[PR PATCH] hub: add subpackage with vim config files

[PR PATCH] hub: add subpackage with vim config files

[Gottox]

[-- Attachment #1: Type: text/plain, Size: 1574 bytes --]

There is a new pull request by Gottox against master on the void-packages repository

https://github.com/Gottox/void-packages hub-vim
https://github.com/void-linux/void-packages/pull/28386

hub: add subpackage with vim config files
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

A patch file from https://github.com/void-linux/void-packages/pull/28386.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hub-vim-28386.patch --]
[-- Type: text/x-diff, Size: 1097 bytes --]

From 5b1175b002c535ef38cb6744d96d68ce33582261 Mon Sep 17 00:00:00 2001
From: Enno Boland <gottox@voidlinux.org>
Date: Mon, 1 Feb 2021 15:26:09 +0100
Subject: [PATCH] hub: add subpackage with vim config files

---
 srcpkgs/hub/template | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/srcpkgs/hub/template b/srcpkgs/hub/template
index 9865d359fd2..60dd753609c 100644
--- a/srcpkgs/hub/template
+++ b/srcpkgs/hub/template
@@ -47,4 +47,19 @@ post_install() {
 	vinstall etc/hub.zsh_completion 644 usr/share/zsh/site-functions _hub
 	vinstall etc/hub.bash_completion.sh 644 usr/share/bash-completion/completions hub
 	vinstall etc/hub.fish_completion 644 usr/share/fish/vendor_completions.d hub.fish
+	for i in share/vim/vimfiles/*/pullrequest.vim; do
+		dir="${i%/*}"
+		vinstall "$i" 644 "usr/$dir"
+		vmkdir "usr/${dir/vim/nvim}"
+		ln -sr "$DESTDIR/usr/${i}" "$DESTDIR/usr/${i/vim/nvim}"
+	done
+}
+
+hub-vim_package() {
+	depends="${sourcepkg}>=${version}_${revision}"
+	short_desc+=" - vim integration"
+	pkg_install() {
+		vmove usr/share/vim
+		vmove usr/share/nvim
+	}
 }

Re: [PR PATCH] [Updated] hub: add subpackage with vim config files

[Gottox]

[-- Attachment #1: Type: text/plain, Size: 1579 bytes --]

There is an updated pull request by Gottox against master on the void-packages repository

https://github.com/Gottox/void-packages hub-vim
https://github.com/void-linux/void-packages/pull/28386

hub: add subpackage with vim config files
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

A patch file from https://github.com/void-linux/void-packages/pull/28386.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hub-vim-28386.patch --]
[-- Type: text/x-diff, Size: 891 bytes --]

From d6ef5442346c109207cd2d73cdac38c658076c55 Mon Sep 17 00:00:00 2001
From: Enno Boland <gottox@voidlinux.org>
Date: Mon, 1 Feb 2021 15:26:09 +0100
Subject: [PATCH] hub: add vim config files

---
 srcpkgs/hub/template | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/srcpkgs/hub/template b/srcpkgs/hub/template
index 9865d359fd2..6457547a807 100644
--- a/srcpkgs/hub/template
+++ b/srcpkgs/hub/template
@@ -47,4 +47,10 @@ post_install() {
 	vinstall etc/hub.zsh_completion 644 usr/share/zsh/site-functions _hub
 	vinstall etc/hub.bash_completion.sh 644 usr/share/bash-completion/completions hub
 	vinstall etc/hub.fish_completion 644 usr/share/fish/vendor_completions.d hub.fish
+	for i in share/vim/vimfiles/*/pullrequest.vim; do
+		dir="${i%/*}"
+		vinstall "$i" 644 "usr/$dir"
+		vmkdir "usr/${dir/vim/nvim}"
+		ln -sr "$DESTDIR/usr/${i}" "$DESTDIR/usr/${i/vim/nvim}"
+	done
 }

Re: [PR PATCH] [Updated] hub: add subpackage with vim config files

[Gottox]

[-- Attachment #1: Type: text/plain, Size: 1579 bytes --]

There is an updated pull request by Gottox against master on the void-packages repository

https://github.com/Gottox/void-packages hub-vim
https://github.com/void-linux/void-packages/pull/28386

hub: add subpackage with vim config files
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->

A patch file from https://github.com/void-linux/void-packages/pull/28386.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hub-vim-28386.patch --]
[-- Type: text/x-diff, Size: 1087 bytes --]

From 94463fe37b3c7ebbb9c9fd5756c274a36eb49170 Mon Sep 17 00:00:00 2001
From: Enno Boland <gottox@voidlinux.org>
Date: Mon, 1 Feb 2021 15:26:09 +0100
Subject: [PATCH] hub: add vim config files

---
 srcpkgs/hub/template | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/srcpkgs/hub/template b/srcpkgs/hub/template
index 9865d359fd2..6d27860df0e 100644
--- a/srcpkgs/hub/template
+++ b/srcpkgs/hub/template
@@ -1,7 +1,7 @@
 # Template file for 'hub'
 pkgname=hub
 version=2.14.2
-revision=1
+revision=2
 build_style=go
 go_import_path=github.com/github/hub
 hostmakedepends="git groff"
@@ -47,4 +47,10 @@ post_install() {
 	vinstall etc/hub.zsh_completion 644 usr/share/zsh/site-functions _hub
 	vinstall etc/hub.bash_completion.sh 644 usr/share/bash-completion/completions hub
 	vinstall etc/hub.fish_completion 644 usr/share/fish/vendor_completions.d hub.fish
+	for i in share/vim/vimfiles/*/pullrequest.vim; do
+		dir="${i%/*}"
+		vinstall "$i" 644 "usr/$dir"
+		vmkdir "usr/${dir/vim/nvim}"
+		ln -sr "$DESTDIR/usr/${i}" "$DESTDIR/usr/${i/vim/nvim}"
+	done
 }

Re: [PR PATCH] [Merged]: hub: add vim config files

[Gottox]

[-- Attachment #1: Type: text/plain, Size: 1409 bytes --]

There's a merged pull request on the void-packages repository

hub: add vim config files
https://github.com/void-linux/void-packages/pull/28386

Description:
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->