* [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package
@ 2021-03-11 11:11 4ricci
2021-03-11 19:41 ` Chocimier
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: 4ricci @ 2021-03-11 11:11 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1659 bytes --]
There is a new pull request by 4ricci against master on the void-packages repository
https://github.com/4ricci/void-packages pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
pipe-viewer: update to 0.0.8; straw-viewer: remove package
- pipe-viewer: update to 0.0.8
- straw-viewer: remove package
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29393.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipe-viewer-29393.patch --]
[-- Type: text/x-diff, Size: 3552 bytes --]
From 129928e76436cd2ec35c6bc7ea7f90b7d4e5e99e Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 11:50:24 +0100
Subject: [PATCH 1/2] pipe-viewer: update to 0.0.8
---
srcpkgs/pipe-viewer/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipe-viewer/template b/srcpkgs/pipe-viewer/template
index 32991f6806b..70a865c5c7a 100644
--- a/srcpkgs/pipe-viewer/template
+++ b/srcpkgs/pipe-viewer/template
@@ -1,11 +1,10 @@
# Template file for 'pipe-viewer'
pkgname=pipe-viewer
-version=0.0.7
+version=0.0.8
revision=1
build_style=perl-ModuleBuild
configure_args="--gtk"
hostmakedepends="perl-Module-Build"
-makedepends="perl"
depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu
perl-Unicode-LineBreak perl-JSON-XS"
checkdepends="perl-Test-Pod"
@@ -15,11 +14,13 @@ license="Artistic-2.0"
homepage="https://github.com/trizen/pipe-viewer"
changelog="https://github.com/trizen/pipe-viewer/releases"
distfiles="https://github.com/trizen/pipe-viewer/archive/${version}.tar.gz"
-checksum=5e1211ec963aa2a187bcb0983227c5667e6c580bfc9de93dcb582388cc1baf22
+checksum=a8d4c1d15d8d8ab7142d5bc25e6c9b988f5203f70676717a48eb12516ec86806
+replaces="straw-viewer>=0"
pipe-viewer-gtk_package() {
depends="${sourcepkg}>=${version}_${revision} perl-Gtk3 perl-File-ShareDir"
short_desc+=" - GTK interface"
+ replaces="gtk-straw-viewer>=0"
pkg_install() {
vmove usr/bin/gtk-pipe-viewer
vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-PipeViewer/gtk-*"
From e09229b6abf308d2c400cd47dccc719f4d634ad4 Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 12:09:00 +0100
Subject: [PATCH 2/2] straw-viewer: remove package
deprecated in favour of pipe-viewer
---
srcpkgs/gtk-straw-viewer | 1 -
srcpkgs/straw-viewer/template | 26 --------------------------
2 files changed, 27 deletions(-)
delete mode 120000 srcpkgs/gtk-straw-viewer
delete mode 100644 srcpkgs/straw-viewer/template
diff --git a/srcpkgs/gtk-straw-viewer b/srcpkgs/gtk-straw-viewer
deleted file mode 120000
index 790444aff1b..00000000000
--- a/srcpkgs/gtk-straw-viewer
+++ /dev/null
@@ -1 +0,0 @@
-straw-viewer
\ No newline at end of file
diff --git a/srcpkgs/straw-viewer/template b/srcpkgs/straw-viewer/template
deleted file mode 100644
index b3a9137af08..00000000000
--- a/srcpkgs/straw-viewer/template
+++ /dev/null
@@ -1,26 +0,0 @@
-# Template file for 'straw-viewer'
-pkgname=straw-viewer
-version=0.1.3
-revision=1
-build_style=perl-ModuleBuild
-configure_args="--gtk"
-hostmakedepends="perl-Module-Build"
-makedepends="perl"
-depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu"
-short_desc="Search and stream from YouTube using the API of invidio.us"
-maintainer="Roberto Ricci <ricci@disroot.org>"
-license="Artistic-2.0"
-homepage="https://github.com/trizen/straw-viewer"
-changelog="https://github.com/trizen/straw-viewer/releases"
-distfiles="https://github.com/trizen/straw-viewer/archive/${version}.tar.gz"
-checksum=e6afc6a87578a55b17666a79b813657daac93f78aaf810d1aa03fcb4a7354bf4
-
-gtk-straw-viewer_package() {
- depends="${sourcepkg}-${version}_${revision} perl-Gtk3 perl-File-ShareDir"
- short_desc="Gtk interface to search and stream YouTube using the API of invidio.us"
- pkg_install() {
- vmove usr/bin/gtk-straw-viewer
- vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/gtk-*"
- vmove usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/icons
- }
-}
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: pipe-viewer: update to 0.0.8; straw-viewer: remove package
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
@ 2021-03-11 19:41 ` Chocimier
2021-03-11 22:35 ` [PR PATCH] [Updated] " 4ricci
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Chocimier @ 2021-03-11 19:41 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 256 bytes --]
New comment by Chocimier on void-packages repository
https://github.com/void-linux/void-packages/pull/29393#issuecomment-796999176
Comment:
If you want to straw-viewer to be updated to pipe-viewer, leave it as transitional package and remove `replaces`.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Updated] pipe-viewer: update to 0.0.8; straw-viewer: remove package
