Github messages for voidlinux
 help / color / mirror / Atom feed
* [PR PATCH] pipewire: update to 0.3.25
@ 2021-04-06 15:52 st3r4g
  2021-04-06 15:57 ` [PR PATCH] [Updated] " st3r4g
                   ` (15 more replies)
  0 siblings, 16 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 15:52 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1891 bytes --]

There is a new pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 deps, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 5846 bytes --]

From f4ad5391f799d8b7580a9a57b77dfcf188e2947c Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 deps, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 ---
 srcpkgs/pipewire/files/README.voidlinux       |  2 ++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----------
 srcpkgs/pipewire/patches/with-bluetooth.patch | 19 ++++++++++++++++++
 srcpkgs/pipewire/template                     | 20 +++++++++++--------
 5 files changed, 33 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch
 create mode 100644 srcpkgs/pipewire/patches/with-bluetooth.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/patches/with-bluetooth.patch b/srcpkgs/pipewire/patches/with-bluetooth.patch
new file mode 100644
index 000000000000..3f6ef0c02fd2
--- /dev/null
+++ b/srcpkgs/pipewire/patches/with-bluetooth.patch
@@ -0,0 +1,19 @@
+Activate bluetooth support only when the bluetooth plugin is installed.
+--- src/daemon/media-session.d/media-session.conf.orig	2021-04-06 17:05:05.935876278 +0200
++++ src/daemon/media-session.d/media-session.conf	2021-04-06 17:06:16.599878154 +0200
+@@ -94,12 +94,14 @@
+     with-alsa = [
+         with-audio
+     ]
++    with-bluetooth = [
++        bluez5
++    ]
+     with-jack = [
+         with-audio
+     ]
+     with-pulseaudio = [
+         with-audio
+-        bluez5
+         restore-stream
+         streams-follow-default
+     ]
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..2dc236638645 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -34,6 +36,7 @@ fi
 post_install() {
 	vlicense LICENSE
 	vdoc "${FILESDIR}/README.voidlinux"
+	touch "${DESTDIR}/etc/pipewire/media-session.d/with-bluetooth"
 }
 
 libpipewire_package() {
@@ -81,6 +84,7 @@ libspa-bluetooth_package() {
 	short_desc+=" - bluetooth plugins"
 	pkg_install() {
 		vmove usr/lib/spa-0.2/bluez5
+		vmove etc/pipewire/media-session.d/with-bluetooth
 	}
 }
 
@@ -154,6 +158,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Updated] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
@ 2021-04-06 15:57 ` st3r4g
  2021-04-06 16:03 ` st3r4g
                   ` (14 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 15:57 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1910 bytes --]

There is an updated pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 deps, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 5845 bytes --]

From 823cee89a063a6650002e5799aca38130338e0e5 Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 ---
 srcpkgs/pipewire/files/README.voidlinux       |  2 ++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----------
 srcpkgs/pipewire/patches/with-bluetooth.patch | 19 ++++++++++++++++++
 srcpkgs/pipewire/template                     | 20 +++++++++++--------
 5 files changed, 33 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch
 create mode 100644 srcpkgs/pipewire/patches/with-bluetooth.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/patches/with-bluetooth.patch b/srcpkgs/pipewire/patches/with-bluetooth.patch
new file mode 100644
index 000000000000..3f6ef0c02fd2
--- /dev/null
+++ b/srcpkgs/pipewire/patches/with-bluetooth.patch
@@ -0,0 +1,19 @@
+Activate bluetooth support only when the bluetooth plugin is installed.
+--- src/daemon/media-session.d/media-session.conf.orig	2021-04-06 17:05:05.935876278 +0200
++++ src/daemon/media-session.d/media-session.conf	2021-04-06 17:06:16.599878154 +0200
+@@ -94,12 +94,14 @@
+     with-alsa = [
+         with-audio
+     ]
++    with-bluetooth = [
++        bluez5
++    ]
+     with-jack = [
+         with-audio
+     ]
+     with-pulseaudio = [
+         with-audio
+-        bluez5
+         restore-stream
+         streams-follow-default
+     ]
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..2dc236638645 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -34,6 +36,7 @@ fi
 post_install() {
 	vlicense LICENSE
 	vdoc "${FILESDIR}/README.voidlinux"
+	touch "${DESTDIR}/etc/pipewire/media-session.d/with-bluetooth"
 }
 
