Thorben Krueger
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 14:39 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Addendum: My phone also exposes some block devices via usb, although
they only become mountable when I flip a software switch in the phone
(which I didn't).
Maybe that accounts for some of the output
On 13 October 2010 16:33, Thorben Krueger <thkruege@googlemail.com> wrote:
> See attached debug log. (Transfered via USB pendrive from the plan9
> machine, so at least that part seems to work)
>
> On 13 October 2010 16:04, Thorben Krueger <thkruege@googlemail.com> wrote:
>> wow, this produces an incredible amount of text... typing it is not an
>> option... let me see if I can figure something out
>>
>> On 13 October 2010 15:57, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>> kill usbd, yes, it's not supported. I mean, if you kill it and it fails,
>>> the man page says that you are not supposed to do that. But do it anyway :)
>>>
>>> Then, usb/usbd -dd
>>> and see what happens.
>>>
>>> BTW I assume that you are not using a usb kbd/mouse to execute such commands.
>>> If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there.
>>>
>>>
>>> On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger
>>> <thkruege@googlemail.com> wrote:
>>>> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
>>>> ...
>>>> usb/usbd: /dev/usb/ep5.0 starting
>>>> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
>>>>
>>>> What now?
>>>>
>>>> On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>>>> It seems usbd is not getting the descriptors it needs.
>>>>> You may try running usbd -dd to see which requests
>>>>> have problems.
>>>>> We could try to see how to proceed then, depending
>>>>> on what's going on.
>>>>>
>>>>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
>>>>> <thkruege@googlemail.com> wrote:
>>>>>> I configured my mobile phone to share all it's connectivity (gprs,
>>>>>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>>>>>
>>>>>> When I attach it to a linux machine, dmesg says:
>>>>>>
>>>>>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>>>>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>>>>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>>>>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>>>>>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>>>>>
>>>>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>>>>>
>>>>>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>>>>>> get the following output:
>>>>>>
>>>>>> usb/ether: fsioproc pid 212
>>>>>> <- Tversion tag 65535 msize 8216 version '9P2000'
>>>>>> -> Rversion tag 65535 msize 8192 version '9P2000'
>>>>>> <- Tauth tag 6 afid 299 uname glenda aname
>>>>>> -> Rerror tag 6 ename permission denied
>>>>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>>>>>> -> Rattach tag 6 qid (000000000000000 0 d)
>>>>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>>>>>> usb/ether: devmain: no data from device
>>>>>> usb/ether: no unhandled devices found
>>>>>>
>>>>>> When I run "usb/usbd", I get:
>>>>>> ...
>>>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>>>>
>>>>>> I am pretty much out of ideas here.
>>>>>>
>>>>>> Any help?
>>>>>>
>>>>>> --
>>>>>>
>>>>>> benthor
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 14:39 ` Thorben Krueger
@ 2010-10-13 15:01 ` Thorben Krueger
2010-10-13 15:04 ` Francisco J Ballesteros
0 siblings, 1 reply; 9+ messages in thread
From: Thorben Krueger @ 2010-10-13 15:01 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 3829 bytes --]
As an experiment, I rebooted, attached my phone, waited a minute and
ran usb/ether -dd. The output is attached and in many respects similar
to the one produced by usbd.
On 13 October 2010 16:39, Thorben Krueger <thkruege@googlemail.com> wrote:
> Addendum: My phone also exposes some block devices via usb, although
> they only become mountable when I flip a software switch in the phone
> (which I didn't).
>
> Maybe that accounts for some of the output
>
> On 13 October 2010 16:33, Thorben Krueger <thkruege@googlemail.com> wrote:
>> See attached debug log. (Transfered via USB pendrive from the plan9
>> machine, so at least that part seems to work)
>>
>> On 13 October 2010 16:04, Thorben Krueger <thkruege@googlemail.com> wrote:
>>> wow, this produces an incredible amount of text... typing it is not an
>>> option... let me see if I can figure something out
>>>
>>> On 13 October 2010 15:57, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>>> kill usbd, yes, it's not supported. I mean, if you kill it and it fails,
>>>> the man page says that you are not supposed to do that. But do it anyway :)
>>>>
>>>> Then, usb/usbd -dd
>>>> and see what happens.
