* Re: [PR PATCH] [Updated] jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
@ 2021-01-21 10:29 ` UsernameRandomlyGenerated
2021-01-22 4:05 ` ericonr
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: UsernameRandomlyGenerated @ 2021-01-21 10:29 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1650 bytes --]
There is an updated pull request by UsernameRandomlyGenerated against master on the void-packages repository
https://github.com/UsernameRandomlyGenerated/void-packages jitterentropy
https://github.com/void-linux/void-packages/pull/28073
jitterentropy: update to 3.0.1.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
@Piraty
A patch file from https://github.com/void-linux/void-packages/pull/28073.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-jitterentropy-28073.patch --]
[-- Type: text/x-diff, Size: 1173 bytes --]
From 7704184cb288acadbd18709532f470c53ec479a1 Mon Sep 17 00:00:00 2001
From: UsernameRandomlyGenerated <coredavid@tutanota.com>
Date: Thu, 21 Jan 2021 11:14:09 +0100
Subject: [PATCH] jitterentropy: update to 3.0.1.
---
srcpkgs/jitterentropy/template | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/jitterentropy/template b/srcpkgs/jitterentropy/template
index 746a015f9f5..d0a78ef317e 100644
--- a/srcpkgs/jitterentropy/template
+++ b/srcpkgs/jitterentropy/template
@@ -1,6 +1,6 @@
# Template file for 'jitterentropy'
pkgname=jitterentropy
-version=3.0.0
+version=3.0.1
revision=1
wrksrc="${pkgname}-library-${version}"
build_style=gnu-makefile
@@ -9,7 +9,11 @@ maintainer="Piraty <piraty1@inbox.ru>"
license="BSD-3-Clause"
homepage="https://www.chronox.de/jent.html"
distfiles="https://github.com/smuellerDD/jitterentropy-library/archive/v${version}.tar.gz"
-checksum=e4e0e6a2ae19c8b927bb7d249c05610297c2ca8b6d4eb84ff348e8412f71d825
+checksum=015a443ebfaab7bc302caa24dcc124aefe1818046893f49591d2465bd3f58e16
+
+post_install() {
+ vlicense COPYING.bsd
+}
jitterentropy-devel_package() {
short_desc+=" - development files"
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
2021-01-21 10:29 ` [PR PATCH] [Updated] " UsernameRandomlyGenerated
@ 2021-01-22 4:05 ` ericonr
2021-01-22 4:05 ` ericonr
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-22 4:05 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 317 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-765106591
Comment:
Superseded by https://github.com/void-linux/void-packages/commit/be36e2cdaff462e617e95b16626efe8aaab7b540
Can be repurposed to add the vlicense line to the template, though.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
2021-01-21 10:29 ` [PR PATCH] [Updated] " UsernameRandomlyGenerated
2021-01-22 4:05 ` ericonr
@ 2021-01-22 4:05 ` ericonr
2021-01-22 9:04 ` Piraty
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-22 4:05 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 149 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-765106638
Comment:
@Piraty
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (2 preceding siblings ...)
2021-01-22 4:05 ` ericonr
@ 2021-01-22 9:04 ` Piraty
2021-01-24 12:37 ` [PR PATCH] [Updated] " UsernameRandomlyGenerated
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Piraty @ 2021-01-22 9:04 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 171 bytes --]
New comment by Piraty on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-765251068
Comment:
oh i didn't see this PR, my bad
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PR PATCH] [Updated] jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (3 preceding siblings ...)
2021-01-22 9:04 ` Piraty
@ 2021-01-24 12:37 ` UsernameRandomlyGenerated
2021-01-24 12:40 ` UsernameRandomlyGenerated
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: UsernameRandomlyGenerated @ 2021-01-24 12:37 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1650 bytes --]
There is an updated pull request by UsernameRandomlyGenerated against master on the void-packages repository
https://github.com/UsernameRandomlyGenerated/void-packages jitterentropy
https://github.com/void-linux/void-packages/pull/28073
jitterentropy: update to 3.0.1.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
@Piraty
A patch file from https://github.com/void-linux/void-packages/pull/28073.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-jitterentropy-28073.patch --]
[-- Type: text/x-diff, Size: 1253 bytes --]
From e34c6dba714ce99972a20b738025c98fd14e9518 Mon Sep 17 00:00:00 2001
From: UsernameRandomlyGenerated <coredavid@tutanota.com>
Date: Thu, 21 Jan 2021 11:14:09 +0100
Subject: [PATCH] jitterentropy: add license
---
srcpkgs/jitterentropy/template | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/jitterentropy/template b/srcpkgs/jitterentropy/template
index 746a015f9f5..ee319d1c1bf 100644
--- a/srcpkgs/jitterentropy/template
+++ b/srcpkgs/jitterentropy/template
@@ -1,15 +1,19 @@
# Template file for 'jitterentropy'
pkgname=jitterentropy
-version=3.0.0
+version=3.0.1
revision=1
wrksrc="${pkgname}-library-${version}"
build_style=gnu-makefile
short_desc="Hardware RNG based on CPU timing jitter"
maintainer="Piraty <piraty1@inbox.ru>"
-license="BSD-3-Clause"
+license="BSD-3-Clause, GPL-2.0-or-later"
homepage="https://www.chronox.de/jent.html"
distfiles="https://github.com/smuellerDD/jitterentropy-library/archive/v${version}.tar.gz"
-checksum=e4e0e6a2ae19c8b927bb7d249c05610297c2ca8b6d4eb84ff348e8412f71d825
+checksum=015a443ebfaab7bc302caa24dcc124aefe1818046893f49591d2465bd3f58e16
+
+post_install() {
+ vlicense COPYING.bsd
+}
jitterentropy-devel_package() {
short_desc+=" - development files"
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (4 preceding siblings ...)
