[PR PATCH] python-enum34: update to 1.1.10

[PR PATCH] python-enum34: update to 1.1.10

[heliocat]

[-- Attachment #1: Type: text/plain, Size: 1598 bytes --]

There is a new pull request by heliocat against master on the void-packages repository

https://github.com/heliocat/void-packages python-enum34
https://github.com/void-linux/void-packages/pull/30755

python-enum34: update to 1.1.10
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->

#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [x] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl

@asergi 

A patch file from https://github.com/void-linux/void-packages/pull/30755.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-python-enum34-30755.patch --]
[-- Type: text/x-diff, Size: 1340 bytes --]

From c058515cbc815ba242d9c714bf8d633a64b93eae Mon Sep 17 00:00:00 2001
From: Colin Booth <colin@heliocat.net>
Date: Sat, 8 May 2021 17:25:33 -0700
Subject: [PATCH] python-enum34: update to 1.1.10

---
 srcpkgs/python-enum34/template | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/srcpkgs/python-enum34/template b/srcpkgs/python-enum34/template
index 99ca2ade67a1..f8a23dfad807 100644
--- a/srcpkgs/python-enum34/template
+++ b/srcpkgs/python-enum34/template
@@ -1,22 +1,21 @@
 # Template file for 'python-enum34'
 pkgname=python-enum34
-version=1.1.6
-revision=2
+version=1.1.10
+revision=1
 wrksrc="enum34-${version}"
 build_style=python2-module
 hostmakedepends="python-setuptools"
 depends="python"
-pycompile_module="enum"
 short_desc="Backport of Python 3.4 enum module"
 maintainer="Alessio Sergi <al3hex@gmail.com>"
-homepage="https://bitbucket.org/stoneleaf/enum34"
 license="3-clause-BSD"
+homepage="https://bitbucket.org/stoneleaf/enum34"
 distfiles="${PYPI_SITE}/e/enum34/enum34-${version}.tar.gz"
-checksum=8ad8c4783bf61ded74527bffb48ed9b54166685e4230386a9ed9b1279e2df5b1
+checksum=cce6a7477ed816bd2542d03d53db9f0db935dd013b70f336a95c73979289f248
 
 pre_build() {
 	# remove doc
-	sed -i "/'enum' :/,+6d" setup.py
+	vsed -i "/'enum' :/,+6d" setup.py
 }
 post_install() {
 	vlicense enum/LICENSE

Re: [PR PATCH] [Updated] python-enum34: update to 1.1.10

[heliocat]

[-- Attachment #1: Type: text/plain, Size: 1603 bytes --]

There is an updated pull request by heliocat against master on the void-packages repository

https://github.com/heliocat/void-packages python-enum34
https://github.com/void-linux/void-packages/pull/30755

python-enum34: update to 1.1.10
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->

#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [x] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl

@asergi 

A patch file from https://github.com/void-linux/void-packages/pull/30755.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-python-enum34-30755.patch --]
[-- Type: text/x-diff, Size: 1313 bytes --]

From fb743c83e1790e3612546fb9f590b9b13e8289ab Mon Sep 17 00:00:00 2001
From: Colin Booth <colin@heliocat.net>
Date: Sat, 8 May 2021 17:25:33 -0700
Subject: [PATCH] python-enum34: update to 1.1.10

---
 srcpkgs/python-enum34/template | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/srcpkgs/python-enum34/template b/srcpkgs/python-enum34/template
index 99ca2ade67a1..64f503c29ddc 100644
--- a/srcpkgs/python-enum34/template
+++ b/srcpkgs/python-enum34/template
@@ -1,22 +1,21 @@
 # Template file for 'python-enum34'
 pkgname=python-enum34
-version=1.1.6
-revision=2
+version=1.1.10
+revision=1
 wrksrc="enum34-${version}"
 build_style=python2-module
 hostmakedepends="python-setuptools"
 depends="python"
-pycompile_module="enum"
 short_desc="Backport of Python 3.4 enum module"
 maintainer="Alessio Sergi <al3hex@gmail.com>"
+license="BSD-3-Clause"
 homepage="https://bitbucket.org/stoneleaf/enum34"
-license="3-clause-BSD"
 distfiles="${PYPI_SITE}/e/enum34/enum34-${version}.tar.gz"
-checksum=8ad8c4783bf61ded74527bffb48ed9b54166685e4230386a9ed9b1279e2df5b1
+checksum=cce6a7477ed816bd2542d03d53db9f0db935dd013b70f336a95c73979289f248
 