>>>>
>>>> BTW I assume that you are not using a usb kbd/mouse to execute such commands.
>>>> If you are, then we can set usbdebug in plan9.ini, IIRC, and go from there.
>>>>
>>>>
>>>> On Wed, Oct 13, 2010 at 3:42 PM, Thorben Krueger
>>>> <thkruege@googlemail.com> wrote:
>>>>> Ok, when I reboot (I don't know how to reset usdb) and run usb/usbd -dd I get:
>>>>> ...
>>>>> usb/usbd: /dev/usb/ep5.0 starting
>>>>> usb/usbd: opendev 0x60b90 /dev/usb/ep5.0
>>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>>> usb/usbd: /dev/usb/ep5.0: ports 2 maxpkt 64
>>>>>
>>>>> What now?
>>>>>
>>>>> On 13 October 2010 15:31, Francisco J Ballesteros <nemo@lsub.org> wrote:
>>>>>> It seems usbd is not getting the descriptors it needs.
>>>>>> You may try running usbd -dd to see which requests
>>>>>> have problems.
>>>>>> We could try to see how to proceed then, depending
>>>>>> on what's going on.
>>>>>>
>>>>>> On Wed, Oct 13, 2010 at 3:21 PM, Thorben Krueger
>>>>>> <thkruege@googlemail.com> wrote:
>>>>>>> I configured my mobile phone to share all it's connectivity (gprs,
>>>>>>> wifi) via usb, i.e., act as a usb router (including a dhcp server).
>>>>>>>
>>>>>>> When I attach it to a linux machine, dmesg says:
>>>>>>>
>>>>>>> usb 2-2: new high speed USB device using ehci_hcd and address 14
>>>>>>> cdc_acm 2-2:1.6: This device cannot do calls on its own. It is not a modem.
>>>>>>> cdc_acm 2-2:1.6: ttyACM0: USB ACM device
>>>>>>> cdc_ether 2-2:1.8: usb0: register 'cdc_ether' at usb-0000:00:1d.7-2,
>>>>>>> CDC Ethernet Device, da:fc:05:9a:bd:95
>>>>>>>
>>>>>>> then I simply do "ifconfig usb0 up; dhcpcd usb0" and I have connectivity.
>>>>>>>
>>>>>>> When I attach it to a native plan9 machine and run "usb/ether -D", I
>>>>>>> get the following output:
>>>>>>>
>>>>>>> usb/ether: fsioproc pid 212
>>>>>>> <- Tversion tag 65535 msize 8216 version '9P2000'
>>>>>>> -> Rversion tag 65535 msize 8192 version '9P2000'
>>>>>>> <- Tauth tag 6 afid 299 uname glenda aname
>>>>>>> -> Rerror tag 6 ename permission denied
>>>>>>> <- Tattach tag 6 fid 299 afid -1 uname glenda aname
>>>>>>> -> Rattach tag 6 qid (000000000000000 0 d)
>>>>>>> usb/ether: startdevs: opening #0 /dev/usb/ep5.0
>>>>>>> usb/ether: devmain: no data from device
>>>>>>> usb/ether: no unhandled devices found
>>>>>>>
>>>>>>> When I run "usb/usbd", I get:
>>>>>>> ...
>>>>>>> usb/usbd: /dev/usb/ep5.0: no port information
>>>>>>>
>>>>>>> I am pretty much out of ideas here.
>>>>>>>
>>>>>>> Any help?
