* [PR PATCH] k2pdfopt: remove package
@ 2021-04-04 7:16 sgn
2021-04-09 0:16 ` [PR PATCH] [Merged]: " sgn
0 siblings, 1 reply; 2+ messages in thread
From: sgn @ 2021-04-04 7:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1736 bytes --]
There is a new pull request by sgn against master on the void-packages repository
https://github.com/sgn/void-packages k2pdfopt
https://github.com/void-linux/void-packages/pull/29988
k2pdfopt: remove package
* We've never shipped this package, the build was always broken.
* Build fail continously
* Even the successful build will crash because stack smashed.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29988.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-k2pdfopt-29988.patch --]
[-- Type: text/x-diff, Size: 19414 bytes --]
From 1382f0e2b8479bf4c18cdf75f2ca15c79e1c9b81 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C4=90o=C3=A0n=20Tr=E1=BA=A7n=20C=C3=B4ng=20Danh?=
<congdanhqx@gmail.com>
Date: Wed, 17 Mar 2021 08:42:17 +0700
Subject: [PATCH] k2pdfopt: remove package
* We've never shipped this package, the build was always broken.
* Build fail continously
* Even the successful build will crash because stack smashed.
---
.../patches/01-CMakeLists.txt-fixes.patch | 87 ------
| 83 ------
.../03-willuslib-ocrtess.c-tesscapi-fix.patch | 262 ------------------
.../04-willuslib-wmupdfinfo.c-mupdf-fix.patch | 26 --
.../patches/05-willuslib-bmpmupdf.c-fix.patch | 8 -
srcpkgs/k2pdfopt/template | 18 --
6 files changed, 484 deletions(-)
delete mode 100644 srcpkgs/k2pdfopt/patches/01-CMakeLists.txt-fixes.patch
delete mode 100644 srcpkgs/k2pdfopt/patches/02-header-fixes.patch
delete mode 100644 srcpkgs/k2pdfopt/patches/03-willuslib-ocrtess.c-tesscapi-fix.patch
delete mode 100644 srcpkgs/k2pdfopt/patches/04-willuslib-wmupdfinfo.c-mupdf-fix.patch
delete mode 100644 srcpkgs/k2pdfopt/patches/05-willuslib-bmpmupdf.c-fix.patch
delete mode 100644 srcpkgs/k2pdfopt/template
diff --git a/srcpkgs/k2pdfopt/patches/01-CMakeLists.txt-fixes.patch b/srcpkgs/k2pdfopt/patches/01-CMakeLists.txt-fixes.patch
deleted file mode 100644
index 07931dd43470..000000000000
--- a/srcpkgs/k2pdfopt/patches/01-CMakeLists.txt-fixes.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-diff --git CMakeLists.txt CMakeLists.txt
-index 4a2378b5e9..2ed0ccca4b 100644
---- CMakeLists.txt
-+++ CMakeLists.txt
-@@ -54,0 +55 @@
-+ set(K2PDFOPT_LIB ${K2PDFOPT_LIB} ${JASPER_LIBRARY})
-@@ -57,11 +58 @@
--# paths from willuslib/wgs.c
--find_program(GHOSTSCRIPT_EXECUTABLE gs
--# PATHS /usr/bin /usr/share/gs /usr/local/gs /opt/gs
--# /usr/share/gs* /usr/local/gs* /opt/gs*
--)
--if(GHOSTSCRIPT_EXECUTABLE)
-- set(HAVE_GHOSTSCRIPT 1)
-- message(STATUS "Found ghostscript executable")
--else()
-- message(STATUS "Could NOT find ghostscript executable")
--endif(GHOSTSCRIPT_EXECUTABLE)
-+set(HAVE_GHOSTSCRIPT 1)
-@@ -70 +60,0 @@
--# HAVE_GSL_LIB
-@@ -71,0 +62,6 @@
-+pkg_check_modules(GSL gsl)
-+if(GSL_FOUND)
-+ set(HAVE_GSL_LIB 1)
-+ include_directories(SYSTEM ${GSL_INCLUDEDIR})