 libpipewire_package() {
@@ -81,6 +84,7 @@ libspa-bluetooth_package() {
 	short_desc+=" - bluetooth plugins"
 	pkg_install() {
 		vmove usr/lib/spa-0.2/bluez5
+		vmove etc/pipewire/media-session.d/with-bluetooth
 	}
 }
 
@@ -154,6 +158,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
  2021-04-06 15:57 ` [PR PATCH] [Updated] " st3r4g
@ 2021-04-06 16:03 ` st3r4g
  2021-04-06 16:07 ` st3r4g
                   ` (13 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:03 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 177 bytes --]

New comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#issuecomment-814239982

Comment:
hmm wait a sec, `pw-cat` disappeared?

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
  2021-04-06 15:57 ` [PR PATCH] [Updated] " st3r4g
  2021-04-06 16:03 ` st3r4g
@ 2021-04-06 16:07 ` st3r4g
  2021-04-06 16:14 ` st3r4g
                   ` (12 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:07 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 220 bytes --]

New comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#issuecomment-814239982

Comment:
hmm wait a sec, `pw-cat` disappeared?
Ah, there is a meson option for it now...

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (2 preceding siblings ...)
  2021-04-06 16:07 ` st3r4g
@ 2021-04-06 16:14 ` st3r4g
  2021-04-06 16:18 ` [PR PATCH] [Updated] " st3r4g
                   ` (11 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:14 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 216 bytes --]

New comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#issuecomment-814239982

Comment:
hmm wait a sec, `pw-cat` disappeared?
Ok I'm now missing `libsndfile-devel`

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Updated] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (3 preceding siblings ...)
  2021-04-06 16:14 ` st3r4g
@ 2021-04-06 16:18 ` st3r4g
  2021-04-06 16:18 ` st3r4g
                   ` (10 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:18 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1909 bytes --]

There is an updated pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 5862 bytes --]

From eef2bc71f1866e88c7c7d2822fe216d74088936f Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 ---
 srcpkgs/pipewire/files/README.voidlinux       |  2 ++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----------
 srcpkgs/pipewire/patches/with-bluetooth.patch | 19 ++++++++++++++++++
 srcpkgs/pipewire/template                     | 20 +++++++++++--------
 5 files changed, 33 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch
 create mode 100644 srcpkgs/pipewire/patches/with-bluetooth.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/patches/with-bluetooth.patch b/srcpkgs/pipewire/patches/with-bluetooth.patch
new file mode 100644
index 000000000000..3f6ef0c02fd2
--- /dev/null
+++ b/srcpkgs/pipewire/patches/with-bluetooth.patch
@@ -0,0 +1,19 @@
+Activate bluetooth support only when the bluetooth plugin is installed.
+--- src/daemon/media-session.d/media-session.conf.orig	2021-04-06 17:05:05.935876278 +0200
++++ src/daemon/media-session.d/media-session.conf	2021-04-06 17:06:16.599878154 +0200
+@@ -94,12 +94,14 @@
+     with-alsa = [
+         with-audio
+     ]
++    with-bluetooth = [
++        bluez5
++    ]
+     with-jack = [
+         with-audio
+     ]
+     with-pulseaudio = [
+         with-audio
+-        bluez5
+         restore-stream
+         streams-follow-default
+     ]
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..0b06592e3c6b 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ libsndfile-devel Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -34,6 +36,7 @@ fi
 post_install() {
 	vlicense LICENSE
 	vdoc "${FILESDIR}/README.voidlinux"
+	touch "${DESTDIR}/etc/pipewire/media-session.d/with-bluetooth"
 }
 
 libpipewire_package() {
@@ -81,6 +84,7 @@ libspa-bluetooth_package() {
 	short_desc+=" - bluetooth plugins"
 	pkg_install() {
 		vmove usr/lib/spa-0.2/bluez5
+		vmove etc/pipewire/media-session.d/with-bluetooth
 	}
 }
 
