* Cannot forward messages: no such coding system - koi8-r
@ 2000-05-02 16:06 Dmitry Yaitskov
2000-05-02 16:41 ` Shenghuo ZHU
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-02 16:06 UTC (permalink / raw)
Hi,
This problem is in gnus-5.8.6. It was not present in 5.8.2 and
earlier.
The problem occurs when I try to mail forward anything. I am using
XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
koi8-r. It all worked just fine till recently, in 5.8.4 there were
similar problems when I tried to forward messages containing
`Content-Type: text/plain; charset=koi8-r' as one of the headers (I
could forward after deleting that header), but now I'm stuck - I
cannot forward any messages at all. (Sending works fine even with
koi8-r). Please, I'll appreciate any ideas. Thanks.
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-02 16:06 Cannot forward messages: no such coding system - koi8-r Dmitry Yaitskov
@ 2000-05-02 16:41 ` Shenghuo ZHU
2000-05-02 19:13 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Shenghuo ZHU @ 2000-05-02 16:41 UTC (permalink / raw)
>>>>> "DY" == Dmitry Yaitskov <dimas@home.com> writes:
DY> Hi,
DY> This problem is in gnus-5.8.6. It was not present in 5.8.2 and
DY> earlier.
DY> The problem occurs when I try to mail forward anything. I am using
DY> XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
DY> koi8-r. It all worked just fine till recently, in 5.8.4 there were
DY> similar problems when I tried to forward messages containing
DY> `Content-Type: text/plain; charset=koi8-r' as one of the headers (I
DY> could forward after deleting that header), but now I'm stuck - I
DY> cannot forward any messages at all. (Sending works fine even with
DY> koi8-r). Please, I'll appreciate any ideas. Thanks.
Could you (setq debug-on-error t) and send the backtrace?
--
Shenghuo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-02 16:41 ` Shenghuo ZHU
@ 2000-05-02 19:13 ` Dmitry Yaitskov
2000-05-03 2:06 ` Shenghuo ZHU
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-02 19:13 UTC (permalink / raw)
Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> >>>>> "DY" == Dmitry Yaitskov <dimas@home.com> writes:
>
> DY> Hi,
> DY> This problem is in gnus-5.8.6. It was not present in 5.8.2 and
> DY> earlier.
>
> DY> The problem occurs when I try to mail forward anything. I am using
> DY> XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
> DY> koi8-r. It all worked just fine till recently, in 5.8.4 there were
> DY> similar problems when I tried to forward messages containing
> DY> `Content-Type: text/plain; charset=koi8-r' as one of the headers (I
> DY> could forward after deleting that header), but now I'm stuck - I
> DY> cannot forward any messages at all. (Sending works fine even with
> DY> koi8-r). Please, I'll appreciate any ideas. Thanks.
>
> Could you (setq debug-on-error t) and send the backtrace?
Here it is:
Signaling: (error "No such coding system" koi8-r)
mm-encode-coding-region(1 816 koi8-r)
mail-encode-encoded-word-buffer()
mml-to-mime()
mml-generate-mime-1((mml (type . "message/rfc822") (disposition . "inline") (contents . "X-From-Line: dima@apexsc.com Sun May 02 15:07:08 2000\nReturn-Path: <dima@apexsc.com>\nReceived: from lucy.mtth1.on.wave.home.com ([24.65.46.137])\n by mail.rdc2.on.home.com (InterMail vM.4.01.02.17 201-229-119)\n with SMTP\n id <20000502190708.BDRH12247.mail.rdc2.on.home.com@lucy.mtth1.on.wave.home.com>\n for <dimas@home.com>; Tue, 2 May 2000 12:07:08 -0700\nTo: dimas@home.com\nSubject: test\nFrom: Dmitry Yaitskov <dima@apexsc.com>\nOrganization: Apex Software Corp.\nDate: 02 May 2000 15:07:08 -0400\nX-Gnus-Mail-Source: pop:dimas@mail\nMessage-ID: <87n1m8db4z.fsf@lucy.mtth1.on.wave.home.com>\nUser-Agent: Gnus/5.0806 (Gnus v5.8.6) XEmacs/21.2 (Kastor & Polydeukes)\nLines: 6\nXref: lucy.mtth1.on.wave.home.com Mail.apex:2326\n\nthis is a test.\n\n-- \nCheers,\n-Dima.\n\n")))