-+ set(K2PDFOPT_LIB ${K2PDFOPT_LIB} ${GSL_LDFLAGS})
-+endif(GSL_FOUND)
-@@ -76,2 +71,0 @@
--pkg_check_modules(MUPDF mupdf)
--if(MUPDF_FOUND)
-@@ -79,7 +73 @@
-- # (includes jbig2dec, openjpeg, freetype)
-- include_directories(SYSTEM ${MUPDF_INCLUDEDIR})
-- message(STATUS "mupdf libraries: ${MUPDF_LDFLAGS}")
-- set(K2PDFOPT_LIB ${K2PDFOPT_LIB} ${MUPDF_LDFLAGS}
-- -lmupdf-js-none -lopenjpeg -ljbig2dec -ljpeg -lfreetype
-- )
--endif(MUPDF_FOUND)
-+set(K2PDFOPT_LIB ${K2PDFOPT_LIB} -pthread -lmupdf -lmupdf-third -lopenjp2 -ljbig2dec -lfreetype -lharfbuzz)
-@@ -95,2 +91,14 @@
--# HAVE_LEPTONICA_LIB
--# HAVE_TESSERACT_LIB
-+
-+pkg_check_modules(LEPTONICA lept)
-+if(LEPTONICA_FOUND)
-+ set(HAVE_LEPTONICA_LIB 1)
-+ include_directories(SYSTEM ${LEPTONICA_INCLUDEDIR})
-+ set(K2PDFOPT_LIB ${K2PDFOPT_LIB} ${LEPTONICA_LDFLAGS} ${LEPTONICA_LIBRARIES})
-+endif(LEPTONICA_FOUND)
-+
-+pkg_check_modules(TESSERACT tesseract)
-+if(TESSERACT_FOUND)
-+ set(HAVE_TESSERACT_LIB 1)
-+ include_directories(SYSTEM ${TESSERACT_INCLUDEDIR})
-+ set(K2PDFOPT_LIB ${K2PDFOPT_LIB} ${TESSERACT_LDFLAGS})
-+endif(TESSERACT_FOUND)
-@@ -100 +108 @@
--SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DUSE_CMAKE -Wall")
-+SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DUSE_CMAKE -Wall -Wextra")
-@@ -108,0 +117,2 @@
-+include_directories(${PROJECT_BINARY_DIR})
-+
-@@ -112 +121,0 @@
--# ms
-@@ -114 +123 @@
--target_link_libraries (k2pdfopt k2pdfoptlib willuslib ${K2PDFOPT_LIB})
-+target_link_libraries(k2pdfopt k2pdfoptlib willuslib ${K2PDFOPT_LIB})
-@@ -115,0 +125 @@
-+install(TARGETS k2pdfopt RUNTIME DESTINATION bin)
-diff --git willuslib/CMakeLists.txt willuslib/CMakeLists.txt
-index 463bbc95e7..104d02e360 100644
---- willuslib/CMakeLists.txt
-+++ willuslib/CMakeLists.txt
-@@ -9 +9 @@
-- ocrjocr.c ocrtess.c pdfwrite.c point2d.c render.c strbuf.c string.c
-+ ocrgocr.c ocrtess.c pdfwrite.c point2d.c render.c strbuf.c string.c
-@@ -24,0 +25,4 @@
-+if(TESSERACT_FOUND)
-+ set(WILLUSLIB_SRC ${WILLUSLIB_SRC} ocrtess.c)
-+endif(TESSERACT_FOUND)
-+
-@@ -29,3 +33 @@
--# HAVE_GOCR_LIB: ocrjocr.c
--# HAVE_TESSERACT_LIB: ocrtess.c
--
-+# HAVE_GOCR_LIB: ocrgocr.c
diff --git a/srcpkgs/k2pdfopt/patches/02-header-fixes.patch b/srcpkgs/k2pdfopt/patches/02-header-fixes.patch
deleted file mode 100644
index 1b5667fc09ca..000000000000
--- a/srcpkgs/k2pdfopt/patches/02-header-fixes.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-diff --git willuslib/gslpolyfit.c willuslib/gslpolyfit.c
-index 5d2b6fbb85..f127bf054f 100644
---- willuslib/gslpolyfit.c
-+++ willuslib/gslpolyfit.c
-@@ -24,7 +24,10 @@
- #include <stdlib.h>
- #include "willus.h"
- #ifdef HAVE_GSL_LIB
--#include <gsl.h>
-+#include <gsl/gsl_poly.h>
-+#include <gsl/gsl_vector.h>
-+#include <gsl/gsl_multifit.h>
-+#include <gsl/gsl_matrix.h>
- #endif
-
- void gslpolyfit(double *x,double *y0,int n,int d,double *c0)
-diff --git willuslib/bmp.c willuslib/bmp.c
-index 583644d565..b2c36d5673 100644
---- willuslib/bmp.c
-+++ willuslib/bmp.c
-@@ -37,7 +37,7 @@
