* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
@ 2021-03-16 1:50 ` sburris0
2021-03-16 1:56 ` sburris0
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-03-16 1:50 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 1851 bytes --]
From 55900a9caa6bdc57c31f2942767a75999f79e1a9 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH 1/2] signal-backup-decode: update to 0.2.1
---
srcpkgs/signal-backup-decode/template | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..4b373659c47b 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=0
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -10,4 +10,4 @@ maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
From 366d15fd870bd3b300cd8897a1bd437da1490783 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:50:00 -0700
Subject: [PATCH 2/2] Update template
---
srcpkgs/signal-backup-decode/template | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 4b373659c47b..a8a3b1bd9b99 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
version=0.2.1
-revision=0
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
2021-03-16 1:50 ` [PR PATCH] [Updated] " sburris0
@ 2021-03-16 1:56 ` sburris0
2021-03-16 1:58 ` sburris0
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-03-16 1:56 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 2976 bytes --]
From 55900a9caa6bdc57c31f2942767a75999f79e1a9 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH 1/3] signal-backup-decode: update to 0.2.1
---
srcpkgs/signal-backup-decode/template | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..4b373659c47b 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=0
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -10,4 +10,4 @@ maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
From 366d15fd870bd3b300cd8897a1bd437da1490783 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:50:00 -0700
Subject: [PATCH 2/3] Update template
---
srcpkgs/signal-backup-decode/template | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 4b373659c47b..a8a3b1bd9b99 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
version=0.2.1
-revision=0
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
From efbb9c83a0afa2ec5bbc48dc4439ef79e1eeb2ed Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH 3/3] signal-backup-decode: update to 0.2.1
---
srcpkgs/signal-backup-decode/template | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..a8a3b1bd9b99 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -10,4 +10,4 @@ maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
2021-03-16 1:50 ` [PR PATCH] [Updated] " sburris0
2021-03-16 1:56 ` sburris0
@ 2021-03-16 1:58 ` sburris0
2021-03-16 2:01 ` sburris0
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-03-16 1:58 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 1120 bytes --]
From 05c5f67d80b003bff694d9d2f09bf7f586fe5434 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH] signal-backup-decode: update to 0.2.1
---
srcpkgs/signal-backup-decode/template | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..a8a3b1bd9b99 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -10,4 +10,4 @@ maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (2 preceding siblings ...)
2021-03-16 1:58 ` sburris0
@ 2021-03-16 2:01 ` sburris0
2021-03-16 20:07 ` tibequadorian
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-03-16 2:01 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 1216 bytes --]
From 5c59c48e08e1ceea2a4421478079bdcbb7eb2470 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH] signal-backup-decode: update to 0.2.1
---
srcpkgs/signal-backup-decode/template | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..911891679430 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -9,5 +9,5 @@ short_desc="Decode Signal Android Backups"
maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
-distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+distfiles="${homepage}/archive/v${version}.tar.gz"
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (3 preceding siblings ...)
2021-03-16 2:01 ` sburris0
@ 2021-03-16 20:07 ` tibequadorian
2021-04-10 16:53 ` [PR PATCH] [Updated] " sburris0
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tibequadorian @ 2021-03-16 20:07 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 265 bytes --]
New comment by tibequadorian on void-packages repository
https://github.com/void-linux/void-packages/pull/29502#issuecomment-800567659
Comment:
A patch [exists](https://github.com/pajowu/signal-backup-decode/commit/de0c58c9c0a9453dd62e7e9f91c8d2a6a0395eb5.patch)
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (4 preceding siblings ...)