mml-generate-mime-1((multipart (type . "mixed") (mml (type . "message/rfc822") (disposition . "inline") (contents . "X-From-Line: dima@apexsc.com Sun May 02 15:07:08 2000\nReturn-Path: <dima@apexsc.com>\nReceived: from lucy.mtth1.on.wave.home.com ([24.65.46.137])\n by mail.rdc2.on.home.com (InterMail vM.4.01.02.17 201-229-119)\n with SMTP\n id <20000502190708.BDRH12247.mail.rdc2.on.home.com@lucy.mtth1.on.wave.home.com>\n for <dimas@home.com>; Tue, 2 May 2000 12:07:08 -0700\nTo: dimas@home.com\nSubject: test\nFrom: Dmitry Yaitskov <dima@apexsc.com>\nOrganization: Apex Software Corp.\nDate: 02 May 2000 15:07:08 -0400\nX-Gnus-Mail-Source: pop:dimas@mail\nMessage-ID: <87n1m8db4z.fsf@lucy.mtth1.on.wave.home.com>\nUser-Agent: Gnus/5.0806 (Gnus v5.8.6) XEmacs/21.2 (Kastor & Polydeukes)\nLines: 6\nXref: lucy.mtth1.on.wave.home.com Mail.apex:2326\n\nthis is a test.\n\n-- \nCheers,\n-Dima.\n\n")) (part (type . "text/plain") (contents . "\n\n-- \nC
h!
eers,\n-Dima.\n"))))
mml-generate-mime()
message-encode-message-body()
message-send-mail(nil)
message-send-via-mail(nil)
message-send(nil)
message-send-and-exit(nil)
call-interactively(message-send-and-exit)
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-02 19:13 ` Dmitry Yaitskov
@ 2000-05-03 2:06 ` Shenghuo ZHU
2000-05-03 5:20 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Shenghuo ZHU @ 2000-05-03 2:06 UTC (permalink / raw)
>>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
Dmitry> Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
>> >>>>> "DY" == Dmitry Yaitskov <dimas@home.com> writes:
>>
DY> Hi,
DY> This problem is in gnus-5.8.6. It was not present in 5.8.2 and
DY> earlier.
>>
DY> The problem occurs when I try to mail forward anything. I am using
DY> XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
DY> koi8-r. It all worked just fine till recently, in 5.8.4 there were
DY> similar problems when I tried to forward messages containing
DY> `Content-Type: text/plain; charset=koi8-r' as one of the headers (I
DY> could forward after deleting that header), but now I'm stuck - I
DY> cannot forward any messages at all. (Sending works fine even with
DY> koi8-r). Please, I'll appreciate any ideas. Thanks.
>>
>> Could you (setq debug-on-error t) and send the backtrace?
Dmitry> Here it is:
Dmitry> Signaling: (error "No such coding system" koi8-r)
Dmitry> mm-encode-coding-region(1 816 koi8-r)
[...]
I've located the bug. Please check out the latest CVS version and test
it again.
--
Shenghuo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 2:06 ` Shenghuo ZHU
@ 2000-05-03 5:20 ` Dmitry Yaitskov
2000-05-03 13:34 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-03 5:20 UTC (permalink / raw)
Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> >>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
>
> Dmitry> Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> >> >>>>> "DY" == Dmitry Yaitskov <dimas@home.com> writes:
> >>
> DY> Hi,
> DY> This problem is in gnus-5.8.6. It was not present in 5.8.2 and
> DY> earlier.
> >>
> DY> The problem occurs when I try to mail forward anything. I am using
> DY> XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
> DY> koi8-r. It all worked just fine till recently, in 5.8.4 there were
> DY> similar problems when I tried to forward messages containing
> DY> `Content-Type: text/plain; charset=koi8-r' as one of the headers (I
> DY> could forward after deleting that header), but now I'm stuck - I
> DY> cannot forward any messages at all. (Sending works fine even with
> DY> koi8-r). Please, I'll appreciate any ideas. Thanks.
> >>
> >> Could you (setq debug-on-error t) and send the backtrace?
>
> Dmitry> Here it is:
>
> Dmitry> Signaling: (error "No such coding system" koi8-r)
> Dmitry> mm-encode-coding-region(1 816 koi8-r)
>
> [...]
>
>
> I've located the bug. Please check out the latest CVS version and test
> it again.
After updating gnus from CVS to 5.8.7, I can't not only forward, but
even simply post messages. With the same error (no such coding system:
koi8-r). When forwarding, I got exactly same backtrace. I had to
revert to 5.8.6 to post this message.