- #include <jpeglib.h>
- #endif
- #ifdef HAVE_JASPER_LIB
--#include <jasper.h>
-+#include <jasper/jasper.h>
- #endif
-
- #define BOUND(x,xmin,xmax) if ((x)<(xmin)) (x)=(xmin); else { if ((x)>(xmax)) (x)=(xmax); }
-diff --git willuslib/ocrtess.c willuslib/ocrtess.c
-index e1366e1aab..58aaf97fb9 100644
---- willuslib/ocrtess.c
-+++ willuslib/ocrtess.c
-@@ -24,8 +24,9 @@
- #include <stdlib.h>
- #include <string.h>
- #include <ctype.h>
--#include <leptonica.h>
--#include <tesseract.h>
-+#include <locale.h>
-+#include <leptonica/allheaders.h>
-+#include <tesseract/capi.h>
- #include "willus.h"
-
-
-diff --git willuslib/wleptonica.c willuslib/wleptonica.c
-index a4e3cfd61d..a85be0949d 100644
---- willuslib/wleptonica.c
-+++ willuslib/wleptonica.c
-@@ -23,7 +23,7 @@
- #include "willus.h"
-
- #ifdef HAVE_LEPTONICA_LIB
--#include <leptonica.h>
-+#include <leptonica/allheaders.h>
-
- static void wlept_pix_from_bmp(PIX **pixptr,WILLUSBITMAP *bmp);
- static void wlept_bmp_from_pix(WILLUSBITMAP *bmp,PIX *pix);
-@@ -135,7 +135,7 @@ pixWrite("pixb.png",pixb,IFF_PNG);
- dew1=dewarpCreate(pixb,1);
- pixDestroy(&pixb);
- dewarpaInsertDewarp(dewa,dew1);
-- dewarpBuildPageModel_ex(dew1,debug,fit_order);
-+ dewarpBuildPageModel(dew1,debug);
- if (bmp1!=NULL)
- {
- PIX *pix2,*pix2d;
-
-diff --git willuslib/wmupdf.c willuslib/wmupdf.c
-index 81627efd4c..fcab84c1db 100644
---- willuslib/wmupdf.c
-+++ willuslib/wmupdf.c
-@@ -189,8 +189,8 @@ int wmupdf_remake_pdf(char *infile,char *outfile,WPDFPAGEINFO *pageinfo,int use_
- pdf_write_opts.do_compress=1;
- pdf_write_opts.do_linear=0;
- pdf_write_opts.do_garbage=1; /* 2 and 3 don't work for this. */
-- pdf_write_opts.continue_on_error=0;
-- pdf_write_opts.errors=NULL;
-+ //pdf_write_opts.continue_on_error=0;
-+ //pdf_write_opts.errors=NULL;
- write_failed=0;
- wpdfpageinfo_sort(pageinfo);
- xref=NULL;
diff --git a/srcpkgs/k2pdfopt/patches/03-willuslib-ocrtess.c-tesscapi-fix.patch b/srcpkgs/k2pdfopt/patches/03-willuslib-ocrtess.c-tesscapi-fix.patch
deleted file mode 100644
index adc76c83866f..000000000000
--- a/srcpkgs/k2pdfopt/patches/03-willuslib-ocrtess.c-tesscapi-fix.patch
+++ /dev/null
@@ -1,262 +0,0 @@
-diff -r -u0 willuslib/ocrtess.c willuslib/ocrtess.c
---- willuslib/ocrtess.c 2018-12-31 19:59:58.000000000 +0100
-+++ willuslib/ocrtess.c 2019-07-27 18:47:06.706765733 +0200
-@@ -29,0 +30,258 @@
-+
-+
-+/*
-+** ocr_type=0: OEM_DEFAULT
-+** ocr_type=1: OEM_TESSERACT_ONLY
-+** ocr_type=2: OEM_LSTM_ONLY
-+** ocr_type=3: OEM_TESSERACT_LSTM_COMBINED
-+*/
-+void *tess_capi_init(char *datapath,char *language,int ocr_type,FILE *out,
-+ char *initstr,int maxlen,int *status)
-+
-+ {
-+ char original_locale[256];
-+ TessBaseAPI *api = TessBaseAPICreate();
-+
-+ /* willus mod, 11-24-16 */
-+ /* Tesseract needs "C" locale to correctly parse all data .traineddata files. */
-+
-+ strncpy(original_locale,setlocale(LC_ALL,NULL),255);
-+ original_locale[255]='\0';
-+ setlocale(LC_ALL,"C");
-+
-+ // Make the order of args a bit more forgiving than it used to be.