>>>>>>>
>>>>>>> --
>>>>>>>
>>>>>>> benthor
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>
[-- Attachment #2: usbetherdump.txt --]
[-- Type: text/plain, Size: 6326 bytes --]
term% usb/ether -dd
finddevs: /dev/usb/ep5.0
usb/ether: startdevs: opening #0 /dev/usb/ep5.0
usb/ether: opendev 0x55a68 /dev/usb/ep5.0
usb/ether: parsedev /dev/usb/ep5.0: 12 01 00 02 02 00 00 40 21 04 c8 01 11 02 01 02 00 02
usb/ether: parseconf 09 02 32 01 0a 01 03 80 fa
usb/ether: parsedesc interface 4[9] 09 04 00 00 00 02 fe 00 00
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 ab 05 15
usb/ether: parsedesc desc 24[5] 05 24 06 00 01
usb/ether: parsedesc interface 4[9] 09 04 01 00 00 0a 00 00 00
usb/ether: parsedesc interface 4[9] 09 04 01 01 02 0a 00 00 00
usb/ether: parsedesc endpoint 5[7] 07 05 01 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 81 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 02 00 00 02 0b 00 06
usb/ether: parsedesc desc 24[5] 05 24 00 20 01
usb/ether: parsedesc desc 24[5] 05 24 15 00 01
usb/ether: parsedesc desc 24[5] 05 24 06 02 03
usb/ether: parsedesc interface 4[9] 09 04 03 00 00 0a 00 00 05
usb/ether: parsedesc interface 4[9] 09 04 03 01 02 0a 00 00 05
usb/ether: parsedesc endpoint 5[7] 07 05 82 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 02 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 04 00 00 02 0b 00 07
usb/ether: parsedesc desc 24[5] 05 24 00 20 01
usb/ether: parsedesc desc 24[5] 05 24 15 00 01
usb/ether: parsedesc desc 24[5] 05 24 06 04 05
usb/ether: parsedesc interface 4[9] 09 04 05 00 00 0a 00 00 05
usb/ether: parsedesc interface 4[9] 09 04 05 01 02 0a 00 00 05
usb/ether: parsedesc endpoint 5[7] 07 05 83 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 03 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 06 00 01 02 02 01 08
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 01 00 07
usb/ether: parsedesc desc 24[4] 04 24 02 02
usb/ether: parsedesc desc 24[5] 05 24 06 06 07
usb/ether: parsedesc endpoint 5[7] 07 05 85 03 0a 00 09
usb/ether: parsedesc interface 4[9] 09 04 07 00 02 0a 00 00 09
usb/ether: parsedesc endpoint 5[7] 07 05 84 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 04 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 08 00 01 02 06 00 0a
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 06 08 09
usb/ether: parsedesc desc 24[13] 0d 24 0f 0c 00 00 00 00 ea 05 00 00 00
usb/ether: parsedesc endpoint 5[7] 07 05 87 03 10 00 09
usb/ether: parsedesc interface 4[9] 09 04 09 00 00 0a 00 00 00
usb/ether: parsedesc interface 4[9] 09 04 09 01 02 0a 00 00 0b
usb/ether: parsedesc endpoint 5[7] 07 05 86 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 05 02 00 02 00
usb/ether: parseconf 09 02 32 01 0a 02 03 c0 32
usb/ether: parsedesc interface 4[9] 09 04 00 00 00 02 fe 00 00
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 ab 05 15
usb/ether: parsedesc desc 24[5] 05 24 06 00 01
usb/ether: parsedesc interface 4[9] 09 04 01 00 00 0a 00 00 00
usb/ether: parsedesc interface 4[9] 09 04 01 01 02 0a 00 00 00
usb/ether: parsedesc endpoint 5[7] 07 05 01 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 81 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 02 00 00 02 0b 00 06
usb/ether: parsedesc desc 24[5] 05 24 00 20 01
usb/ether: parsedesc desc 24[5] 05 24 15 00 01
usb/ether: parsedesc desc 24[5] 05 24 06 02 03
usb/ether: parsedesc interface 4[9] 09 04 03 00 00 0a 00 00 05
usb/ether: parsedesc interface 4[9] 09 04 03 01 02 0a 00 00 05