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
2021-03-11 19:41 ` Chocimier
@ 2021-03-11 22:35 ` 4ricci
2021-04-10 14:58 ` FollieHiyuki
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-03-11 22:35 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1664 bytes --]
There is an updated pull request by 4ricci against master on the void-packages repository
https://github.com/4ricci/void-packages pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
pipe-viewer: update to 0.0.8; straw-viewer: remove package
- pipe-viewer: update to 0.0.8
- straw-viewer: remove package
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29393.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipe-viewer-29393.patch --]
[-- Type: text/x-diff, Size: 3262 bytes --]
From 36d220b9dee54ff7436ff8b4dc1b6523a326ca14 Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 11:50:24 +0100
Subject: [PATCH 1/2] pipe-viewer: update to 0.0.8
---
srcpkgs/pipe-viewer/template | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipe-viewer/template b/srcpkgs/pipe-viewer/template
index 32991f6806b..51712b725b3 100644
--- a/srcpkgs/pipe-viewer/template
+++ b/srcpkgs/pipe-viewer/template
@@ -1,11 +1,10 @@
# Template file for 'pipe-viewer'
pkgname=pipe-viewer
-version=0.0.7
+version=0.0.8
revision=1
build_style=perl-ModuleBuild
configure_args="--gtk"
hostmakedepends="perl-Module-Build"
-makedepends="perl"
depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu
perl-Unicode-LineBreak perl-JSON-XS"
checkdepends="perl-Test-Pod"
@@ -15,7 +14,7 @@ license="Artistic-2.0"
homepage="https://github.com/trizen/pipe-viewer"
changelog="https://github.com/trizen/pipe-viewer/releases"
distfiles="https://github.com/trizen/pipe-viewer/archive/${version}.tar.gz"
-checksum=5e1211ec963aa2a187bcb0983227c5667e6c580bfc9de93dcb582388cc1baf22
+checksum=a8d4c1d15d8d8ab7142d5bc25e6c9b988f5203f70676717a48eb12516ec86806
pipe-viewer-gtk_package() {
depends="${sourcepkg}>=${version}_${revision} perl-Gtk3 perl-File-ShareDir"
From f0677e58fa7912df46d726ee1b452139be703138 Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 23:28:00 +0100
Subject: [PATCH 2/2] straw-viewer: replace with pipe-viewer
---
srcpkgs/straw-viewer/template | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/srcpkgs/straw-viewer/template b/srcpkgs/straw-viewer/template
index b3a9137af08..49687dc3034 100644
--- a/srcpkgs/straw-viewer/template
+++ b/srcpkgs/straw-viewer/template
@@ -1,26 +1,15 @@
# Template file for 'straw-viewer'
pkgname=straw-viewer
version=0.1.3
-revision=1
-build_style=perl-ModuleBuild
-configure_args="--gtk"
-hostmakedepends="perl-Module-Build"
-makedepends="perl"
-depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu"
-short_desc="Search and stream from YouTube using the API of invidio.us"
+revision=2
+build_style=meta
+depends="pipe-viewer"
+short_desc="Search and stream from YouTube using the API of invidio.us (transitional dummy package)"
maintainer="Roberto Ricci <ricci@disroot.org>"
license="Artistic-2.0"
homepage="https://github.com/trizen/straw-viewer"
-changelog="https://github.com/trizen/straw-viewer/releases"
-distfiles="https://github.com/trizen/straw-viewer/archive/${version}.tar.gz"
-checksum=e6afc6a87578a55b17666a79b813657daac93f78aaf810d1aa03fcb4a7354bf4
gtk-straw-viewer_package() {
- depends="${sourcepkg}-${version}_${revision} perl-Gtk3 perl-File-ShareDir"
- short_desc="Gtk interface to search and stream YouTube using the API of invidio.us"
- pkg_install() {
- vmove usr/bin/gtk-straw-viewer
- vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/gtk-*"
- vmove usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/icons
- }
+ depends="pipe-viewer-gtk"
+ short_desc="Gtk interface to search and stream YouTube using the API of invidio.us (transitional dummy package)"
}
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: pipe-viewer: update to 0.0.8; straw-viewer: remove package
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
2021-03-11 19:41 ` Chocimier
2021-03-11 22:35 ` [PR PATCH] [Updated] " 4ricci
@ 2021-04-10 14:58 ` FollieHiyuki
2021-04-10 20:18 ` [PR PATCH] [Updated] " 4ricci
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: FollieHiyuki @ 2021-04-10 14:58 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 160 bytes --]
New comment by FollieHiyuki on void-packages repository
https://github.com/void-linux/void-packages/pull/29393#issuecomment-817149414
Comment:
0.0.9 came out
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Updated] pipe-viewer: update to 0.0.8; straw-viewer: remove package
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (2 preceding siblings ...)