-+ const char* lang = "eng";
-+ TessPageSegMode pagesegmode = PSM_SINGLE_BLOCK;
-+ if (language!=NULL && language[0]!='\0')
-+ lang = language;
-+
-+/*
-+v4.00 loads either TESSERACT enginer, LSTM engine, or both. No CUBE.
-+*/
-+ ocr_type=0; /* Ignore specified and use default */
-+ TessBaseAPISetOutputName(api, NULL);
-+ (*status)=TessBaseAPIInit2(api, datapath,lang,
-+ ocr_type==0 ? OEM_DEFAULT :
-+ (ocr_type==1 ? OEM_TESSERACT_ONLY :
-+ (ocr_type==2 ? OEM_LSTM_ONLY :
-+ (OEM_TESSERACT_LSTM_COMBINED))));
-+ if ((*status)!=0)
-+ {
-+ /* willus mod, 11-24-16 */
-+ setlocale(LC_ALL,original_locale);
-+ TessBaseAPIEnd(api);
-+ TessBaseAPIDelete(api);
-+ return(NULL);
-+ }
-+ /*
-+ api.Init("tesscapi",lang,tesseract::OEM_DEFAULT,
-+ &(argv[arg]), argc - arg, NULL, NULL, false);
-+ */
-+ // We have 2 possible sources of pagesegmode: a config file and
-+ // the command line. For backwards compatability reasons, the
-+ // default in tesseract is tesseract::PSM_SINGLE_BLOCK, but the
-+ // default for this program is tesseract::PSM_AUTO. We will let
-+ // the config file take priority, so the command-line default
-+ // can take priority over the tesseract default, so we use the
-+ // value from the command line only if the retrieved mode
-+ // is still tesseract::PSM_SINGLE_BLOCK, indicating no change
-+ // in any config file. Therefore the only way to force
-+ // tesseract::PSM_SINGLE_BLOCK is from the command line.
-+ // It would be simpler if we could set the value before Init,
-+ // but that doesn't work.