2021-03-16 20:07 ` tibequadorian
@ 2021-04-10 16:53 ` sburris0
2021-04-10 16:57 ` sburris0
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-04-10 16:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 2066 bytes --]
From 9484547406623c2ca74bb03263805c478990fb81 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH] signal-backup-decode: update to 0.2.1
---
.../patches/signal-backup-decode-0.2.1-aes_ctr.patch | 12 ++++++++++++
srcpkgs/signal-backup-decode/template | 8 ++++----
2 files changed, 16 insertions(+), 4 deletions(-)
create mode 100644 srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
diff --git a/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch b/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
new file mode 100644
index 000000000000..ff0f96858455
--- /dev/null
+++ b/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
@@ -0,0 +1,12 @@
+diff --git a/src/decrypter.rs b/src/decrypter.rs
+index b660aac..0247fd0 100644
+--- a/src/decrypter.rs
++++ b/src/decrypter.rs
+@@ -125,7 +125,6 @@ impl std::fmt::Display for DecryptError {
+ #[cfg(test)]
+ mod tests {
+ use super::*;
+- use aes_ctr::stream_cipher::NewStreamCipher;
+
+ #[test]
+ fn increase_iv() {
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..911891679430 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -9,5 +9,5 @@ short_desc="Decode Signal Android Backups"
maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
-distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+distfiles="${homepage}/archive/v${version}.tar.gz"
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (5 preceding siblings ...)
2021-04-10 16:53 ` [PR PATCH] [Updated] " sburris0
@ 2021-04-10 16:57 ` sburris0
2021-04-10 22:31 ` tibequadorian
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-04-10 16:57 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 2964 bytes --]
From 1961147b427218fb3922330739035b9bd8a744df Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH] signal-backup-decode: update to 0.2.1
---
.../signal-backup-decode-0.2.1-aes_ctr.patch | 39 +++++++++++++++++++
srcpkgs/signal-backup-decode/template | 8 ++--
2 files changed, 43 insertions(+), 4 deletions(-)
create mode 100644 srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
diff --git a/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch b/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
new file mode 100644
index 000000000000..bf8084a2f65c
--- /dev/null
+++ b/srcpkgs/signal-backup-decode/patches/signal-backup-decode-0.2.1-aes_ctr.patch
@@ -0,0 +1,39 @@
+From de0c58c9c0a9453dd62e7e9f91c8d2a6a0395eb5 Mon Sep 17 00:00:00 2001
+From: xduugu <xduugu@gmx.com>
+Date: Sat, 24 Oct 2020 21:45:07 +0000
+Subject: [PATCH] Fix tests module (#34)
+
+Compiling the tests module fails because of a missing import:
+
+error[E0433]: failed to resolve: use of undeclared type or module `aes_ctr`
+ --> src/decrypter.rs:128:6
+ |
+128 | use aes_ctr::stream_cipher::NewStreamCipher;
+ | ^^^^^^^ use of undeclared type or module `aes_ctr`
+
+It turned out, however, that NewStreamCipher is never used. Therefore,
+it is sufficient to remove the problematic import line.
+
+warning: unused import: `aes_ctr::stream_cipher::NewStreamCipher`
+ --> src/decrypter.rs:128:6
+ |
+128 | use aes_ctr::stream_cipher::NewStreamCipher;
+ | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ |
+---
+ src/decrypter.rs | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/src/decrypter.rs b/src/decrypter.rs
+index b660aac..0247fd0 100644
+--- a/src/decrypter.rs
++++ b/src/decrypter.rs
+@@ -125,7 +125,6 @@ impl std::fmt::Display for DecryptError {
+ #[cfg(test)]
+ mod tests {
+ use super::*;
+- use aes_ctr::stream_cipher::NewStreamCipher;
+
+ #[test]
+ fn increase_iv() {
+
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..911891679430 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.1
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -9,5 +9,5 @@ short_desc="Decode Signal Android Backups"
maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
-distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+distfiles="${homepage}/archive/v${version}.tar.gz"
+checksum=99d499a0b12ae73004ef1a217a231700061898c577f392b5ea733d4902ddb178
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (6 preceding siblings ...)