2021-04-10 14:58 ` FollieHiyuki
@ 2021-04-10 20:18 ` 4ricci
2021-04-11 2:49 ` straw-viewer: replace with pipe-viewer ericonr
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-04-10 20:18 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1664 bytes --]
There is an updated pull request by 4ricci against master on the void-packages repository
https://github.com/4ricci/void-packages pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
pipe-viewer: update to 0.0.8; straw-viewer: remove package
- pipe-viewer: update to 0.0.8
- straw-viewer: remove package
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29393.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipe-viewer-29393.patch --]
[-- Type: text/x-diff, Size: 3266 bytes --]
From 36d220b9dee54ff7436ff8b4dc1b6523a326ca14 Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 11:50:24 +0100
Subject: [PATCH 1/2] pipe-viewer: update to 0.0.8
---
srcpkgs/pipe-viewer/template | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipe-viewer/template b/srcpkgs/pipe-viewer/template
index 32991f6806bc..51712b725b33 100644
--- a/srcpkgs/pipe-viewer/template
+++ b/srcpkgs/pipe-viewer/template
@@ -1,11 +1,10 @@
# Template file for 'pipe-viewer'
pkgname=pipe-viewer
-version=0.0.7
+version=0.0.8
revision=1
build_style=perl-ModuleBuild
configure_args="--gtk"
hostmakedepends="perl-Module-Build"
-makedepends="perl"
depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu
perl-Unicode-LineBreak perl-JSON-XS"
checkdepends="perl-Test-Pod"
@@ -15,7 +14,7 @@ license="Artistic-2.0"
homepage="https://github.com/trizen/pipe-viewer"
changelog="https://github.com/trizen/pipe-viewer/releases"
distfiles="https://github.com/trizen/pipe-viewer/archive/${version}.tar.gz"
-checksum=5e1211ec963aa2a187bcb0983227c5667e6c580bfc9de93dcb582388cc1baf22
+checksum=a8d4c1d15d8d8ab7142d5bc25e6c9b988f5203f70676717a48eb12516ec86806
pipe-viewer-gtk_package() {
depends="${sourcepkg}>=${version}_${revision} perl-Gtk3 perl-File-ShareDir"
From f0677e58fa7912df46d726ee1b452139be703138 Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Thu, 11 Mar 2021 23:28:00 +0100
Subject: [PATCH 2/2] straw-viewer: replace with pipe-viewer
---
srcpkgs/straw-viewer/template | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/srcpkgs/straw-viewer/template b/srcpkgs/straw-viewer/template
index b3a9137af087..49687dc30340 100644
--- a/srcpkgs/straw-viewer/template
+++ b/srcpkgs/straw-viewer/template
@@ -1,26 +1,15 @@
# Template file for 'straw-viewer'
pkgname=straw-viewer
version=0.1.3
-revision=1
-build_style=perl-ModuleBuild
-configure_args="--gtk"
-hostmakedepends="perl-Module-Build"
-makedepends="perl"
-depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu"
-short_desc="Search and stream from YouTube using the API of invidio.us"
+revision=2
+build_style=meta
+depends="pipe-viewer"
+short_desc="Search and stream from YouTube using the API of invidio.us (transitional dummy package)"
maintainer="Roberto Ricci <ricci@disroot.org>"
license="Artistic-2.0"
homepage="https://github.com/trizen/straw-viewer"
-changelog="https://github.com/trizen/straw-viewer/releases"
-distfiles="https://github.com/trizen/straw-viewer/archive/${version}.tar.gz"
-checksum=e6afc6a87578a55b17666a79b813657daac93f78aaf810d1aa03fcb4a7354bf4
gtk-straw-viewer_package() {
- depends="${sourcepkg}-${version}_${revision} perl-Gtk3 perl-File-ShareDir"
- short_desc="Gtk interface to search and stream YouTube using the API of invidio.us"
- pkg_install() {
- vmove usr/bin/gtk-straw-viewer
- vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/gtk-*"
- vmove usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/icons
- }
+ depends="pipe-viewer-gtk"
+ short_desc="Gtk interface to search and stream YouTube using the API of invidio.us (transitional dummy package)"
}
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (3 preceding siblings ...)