@@ -154,6 +158,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (4 preceding siblings ...)
  2021-04-06 16:18 ` [PR PATCH] [Updated] " st3r4g
@ 2021-04-06 16:18 ` st3r4g
  2021-04-06 16:50 ` st3r4g
                   ` (9 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:18 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 220 bytes --]

New comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#issuecomment-814239982

Comment:
~~hmm wait a sec, `pw-cat` disappeared?
Ok I'm now missing `libsndfile-devel`~~

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (5 preceding siblings ...)
  2021-04-06 16:18 ` st3r4g
@ 2021-04-06 16:50 ` st3r4g
  2021-04-06 17:19 ` [PR REVIEW] " ericonr
                   ` (8 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 16:50 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 218 bytes --]

New comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#issuecomment-814239982

Comment:
~~hmm wait a sec, `pw-cat` disappeared?~~
Ok I was missing `libsndfile-devel`

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR REVIEW] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (6 preceding siblings ...)
  2021-04-06 16:50 ` st3r4g
@ 2021-04-06 17:19 ` ericonr
  2021-04-06 17:47 ` st3r4g
                   ` (7 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-04-06 17:19 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 212 bytes --]

New review comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#discussion_r608039168

Comment:
Can this be upstreamed? Sounds like a nice improvement overall...

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR REVIEW] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (7 preceding siblings ...)
  2021-04-06 17:19 ` [PR REVIEW] " ericonr
@ 2021-04-06 17:47 ` st3r4g
  2021-04-07 18:10 ` ericonr
                   ` (6 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-06 17:47 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 165 bytes --]

New review comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#discussion_r608058973

Comment:
ok I can propose it

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR REVIEW] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (8 preceding siblings ...)
  2021-04-06 17:47 ` st3r4g
@ 2021-04-07 18:10 ` ericonr
  2021-04-08  8:46 ` [PR PATCH] [Updated] " st3r4g
                   ` (5 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-04-07 18:10 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 248 bytes --]

New review comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#discussion_r608881905

Comment:
Nit: `touch $PKGDESTDIR/etc/...` here and avoid having to deal with the file in two different places?

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Updated] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (9 preceding siblings ...)
  2021-04-07 18:10 ` ericonr
@ 2021-04-08  8:46 ` st3r4g
  2021-04-08  8:57 ` st3r4g
                   ` (4 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-08  8:46 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1909 bytes --]

There is an updated pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 5862 bytes --]

From eef2bc71f1866e88c7c7d2822fe216d74088936f Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 ---
 srcpkgs/pipewire/files/README.voidlinux       |  2 ++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----------
 srcpkgs/pipewire/patches/with-bluetooth.patch | 19 ++++++++++++++++++
 srcpkgs/pipewire/template                     | 20 +++++++++++--------
 5 files changed, 33 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch
 create mode 100644 srcpkgs/pipewire/patches/with-bluetooth.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/patches/with-bluetooth.patch b/srcpkgs/pipewire/patches/with-bluetooth.patch
new file mode 100644
index 000000000000..3f6ef0c02fd2
--- /dev/null
+++ b/srcpkgs/pipewire/patches/with-bluetooth.patch
@@ -0,0 +1,19 @@
+Activate bluetooth support only when the bluetooth plugin is installed.
+--- src/daemon/media-session.d/media-session.conf.orig	2021-04-06 17:05:05.935876278 +0200
++++ src/daemon/media-session.d/media-session.conf	2021-04-06 17:06:16.599878154 +0200
+@@ -94,12 +94,14 @@
+     with-alsa = [
+         with-audio
+     ]
++    with-bluetooth = [
++        bluez5
++    ]
+     with-jack = [
+         with-audio
+     ]
+     with-pulseaudio = [
+         with-audio
+-        bluez5
+         restore-stream
+         streams-follow-default
+     ]
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..0b06592e3c6b 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ libsndfile-devel Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -34,6 +36,7 @@ fi
 post_install() {
 	vlicense LICENSE
 	vdoc "${FILESDIR}/README.voidlinux"
+	touch "${DESTDIR}/etc/pipewire/media-session.d/with-bluetooth"
 }
 