2021-04-10 16:57 ` sburris0
@ 2021-04-10 22:31 ` tibequadorian
2021-04-11 1:50 ` [PR PATCH] [Updated] " sburris0
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: tibequadorian @ 2021-04-10 22:31 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 235 bytes --]
New comment by tibequadorian on void-packages repository
https://github.com/void-linux/void-packages/pull/29502#issuecomment-817210861
Comment:
There's a new release https://github.com/pajowu/signal-backup-decode/releases/tag/v0.2.3
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Updated] signal-backup-decode: update to 0.2.1
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (7 preceding siblings ...)
2021-04-10 22:31 ` tibequadorian
@ 2021-04-11 1:50 ` sburris0
2021-04-11 1:59 ` signal-backup-decode: update to 0.2.3 sburris0
2021-04-11 3:47 ` [PR PATCH] [Closed]: " ericonr
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-04-11 1:50 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1606 bytes --]
There is an updated pull request by sburris0 against master on the void-packages repository
https://github.com/sburris0/void-packages patch-1
https://github.com/void-linux/void-packages/pull/29502
signal-backup-decode: update to 0.2.1
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29502.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-patch-1-29502.patch --]
[-- Type: text/x-diff, Size: 1216 bytes --]
From 77cafbdaf4142a615ae1fac65bbb3afac4132ea9 Mon Sep 17 00:00:00 2001
From: Spencer Burris <sburris@posteo.net>
Date: Mon, 15 Mar 2021 18:47:05 -0700
Subject: [PATCH] signal-backup-decode: update to 0.2.3
---
srcpkgs/signal-backup-decode/template | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/srcpkgs/signal-backup-decode/template b/srcpkgs/signal-backup-decode/template
index 119546b61ea7..747736adeb5e 100644
--- a/srcpkgs/signal-backup-decode/template
+++ b/srcpkgs/signal-backup-decode/template
@@ -1,7 +1,7 @@
# Template file for 'signal-backup-decode'
pkgname=signal-backup-decode
-version=0.2.0
-revision=2
+version=0.2.3
+revision=1
build_style=cargo
hostmakedepends="pkg-config"
makedepends="openssl-devel sqlite-devel"
@@ -9,5 +9,5 @@ short_desc="Decode Signal Android Backups"
maintainer="Spencer Burris <sburris@posteo.net>"
license="GPL-3.0-or-later"
homepage="https://github.com/pajowu/signal-backup-decode"
-distfiles="${homepage}/archive/${version}.tar.gz"
-checksum=9a454bb894963e7f6301bdcd3db2c7978fb0cfb7e6fce3f4f553ccad7f955fe9
+distfiles="${homepage}/archive/v${version}.tar.gz"
+checksum=e7727b6628004cd027e374bcd8a004d8c3e68b3ba03e82ce2c9e04ee58623ed2
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: signal-backup-decode: update to 0.2.3
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (8 preceding siblings ...)
2021-04-11 1:50 ` [PR PATCH] [Updated] " sburris0
@ 2021-04-11 1:59 ` sburris0
2021-04-11 3:47 ` [PR PATCH] [Closed]: " ericonr
10 siblings, 0 replies; 12+ messages in thread
From: sburris0 @ 2021-04-11 1:59 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 222 bytes --]
New comment by sburris0 on void-packages repository
https://github.com/void-linux/void-packages/pull/29502#issuecomment-817234166
Comment:
Ah, didn't see it when I checked earlier. Everything should be good now, thanks.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PR PATCH] [Closed]: signal-backup-decode: update to 0.2.3
2021-03-16 1:48 [PR PATCH] signal-backup-decode: update to 0.2.1 sburris0
` (9 preceding siblings ...)
2021-04-11 1:59 ` signal-backup-decode: update to 0.2.3 sburris0
@ 2021-04-11 3:47 ` ericonr
10 siblings, 0 replies; 12+ messages in thread
From: ericonr @ 2021-04-11 3:47 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1448 bytes --]
There's a closed pull request on the void-packages repository
signal-backup-decode: update to 0.2.3
https://github.com/void-linux/void-packages/pull/29502
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 12+ messages in thread