-+ if (TessBaseAPIGetPageSegMode(api) == PSM_SINGLE_BLOCK)
-+ TessBaseAPISetPageSegMode(api, pagesegmode);
-+
-+ /*
-+ ** Initialization message
-+ */
-+ {
-+ char istr[1024];
-+
-+// printf("tessedit_ocr_engine_mode = %d\n",tessedit_ocr_engine_mode);
-+ sprintf(istr,"%s",TessVersion());
-+ sprintf(&istr[strlen(istr)],"\n Tesseract data folder = '%s'",datapath==NULL?getenv("TESSDATA_PREFIX"):datapath);
-+ strcat(istr,"\n Tesseract languages: ");
-+ char** languages = TessBaseAPIGetAvailableLanguagesAsVector(api);
-+/*
-+printf("OEM=%d\n",api->oem());
-+printf("Langs='%s'\n",api->GetInitLanguagesAsString());
-+printf("AnyTessLang()=%d\n",(int)api->tesseract()->AnyTessLang());
-+printf("AnyLSTMLang()=%d\n",(int)api->tesseract()->AnyLSTMLang());
-+printf("num_sub_langs()=%d\n",api->tesseract()->num_sub_langs());
-+printf("languages.size()=%d\n",(int)languages.size());
-+*/
-+ char* l = languages;
-+ int eng = 0;
-+ TessBaseAPI *lang1;
-+ while (l != NULL)
-+ {
-+ eng=(int)TessBaseAPIOem(api);
-+ sprintf(&istr[strlen(istr)],"%s%s [%s]",l==languages?"":", ",l,
-+ eng==2?"LSTM+Tess":(eng==1?"LSTM":"Tess"));
-+ l++;
-+ }
-+
-+ TessDeleteTextArray(languages);
-+
-+ /*
-+ if (ocr_type==0 || ocr_type==3)
-+ sprintf(&istr[strlen(istr)],"[LSTM+] (lang=");
-+ else if (ocr_type==2)
-+ sprintf(&istr[strlen(istr)],"[LSTM] (lang=");
-+ strncpy(&istr[strlen(istr)],language,253-strlen(istr));
-+ istr[253]='\0';
-+ strcat(istr,")");
-+ */
-+ if (out!=NULL)
-+ fprintf(out,"%s\n",istr);
-+ if (initstr!=NULL)
-+ {
-+ strncpy(initstr,istr,maxlen-1);
-+ initstr[maxlen-1]='\0';
-+ }
-+ }
-+
-+
-+ /* Turn off LSTM debugging output */
-+ TessBaseAPISetVariable(api,"lstm_debug_level","0");
-+#if (WILLUSDEBUG & 1)
-+ TessBaseAPISetVariable(api,"lstm_debug_level","9");
-+ TessBaseAPISetVariable(api,"paragraph_debug_level","9");
-+ TessBaseAPISetVariable(api,"tessdata_manager_debug_level","9");
-+ TessBaseAPISetVariable(api,"tosp_debug_level","9");
-+ TessBaseAPISetVariable(api,"wordrec_debug_level","9");
-+ TessBaseAPISetVariable(api,"segsearch_debug_level","9");
-+#endif
-+ /* willus mod, 11-24-16 */
-+ setlocale(LC_ALL,original_locale);
-+ return((void *)api);
-+ }
-+
-+
-+int tess_capi_get_ocr(void *vapi,PIX *pix,char *outstr,int maxlen,int segmode,FILE *out)
-+
-+ {
-+ TessBaseAPI *api;
-+ static int old_segmode=-1;
-+
-+ api=(TessBaseAPI *)vapi;
-+ if (old_segmode != segmode)
-+ {
-+ old_segmode=segmode;
-+ TessBaseAPISetPageSegMode(api, (TessPageSegMode)segmode);
-+ }
-+ if (!TessBaseAPIProcessPage(api,pix,0,NULL,NULL,0,NULL))
-+ {
-+ /* pixDestroy(&pix); */
-+ if (out!=NULL)
-+ fprintf(out,"tesscapi: Error during bitmap processing.\n");
-+ TessBaseAPIClear(api);
-+ return(-1);
-+ }
-+ char* text = TessBaseAPIGetUTF8Text(api);
-+ strncpy(outstr,text,maxlen-1);
-+ outstr[maxlen-1]='\0';
-+ TessDeleteText(text);
-+ TessBaseAPIClear(api);
-+ return(0);
-+ }
-+
-+
-+int tess_capi_get_ocr_multiword(void *vapi,PIX *pix,int segmode,
-+ int **left,int **top,int **right,int **bottom,
-+ int **ybase,char **text,int *nw,
