Re: [9fans] ne2000 compatible pci NIC?

Re: [9fans] ne2000 compatible pci NIC?

[jmk]

etherX=type=ne2000 port=P irq=I

where P and I are extracted from the PCI config space somehow.

On Sat Nov 17 22:56:23 EST 2001, ishwar@pali.cps.cmich.edu wrote:
>
> What would a plan9.ini entry for such a card be? (naively assuming
> that it might work.)
>
> -ishwar

Re: [9fans] ne2000 compatible pci NIC?

[Ish Rattan]

On Sat, 17 Nov 2001 jmk@plan9.bell-labs.com wrote:

> etherX=type=ne2000 port=P irq=I
>
> where P and I are extracted from the PCI config space somehow.
>

I tried the above line (with a fresh download of 9fdisk.fd). The card
is not detected at all. So, I tried the card under Linux, it comes up
as Realtek|RTL-8093(AS) and ne2k-pci.

Documentation claims that it is ne2000 compatible pci card (SMC EZ
Ether Card).

-ishwar

Re: [9fans] ne2000 compatible pci NIC?

[Ish Rattan]

On Sat, 17 Nov 2001 jmk@plan9.bell-labs.com wrote:

> etherX=type=ne2000 port=P irq=I
>
> where P and I are extracted from the PCI config space somehow.

The card is detected with Nigel's ether2000.c! Detects as
RealTek 8093 PCI card at irq 10..

Is there anyway for it to make install floppy '9pcflop.gz'?

What are the steps tp put an install floppy image together???

-ishwar

Re: [9fans] ne2000 compatible pci NIC?

[Russ Cox]

Did you try the driver that nigel posted?
http://www.9fs.org/dist/ether/ether2000.c

Re: [9fans] ne2000 compatible pci NIC?

[okamoto]

>Try http://www.9fs.org/dist/ether/ether2000.c. It will recognise

Do you have that driver for /sys/src/boot/pc/ether200.c?

Kenji

Re: [9fans] ne2000 compatible pci NIC?

[nigel]

[-- Attachment #1: Type: text/plain, Size: 208 bytes --]

Is there really no PCI version of ether2000.c yet?

Try http://www.9fs.org/dist/ether/ether2000.c. It will recognise
most PCI NE2000 cards, and autoconfigure. All you then need is

etherX=type=ne2000


[-- Attachment #2: Type: message/rfc822, Size: 1438 bytes --]

From: jmk@plan9.bell-labs.com
To: 9fans@cse.psu.edu
Subject: Re: [9fans] ne2000 compatible pci NIC?
Date: Sat, 17 Nov 2001 23:05:09 -0500
Message-ID: <20011118040512.0442B199EA@mail.cse.psu.edu>

etherX=type=ne2000 port=P irq=I

where P and I are extracted from the PCI config space somehow.

On Sat Nov 17 22:56:23 EST 2001, ishwar@pali.cps.cmich.edu wrote:
>
> What would a plan9.ini entry for such a card be? (naively assuming
> that it might work.)
>
> -ishwar

[9fans] ne2000 compatible pci NIC?

[Ish Rattan]

What would a plan9.ini entry for such a card be? (naively assuming
that it might work.)

-ishwar