usb/ether: parsedesc endpoint 5[7] 07 05 82 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 02 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 04 00 00 02 0b 00 07
usb/ether: parsedesc desc 24[5] 05 24 00 20 01
usb/ether: parsedesc desc 24[5] 05 24 15 00 01
usb/ether: parsedesc desc 24[5] 05 24 06 04 05
usb/ether: parsedesc interface 4[9] 09 04 05 00 00 0a 00 00 05
usb/ether: parsedesc interface 4[9] 09 04 05 01 02 0a 00 00 05
usb/ether: parsedesc endpoint 5[7] 07 05 83 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 03 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 06 00 01 02 02 01 08
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 01 00 07
usb/ether: parsedesc desc 24[4] 04 24 02 02
usb/ether: parsedesc desc 24[5] 05 24 06 06 07
usb/ether: parsedesc endpoint 5[7] 07 05 85 03 0a 00 09
usb/ether: parsedesc interface 4[9] 09 04 07 00 02 0a 00 00 09
usb/ether: parsedesc endpoint 5[7] 07 05 84 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 04 02 00 02 00
usb/ether: parsedesc interface 4[9] 09 04 08 00 01 02 06 00 0a
usb/ether: parsedesc desc 24[5] 05 24 00 10 01
usb/ether: parsedesc desc 24[5] 05 24 06 08 09
usb/ether: parsedesc desc 24[13] 0d 24 0f 0c 00 00 00 00 ea 05 00 00 00
usb/ether: parsedesc endpoint 5[7] 07 05 87 03 10 00 09
usb/ether: parsedesc interface 4[9] 09 04 09 00 00 0a 00 00 00
usb/ether: parsedesc interface 4[9] 09 04 09 01 02 0a 00 00 0b
usb/ether: parsedesc endpoint 5[7] 07 05 86 02 00 02 00
usb/ether: parsedesc endpoint 5[7] 07 05 05 02 00 02 00
usb/ether: /dev/usb/ep5.0 csp comms.0.0 vid 0x421 did 0x1c8 refs 1
none <nil> <nil>
conf: cval 1 attrib 80 500 mA
iface csp comms.254.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 1 addr 129 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 1 addr 129 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.11.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 2 addr 2 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 2 addr 2 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.11.0
alt 0 attr 0 ival 0
iface csp data.0.0
alt 0 attr 0 ival 0
alt 1 attr 2 ival 0
ep id 3 addr 3 dir inout type bulk itype 0 maxpkt 512 ntds 1
ep id 3 addr 3 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp comms.2.1
alt 0 attr 3 ival 9
ep id 5 addr 5 dir inout type bulk itype 0 maxpkt 512 ntds 1
iface csp data.0.0
alt 0 attr 2 ival 0
ep id 4 addr 4 ether debug on
usb/ether: closedev 0x55a68 /dev/usb/ep5.0
usb/ether: devmain: no data from device
usb/ether: no unhandled devices found
term%
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9fans] USB ethernet driver issue
2010-10-13 15:01 ` Thorben Krueger
@ 2010-10-13 15:04 ` Francisco J Ballesteros
0 siblings, 0 replies; 9+ messages in thread
From: Francisco J Ballesteros @ 2010-10-13 15:04 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Let's proceed off list, to save traffic.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-10-13 15:04 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-13 13:21 [9fans] USB ethernet driver issue Thorben Krueger
2010-10-13 13:31 ` Francisco J Ballesteros
2010-10-13 13:42 ` Thorben Krueger
2010-10-13 13:57 ` Francisco J Ballesteros
2010-10-13 14:04 ` Thorben Krueger
2010-10-13 14:33 ` Thorben Krueger
2010-10-13 14:39 ` Thorben Krueger
2010-10-13 15:01 ` Thorben Krueger
2010-10-13 15:04 ` Francisco J Ballesteros
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).