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 5:20 ` Dmitry Yaitskov
@ 2000-05-03 13:34 ` Dmitry Yaitskov
2000-05-03 15:56 ` Shenghuo ZHU
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-03 13:34 UTC (permalink / raw)
After cvs update this morning, I again can mail using 5.8.7 (thanks!)
but I still can not mail forward. Any ideas?
Dmitry Yaitskov <dimas@home.com> wrote:
> Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
>
> > >>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
> >
> > Dmitry> Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> > >> >>>>> "DY" == Dmitry Yaitskov <dimas@home.com> writes:
> > >>
> > DY> Hi,
> > DY> This problem is in gnus-5.8.6. It was not present in 5.8.2 and
> > DY> earlier.
> > >>
> > DY> The problem occurs when I try to mail forward anything. I am using
> > DY> XEmacs 21.2.b32 *without* MULE, have message-default-charset set to
> > DY> koi8-r. It all worked just fine till recently, in 5.8.4 there were
> > DY> similar problems when I tried to forward messages containing
> > DY> `Content-Type: text/plain; charset=koi8-r' as one of the headers (I
> > DY> could forward after deleting that header), but now I'm stuck - I
> > DY> cannot forward any messages at all. (Sending works fine even with
> > DY> koi8-r). Please, I'll appreciate any ideas. Thanks.
> > >>
> > >> Could you (setq debug-on-error t) and send the backtrace?
> >
> > Dmitry> Here it is:
> >
> > Dmitry> Signaling: (error "No such coding system" koi8-r)
> > Dmitry> mm-encode-coding-region(1 816 koi8-r)
> >
> > [...]
> >
> >
> > I've located the bug. Please check out the latest CVS version and test
> > it again.
>
> After updating gnus from CVS to 5.8.7, I can't not only forward, but
> even simply post messages. With the same error (no such coding system:
> koi8-r). When forwarding, I got exactly same backtrace. I had to
> revert to 5.8.6 to post this message.
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 13:34 ` Dmitry Yaitskov
@ 2000-05-03 15:56 ` Shenghuo ZHU
2000-05-03 17:55 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Shenghuo ZHU @ 2000-05-03 15:56 UTC (permalink / raw)
>>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
Dmitry> After cvs update this morning, I again can mail using 5.8.7
Dmitry> (thanks!) but I still can not mail forward. Any ideas?
Now, it is hopefully fixed. Please verify it.
--
Shenghuo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 15:56 ` Shenghuo ZHU
@ 2000-05-03 17:55 ` Dmitry Yaitskov
2000-05-03 18:49 ` Shenghuo ZHU
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-03 17:55 UTC (permalink / raw)
Shenghuo,
Thanks - it is MUCH better now! IOW, both mail forward and send mail
work. It also works fine if I have Russian text inside messages.
There is one problem though - if I have Russian text in the header (I
tried Subject:, not sure about others), the message is not sent, with
the following error:
Signaling: (error "No such coding system" iso-8859-5)
mm-encode-coding-region(57 71 iso-8859-5)
rfc2047-encode(57 71 cyrillic-iso8859-5)
rfc2047-encode-region(20 72)
mail-encode-encoded-word-buffer()
message-send-mail(nil)
message-send-via-mail(nil)
message-send(nil)
message-send-and-exit(nil)
call-interactively(message-send-and-exit)
It could be due to problems in my setup, but I'd appreciate pointers
as to what to look at. Thanks.
Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> >>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
>
> Dmitry> After cvs update this morning, I again can mail using 5.8.7
> Dmitry> (thanks!) but I still can not mail forward. Any ideas?
>
> Now, it is hopefully fixed. Please verify it.
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 17:55 ` Dmitry Yaitskov
@ 2000-05-03 18:49 ` Shenghuo ZHU
2000-05-03 20:04 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Shenghuo ZHU @ 2000-05-03 18:49 UTC (permalink / raw)
>>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
Dmitry> Shenghuo,
Dmitry> Thanks - it is MUCH better now! IOW, both mail forward and send mail
Dmitry> work. It also works fine if I have Russian text inside messages.