 libpipewire_package() {
@@ -81,6 +84,7 @@ libspa-bluetooth_package() {
 	short_desc+=" - bluetooth plugins"
 	pkg_install() {
 		vmove usr/lib/spa-0.2/bluez5
+		vmove etc/pipewire/media-session.d/with-bluetooth
 	}
 }
 
@@ -154,6 +158,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Updated] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (10 preceding siblings ...)
  2021-04-08  8:46 ` [PR PATCH] [Updated] " st3r4g
@ 2021-04-08  8:57 ` st3r4g
  2021-04-08 23:12 ` [PR REVIEW] " st3r4g
                   ` (3 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-08  8:57 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1909 bytes --]

There is an updated pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 5744 bytes --]

From 675aa533228074b48b788aaad543a7a6986221c5 Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 ---
 srcpkgs/pipewire/files/README.voidlinux       |  2 ++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----------
 srcpkgs/pipewire/patches/with-bluetooth.patch | 19 ++++++++++++++++++
 srcpkgs/pipewire/template                     | 20 +++++++++++--------
 5 files changed, 33 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch
 create mode 100644 srcpkgs/pipewire/patches/with-bluetooth.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/patches/with-bluetooth.patch b/srcpkgs/pipewire/patches/with-bluetooth.patch
new file mode 100644
index 000000000000..3f6ef0c02fd2
--- /dev/null
+++ b/srcpkgs/pipewire/patches/with-bluetooth.patch
@@ -0,0 +1,19 @@
+Activate bluetooth support only when the bluetooth plugin is installed.
+--- src/daemon/media-session.d/media-session.conf.orig	2021-04-06 17:05:05.935876278 +0200
++++ src/daemon/media-session.d/media-session.conf	2021-04-06 17:06:16.599878154 +0200
+@@ -94,12 +94,14 @@
+     with-alsa = [
+         with-audio
+     ]
++    with-bluetooth = [
++        bluez5
++    ]
+     with-jack = [
+         with-audio
+     ]
+     with-pulseaudio = [
+         with-audio
+-        bluez5
+         restore-stream
+         streams-follow-default
+     ]
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..4d212401bc50 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ libsndfile-devel Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -81,6 +83,8 @@ libspa-bluetooth_package() {
 	short_desc+=" - bluetooth plugins"
 	pkg_install() {
 		vmove usr/lib/spa-0.2/bluez5
+		mkdir -p "${PKGDESTDIR}/etc/pipewire/media-session.d"
+		touch "${PKGDESTDIR}/etc/pipewire/media-session.d/with-bluetooth"
 	}
 }
 
@@ -154,6 +158,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR REVIEW] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (11 preceding siblings ...)
  2021-04-08  8:57 ` st3r4g
@ 2021-04-08 23:12 ` st3r4g
  2021-04-09 10:26 ` [PR PATCH] [Updated] [nomerge] " st3r4g
                   ` (2 subsequent siblings)
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-08 23:12 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 287 bytes --]

New review comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#discussion_r610186996

Comment:
hmm I'm not entirely convinced. There are other plugins that do not throw errors even if enabled... I have to ask why. Please don't merge yet

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Updated] [nomerge] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (12 preceding siblings ...)
  2021-04-08 23:12 ` [PR REVIEW] " st3r4g
@ 2021-04-09 10:26 ` st3r4g
  2021-04-09 10:28 ` [PR REVIEW] " st3r4g
  2021-04-09 15:05 ` [PR PATCH] [Merged]: " ericonr
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-09 10:26 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1919 bytes --]