-+ FILE *out)
-+
-+ {
-+ TessBaseAPI *api;
-+ static int old_segmode=-1;
-+
-+ api=(TessBaseAPI *)vapi;
-+ if (old_segmode != segmode)
-+ {
-+ old_segmode=segmode;
-+ TessBaseAPISetPageSegMode(api, (TessPageSegMode)segmode);
-+ }
-+ if (!TessBaseAPIProcessPage(api,pix,0,NULL,NULL,0,NULL))
-+ {
-+ if (out!=NULL)
-+ fprintf(out,"tesscapi: Error during bitmap processing.\n");
-+ TessBaseAPIClear(api);
-+ (*nw)=0;
-+ return(-1);
-+ }
-+
-+ //(*nw)=api->GetOCRWords(left,top,right,bottom,ybase,text);
-+
-+ int iword,nwords,totlen,it8;
-+ int *x0,*y0,*x1,*y1,*ybaseline;
-+ char *tutf8;
-+
-+ TessResultIterator *res_it = TessBaseAPIGetIterator(api);
-+ /* Count words */
-+ iword=0;
-+ totlen=0;
-+ while(TessResultIteratorNext(res_it, RIL_BLOCK))
-+ {
-+ if(!TessResultIteratorNext(res_it, RIL_WORD))
-+ {
-+ continue;
-+ }
-+ iword++;
-+ char* textstr = TessResultIteratorGetUTF8Text(res_it, RIL_WORD);
-+ totlen+=strlen(textstr)+1;
-+ }
-+ nwords = iword;
-+
-+ x0=(*left)=(int *)malloc(sizeof(int)*5*nwords);
-+ y0=(*top)=&x0[nwords];
-+ x1=(*right)=&y0[nwords];
-+ y1=(*bottom)=&x1[nwords];
-+ ybaseline=(*ybase)=&y1[nwords];
-+ tutf8=(*text)=(char *)malloc(totlen);
-+ iword=0;
-+ it8=0;
-+ TessPageIteratorBegin( (TessPageIterator *) res_it);
-+ while (TessResultIteratorNext(res_it, RIL_BLOCK))
-+ {
-+ if (!TessResultIteratorNext(res_it, RIL_WORD))
-+ {
-+ continue;
-+ }
-+ char* textstr = TessResultIteratorGetUTF8Text(res_it, RIL_WORD);
-+ strcpy(&tutf8[it8],textstr);
-+ it8 += strlen(&tutf8[it8])+1;
-+
-+ int bbleft, bbtop, bbright, bbbottom;
-+ int u1,v1,u2,v2;
-+ TessPageIteratorBoundingBox( (TessPageIterator *) res_it, RIL_WORD, &bbleft, &bbtop, &bbright, &bbbottom);
-+ TessPageIteratorBaseline( (TessPageIterator *) res_it, RIL_WORD, &u1, &v1, &u2, &v2);
-+ x0[iword]=bbleft;
-+ x1[iword]=bbright;
-+ y0[iword]=bbtop;
-+ y1[iword]=bbbottom;
-+ ybaseline[iword]=(v1+v2)/2;
-+ iword++;
-+ }
-+
-+ TessResultIteratorDelete(res_it);
-+
-+ (*nw) = iword;
-+
-+ TessBaseAPIClear(api);
-+ return(0);
-+ }
-+
-+
-+void tess_capi_end(void *vapi)
-+
-+ {
-+ TessBaseAPI *api;
-+
-+ if (vapi==NULL)
-+ return;
-+ api=(TessBaseAPI *)vapi;
-+ TessBaseAPIEnd(api);
-+ TessBaseAPIDelete(api);
-+ }
diff --git a/srcpkgs/k2pdfopt/patches/04-willuslib-wmupdfinfo.c-mupdf-fix.patch b/srcpkgs/k2pdfopt/patches/04-willuslib-wmupdfinfo.c-mupdf-fix.patch
deleted file mode 100644
index 1b3bf4d057ad..000000000000
--- a/srcpkgs/k2pdfopt/patches/04-willuslib-wmupdfinfo.c-mupdf-fix.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-diff -r -w -u0 willuslib/wmupdfinfo.c willuslib/wmupdfinfo.c
---- willuslib/wmupdfinfo.c 2018-11-21 10:05:22.000000000 +0100
-+++ willuslib/wmupdfinfo.c 2019-07-27 19:56:23.418595275 +0200
-@@ -217 +217 @@
-- pdf_print_obj(ctx, out, pdf_resolve_indirect(ctx, obj), 1);
-+ pdf_print_obj(ctx, out, pdf_resolve_indirect(ctx, obj), 1, 1);
-@@ -224 +224 @@
-- pdf_print_obj(ctx, out, pdf_resolve_indirect(ctx, obj), 1);
-+ pdf_print_obj(ctx, out, pdf_resolve_indirect(ctx, obj), 1, 1);
-@@ -240 +240 @@