Dmitry> There is one problem though - if I have Russian text in the header (I
Dmitry> tried Subject:, not sure about others), the message is not sent, with
Dmitry> the following error:
Dmitry> Signaling: (error "No such coding system" iso-8859-5)
Dmitry> mm-encode-coding-region(57 71 iso-8859-5)
Dmitry> rfc2047-encode(57 71 cyrillic-iso8859-5)
Dmitry> rfc2047-encode-region(20 72)
Dmitry> mail-encode-encoded-word-buffer()
Dmitry> message-send-mail(nil)
Dmitry> message-send-via-mail(nil)
Dmitry> message-send(nil)
Dmitry> message-send-and-exit(nil)
Dmitry> call-interactively(message-send-and-exit)
It is a bug. Now, it is fixed. I also did another fix so that the
messages will be encoded as koi8-r instead of iso-8859-5 if
message-default-charset is koi8-r. Please verify both.
--
Shenghuo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 18:49 ` Shenghuo ZHU
@ 2000-05-03 20:04 ` Dmitry Yaitskov
2000-05-03 20:21 ` Shenghuo ZHU
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-03 20:04 UTC (permalink / raw)
Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> It is a bug. Now, it is fixed. I also did another fix so that the
> messages will be encoded as koi8-r instead of iso-8859-5 if
> message-default-charset is koi8-r. Please verify both.
Thanks. Yes, I can send and forward messages with a Russian subject,
but what I get is subject line like the following one:
=?koi8-r?b?9MXT1CDQzyDS1dPTy8ku?=
instead of the actual text. Again, this looks as if it could be
misconfiguration on my part, in which case I'd appreciate a pointer on
how to fix this. Thanks.
(As I wrote earlier, my XEmacs does *not* have MULE, which may be
relevant.)
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 20:04 ` Dmitry Yaitskov
@ 2000-05-03 20:21 ` Shenghuo ZHU
2000-05-03 21:50 ` Dmitry Yaitskov
0 siblings, 1 reply; 12+ messages in thread
From: Shenghuo ZHU @ 2000-05-03 20:21 UTC (permalink / raw)
>>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
[...]
Dmitry> Thanks. Yes, I can send and forward messages with a Russian subject,
Dmitry> but what I get is subject line like the following one:
Dmitry> =?koi8-r?b?9MXT1CDQzyDS1dPTy8ku?=
Dmitry> instead of the actual text. Again, this looks as if it could
Dmitry> be misconfiguration on my part, in which case I'd appreciate a
Dmitry> pointer on how to fix this. Thanks.
By default, the subject and other fields are encoded according to
RFC2047. If you want to disable this feature, you need set
gnus-group-posting-charset-alist.
--
Shenghuo
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Cannot forward messages: no such coding system - koi8-r
2000-05-03 20:21 ` Shenghuo ZHU
@ 2000-05-03 21:50 ` Dmitry Yaitskov
0 siblings, 0 replies; 12+ messages in thread
From: Dmitry Yaitskov @ 2000-05-03 21:50 UTC (permalink / raw)
Shenghuo ZHU <zsh@cs.rochester.edu> wrote:
> >>>>> "Dmitry" == Dmitry Yaitskov <dimas@home.com> writes:
>
> [...]
>
> Dmitry> Thanks. Yes, I can send and forward messages with a Russian subject,
> Dmitry> but what I get is subject line like the following one:
>
> Dmitry> =?koi8-r?b?9MXT1CDQzyDS1dPTy8ku?=
>
> Dmitry> instead of the actual text. Again, this looks as if it could
> Dmitry> be misconfiguration on my part, in which case I'd appreciate a
> Dmitry> pointer on how to fix this. Thanks.
>
> By default, the subject and other fields are encoded according to
> RFC2047. If you want to disable this feature, you need set
> gnus-group-posting-charset-alist.
Many thanks. All works fine now.
--
Cheers,
-Dima.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2000-05-03 21:50 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-05-02 16:06 Cannot forward messages: no such coding system - koi8-r Dmitry Yaitskov
2000-05-02 16:41 ` Shenghuo ZHU
2000-05-02 19:13 ` Dmitry Yaitskov
2000-05-03 2:06 ` Shenghuo ZHU
2000-05-03 5:20 ` Dmitry Yaitskov
2000-05-03 13:34 ` Dmitry Yaitskov
2000-05-03 15:56 ` Shenghuo ZHU
2000-05-03 17:55 ` Dmitry Yaitskov
2000-05-03 18:49 ` Shenghuo ZHU
2000-05-03 20:04 ` Dmitry Yaitskov
2000-05-03 20:21 ` Shenghuo ZHU
2000-05-03 21:50 ` Dmitry Yaitskov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).