[9fans] Change of plan9 partition size

[9fans] Change of plan9 partition size

[Pavel Klinkovský]

[-- Attachment #1: Type: text/plain, Size: 361 bytes --]

>
> Once you have that, you can run it on Plan 9 on the Raspberry Pi to
> bootstrap the current release of go.
>

Another stupid question - sorry for that ;)...

9pi has about 1,7GB plan9 partition size.
On my 8GB SD card the rest is unused...

Is there a way how to extended plan9 partition to use the whole SD space?

Thanks in advance.

Pavel

[-- Attachment #2: Type: text/html, Size: 691 bytes --]

Re: [9fans] Change of plan9 partition size

[Pavel Klinkovský]

[-- Attachment #1: Type: text/plain, Size: 168 bytes --]

>
> 9pi has about 1,7GB plan9 partition size.
> On my 8GB SD card the rest is unused...
>

Maybe it would be wise to use Venti on that unsed space... ;)

Pavel

[-- Attachment #2: Type: text/html, Size: 522 bytes --]

Re: [9fans] Change of plan9 partition size

[fgergo]

On Thu, Oct 12, 2017 at 11:33 AM, Pavel Klinkovský
<pavel.klinkovsky@gmail.com> wrote:
>> 9pi has about 1,7GB plan9 partition size.
>> On my 8GB SD card the rest is unused...
>
>
> Maybe it would be wise to use Venti on that unsed space... ;)
>
> Pavel
>

If you don't have a venti server somewhere near your pi yet, then
definitely yes.

Re: [9fans] Change of plan9 partition size

[Pavel Klinkovský]

[-- Attachment #1: Type: text/plain, Size: 447 bytes --]

>
> > Maybe it would be wise to use Venti on that unsed space... ;)
>
> If you don't have a venti server somewhere near your pi yet, then
> definitely yes.
>

It will be a fight... ;)

I just created a new partition of PLAN9 type there (according to
https://9p.io/wiki/plan9/setting_up_Venti/index.html), saved and rebooted...

...and system failed to boot:

boot: can't connect to file server: '/boot/kfs' does not exists

Pavel

[-- Attachment #2: Type: text/html, Size: 942 bytes --]

Re: [9fans] Change of plan9 partition size

[Pavel Klinkovský]

[-- Attachment #1: Type: text/plain, Size: 361 bytes --]

>
> I just created a new partition of PLAN9 type there (according to
> https://9p.io/wiki/plan9/setting_up_Venti/index.html), saved and
> rebooted...
>
> ...and system failed to boot:
>
> boot: can't connect to file server: '/boot/kfs' does not exists
>

It seems the boot process does not like two PLAN9 partitions on SD.
Not clear why...

Pavel

[-- Attachment #2: Type: text/html, Size: 849 bytes --]

Re: [9fans] Change of plan9 partition size

[Pavel Klinkovský]

[-- Attachment #1: Type: text/plain, Size: 535 bytes --]

>
> I just created a new partition of PLAN9 type there (according to
>> https://9p.io/wiki/plan9/setting_up_Venti/index.html), saved and
>> rebooted...
>>
>> ...and system failed to boot:
>>
>> boot: can't connect to file server: '/boot/kfs' does not exists
>>
>
> It seems the boot process does not like two PLAN9 partitions on SD.
>

I was wrong.
The problem is in disk/fdisk which probably damaged the partition table
disabling subsequent reboot.

If I partitioned SD under Linux, the problem was over...

Pavel

[-- Attachment #2: Type: text/html, Size: 1273 bytes --]

[9fans] Change of plan9 partition size

[Ole-Hjalmar Kristensen]

I would be careful with running Venti on a SD card. Venti eats SD cards,
USB sticks and even SSD disks for breakfast, since the index is heavily
modified, and will rot after a while. Your actual data (arenas) will be
fine, though, so you can recover by rebuilding the index somewhere else.
Been there, done that...

Ole-Hj.

On Thu, Oct 12, 2017 at 12:26 PM, <fgergo at gmail.com> wrote:

> On Thu, Oct 12, 2017 at 11:33 AM, Pavel Klinkovsk?
> <pavel.klinkovsky at gmail.com> wrote:
> >> 9pi has about 1,7GB plan9 partition size.
> >> On my 8GB SD card the rest is unused...
> >
> >
> > Maybe it would be wise to use Venti on that unsed space... ;)
> >
> > Pavel
> >
>
> If you don't have a venti server somewhere near your pi yet, then
> definitely yes.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.9fans.net/private/9fans/attachments/20171106/7726be1a/attachment.html>