-- n=pdf_sprint_obj(ctx,NULL,0,robj,1);
-+ char* f = pdf_sprint_obj(ctx,NULL,0,&n,robj,1,1);
-@@ -245 +245 @@
-- pdf_print_obj(ctx,out,robj,1);
-+ pdf_print_obj(ctx,out,robj,1,1);
-@@ -249 +249,2 @@
-- pdf_sprint_obj(ctx,buf,n+2,robj,1);
-+ int len = 0;
-+ char* d = pdf_sprint_obj(ctx,buf,n+2,&len,robj,1,1);
-@@ -256,0 +258 @@
-+ fz_free(ctx, d);
-@@ -257,0 +260 @@
-+ fz_free(ctx, f);
-@@ -278 +281 @@
-- pdf_print_obj(ctx,out, pdf_resolve_indirect(ctx,obj), 1);
-+ pdf_print_obj(ctx,out, pdf_resolve_indirect(ctx,obj), 1, 1);
diff --git a/srcpkgs/k2pdfopt/patches/05-willuslib-bmpmupdf.c-fix.patch b/srcpkgs/k2pdfopt/patches/05-willuslib-bmpmupdf.c-fix.patch
deleted file mode 100644
index 7ed4528e8faf..000000000000
--- a/srcpkgs/k2pdfopt/patches/05-willuslib-bmpmupdf.c-fix.patch
+++ /dev/null
@@ -1,8 +0,0 @@
-diff -r -w -u0 willuslib/bmpmupdf.c willuslib/bmpmupdf.c
---- willuslib/bmpmupdf.c 2018-11-20 21:13:12.000000000 +0100
-+++ willuslib/bmpmupdf.c 2019-07-27 20:12:37.386555334 +0200
-@@ -28 +28,3 @@
--void pdf_install_load_system_font_funcs(fz_context *ctx);
-+void pdf_install_load_system_font_funcs(fz_context *ctx)
-+{
-+}
diff --git a/srcpkgs/k2pdfopt/template b/srcpkgs/k2pdfopt/template
deleted file mode 100644
index a099962a8063..000000000000
--- a/srcpkgs/k2pdfopt/template
+++ /dev/null
@@ -1,18 +0,0 @@
-# Template file for 'k2pdfopt'
-pkgname=k2pdfopt
-version=2.51
-revision=1
-wrksrc="${pkgname}_v${version}"
-build_style=cmake
-hostmakedepends="pkgconf unzip"
-makedepends="zlib-devel libpng-devel libjpeg-turbo-devel jasper-devel
- freetype-devel libopenjpeg2-devel jbig2dec-devel djvulibre-devel
- tesseract-ocr-devel leptonica-devel gsl-devel mupdf-devel harfbuzz-devel"
-depends="ghostscript"
-short_desc="Optimize PDF/DJVU files for mobile e-readers and smartphones"
-maintainer="John Eira <john.eira@web.de>"
-license="GPL-3.0-or-later"
-homepage="https://willus.com/k2pdfopt/"
-distfiles="http://willus.com/k2pdfopt/src/k2pdfopt_v${version}_src.zip"
-checksum="3e6e4d7aac9c9bed4c7854888a6a91213be10121be76e17f83e080e829ac5fde"
-broken="https://build.voidlinux.org/builders/x86_64-musl_builder/builds/22343/steps/shell_3/logs/stdio"
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PR PATCH] [Merged]: k2pdfopt: remove package
2021-04-04 7:16 [PR PATCH] k2pdfopt: remove package sgn
@ 2021-04-09 0:16 ` sgn
0 siblings, 0 replies; 2+ messages in thread
From: sgn @ 2021-04-09 0:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1592 bytes --]
There's a merged pull request on the void-packages repository
k2pdfopt: remove package
https://github.com/void-linux/void-packages/pull/29988
Description:
* We've never shipped this package, the build was always broken.
* Build fail continously
* Even the successful build will crash because stack smashed.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-09 0:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-04 7:16 [PR PATCH] k2pdfopt: remove package sgn
2021-04-09 0:16 ` [PR PATCH] [Merged]: " sgn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).