There is an updated pull request by st3r4g against master on the void-packages repository

https://github.com/st3r4g/void-packages pipewire-0.3.25
https://github.com/void-linux/void-packages/pull/30046

[nomerge] pipewire: update to 0.3.25
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/30046.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.25-30046.patch --]
[-- Type: text/x-diff, Size: 7253 bytes --]

From d64fb30cd8fa776a659aace6f45e84d6d26e8c36 Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Tue, 6 Apr 2021 17:25:47 +0200
Subject: [PATCH] pipewire: update to 0.3.25

* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream
---
 srcpkgs/pipewire/INSTALL.msg                  |  3 --
 srcpkgs/pipewire/files/README.voidlinux       |  2 +
 ...07864d3a1739b8dc1a5355057f29b9a37f78.patch | 52 +++++++++++++++++++
 srcpkgs/pipewire/patches/ncursesw.patch       | 11 ----
 srcpkgs/pipewire/template                     | 18 ++++---
 5 files changed, 64 insertions(+), 22 deletions(-)
 delete mode 100644 srcpkgs/pipewire/INSTALL.msg
 create mode 100644 srcpkgs/pipewire/patches/59ed07864d3a1739b8dc1a5355057f29b9a37f78.patch
 delete mode 100644 srcpkgs/pipewire/patches/ncursesw.patch