2021-04-10 20:18 ` [PR PATCH] [Updated] " 4ricci
@ 2021-04-11 2:49 ` ericonr
2021-04-12 9:57 ` 4ricci
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: ericonr @ 2021-04-11 2:49 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 300 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/29393#issuecomment-817238057
Comment:
I think this should have a comment explaining that it's a separate package due to versioning? Since otherwise it would have been a subpackage of `pipe-viewer`.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (4 preceding siblings ...)
2021-04-11 2:49 ` straw-viewer: replace with pipe-viewer ericonr
@ 2021-04-12 9:57 ` 4ricci
2021-04-14 12:37 ` ericonr
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-04-12 9:57 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 368 bytes --]
New comment by 4ricci on void-packages repository
https://github.com/void-linux/void-packages/pull/29393#issuecomment-817670519
Comment:
> I think this should have a comment explaining that it's a separate package due to versioning? Since otherwise it would have been a subpackage of `pipe-viewer`.
Do you mean a comment in the template or in the commit message?
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (5 preceding siblings ...)
2021-04-12 9:57 ` 4ricci
@ 2021-04-14 12:37 ` ericonr
2021-04-14 16:47 ` [PR PATCH] [Updated] " 4ricci
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: ericonr @ 2021-04-14 12:37 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 242 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/29393#issuecomment-819484687
Comment:
> Do you mean a comment in the template or in the commit message?
I think in the commit is enough.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Updated] straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (6 preceding siblings ...)
2021-04-14 12:37 ` ericonr
@ 2021-04-14 16:47 ` 4ricci
2021-06-02 7:01 ` 4ricci
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-04-14 16:47 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1581 bytes --]
There is an updated pull request by 4ricci against master on the void-packages repository
https://github.com/4ricci/void-packages pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
straw-viewer: replace with pipe-viewer
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29393.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipe-viewer-29393.patch --]
[-- Type: text/x-diff, Size: 2091 bytes --]
From 43bcd7ada4326f78e0c51186d8c19a7988fbc6bc Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Sat, 10 Apr 2021 22:14:07 +0200
Subject: [PATCH] straw-viewer: replace with pipe-viewer
Since pipe-viewer-0.0.8, straw-viewer is deprecated.
The latter could not become a subpackage of pipe-viewer because of
different versioning, so it keeps its own template.
---
srcpkgs/straw-viewer/template | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/srcpkgs/straw-viewer/template b/srcpkgs/straw-viewer/template
index b3a9137af087..49687dc30340 100644
--- a/srcpkgs/straw-viewer/template
+++ b/srcpkgs/straw-viewer/template
@@ -1,26 +1,15 @@
# Template file for 'straw-viewer'
pkgname=straw-viewer
version=0.1.3
-revision=1
-build_style=perl-ModuleBuild
-configure_args="--gtk"
-hostmakedepends="perl-Module-Build"
-makedepends="perl"
-depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu"
-short_desc="Search and stream from YouTube using the API of invidio.us"
+revision=2
+build_style=meta
+depends="pipe-viewer"
+short_desc="Search and stream from YouTube using the API of invidio.us (transitional dummy package)"
maintainer="Roberto Ricci <ricci@disroot.org>"
license="Artistic-2.0"
homepage="https://github.com/trizen/straw-viewer"
-changelog="https://github.com/trizen/straw-viewer/releases"
-distfiles="https://github.com/trizen/straw-viewer/archive/${version}.tar.gz"
-checksum=e6afc6a87578a55b17666a79b813657daac93f78aaf810d1aa03fcb4a7354bf4
gtk-straw-viewer_package() {
- depends="${sourcepkg}-${version}_${revision} perl-Gtk3 perl-File-ShareDir"
- short_desc="Gtk interface to search and stream YouTube using the API of invidio.us"
- pkg_install() {
- vmove usr/bin/gtk-straw-viewer
- vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/gtk-*"
- vmove usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/icons
- }
+ depends="pipe-viewer-gtk"
+ short_desc="Gtk interface to search and stream YouTube using the API of invidio.us (transitional dummy package)"
}
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Updated] straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (7 preceding siblings ...)
