* [9fans] Crash on Installing SMP System
@ 2001-03-20 14:28 Eric V Van hensbergen
2001-03-20 20:00 ` Jason Gurtz
0 siblings, 1 reply; 3+ messages in thread
From: Eric V Van hensbergen @ 2001-03-20 14:28 UTC (permalink / raw)
To: 9fans
I know I've seen this sort of crash before, but I scanned the list archives
and couldn't find any reference.
...
sd53c8xx: bios scntl3(00) stest2(00)
cpu0: 858Mhz GenuineIntel Pentium III/Xeon
#l0: i82557
sd53c8XX: SYM53C896 rev 0x07 intr 7
sd53c8XX: SYM53C896 rev 0x07 intr 9
cpu0: registers for genrandom 2
FLAGS=10286 TRAP=E ECODE=0 PC=801737AF SS=DEAD USP=8019235F
AX F000E987 BX 80076010 CX F000EF6F DX 8000001C
SI 80004000 DI FA800000 BP 00002000
CS 0010 DS 0008 ES 0008 FS 001B GS 001B
CR0 80010039 CR2 f000f013 CR3 000020000 CR4 00000050
MCA 00000000 MCT 00000000
ur 80075e34 up 8029d534
panic: fault: 0xf000f013
Its a dual processor Xeon system, I get this error with the floppy produced from the web page.
Anybody seen this before?
-eric
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [9fans] Crash on Installing SMP System
2001-03-20 14:28 [9fans] Crash on Installing SMP System Eric V Van hensbergen
@ 2001-03-20 20:00 ` Jason Gurtz
0 siblings, 0 replies; 3+ messages in thread
From: Jason Gurtz @ 2001-03-20 20:00 UTC (permalink / raw)
To: 9fans
> ...I get this error with the
> floppy produced from the web page.
> Anybody seen this before?
I had issues whith the install floppy hanging. Re-writing the disk in a
different drive seemed to cure the problem. May not help you but it'd be
worth a shot. There was mention at that time of possible floppy driver bug
or somthing; I don't recall if anything came of it.
> -eric
~jason
--
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [9fans] Crash on Installing SMP System
@ 2001-03-21 1:36 jmk
0 siblings, 0 replies; 3+ messages in thread
From: jmk @ 2001-03-21 1:36 UTC (permalink / raw)
To: 9fans
On Tue Mar 20 09:29:23 EST 2001, bergevan@us.ibm.com wrote:
> I know I've seen this sort of crash before, but I scanned the list archives
> and couldn't find any reference.
>
> ...
> sd53c8xx: bios scntl3(00) stest2(00)
> cpu0: 858Mhz GenuineIntel Pentium III/Xeon
> #l0: i82557
> sd53c8XX: SYM53C896 rev 0x07 intr 7
> sd53c8XX: SYM53C896 rev 0x07 intr 9
>
> cpu0: registers for genrandom 2
> FLAGS=10286 TRAP=E ECODE=0 PC=801737AF SS=DEAD USP=8019235F
> AX F000E987 BX 80076010 CX F000EF6F DX 8000001C
> SI 80004000 DI FA800000 BP 00002000
> CS 0010 DS 0008 ES 0008 FS 001B GS 001B
> CR0 80010039 CR2 f000f013 CR3 000020000 CR4 00000050
> MCA 00000000 MCT 00000000
> ur 80075e34 up 8029d534
> panic: fault: 0xf000f013
>
> Its a dual processor Xeon system, I get this error with the floppy produced from the web page.
> Anybody seen this before?
>
> -eric
Looks like a PCI device at either 0xF000E000 or 0xF000F000 didn't
get mapped properly. Can you find out which device is mapped there and
what the PC points to? Was this with SMP enabled in plan9.ini?
--jim
p.s. how's the new job?
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-03-21 1:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-20 14:28 [9fans] Crash on Installing SMP System Eric V Van hensbergen
2001-03-20 20:00 ` Jason Gurtz
2001-03-21 1:36 jmk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).