diff --git a/srcpkgs/pipewire/INSTALL.msg b/srcpkgs/pipewire/INSTALL.msg
deleted file mode 100644
index 8475a2465b7b..000000000000
--- a/srcpkgs/pipewire/INSTALL.msg
+++ /dev/null
@@ -1,3 +0,0 @@
-WARNING: pipewire frequently changes the config file format. If
-you edited /etc/pipewire/pipewire.conf you must recreate it from
-/etc/pipewire/pipewire.conf.new-0.3.xx with your changes on top.
diff --git a/srcpkgs/pipewire/files/README.voidlinux b/srcpkgs/pipewire/files/README.voidlinux
index 7bcb761273b0..0c3d167f0aef 100644
--- a/srcpkgs/pipewire/files/README.voidlinux
+++ b/srcpkgs/pipewire/files/README.voidlinux
@@ -5,3 +5,5 @@ Optional dependencies:
 * `libjack-pipewire` for jack replacement
 * `libspa-bluetooth` for bluetooth support
 * `libspa-jack` for running pipewire and jack side-by-side
+* `libspa-v4l2` for video camera support
+* `rtkit` for realtime priority acquisition
diff --git a/srcpkgs/pipewire/patches/59ed07864d3a1739b8dc1a5355057f29b9a37f78.patch b/srcpkgs/pipewire/patches/59ed07864d3a1739b8dc1a5355057f29b9a37f78.patch
new file mode 100644
index 000000000000..a033bb5fee7f
--- /dev/null
+++ b/srcpkgs/pipewire/patches/59ed07864d3a1739b8dc1a5355057f29b9a37f78.patch
@@ -0,0 +1,52 @@
+From 59ed07864d3a1739b8dc1a5355057f29b9a37f78 Mon Sep 17 00:00:00 2001
+From: Wim Taymans <wtaymans@redhat.com>
+Date: Fri, 9 Apr 2021 11:55:55 +0200
+Subject: [PATCH] media-session: log info when loading monitor fails
+
+Log info in all monitor plugins instead of an error.
+---
+ src/examples/media-session/alsa-monitor.c  | 1 +
+ src/examples/media-session/bluez-monitor.c | 2 +-
+ src/examples/media-session/v4l2-monitor.c  | 1 +
+ 3 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/src/examples/media-session/alsa-monitor.c b/src/examples/media-session/alsa-monitor.c
+index d97a45a66..72696b772 100644
+--- src/examples/media-session/alsa-monitor.c
++++ src/examples/media-session/alsa-monitor.c
+@@ -1061,6 +1061,7 @@ int sm_alsa_monitor_start(struct sm_media_session *session)
+ 	impl->handle = pw_context_load_spa_handle(context, SPA_NAME_API_ALSA_ENUM_UDEV, NULL);
+ 	if (impl->handle == NULL) {
+ 		res = -errno;
++		pw_log_info("can't load %s: %m", SPA_NAME_API_ALSA_ENUM_UDEV);
+ 		goto out_free;
+ 	}
+ 
+diff --git a/src/examples/media-session/bluez-monitor.c b/src/examples/media-session/bluez-monitor.c
+index 9481d4472..5a4f30d48 100644
+--- src/examples/media-session/bluez-monitor.c
++++ src/examples/media-session/bluez-monitor.c
+@@ -586,7 +586,7 @@ int sm_bluez5_monitor_start(struct sm_media_session *session)
+ 	impl->handle = pw_context_load_spa_handle(context, SPA_NAME_API_BLUEZ5_ENUM_DBUS, &impl->props->dict);
+ 	if (impl->handle == NULL) {
+ 		res = -errno;
+-		pw_log_error("can't load %s: %m", SPA_NAME_API_BLUEZ5_ENUM_DBUS);
++		pw_log_info("can't load %s: %m", SPA_NAME_API_BLUEZ5_ENUM_DBUS);
+ 		goto out_free;
+ 	}
+ 	if ((res = spa_handle_get_interface(impl->handle, SPA_TYPE_INTERFACE_Device, &iface)) < 0) {
+diff --git a/src/examples/media-session/v4l2-monitor.c b/src/examples/media-session/v4l2-monitor.c
+index ecb75d085..2b2a92ef3 100644
+--- src/examples/media-session/v4l2-monitor.c
++++ src/examples/media-session/v4l2-monitor.c
+@@ -550,6 +550,7 @@ int sm_v4l2_monitor_start(struct sm_media_session *sess)
+ 	impl->handle = pw_context_load_spa_handle(context, SPA_NAME_API_V4L2_ENUM_UDEV, NULL);
+ 	if (impl->handle == NULL) {
+ 		res = -errno;
++		pw_log_info("can't load %s: %m", SPA_NAME_API_V4L2_ENUM_UDEV);
+ 		goto out_free;
+ 	}
+ 
+-- 
+GitLab
+
diff --git a/srcpkgs/pipewire/patches/ncursesw.patch b/srcpkgs/pipewire/patches/ncursesw.patch
deleted file mode 100644
index 09b8f071c41c..000000000000
--- a/srcpkgs/pipewire/patches/ncursesw.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- meson.build.orig	2021-02-18 14:35:42.028024846 +0100
-+++ meson.build	2021-02-18 14:39:53.808039159 +0100
-@@ -311,7 +311,7 @@
- pthread_lib = dependency('threads')
- dbus_dep = dependency('dbus-1')
- sdl_dep = dependency('sdl2', required : get_option('sdl2'))
--ncurses_dep = dependency('ncurses', required : false)
-+ncurses_dep = dependency('ncursesw', required : false)
- sndfile_dep = dependency('sndfile', version : '>= 1.0.20', required : get_option('sndfile'))
- 
- if get_option('gstreamer')
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 9ab2c72fb8f7..3536c294cb35 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,15 +1,15 @@
 # Template file for 'pipewire'
 pkgname=pipewire
-version=0.3.24
-revision=2
+version=0.3.25
+revision=1
 build_style=meson
 configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
  -Dbluez5=enabled -Dffmpeg=enabled -Dpipewire-alsa=enabled -Dpipewire-jack=enabled
  -Dvulkan=enabled -Dudevrulesdir=/usr/lib/udev/rules.d"
 hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
-makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
- libopenaptx-devel fdk-aac-devel"
+makedepends="ffmpeg-devel gst-plugins-base1-devel jack-devel sbc-devel v4l-utils-devel
+ libva-devel libbluetooth-devel ncurses-devel libopenaptx-devel fdk-aac-devel
+ libsndfile-devel Vulkan-Headers vulkan-loader $(vopt_if sdl2 SDL2-devel)"
 depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
 short_desc="Server and user space API to deal with multimedia pipelines"
 maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
@@ -17,8 +17,10 @@ license="MIT"
 homepage="https://pipewire.org/"
 changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
 distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=aeca2b44660c4f36eed29cc9c6ccb093ea2778fd0e4ed7665cdfc40b2a49873f
-conf_files="/etc/pipewire/pipewire.conf"
+checksum=fb6d5a0cbde621659ffd67622f19744dd6c8da8745b060cb1951c3d2045e5166
+conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+
+build_options="sdl2"
 