2021-04-14 16:47 ` [PR PATCH] [Updated] " 4ricci
@ 2021-06-02 7:01 ` 4ricci
2021-08-12 7:31 ` [PR PATCH] [Closed]: " 4ricci
2021-09-03 12:23 ` 4ricci
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-06-02 7:01 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1581 bytes --]
There is an updated pull request by 4ricci against master on the void-packages repository
https://github.com/4ricci/void-packages pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
straw-viewer: replace with pipe-viewer
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/29393.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipe-viewer-29393.patch --]
[-- Type: text/x-diff, Size: 2091 bytes --]
From 72cc8c0b531e46f9ef17cb37e9ce8219ee709dcd Mon Sep 17 00:00:00 2001
From: Roberto Ricci <ricci@disroot.org>
Date: Sat, 10 Apr 2021 22:14:07 +0200
Subject: [PATCH] straw-viewer: replace with pipe-viewer
Since pipe-viewer-0.0.8, straw-viewer is deprecated.
The latter could not become a subpackage of pipe-viewer because of
different versioning, so it keeps its own template.
---
srcpkgs/straw-viewer/template | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/srcpkgs/straw-viewer/template b/srcpkgs/straw-viewer/template
index b3a9137af087..49687dc30340 100644
--- a/srcpkgs/straw-viewer/template
+++ b/srcpkgs/straw-viewer/template
@@ -1,26 +1,15 @@
# Template file for 'straw-viewer'
pkgname=straw-viewer
version=0.1.3
-revision=1
-build_style=perl-ModuleBuild
-configure_args="--gtk"
-hostmakedepends="perl-Module-Build"
-makedepends="perl"
-depends="perl-Data-Dump perl-JSON perl-LWP-Protocol-https perl-Term-ReadLine-Gnu"
-short_desc="Search and stream from YouTube using the API of invidio.us"
+revision=2
+build_style=meta
+depends="pipe-viewer"
+short_desc="Search and stream from YouTube using the API of invidio.us (transitional dummy package)"
maintainer="Roberto Ricci <ricci@disroot.org>"
license="Artistic-2.0"
homepage="https://github.com/trizen/straw-viewer"
-changelog="https://github.com/trizen/straw-viewer/releases"
-distfiles="https://github.com/trizen/straw-viewer/archive/${version}.tar.gz"
-checksum=e6afc6a87578a55b17666a79b813657daac93f78aaf810d1aa03fcb4a7354bf4
gtk-straw-viewer_package() {
- depends="${sourcepkg}-${version}_${revision} perl-Gtk3 perl-File-ShareDir"
- short_desc="Gtk interface to search and stream YouTube using the API of invidio.us"
- pkg_install() {
- vmove usr/bin/gtk-straw-viewer
- vmove "usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/gtk-*"
- vmove usr/share/perl5/vendor_perl/auto/share/dist/WWW-StrawViewer/icons
- }
+ depends="pipe-viewer-gtk"
+ short_desc="Gtk interface to search and stream YouTube using the API of invidio.us (transitional dummy package)"
}
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Closed]: straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (8 preceding siblings ...)
2021-06-02 7:01 ` 4ricci
@ 2021-08-12 7:31 ` 4ricci
2021-09-03 12:23 ` 4ricci
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-08-12 7:31 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1423 bytes --]
There's a closed pull request on the void-packages repository
straw-viewer: replace with pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PR PATCH] [Closed]: straw-viewer: replace with pipe-viewer
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
` (9 preceding siblings ...)
2021-08-12 7:31 ` [PR PATCH] [Closed]: " 4ricci
@ 2021-09-03 12:23 ` 4ricci
10 siblings, 0 replies; 12+ messages in thread
From: 4ricci @ 2021-09-03 12:23 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1423 bytes --]
There's a closed pull request on the void-packages repository
straw-viewer: replace with pipe-viewer
https://github.com/void-linux/void-packages/pull/29393
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-09-03 12:23 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-11 11:11 [PR PATCH] pipe-viewer: update to 0.0.8; straw-viewer: remove package 4ricci
2021-03-11 19:41 ` Chocimier
2021-03-11 22:35 ` [PR PATCH] [Updated] " 4ricci
2021-04-10 14:58 ` FollieHiyuki
2021-04-10 20:18 ` [PR PATCH] [Updated] " 4ricci
2021-04-11 2:49 ` straw-viewer: replace with pipe-viewer ericonr
2021-04-12 9:57 ` 4ricci
2021-04-14 12:37 ` ericonr
2021-04-14 16:47 ` [PR PATCH] [Updated] " 4ricci
2021-06-02 7:01 ` 4ricci
2021-08-12 7:31 ` [PR PATCH] [Closed]: " 4ricci
2021-09-03 12:23 ` 4ricci
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).