 pre_build() {
 	# remove doc
-	sed -i "/'enum' :/,+6d" setup.py
+	vsed -i "/'enum' :/,+6d" setup.py
 }
 post_install() {
 	vlicense enum/LICENSE

Re: python-enum34: update to 1.1.10

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 215 bytes --]

New comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/30755#issuecomment-835664392

Comment:
Homepage doesn't seem to be working https://bitbucket.org/stoneleaf/enum34

Re: [PR PATCH] [Updated] python-enum34: update to 1.1.10

[heliocat]

[-- Attachment #1: Type: text/plain, Size: 1603 bytes --]

There is an updated pull request by heliocat against master on the void-packages repository

https://github.com/heliocat/void-packages python-enum34
https://github.com/void-linux/void-packages/pull/30755

python-enum34: update to 1.1.10
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->

#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [x] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl

@asergi 

A patch file from https://github.com/void-linux/void-packages/pull/30755.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-python-enum34-30755.patch --]
[-- Type: text/x-diff, Size: 1360 bytes --]

From aae16e6e9ab17700fcc4c899d3531b92a1a38d16 Mon Sep 17 00:00:00 2001
From: Colin Booth <colin@heliocat.net>
Date: Sat, 8 May 2021 17:25:33 -0700
Subject: [PATCH] python-enum34: update to 1.1.10

---
 srcpkgs/python-enum34/template | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/srcpkgs/python-enum34/template b/srcpkgs/python-enum34/template
index 99ca2ade67a1..55894323fbbe 100644
--- a/srcpkgs/python-enum34/template
+++ b/srcpkgs/python-enum34/template
@@ -1,22 +1,21 @@
 # Template file for 'python-enum34'
 pkgname=python-enum34
-version=1.1.6
-revision=2
+version=1.1.10
+revision=1
 wrksrc="enum34-${version}"
 build_style=python2-module
 hostmakedepends="python-setuptools"
 depends="python"
-pycompile_module="enum"
 short_desc="Backport of Python 3.4 enum module"
 maintainer="Alessio Sergi <al3hex@gmail.com>"
-homepage="https://bitbucket.org/stoneleaf/enum34"
-license="3-clause-BSD"
+license="BSD-3-Clause"
+homepage="https://pypi.org/project/enum34/"
 distfiles="${PYPI_SITE}/e/enum34/enum34-${version}.tar.gz"
-checksum=8ad8c4783bf61ded74527bffb48ed9b54166685e4230386a9ed9b1279e2df5b1
+checksum=cce6a7477ed816bd2542d03d53db9f0db935dd013b70f336a95c73979289f248
 
 pre_build() {
 	# remove doc
-	sed -i "/'enum' :/,+6d" setup.py
+	vsed -i "/'enum' :/,+6d" setup.py
 }
 post_install() {
 	vlicense enum/LICENSE

Re: python-enum34: update to 1.1.10

[heliocat]

[-- Attachment #1: Type: text/plain, Size: 256 bytes --]

New comment by heliocat on void-packages repository

https://github.com/void-linux/void-packages/pull/30755#issuecomment-835706687

Comment:
Yeah, I've caught a number of things that were like that, but missed this one. Moving it to the pypi project page.

Re: [PR PATCH] [Merged]: python-enum34: update to 1.1.10

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 1439 bytes --]

There's a merged pull request on the void-packages repository

python-enum34: update to 1.1.10
https://github.com/void-linux/void-packages/pull/30755

Description:
<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->

#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [x] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl

@asergi