2021-01-24 12:37 ` [PR PATCH] [Updated] " UsernameRandomlyGenerated
@ 2021-01-24 12:40 ` UsernameRandomlyGenerated
2021-01-24 16:09 ` Piraty
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: UsernameRandomlyGenerated @ 2021-01-24 12:40 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 219 bytes --]
New comment by UsernameRandomlyGenerated on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-766341566
Comment:
@Piraty I've made some changes to license as it has gpl2 too
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (5 preceding siblings ...)
2021-01-24 12:40 ` UsernameRandomlyGenerated
@ 2021-01-24 16:09 ` Piraty
2021-01-24 16:10 ` Piraty
2021-01-24 16:13 ` [PR PATCH] [Closed]: " Piraty
8 siblings, 0 replies; 10+ messages in thread
From: Piraty @ 2021-01-24 16:09 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2165 bytes --]
New comment by Piraty on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-766374451
Comment:
it is bsd OR gpl2, and since Void doesn't comply to SPDX syntax yet (https://github.com/void-linux/void-packages/issues/11240), we keep it to BSD
> Copyright (C) 2017 - 2021, Stephan Mueller <smueller@chronox.de>
>
> Redistribution and use in source and binary forms, with or without
> modification, are permitted provided that the following conditions
> are met:
> 1. Redistributions of source code must retain the above copyright
> notice, and the entire permission notice in its entirety,
> including the disclaimer of warranties.
> 2. Redistributions in binary form must reproduce the above copyright
> notice, this list of conditions and the following disclaimer in the
> documentation and/or other materials provided with the distribution.
> 3. The name of the author may not be used to endorse or promote
> products derived from this software without specific prior
> written permission.
>
> ALTERNATIVELY, this product may be distributed under the terms of
> the GNU General Public License, in which case the provisions of the GPL2
> are required INSTEAD OF the above restrictions. (This clause is
> necessary due to a potential bad interaction between the GPL and
> the restrictions contained in a BSD-style copyright.)
>
> THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF
> WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
> LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
> OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
> LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (6 preceding siblings ...)
2021-01-24 16:09 ` Piraty
@ 2021-01-24 16:10 ` Piraty
2021-01-24 16:13 ` [PR PATCH] [Closed]: " Piraty
8 siblings, 0 replies; 10+ messages in thread
From: Piraty @ 2021-01-24 16:10 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2176 bytes --]
New comment by Piraty on void-packages repository
https://github.com/void-linux/void-packages/pull/28073#issuecomment-766374451
Comment:
it is bsd OR gpl2, and since Void doesn't comply to SPDX syntax yet (https://github.com/void-linux/void-packages/issues/11240), we keep it to BSD
COPYING
> Copyright (C) 2017 - 2021, Stephan Mueller <smueller@chronox.de>
>
> Redistribution and use in source and binary forms, with or without
> modification, are permitted provided that the following conditions
> are met:
> 1. Redistributions of source code must retain the above copyright
> notice, and the entire permission notice in its entirety,
> including the disclaimer of warranties.
> 2. Redistributions in binary form must reproduce the above copyright
> notice, this list of conditions and the following disclaimer in the
> documentation and/or other materials provided with the distribution.
> 3. The name of the author may not be used to endorse or promote
> products derived from this software without specific prior
> written permission.
>
> ALTERNATIVELY, this product may be distributed under the terms of
> the GNU General Public License, in which case the provisions of the GPL2
> are required INSTEAD OF the above restrictions. (This clause is
> necessary due to a potential bad interaction between the GPL and
> the restrictions contained in a BSD-style copyright.)
>
> THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
> WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
> OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF
> WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
> LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
> OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
> LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE OF THIS SOFTWARE, EVEN IF NOT ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PR PATCH] [Closed]: jitterentropy: update to 3.0.1.
2021-01-21 10:15 [PR PATCH] jitterentropy: update to 3.0.1 UsernameRandomlyGenerated
` (7 preceding siblings ...)
2021-01-24 16:10 ` Piraty
@ 2021-01-24 16:13 ` Piraty
8 siblings, 0 replies; 10+ messages in thread
From: Piraty @ 2021-01-24 16:13 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1452 bytes --]
There's a closed pull request on the void-packages repository
jitterentropy: update to 3.0.1.
https://github.com/void-linux/void-packages/pull/28073
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
@Piraty
^ permalink raw reply [flat|nested] 10+ messages in thread