 replaces="libpulseaudio-pipewire>=0"
 
@@ -154,6 +156,6 @@ libjack-pipewire_package() {
 pipewire-doc_package() {
 	short_desc+=" - documentation"
 	pkg_install() {
-		vmove usr/share/doc
+		vmove usr/share/doc/pipewire/html
 	}
 }

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR REVIEW] [nomerge] pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (13 preceding siblings ...)
  2021-04-09 10:26 ` [PR PATCH] [Updated] [nomerge] " st3r4g
@ 2021-04-09 10:28 ` st3r4g
  2021-04-09 15:05 ` [PR PATCH] [Merged]: " ericonr
  15 siblings, 0 replies; 17+ messages in thread
From: st3r4g @ 2021-04-09 10:28 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 332 bytes --]

New review comment by st3r4g on void-packages repository

https://github.com/void-linux/void-packages/pull/30046#discussion_r610519951

Comment:
Upstream decreased the log priority of the message, so it's not an error anymore, and we don't need to change the config. I have backported the patch for this, which is already upstream.

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [PR PATCH] [Merged]: pipewire: update to 0.3.25
  2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
                   ` (14 preceding siblings ...)
  2021-04-09 10:28 ` [PR REVIEW] " st3r4g
@ 2021-04-09 15:05 ` ericonr
  15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-04-09 15:05 UTC (permalink / raw)
  To: ml

[-- Attachment #1: Type: text/plain, Size: 1747 bytes --]

There's a merged pull request on the void-packages repository

pipewire: update to 0.3.25
https://github.com/void-linux/void-packages/pull/30046

Description:
* activate bluetooth support only when the bluetooth plugin is installed
* fix README.voidlinux going in pipewire-doc
* disable SDL2 dep, only used in some examples we don't even ship
* rm INSTALL.msg, configs should be stable now (also mark them in xbps)
* ncursesw.patch is now upstream

Fix #29655

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2021-04-09 15:05 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 15:52 [PR PATCH] pipewire: update to 0.3.25 st3r4g
2021-04-06 15:57 ` [PR PATCH] [Updated] " st3r4g
2021-04-06 16:03 ` st3r4g
2021-04-06 16:07 ` st3r4g
2021-04-06 16:14 ` st3r4g
2021-04-06 16:18 ` [PR PATCH] [Updated] " st3r4g
2021-04-06 16:18 ` st3r4g
2021-04-06 16:50 ` st3r4g
2021-04-06 17:19 ` [PR REVIEW] " ericonr
2021-04-06 17:47 ` st3r4g
2021-04-07 18:10 ` ericonr
2021-04-08  8:46 ` [PR PATCH] [Updated] " st3r4g
2021-04-08  8:57 ` st3r4g
2021-04-08 23:12 ` [PR REVIEW] " st3r4g
2021-04-09 10:26 ` [PR PATCH] [Updated] [nomerge] " st3r4g
2021-04-09 10:28 ` [PR REVIEW] " st3r4g
2021-04-09 15:05 ` [PR PATCH] [Merged]: " ericonr

Github messages for voidlinux

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.vuxu.org/voidlinux-github

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V1 voidlinux-github voidlinux-github/ http://inbox.vuxu.org/voidlinux-github \
		voidlinux-github@inbox.vuxu.org
	public-inbox-index voidlinux-github

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.vuxu.org/vuxu.github.voidlinux


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git